EP3C40F484C6 - 39,600 Logic Cell Cyclone III FPGA | Intel
MPN: EP3C40F484C6 ✗ کۆتایی ژیانEP3C40F484C6 گشتی
A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. Within the broader hierarchy, an FPGA is a programmable logic device, a reconfigurable digital integrated circuit, and a semiconductor. Its configuration memory and programmable interconnect allow one physical design to support multiple logic functions through a revised bitstream. Cyclone III devices combine embedded logic resources with configurable I/O blocks, making them suitable for industrial controls, communications equipment, embedded processors, and test systems.
The EP3C40F484C6 provides 39,600 logic cells across 2,475 logic array blocks, a useful density level for designs that exceed basic programmable-logic devices while avoiding the resource requirements of much larger FPGAs. Its maximum operating frequency is listed as 315 MHz, although the achieved system clock also depends on the selected design, device speed grade, I/O path, external memory interface, timing constraints, and board implementation.
The device uses a 1.15 V to 1.25 V operating supply range and is packaged in a 484-pin fine-pitch ball grid array. A large FBGA package supports a high pin count and dense board routing, but it also requires careful PCB layout, thermal analysis, and assembly planning. The manufacturer documentation describes the device as lead-free and moisture-sensitive, making controlled handling, dry storage, reflow-profile management, and solderability inspection important manufacturing considerations.
Typical uses include industrial control logic, communication protocol conversion, embedded processing systems, instrumentation, and general-purpose digital prototyping. Engineers can implement parallel data paths, state machines, interfaces, memory controllers, and custom accelerators in the programmable fabric. The 535 I/O resources offer substantial connectivity, although actual usable I/O count depends on the power-supply arrangement, voltage standards, dedicated configuration pins, and selected device resources.
The primary engineering consideration is that the 484-pin FBGA footprint makes PCB changes difficult once layout is committed. Confirm the exact ball assignments, voltage rails, configuration interface, clock requirements, decoupling, and pin-termination guidance in the manufacturer datasheet before release. Budget adequate copper and thermal spreading for the package, and validate signal integrity on every high-speed interface because external routing can determine whether a design closes timing successfully.
This product page consolidates the device identity, package characteristics, technical-search coverage, related family members, and practical implementation guidance. It is intended to help engineers determine whether the EP3C40F484C6 fits a 484-pin Cyclone III design before moving into detailed datasheet review, Quartus design compilation, PCB validation, and prototype testing.
جێگرەوەکانی جێگۆڕکێ بۆ EP3C40F484C6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EP3C40F484C6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Operating Temperature, Package, Process Technology, RoHS Status, Mounting Type.
EP3C40F484C6N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP3C40F484C7N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP3C40F484C8N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP3C40F484C6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Series | Cyclone III |
| Logic Cells | 39,600 cells |
| Logic Array Blocks | 2,475 LABs |
| I/O Count | 535 I/Os |
| Maximum Operating Frequency | 315 MHz |
| Core Supply Voltage | 1.15 V to 1.25 V |
| Package Type | 484-pin FBGA |
| ژمارەی پین | 484 pins |
| Package Standard | MS-034 |
| شێوازی دامەزراندن | Surface Mount |
| پلەی گەرمیی کارکردن | -40°C to 125°C |
| Lead-Free Status | Lead Free |
| Moisture Sensitivity | Moisture Sensitive |
| Manufacturer | Intel / Altera |
ڕێنمایی ڕێکخستنی پینی EP3C40F484C6 ms-034
ڕێکخستنی پین بۆ EP3C40F484C6 (پاکێجی ms-034). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EP3C40F484C6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EP3C40F484C6 گونجاوە بۆ 6 بەکارھێنانs: Industrial PLC and Machine Control, Industrial Communication Gateway, Programmable Data Acquisition System, Embedded Instrumentation Controller, Digital Signal Processing Front End, Rapid Digital Prototyping.
Industrial PLC and Machine Control
The EP3C40F484C6 fits programmable machine-control logic that needs 39,600 logic cells, 2,475 logic array blocks, and 535 I/Os in one device. It can implement sequencing logic, counters, interlocks, motor-command interfaces, and data acquisition paths while retaining a -40°C to 125°C operating range. The 1.15 V to 1.25 V core supply provides a defined foundation for digital rails, while the 484-pin FBGA allows numerous external signals and dedicated interfaces to be routed without external programmable logic. Validate each I/O voltage standard and confirm that the selected speed and temperature grades match the machine environment.
پێشنیارکراو
Industrial Communication Gateway
The EP3C40F484C6 is suitable for communication gateways that combine protocol conversion, buffering, status monitoring, and host-interface logic. Its 39,600 logic cells provide substantial parallel-processing capacity, while 535 I/Os support multiple external interfaces and control signals. A designer can partition the fabric among serial engines, packet buffers, status registers, and supervisory logic rather than using several fixed-function devices. The 484-pin FBGA footprint is especially useful for systems requiring both programmable digital logic and a high connection count, although careful layer planning is needed to control return paths and simultaneous-switching noise.
پێشنیارکراو
Programmable Data Acquisition System
The EP3C40F484C6 can serve as the control and processing fabric in a programmable data-acquisition system that coordinates sampling, filtering, timestamping, and host transfer. Its 39,600 logic cells and 2,475 logic array blocks allow parallel datapaths and control functions to be combined in one configurable device. With 535 I/Os, the package can accommodate sampling-control outputs, digital sensor inputs, status indicators, and external memory or processor connections. The maximum listed frequency of 315 MHz provides a useful timing reference, but actual acquisition performance depends on the selected I/O standards, clocking scheme, and external component timing.
پێشنیارکراو
Embedded Instrumentation Controller
For embedded instrumentation, the EP3C40F484C6 can implement control sequencing, calibration tables, display drivers, keypad handling, alarm logic, and communication interfaces within a single FPGA. Its programmable fabric allows measurement pipelines to be changed without replacing a fixed ASIC, while the 535 I/Os provide extensive connectivity to sensors, converters, memory, and human-interface circuitry. The -40°C to 125°C operating range is useful for equipment exposed to varied environmental conditions. Thermal performance still depends on the final logic utilization and PCB copper area, so engineers should evaluate the placed-and-routed project under worst-case operating conditions.
پێشنیارکراو
Digital Signal Processing Front End
The EP3C40F484C6 can implement parallel digital signal-processing stages ahead of an external processor or converter. Its 39,600 logic cells support filtering, correlation, digital downconversion, decimation, and data-format conversion when those functions are mapped to parallel hardware rather than sequential firmware. The maximum listed frequency of 315 MHz establishes the device's timing capability, while 535 I/Os allow the FPGA to interface with converters, capture memory, clock sources, and synchronization logic. Clock jitter, input timing, output timing, and congestion should be evaluated in the actual Quartus compilation instead of relying on the device frequency alone.
پێشنیارکراو
Rapid Digital Prototyping
The EP3C40F484C6 supports rapid digital prototyping because designers can implement complete control, interface, and test logic in programmable hardware instead of building a fixed board for every functional revision. The 39,600 logic cells and 2,475 logic array blocks provide enough fabric for moderately complex prototypes, while 535 I/Os simplify connection to sensors, displays, test instruments, and external processors. Because the 484-pin FBGA is difficult to rework, prototype boards should follow the manufacturer land pattern, power, decoupling, clock, and configuration recommendations closely. This reduces the risk of discovering footprint or signal-integrity problems after the design has been committed to fabrication.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EP3C40F484C6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EP3C40F484C6N | EP3C40F484C7N | EP3C40F484C8N |
|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel |
| Package | 484-pin FBGA | 484-pin FBGA - same | 484-pin FBGA - same | 484-pin FBGA - same |
| Device Type | Cyclone III FPGA | Cyclone III FPGA | Cyclone III FPGA | Cyclone III FPGA |
| Logic Cells | 39,600 cells | 39,600 cells | 39,600 cells | 39,600 cells |
| Logic Array Blocks | 2,475 LABs | 2,475 LABs | 2,475 LABs | 2,475 LABs |
جیاکەرەوە سەرەکییەکان
- Specific ordering configuration (بەراورد بەEP3C40F484C6N)
- Full commercial temperature listing (بەراورد بەEP3C40F484C7N)
- High-density programmable fabric with extensive connectivity (بەراورد بەEP3C40F484C8N)
تێبینییەکانی دیزاین
Treat the 484-pin FBGA land pattern, ball map, power planes, and via arrangement as a controlled design artifact. Match the manufacturer package drawing and pin-description tables exactly, then verify escape routing against the selected PCB stackup. Avoid changing ball assignments or substituting a mechanically similar package without confirming pad geometry, solder-mask definition, thermal requirements, and assembly-process limits.
Use the manufacturer's recommended power-supply topology, decoupling values, and placement rules for the 1.15 V to 1.25 V core supply and associated I/O rails. Place bypass capacitors close to their designated supply balls and provide low-impedance distribution across the array rather than relying on a single narrow connection. Validate voltage droop during configuration and high I/O activity with the actual power source, copper geometry, and switching pattern.
The 484-pin FBGA can distribute substantial heat through its ball array, but junction temperature still depends on logic utilization, switching activity, ambient temperature, board copper, airflow, and adjacent components. Spread thermal and ground planes beneath the device, minimize thermal coupling to heat-sensitive parts, and evaluate the placed-and-routed design with a worst-case activity scenario. Apply the manufacturer's thermal metrics to the final PCB rather than relying on a package-only estimate.
High-speed I/O and external memory interfaces require controlled impedance, continuous return paths, and verification of skew, crosstalk, and simultaneous-switching noise. Use the exact speed-grade timing constraints during implementation, and model the complete board path instead of relying on device timing alone. Confirm configuration pins, clock inputs, and dedicated pins against the manufacturer ball map before assigning any user functions.
Do not assume that every EP3C40 suffix is interchangeable. The C6, C6N, C7N, and C8N ordering codes must be checked against the manufacturer ordering table for speed, temperature, package, and compliance attributes. Also confirm configuration memory requirements, active-level signals, and unused-pin behavior. A suffix-level substitution without this review can create timing, thermal, or manufacturing nonconformance even when the FBGA package names appear identical.
زانیاری پابەندبوون
The manufacturer-related records identify EP3C40F484C6 as lead-free and moisture-sensitive. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status were not established from the available device records.