Intel

EP3C25U256C6 - 24,624 LEs Cyclone III FPGA | Intel

MPN: EP3C25U256C6 ✓ چالاک
1.2 V Vdss 256-LFBGA Package 472.5 MHz Speed 608,256 bits Memory
MOQ: 1 |

EP3C25U256C6 گشتی

The Intel EP3C25U256C6 is a Cyclone III field-programmable gate array with 24,624 logic elements, 608,256 bits of embedded memory, 156 I/O, a 1.2 V supply requirement, and a maximum stated clock frequency of 472.5 MHz. It is packaged in a 256-ball LFBGA measuring approximately 14 mm by 14 mm with a 0.80 mm ball pitch.

A field-programmable gate array, or FPGA, is a programmable semiconductor in which digital logic is configured after fabrication. An FPGA belongs to the broader hierarchy of programmable logic devices, digital integrated circuits, and semiconductors. Cyclone III devices combine configurable logic blocks, embedded RAM, programmable input/output resources, and dedicated clock and power-management circuitry, allowing one package to implement control, interface, signal-processing, or communications functions.

Key device attributes include 24,624 logic cells, 156 I/O, and 608,256 embedded-memory bits. The 156 I/O support board-level connections to external memory, interfaces, converters, and digital control signals. The 256-LFBGA package provides dense PCB routing and adequate clearance for high-speed design work, although its fine 0.80 mm pitch demands careful fanout, assembly planning, and inspection.

The EP3C25U256C6 operates from a 1.2 V supply and is identified with a C6 speed designation. Its stated maximum clock frequency is 472.5 MHz, while the operating temperature shown in product information reaches 85°C. These figures make the device suitable for designs requiring substantial programmable logic and memory in a single compact package. Designers must still evaluate timing closure, power integrity, thermal behavior, and I/O standards for the target system.

Typical applications include industrial control systems, communications infrastructure, video and image processing, embedded instrumentation, and general-purpose digital signal processing. In each case, designers select the device based on logic capacity, pin availability, memory requirements, clock targets, supported interfaces, and the toolchain needed to implement and verify the design.

A critical implementation consideration is the dense 256-ball land pattern. Route power and ground with low-impedance planes, keep sensitive clock and configuration paths short, follow the manufacturer’s pin-connection and decoupling guidance, and verify the assembled board for shorts and assembly defects before programming.

This product record combines the device’s principal electrical, logical, packaging, and thermal characteristics with application guidance, same-family migration options, and practical PCB considerations. It supports faster initial part screening while directing final selection work toward the manufacturer datasheet and the specific system requirements.

جێگرەوەکانی جێگۆڕکێ بۆ EP3C25U256C6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EP3C25U256C6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package Type, Logic Cells, Operating Temperature, Terminal Count.

Altera
Package Type: 256-LBGA
Operating Temperature: -40°C to +125°C
بەراوردکردن لەگەڵ EP3C25U256C6 →
Altera
Package Type: UBGA
Logic Cells: 24,624 cells
Terminal Count: 256 terminals
بەراوردکردن لەگەڵ EP3C25U256C6 →

EP3C25F256C7N

✅ جێگرەوەی ڕاستەوخۆ
📦 256-LFBGA
C7 configuration is one speed grade above the target’s C6 grade; logic, memory, I/O, supply, and 256-ball package remain the relevant matching constraints.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

EP3C25F256C7

✅ جێگرەوەی ڕاستەوخۆ
Altera
📦 256-LFBGA
Field Programmable Gate Array (FPGA) · Cyclone III · 24,624 logic elements · 156 logic blocks · 608,256 bits · 256-LBGA · FBGA-256 · 256 pins

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EP3C25U256C7N

✅ جێگرەوەی ڕاستەوخۆ
📦 256-LFBGA
C7 configuration is one speed grade above the target’s C6 grade; the 256-LFBGA footprint preserves the board-level migration path.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

EP3C25U256C7NES

✅ جێگرەوەی ڕاستەوخۆ
📦 256-LFBGA
C7 configuration is one speed grade above the target’s C6 grade while maintaining the 256-ball package and corresponding Cyclone III resource class.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

EP3C25U256C8N

✅ جێگرەوەی ڕاستەوخۆ
📦 256-LFBGA
C8 configuration is two speed grades above the target’s C6 grade; the same 256-ball package supports footprint-compatible migration with revised timing review.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

EP3C25U256C6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Device Type Field Programmable Gate Array (FPGA)
FPGA Family Cyclone III
Logic Cells 24,624
Embedded Memory 608,256 bits
Input/Output Count 156
زۆرترین فرێکوێنسیی کاتژمێر 472.5 MHz
ڤۆڵتیەی دابینکردن 1.2 V
پلەی گەرمیی کارکردن 85°C
Package Type 256-LFBGA
Package Dimensions 14 mm × 14 mm
Ball Pitch 0.80 mm
Terminal Count 256
Terminal Form Ball
Package Shape Square
جۆری دامەزراندن Surface Mount
Manufacturer Intel / Altera

ڕێنمایی ڕێکخستنی پینی EP3C25U256C6 square

ڕێکخستنی پین بۆ EP3C25U256C6 (پاکێجی square). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی square بۆ EP3C25U256C6

هیچ داتای وردی پینئاوت بەردەست نییە بۆ EP3C25U256C6.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

EP3C25U256C6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Control and Automation, Communications and Network Interfaces, Video and Image Processing, Embedded Instrumentation, Embedded Signal Processing, Programmable Interface Consolidation.

🏭

Industrial Control and Automation

The EP3C25U256C6 fits compact industrial controllers that combine sequential control, communications, diagnostics, and data logging in one programmable device. Its 24,624 logic cells provide substantial capacity for state machines, protocol handling, and supervisory logic, while 608,256 bits of embedded memory support buffering and local data handling. The 156 I/O offer connection points for sensors, actuators, field buses, and status indicators without relying on multiple discrete controllers. Using the 1.2 V device supply and 256-LFBGA package allows a controlled industrial design to consolidate functions while preserving deterministic FPGA timing. Engineers should verify logic-element and memory utilization in the implementation tools, then test worst-case timing, I/O behavior, and fault recovery across the intended operating conditions.

🌐

Communications and Network Interfaces

The EP3C25U256C6 is suitable for programmable communications interfaces that must handle packet filtering, line-rate control logic, framing, and protocol conversion. Its 24,624 logic cells can support parallel datapaths and control state machines, while the 608,256-bit embedded-memory total can be divided among transmit and receive buffers. The device’s 156 I/O provide connectivity for data buses, clocks, status signals, and external interface components. A Cyclone III implementation is especially useful when adjustable logic and I/O assignments offer more flexibility than a fixed-function controller. The 472.5 MHz stated clock capability provides a timing-planning target, but actual throughput depends on the selected pins, I/O standards, routing, and external transceiver performance. Engineers should complete static timing analysis and verify protocol compliance at the required line rates.

📺

Video and Image Processing

The EP3C25U256C6 supports parallel image-processing pipelines that require configurable logic, local buffering, and high-speed external data capture. Its 24,624 logic cells can implement pixel manipulation, color conversion, thresholding, filtering, and control functions, while 608,256 bits of embedded memory provide configurable local storage. With 156 I/O, the device can interface with image sensors, parallel ADC or DAC devices, and memory interfaces while implementing acquisition control in programmable logic. The 1.2 V core supply and 256-LFBGA package support dense, high-performance board layouts, although the 0.80 mm ball pitch requires disciplined escape routing and assembly planning. Engineers should evaluate pixel-clock timing, I/O standards, memory bandwidth, and power integrity, using the manufacturer pin table to define every external connection.

🔧

Embedded Instrumentation

The EP3C25U256C6 is appropriate for programmable measurement and signal-conditioning front ends where acquisition sequencing, calibration, filtering, and backend communication must operate deterministically. The 24,624 logic cells support parallel processing channels and complex control logic, while the 608,256 bits of embedded memory can buffer samples between acquisition stages. Its 156 I/O support analog-device controls, digital measurement signals, clocks, and isolated communication links. Compared with a microcontroller-centered design, FPGA logic can place time-critical sampling and filtering directly beside the signal chain, reducing dependence on sequential software timing. The 472.5 MHz stated device clock must not be interpreted as the guaranteed sample rate; usable bandwidth also depends on I/O specifications, external converters, pipelines, and timing margins. Engineers should perform channel-by-channel timing analysis and verify calibration behavior across the required temperature range.

⚡

Embedded Signal Processing

The EP3C25U256C6 is well suited to fixed-function digital signal processing implemented through configurable FPGA logic. Engineers can use its 24,624 logic cells for parallel arithmetic, filters, correlation, modulation, or digital control pipelines, and allocate the stated 608,256 bits of embedded memory for coefficients, circular buffers, or intermediate results. The 156 I/O allow high-throughput parallel data paths without forcing all transfers through an external processor. The 1.2 V supply supports compact power architecture, while the 256-LFBGA package minimizes board area compared with larger-lead-count devices. The design must still account for the 0.80 mm package pitch, clock jitter, I/O standards, and timing closure. Start with fixed-point architecture and pipelining analysis, then verify resource utilization and maximum operating frequency using the design compiler and timing analyzer.

🖥️

Programmable Interface Consolidation

The EP3C25U256C6 can consolidate several board-level interface functions into a single configurable Cyclone III device. Its 24,624 logic cells are suitable for protocol converters, FIFO controllers, test-pattern generation, and glue logic, while 608,256 bits of embedded memory provide local buffering between modules operating at different rates. The 156 I/O offer broad connectivity for legacy peripherals, memory devices, and external converters. This approach can reduce discrete-controller count when interfaces must be revised after board layout begins, but software support, configuration strategy, and toolchain expertise become important lifecycle considerations. The stated 472.5 MHz clock capability must be reconciled with realistic I/O timing and device loading before it is used as a system performance guarantee. Engineers should define interface timing, pin standards, power domains, and recovery behavior before committing the design to production.

What are the key specifications of EP3C25U256C6 that engineers should know?
The EP3C25U256C6 is a Cyclone III FPGA with 24,624 logic cells, 608,256 bits of embedded memory, 156 I/O, a 1.2 V supply voltage, and a stated maximum clock frequency of 472.5 MHz. According to the Altera manufacturer datasheet, the device is supplied in a 256-LFBGA package with a 0.80 mm ball pitch and an approximately 14 mm × 14 mm body. These figures define its principal logic, memory, interface, clock, and PCB-footprint constraints.
What is the operating voltage of EP3C25U256C6?
The EP3C25U256C6 operates from a 1.2 V supply. According to the Altera manufacturer datasheet, this core supply requirement must be considered alongside the complete power architecture, including internal core voltage, I/O supply domains, configuration behavior, and sequencing. The 1.2 V figure describes the device’s stated operating voltage and should not be treated as a universal value for every board-level power rail.
What is the maximum clock frequency of EP3C25U256C6?
The EP3C25U256C6 has a stated maximum clock frequency of 472.5 MHz. According to the Altera manufacturer datasheet, this is a device capability figure rather than a guaranteed operating point for every implemented design. Actual clock performance depends on the selected speed grade, power conditions, timing constraints, routing density, memory configuration, and whether the clock fabric and I/O paths meet the required timing margins.
How much logic and embedded memory does EP3C25U256C6 provide?
The EP3C25U256C6 provides 24,624 logic cells and 608,256 bits of embedded memory. According to the Altera manufacturer datasheet, the logic-cell count estimates the programmable logic capacity while the embedded-memory figure identifies the total stated memory bits. These values support control logic, state machines, packet processing, buffering, and moderate parallel-processing designs, but the exact register, block RAM, and routing consumption must be checked in the design tool.
What package and pin count does EP3C25U256C6 use?
The EP3C25U256C6 uses a 256-LFBGA package with 256 terminals, an approximately 14 mm × 14 mm body, and a 0.80 mm ball pitch. According to the Altera manufacturer datasheet, it is a surface-mount square package with ball terminals. The fine pitch makes land-pattern accuracy, solder-mask and paste design, assembly capability, and post-assembly inspection important considerations.
Where can I find the EP3C25U256C6 pinout and package drawing?
Use the pin-description table, package outline, and recommended land pattern in the Altera manufacturer datasheet for the EP3C25U256C6. The device has 256 terminals, so a complete board-level assignment should come directly from the manufacturer’s package information rather than a generic BGA drawing. Also check the pin table for dedicated configuration pins, power terminals, ground terminals, and user I/O before beginning PCB layout.
Where can I download the EP3C25U256C6 datasheet PDF?
The EP3C25U256C6 datasheet can be located through the device documentation linked from the manufacturer’s Cyclone III documentation. According to the Altera manufacturer datasheet, the most important sections for hardware design include the pinout, package information, power architecture, configuration guidelines, electrical characteristics, and timing specifications. Use the document revision matching the device ordering information when making production decisions.
Where can I buy EP3C25U256C6 online?
Use the Request a Quote form on this page to ask for EP3C25U256C6 availability, order quantity, and delivery options. The form is the appropriate route for obtaining a current quote and confirming the exact package, grade, and assembly requirements. Before ordering, verify that the requested 256-LFBGA configuration and EP3C25U256C6 ordering code match the device used in the design.
What is the price of EP3C25U256C6?
The current EP3C25U256C6 price depends on order quantity, procurement conditions, and the requested configuration. Use the Request a Quote form on this page for a current offer rather than relying on a stale marketplace value. Include your required quantity, target delivery date, and acceptable packaging details in the request so the commercial response reflects the actual procurement need.
What is the lead time for EP3C25U256C6?
The current lead time for EP3C25U256C6 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, device grade, assembly configuration, and procurement conditions. When submitting the request, specify the required quantity, target shipment date, and whether the complete order can accept a single delivery or requires staged scheduling.
Is EP3C25U256C6 in stock?
EP3C25U256C6 stock status should be confirmed through the Request a Quote form on this page. The form allows procurement teams to request current availability for the exact MPN and required quantity. Include the desired package and delivery schedule with the request so the response can distinguish material that is immediately schedulable from material requiring manufacturing or longer-term allocation.
EP3C25U256C6 vs EP3C25U256C7NES - which is better for a new design?
The EP3C25U256C7NES is the better choice when its C7 configuration provides the required timing margin, while the EP3C25U256C6 remains suitable when the lower C6 grade meets the design target. According to the Altera manufacturer datasheet family information, the principal indicated difference is one speed grade, with the device names identifying C6 and C7 configurations. Compare timing, power, availability, and qualification requirements before selecting the device.
When should I choose EP3C25U256C6 instead of a C7 or C8 FPGA?
Choose the EP3C25U256C6 when its C6 timing performance satisfies every critical path and the higher C7 or C8 performance is unnecessary. The C7 option represents one speed grade above C6, while the C8 option represents two speed grades above C6. According to the Altera manufacturer datasheet family information, choosing the lower grade can simplify cost and power planning, but timing closure must be confirmed with the actual constraints and tool version.
What can replace EP3C25U256C6 on the same PCB footprint?
The closest same-family drop-in candidates are the 256-device Cyclone III configurations identified in the family comparison, including EP3C25F256C7, EP3C25F256C7N, EP3C25U256C7N, EP3C25U256C7NES, and EP3C25U256C8N. According to the Altera manufacturer datasheet family information, each uses the 256-ball package, but the C6, C7, and C8 speed grades differ. Verify pin assignment, configuration, timing, power, and temperature requirements before substitution.
Can EP3C25U256C7NES replace EP3C25U256C6 without changing the PCB?
The EP3C25U256C7NES can serve as a same-package migration candidate for the EP3C25U256C6 because both are identified as 256-device Cyclone III configurations in the 256-LFBGA package. The meaningful change is the C7 speed grade versus the target’s C6 grade. According to the Altera manufacturer datasheet family information, verify every pin, configuration method, supply connection, timing constraint, and power condition before production use.
Is there a cross-brand drop-in equivalent for EP3C25U256C6?
No cross-brand drop-in equivalent can be responsibly identified from the established EP3C25U256C6 compatibility information. A valid direct replacement would require the same 256-LFBGA land pattern, pin-compatible configuration and I/O behavior, equivalent embedded-memory and logic resources, suitable supply voltage, and acceptable timing and temperature characteristics. According to the Altera manufacturer datasheet family information, same-family Intel options offer lower migration risk than an unreviewed cross-brand substitution.

داتای سەرچاوەی ئەندازیاری بۆ EP3C25U256C6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the EP3C25U256C6 when a design fits within 24,624 logic cells, 608,256 bits of embedded memory, and 156 I/O, and when a C6 speed grade provides sufficient timing margin. Select EP3C25F256C7N or EP3C25U256C7N when the PCB requires a C7-grade migration with one additional speed grade. Use EP3C25U256C7NES as another C7 candidate after confirming ordering details, temperature requirements, configuration, and power conditions. EP3C25U256C8N is appropriate when two additional speed grades are useful, but it should be selected only after timing and power analysis. Because the alternatives share the 256-device package class, they can simplify footprint migration, but a complete pin, timing, configuration, and thermal review remains mandatory. A cross-brand replacement should be considered only when an exact pin-compatible device with equivalent resources and electrical limits is established.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە EP3C25F256C7N EP3C25F256C7 EP3C25U256C7N EP3C25U256C7NES EP3C25U256C8N
Manufacturer Intel / Altera Intel / Altera Intel / Altera Intel / Altera Intel / Altera Intel / Altera
Package 256-LFBGA 256-LFBGA 256-LFBGA 256-LFBGA 256-LFBGA 256-LFBGA
Device Type Cyclone III FPGA Cyclone III FPGA Cyclone III FPGA Cyclone III FPGA Cyclone III FPGA Cyclone III FPGA
Speed Grade C6 C7 C7 C7 C7 C8

جیاکەرەوە سەرەکییەکان

  • Lower starting speed grade for designs that do not require maximum timing margin (بەراورد بەEP3C25U256C7NES)
  • One speed grade below the C8 migration option (بەراورد بەEP3C25U256C8N)
  • Consolidated programmable capacity in a 256-ball package (بەراورد بەEP3C25F256C7)

تێبینییەکانی دیزاین

The 256-LFBGA land pattern uses a 0.80 mm ball pitch and therefore requires exact footprint alignment. Use the manufacturer’s recommended land pattern, pad dimensions, solder-mask opening, and paste stencil geometry rather than deriving them from a generic BGA footprint. Check each signal against the pin table for supply, ground, configuration, clock, and user I/O assignments before routing.

The device’s stated operating supply is 1.2 V, but a Cyclone III board can contain multiple internal and I/O supply requirements. Follow the manufacturer power architecture and decoupling recommendations for every voltage rail. Keep supply and ground planes continuous, place decoupling connections with minimal loop area, and verify steady-state and transient performance across the complete clock, temperature, and I/O-loading range.

The stated 472.5 MHz clock capability makes routing and return-path discipline important. Keep clock nets short, provide continuous reference planes beneath high-speed routes, avoid splits across the FPGA, and apply the manufacturer’s recommended termination and I/O standards. Complete post-route timing analysis with realistic clock uncertainty and verify every external interface against its voltage, slew, and timing specifications.

Do not treat a higher speed-grade suffix as an automatic drop-in upgrade. A C7 candidate is one grade above the C6 target and a C8 candidate is two grades above it, but timing, power, temperature, configuration, and ordering details still require review. Confirm that the complete design meets timing closure under the replacement device before releasing a new PCB or production build.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The device information identifies Cyclone III and Intel / Altera but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

EP3C25U256C6 EP3C25U256C6 datasheet EP3C25U256C6 pinout EP3C25U256C6 datasheet pdf Intel EP3C25U256C6 EP3C25U256C6 24624 logic cells EP3C25U256C6 472.5 MHz EP3C25U256C6 256-LFBGA pinout EP3C25U256C6 equivalent EP3C25U256C6 replacement EP3C25U256C6 vs EP3C25U256C7NES EP3C25U256C6 price EP3C25U256C6 stock EP3C25U256C6 FPGA application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Intel Altera EP3C25U256C6 EP3C25F256C7N EP3C25F256C7 EP3C25U256C7N EP3C25U256C7NES EP3C25U256C8N Cyclone III FPGA field-programmable gate array programmable logic device digital integrated circuit semiconductor logic cell embedded memory general-purpose I/O LFBGA-256 BGA package surface-mount package 1.2 V supply 472.5 MHz clock industrial control communications interface digital signal processing
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ