EP3C25F324C6 - Cyclone III FPGA, 24624 LEs, 324-BGA
MPN: EP3C25F324C6 ✓ چالاکEP3C25F324C6 گشتی
A field-programmable gate array is a semiconductor whose digital behavior is defined after fabrication through configuration data rather than a fixed circuit mask. The Cyclone III family combines programmable logic blocks, general-purpose memory, and user I/O in one device. This makes an FPGA suitable when a design needs adaptable interfaces, parallel data processing, protocol bridging, or logic replication without fabricating a dedicated application-specific integrated circuit.
The EP3C25F324C6 provides 24,624 logic elements and 608,256 bits of embedded memory. The listed 215 I/O count supports high-density connections to external memory, transceivers, converters, and control peripherals. The 500 MHz device speed grade indicates the maximum timing-performance class, although the operating frequency of a complete design still depends on the selected logic path, logic utilization, timing constraints, I/O standard, and board-level signal integrity.
The device is manufactured on a 65 nm CMOS process and operates from a 1.2 V core supply. Its 324-BGA package provides a dense mechanical interface for multilayer printed circuit boards. The package pitch is listed as 1 mm with a 19 mm by 19 mm body in the device documentation. Correct assembly therefore requires a PCB land pattern and via arrangement capable of supporting the fine-pitch BGA geometry.
Typical uses include industrial control and automation, communications infrastructure, embedded signal processing, data acquisition, and general-purpose logic prototyping. In these systems, the programmable architecture permits parallel interfaces and reusable control logic, while embedded memory can support buffering, packet handling, and data acquisition functions. The large I/O count is especially useful where a design must connect several buses or peripheral devices simultaneously.
Design with the EP3C25F324C6 by checking every bank voltage and pin assignment against the selected configuration scheme. Maximum I/O availability can vary by package and configuration mode, so the device pin-assignment table should be treated as authoritative. Decoupling, layer transitions, ball escape routing, and BGA assembly constraints also require close review before a four-layer or multilayer board is released.
This product page combines the exact EP3C25F324C6 device identity, package information, searchable sourcing questions, same-family alternatives, and practical FPGA design considerations. It also distinguishes verified device facts from parameters that require the manufacturer handbook, pin-assignment files, or Quartus implementation results for final design validation.
جێگرەوەکانی جێگۆڕکێ بۆ EP3C25F324C6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EP3C25F324C6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Process Technology, Device Type, Package Shape.
EP3C25F324C7
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP3C25F324C7N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP3C25F324C6N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP3C25F324C6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Cyclone III Field Programmable Gate Array |
| Logic Elements | 24,624 |
| Embedded Memory | 608,256 bits |
| I/O Count | 215 |
| Memory Blocks | 24624 |
| Device Speed Grade | 500 MHz |
| Process Technology | 65 nm CMOS |
| Core Voltage | 1.2 V |
| پاکێج | 324-BGA |
| Package Body Size | 19 mm x 19 mm |
| Package Ball Pitch | 1 mm |
| جۆری دامەزراندن | Surface Mount |
| Device Family | Cyclone III |
| دۆخی RoHS | Compliant |
ڕێنمایی ڕێکخستنی پینی EP3C25F324C6 1 mm
ڕێکخستنی پین بۆ EP3C25F324C6 (پاکێجی 1 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EP3C25F324C6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EP3C25F324C6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Control and Automation, Communications Infrastructure, Data Acquisition and Signal Conditioning, Embedded Video Processing, Audio Processing, FPGA Education and Logic Prototyping.
Industrial Control and Automation
The EP3C25F324C6 fits industrial control logic that requires programmable sequencing, parallel device interfacing, and local data handling. Its 24,624 logic elements can implement control state machines and protocol adapters, while 608,256 bits of embedded memory can support buffering or sampled-data organization. The 215-I/O device provides substantial connectivity for sensors, actuators, communication transceivers, and data converters. The 500 MHz speed class is useful for timing-critical parallel logic, although the actual clock rate must be validated through static timing analysis. Before schematic capture, verify every bank voltage, differential I/O requirement, and configuration-dependent pin restriction against the device tables.
پێشنیارکراو
Communications Infrastructure
The EP3C25F324C6 is suitable for communications line cards, protocol bridges, and packet-processing modules that combine configurable logic with multiple external interfaces. Its 24,624 logic elements can support framing, state management, and interface conversion, while the 608,256-bit memory budget can accommodate shallow packet or transaction buffering. With 215 I/O listed for the package, the device can connect parallel data buses, control signals, and high-speed serial transceiver lanes. For communications designs, use the exact pin-assignment file because configuration mode and speed grade can alter I/O availability, and complete timing analysis for every implemented clock domain.
پێشنیارکراو
Data Acquisition and Signal Conditioning
The EP3C25F324C6 can implement deterministic control and acquisition logic around parallel converters and sensors. The 24,624 logic elements provide capacity for trigger sequencing, channel multiplexing, digital filtering, and data-format conversion, while 608,256 bits of embedded memory can hold temporary acquisition records or calibration tables. Its 215 I/O offers broad connectivity for multiplexed data buses and control signals in instrument-grade systems. Design constraints must still be derived from the exact bank assignments and selected I/O standards. Separate analog and digital return paths, observe interface timing requirements, and use Quartus timing analysis to ensure that capture paths meet the acquisition system’s sampling targets.
پێشنیارکراو
Embedded Video Processing
The EP3C25F324C6 can be evaluated for pixel transport, synchronization, and control functions in embedded video systems requiring programmable digital logic. The 24,624 logic elements are suited to parallel timing generation, word assembly, and status handling, while the 608,256-bit embedded memory can provide line buffers or stream-isolation storage. The 215-I/O interface count supports parallel pixel buses and control signals, and the 500 MHz device class offers a useful timing baseline for synchronous logic. Video feasibility still depends on logic balance, available RAM blocks, external memory interfaces, and the selected clocking architecture. Validate horizontal and vertical timing with representative streaming before committing to production.
پێشنیارکراو
Audio Processing
The EP3C25F324C6 is suitable for programmable digital audio routing, clock-domain management, and interface-format conversion. Its 24,624 logic elements can implement sample-rate conversion logic, channel routing, and control sequencing, while 608,256 bits of embedded memory can support short audio buffers or intermediate processing stages. The 215 I/O provides enough parallel connectivity for multiple digital audio interfaces and control lines in a compact implementation. Clocking and data timing must be designed carefully because serial audio interfaces depend on precise phase relationships and low jitter. Use dedicated clock resources where required and confirm that each external transceiver supplies the voltage, impedance, and direction requirements of its assigned FPGA bank.
پێشنیارکراو
FPGA Education and Logic Prototyping
The EP3C25F324C6 provides a practical platform for FPGA education, processor-bus experiments, and reusable logic prototyping. With 24,624 logic elements, 608,256 bits of embedded memory, and 215 I/O, students can implement counters, UARTs, FIFO structures, arithmetic pipelines, and peripheral interfaces without building a custom ASIC. The 500 MHz device class supports instructive timing experiments involving pipelining, constraints, and clock-domain crossings. For classroom boards, verify the configuration flash interface, JTAG topology, bank voltages, and exposed user I/O in the Quartus board file. Keep each laboratory design within the fitted resource limits and use static timing reports to distinguish functional correctness from timing correctness.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EP3C25F324C6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EP3C25F324C7 | EP3C25F324C7N | EP3C25F324C6N |
|---|---|---|---|---|
| Device Type | Cyclone III FPGA | Cyclone III FPGA | Cyclone III FPGA | Cyclone III FPGA |
| Brand | Altera | Altera | Altera | Altera |
| Package | 324-BGA | 324-BGA | 324-BGA | 324-BGA |
| Device Speed Class | 500 MHz | 500 MHz | 500 MHz | 500 MHz |
جیاکەرەوە سەرەکییەکان
- Exact 500 MHz Cyclone III ordering configuration (بەراورد بەEP3C25F324C7)
- Established 324-BGA mechanical format (بەراورد بەEP3C25F324C7N)
- Direct fit for a design requiring the C6 ordering identity (بەراورد بەEP3C25F324C6N)
تێبینییەکانی دیزاین
Treat the 324-BGA land pattern as a manufacturing-controlled interface. The listed package body is 19 mm by 19 mm with 1 mm ball pitch, so PCB design rules, solder-mask definition, paste deposits, via-in-pad usage, and assembly profile must be coordinated with the selected board process. Use the official package drawing and assembly guidelines for exact ball locations, and include test access that does not interfere with the component-side assembly.
Plan the 1.2 V core rail and all I/O bank supplies as separate power-distribution concerns. Verify permitted voltage combinations, current limits, sequencing requirements, and the exact configuration scheme in the manufacturer handbook before assigning banks. Place bulk and high-frequency decoupling close to the relevant supply and ground balls, while maintaining a low-impedance return path between power, ground, and device planes.
Configuration mode can change the maximum user-I/O count and the availability of clock input pins. Reserve every configuration, programming, and dedicated power ball according to the exact device pin-assignment file rather than the nominal 215-I/O figure. Check all high-speed routing for length matching, reference-plane continuity, via stubs, and connector or BGA breakout effects before finalizing signal-integrity simulations.
Do not assume that the 500 MHz speed class guarantees a 500 MHz system clock. A practical operating frequency is constrained by the longest timing path, logic depth, placement, routing congestion, I/O standards, memory timing, and clock uncertainty. Use realistic timing constraints, complete static timing analysis, and review unconstrained paths in Quartus before treating the design as timing-closed.
زانیاری پابەندبوون
The product catalog listing identifies EP3C25F324C6 as RoHS compliant. No additional environmental, automotive, halogen-free, or conflict-minerals declarations are established.