EP4CE15F17C8N - 47-Block Cyclone IV E FPGA | Altera
MPN: EP4CE15F17C8N ✓ چالاکEP4CE15F17C8N گشتی
A field-programmable gate array, or FPGA, is a programmable semiconductor in which digital logic functions are configured after manufacture. FPGAs sit above simple programmable logic devices and microcontrollers in design flexibility: they combine configurable logic, embedded memory, programmable I/O, and dedicated resources into one device. This makes an FPGA useful when parallel processing, high I/O density, deterministic control, or product-specific hardware behavior is required.
The EP4CE15F17C8N provides 47 logic blocks and 165 I/O in a compact 256-LBGA package. Its 516096 bits of embedded memory can support data buffering, lookup tables, packet processing, and control functions. The F17 designation identifies the device configuration, while the C8 suffix identifies the ordering variant and speed grade. The 1.2 V supply specification identifies the core operating voltage used for power-supply and signal-integrity design.
Typical uses include industrial control, printer and imaging controllers, embedded vision, communications equipment, test systems, and general-purpose programmable logic. Because the device exposes 165 I/O in a 256-ball package, it is particularly useful for designs requiring numerous board connections and moderate parallel-processing capacity without moving to a larger FPGA architecture.
PCB design must account for the 256-LBGA footprint, power rails, decoupling, clock distribution, and high-speed routing. The manufacturer’s Cyclone IV device documentation should be used for the authoritative ball map, power-up requirements, configuration pins, and supported design tools. Do not infer individual ball assignments from distributor pinout diagrams alone.
This product page combines the manufacturer orderable-part data, package information, commercial guidance, replacement analysis, and practical design considerations in one engineering-focused reference. It distinguishes a confirmed same-family speed-grade alternative from unsupported cross-brand replacements and directs buyers to XAIPART’s Request a Quote form for current commercial terms.
جێگرەوەکانی جێگۆڕکێ بۆ EP4CE15F17C8N — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EP4CE15F17C8N (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Device Type, Embedded Memory, Logic Elements, Speed Grade.
EP4CE15F17C7N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP4CE15F17C8N زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | FPGA |
| Product Family | Cyclone IV E |
| Logic Cells / Logic Blocks | 47 |
| I/O Count | 165 |
| Embedded Memory | 516096 bits |
| ڤۆڵتیەی دابینکردن | 1.2 V |
| Package Type | 256-LBGA |
| ژمارەی پین | 256 pins |
| جۆری دامەزراندن | Surface Mount |
| Ordering Part Number | EP4CE15F17C8N |
| Device Configuration | EP4CE15 (F17) |
| Datasheet File Size | 710 Kbytes |
| Datasheet Length | 42 pages |
ڕێنمایی ڕێکخستنی پینی EP4CE15F17C8N 256-lbga
ڕێکخستنی پین بۆ EP4CE15F17C8N (پاکێجی 256-lbga). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EP4CE15F17C8N.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EP4CE15F17C8N گونجاوە بۆ 6 بەکارھێنانs: Industrial Machine Control, Printer and Imaging Controller, Embedded Vision Preprocessor, Communications Interface Controller, Data Acquisition and Test System, Custom Programmable Interface Hub.
Industrial Machine Control
The EP4CE15F17C8N fits machine-control logic that must coordinate sensors, actuators, interlocks, and communications with deterministic hardware behavior. Its 47 logic blocks and 165 I/O provide useful parallelism for state machines, timing logic, protocol handling, and independent interface channels. The 1.2 V core supply and 256-LBGA package also support compact control boards where routing density matters. Designers should use the manufacturer’s Cyclone IV power, clock, and pin guidance, then validate every external signal against the electrical characteristics of the selected bank.
پێشنیارکراو
Printer and Imaging Controller
The EP4CE15F17C8N is appropriate for printer, scanner, and imaging controllers that coordinate data transfer, motion sequencing, engine control, and sensor interfaces. Forty-seven logic blocks can support parallel datapaths, while 516096 bits of embedded memory are useful for buffering and lookups. Its 165 I/O can reduce external interface concentration on a densely connected controller PCB. The device should be configured around the required data rates and clock domains, with signal-integrity and power-integrity checks completed before high-volume production.
پێشنیارکراو
Embedded Vision Preprocessor
The EP4CE15F17C8N can serve as a preprocessing FPGA when a vision system needs programmable timing, parallel data movement, and multiple sensor-facing interfaces. The 47 logic blocks and 516096 bits of embedded memory suit moderate buffering, thresholding, pixel formatting, and control functions without requiring a very large FPGA. Its 165 I/O provides ample board-level connectivity for cameras, capture devices, and control signals. The implementation must account for video-clock timing, input-signal standards, memory bandwidth, and the timing grade used during design closure.
پێشنیارکراو
Communications Interface Controller
For communications equipment, the EP4CE15F17C8N can implement protocol conversion, framing, packet filtering, test-pattern generation, and host-interface logic in a single programmable device. The combination of 47 logic blocks, 516096 bits of embedded memory, and 165 I/O supports moderate throughput designs with numerous external connections. A synchronous design must include carefully defined clock domains and controlled I/O timing. Use the manufacturer’s pin and timing documentation to establish which banks support the required interfaces and to verify setup-and-hold margins.
پێشنیارکراو
Data Acquisition and Test System
The EP4CE15F17C8N is suitable for modular data-acquisition and test systems that coordinate triggers, counters, capture logic, and instrument-control interfaces. Its moderate logic capacity is well matched to deterministic acquisition control rather than unrestricted high-end processing. The 165 I/O allows multiple measurement or stimulus channels to be consolidated, while embedded memory can support temporary data storage. Designers should define acquisition timing in the Quartus design, constrain all relevant clocks and I/O standards, and verify post-layout timing for the selected device speed grade.
پێشنیارکراو
Custom Programmable Interface Hub
The EP4CE15F17C8N can act as a programmable interface hub between processors, memory devices, external controllers, and mixed board-level signals. Forty-seven logic blocks are sufficient for many bridge, arbitration, and protocol-conversion designs, while 165 I/O helps consolidate otherwise separate glue-logic devices. The 256-LBGA package requires careful escape routing, layer planning, and power distribution to preserve signal integrity. Confirm pin assignments, configuration method, supported interface standards, and timing closure in the manufacturer’s device documentation before releasing the PCB.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EP4CE15F17C8N — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EP4CE15F17C7N |
|---|---|---|
| Brand | Altera | Altera |
| Package | 256-LBGA | 256-LBGA |
| Device Type | FPGA | FPGA |
| Product Family | Cyclone IV E | Cyclone IV E |
| Device Configuration | EP4CE15 (F17) | EP4CE15 (F17) |
| Speed-Grade Suffix | C8 | C7 |
جیاکەرەوە سەرەکییەکان
- Target C8 speed-grade designation (بەراورد بەEP4CE15F17C7N)
- Single-device logic and I/O consolidation (بەراورد بەEP4CE15F17C7N)
- Embedded storage for control and buffering (بەراورد بەEP4CE15F17C7N)
تێبینییەکانی دیزاین
Treat the 256-LBGA footprint as a high-density routing problem. Follow the manufacturer’s recommended land pattern and ball-reference convention, escape power and configuration pins first, and maintain uninterrupted return paths beneath the device. Place decoupling capacitance close to the relevant supply balls and account for via current sharing and layer transitions. PCB stack-up, via geometry, and the exact land pattern should be checked against the controlled package drawing before fabrication.
The 1.2 V core specification does not by itself describe the complete power architecture. Identify every required supply rail, its permitted sequencing behavior, decoupling requirements, and current demand from the Cyclone IV device documentation. Confirm regulator tolerance, transient response, and startup behavior across the full operating range. Avoid powering all banks in an uncontrolled sequence if the selected configuration depends on a specific rail order.
Constrain external clocks, interfaces, and board-to-board signals with realistic budgets for the selected speed grade. Use the manufacturer’s pin table to verify I/O-standard support, differential-pair rules, and bank voltage requirements. For a C7N migration, rerun static timing and check the critical paths against the new timing limit rather than assuming the C8 margin remains valid.
Avoid assigning the 256-LBGA balls from a generic pinout image alone. Verify every connection against the current Altera Cyclone IV documentation, including power, ground, configuration, clock, and no-connect balls. Also verify that the PCB library uses the exact package dimensions and ball map associated with EP4CE15F17C8N. A footprint mismatch can create assembly failure or unreliable operation even when the logical design compiles successfully.
زانیاری پابەندبوون
The manufacturer orderable-part record does not state the requested compliance fields in the available product information.