EP4CE22F17C6N - 22,320 Logic Cells FPGA | Altera
MPN: EP4CE22F17C6N ✓ چالاکEP4CE22F17C6N گشتی
A field-programmable gate array is a digital semiconductor whose logic, signal processing, and interface functions are configured after manufacture. The FPGA category belongs to the broader programmable-logic and semiconductor hierarchy: an FPGA contains configurable logic elements, programmable interconnect, memory resources, and dedicated arithmetic blocks. Because these resources are selected by a programmable configuration, one physical device can support multiple product functions and can be revised without changing the PCB when the logic or interface requirements evolve.
The EP4CE22F17C6N provides 22,320 logic elements, equivalent to 22,320 logic blocks in the device listing, together with 153 I/Os and 608,256 embedded-memory bits. Its maximum frequency is listed at 472.5 MHz, while its core voltage is identified as 1.2 V and its detailed comparison ranges from 1.15 V to 1.25 V. These figures make the device suitable for control logic, protocol bridging, data acquisition, embedded signal processing, and general-purpose industrial automation requiring moderate parallelism.
The C6 designation identifies the device speed position, and the F17 package designation identifies its 256-pin FBGA implementation. A surface-mount tray package supports automated pick-and-place and high-density assembly, but its 256-ball land pattern requires careful PCB routing, via planning, and decoupling. The large package also exposes 153 user I/Os for external memory, communications, control signals, and high-speed interfaces, depending on the selected board-level standards and bank voltage requirements.
Typical applications include programmable logic controllers, industrial automation controllers, motor-control and sequencing systems, communications gateways, test-and-measurement equipment, embedded vision interfaces, and low-cost signal-processing platforms. In each case, the parallel logic resources can implement multiple finite-state machines, protocol engines, arithmetic pipelines, or interface controllers concurrently instead of relying on a microcontroller to service every function sequentially.
The principal design consideration is package and signal integrity. Place bypass capacitors close to the appropriate power and ground balls, maintain continuous ground-plane coverage, and route high-speed signals with controlled impedance. Engineers must also verify the exact I/O standard, bank voltage, configuration method, pin constraints, and timing requirements against the manufacturer’s pinout and Cyclone IV device documentation before releasing the PCB layout.
This product page consolidates the exact device identity, package details, speed designation, searchable technical attributes, qualified same-package alternatives, and practical FPGA implementation guidance into one engineering reference. It also organizes the information needed to compare the C6 device with other EP4CE22 speed grades while keeping replacement decisions tied to package, pin, voltage, timing, and lifecycle requirements.
جێگرەوەکانی جێگۆڕکێ بۆ EP4CE22F17C6N — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EP4CE22F17C6N (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Logic Elements, Device Type, Embedded Memory, Core Supply Voltage.
EP4CE22F17C8N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP4CE22F17C7N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP4CE22E22C8N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP4CE22F17C8
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
EP4CE22F17C7
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
EP4CE22F17C6N زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone IV E |
| Logic Cells / Logic Blocks | 22,320 |
| Logic Blocks | 47 |
| User I/Os | 153 |
| Embedded Memory | 608,256 bits |
| Maximum Operating Frequency | 472.5 MHz |
| Nominal Core Supply Voltage | 1.2 V |
| Core Voltage Range | 1.15 V to 1.25 V |
| Package Type | 256-pin FBGA |
| Package Designation | F17 |
| Number of Package Pins | 256 |
| جۆری دامەزراندن | Surface Mount |
| Shipping Package | Tray |
| Speed Grade | C6 |
| Product Family | Cyclone IV E |
ڕێنمایی ڕێکخستنی پینی EP4CE22F17C6N tray
ڕێکخستنی پین بۆ EP4CE22F17C6N (پاکێجی tray). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EP4CE22F17C6N.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EP4CE22F17C6N گونجاوە بۆ 6 بەکارھێنانs: Industrial PLC and Automation Controller, Communications Gateway and Protocol Bridge, Data Acquisition and Test Instrumentation, Motor Control and Sequencing, Embedded Signal Processing, Programmable Logic and Interface Consolidation.
Industrial PLC and Automation Controller
The EP4CE22F17C6N fits programmable logic controller and factory-automation designs that require several control tasks to operate in parallel. Its 22,320 logic elements can implement sequencing engines, machine-state controllers, interlocks, counters, and communication protocols, while 153 I/Os provide interfaces to sensors, actuators, operator panels, and field buses. The 472.5 MHz maximum frequency supports demanding control paths, and the 1.2 V core supply suits modern FPGA power architectures. Engineers should assign voltage standards per I/O bank and reserve adequate routing capacity for high-speed industrial interfaces.
پێشنیارکراو
Communications Gateway and Protocol Bridge
The EP4CE22F17C6N can consolidate multiple communication tasks in a gateway by running framing logic, protocol conversion, FIFO buffering, and routing concurrently. The 22,320 logic elements provide substantial parallel capacity, while 608,256 embedded-memory bits support packet buffering and interface state. Its 153 user I/Os allow connection to multiple serial, parallel, or differential interfaces when their supported I/O standards and voltage banks are configured correctly. At a maximum frequency of 472.5 MHz, the device is appropriate for moderate-rate protocol engines and real-time traffic management.
پێشنیارکراو
Data Acquisition and Test Instrumentation
The EP4CE22F17C6N is suitable for data-acquisition front ends and test equipment that must coordinate sampling control, digital filtering, counters, timing, and data transfer. Parallel programmable logic can implement acquisition state machines and channel sequencing without relying on a single sequential processor, while embedded memory provides local buffering for intermediate results. The 153 I/Os support digital sensors, triggers, clocks, and instrument interfaces, and the 472.5 MHz maximum frequency supports higher-rate digital signal-processing pipelines. Exact timing and I/O standards must be verified against the selected board architecture.
پێشنیارکراو
Motor Control and Sequencing
The EP4CE22F17C6N supports deterministic motor-control, position tracking, and sequencing systems by combining configurable logic pipelines with numerous external connections. Up to 153 I/Os can be allocated to encoder inputs, position sensors, control outputs, communication links, and status signals, subject to the device’s bank and voltage constraints. The programmable architecture allows control laws, fault handling, and motion sequencing to execute concurrently. Its 1.2 V core operation and 472.5 MHz maximum frequency support compact, high-performance control electronics where PCB area and logic flexibility are important.
پێشنیارکراو
Embedded Signal Processing
The EP4CE22F17C6N can implement parallel filters, correlators, counters, data classifiers, and fixed-point arithmetic pipelines in a single Cyclone IV E device. Its 22,320 logic elements allow multiple processing lanes to operate concurrently, while 608,256 embedded-memory bits provide storage for samples, coefficients, and intermediate stages. The listed 472.5 MHz maximum frequency provides a clear timing target for pipeline architecture, while 153 I/Os accommodate sample buses, control signals, and data exchange. Designers should select the correct speed grade and complete static timing analysis for the actual clocking and I/O arrangement.
پێشنیارکراو
Programmable Logic and Interface Consolidation
The EP4CE22F17C6N is useful for consolidating glue logic, interface adapters, control logic, and protocol engines into one programmable device. Manufacturers can revise the configuration or add functions without changing the board, while the 22,320 logic elements offer considerably more parallelism than a small programmable logic device. Its 153 I/Os provide broad connectivity for legacy and modern peripherals, and the 256-pin FBGA package supports dense routing when careful ball assignment and layer planning are used. This makes the FPGA useful for cost-sensitive equipment requiring product revisions and hardware reuse.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EP4CE22F17C6N — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EP4CE22F17C8N | EP4CE22F17C7N | EP4CE22E22C8N | EP4CE22F17C8 | EP4CE22F17C7 |
|---|---|---|---|---|---|---|
| Package | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Device Family | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Speed Grade | C6 | C8 | C7 | C8 | C8 | C7 |
| Device Position | F17 | F17 | F17 | E22 | F17 | F17 |
| Package Pin Count | 256 | 256 | 256 | 256 | 256 | 256 |
جیاکەرەوە سەرەکییەکان
- Exact C6 speed position within the EP4CE22F17 package family (بەراورد بەEP4CE22F17C8N)
- F17 device position with 22,320 logic elements (بەراورد بەEP4CE22E22C8N)
- 472.5 MHz listed maximum operating frequency (بەراورد بەEP4CE22F17C7N)
تێبینییەکانی دیزاین
Treat the 256-pin FBGA as a high-density routing problem. Assign the 153 user I/Os against the manufacturer ball map, preserve power and ground ball adjacency, and use short connections between each device and its decoupling network. Avoid routing high-speed signals through layers divided by an uninterrupted ground plane. Complete escape-routing, via-count, and layer-transition reviews before schematic-to-layout release.
Design the 1.2 V core rail for the EP4CE22F17C6N across the listed 1.15 V to 1.25 V operating range. Place local high-frequency and bulk decoupling at the device power balls, verify the regulator’s control-loop behavior with the intended load transient, and account for startup current when sequencing the FPGA core and configuration circuitry. Review every I/O bank independently because its voltage and current requirements can differ from the core supply.
Use the F17 package documentation and the Cyclone IV device pin constraints to define board-layer transitions and external interface topology. Keep clock, configuration, and high-speed I/O paths away from noisy switching-regulator and high-current return paths. For externally clocked interfaces, evaluate input jitter, skew, termination, and I/O timing rather than relying only on the device’s 472.5 MHz maximum operating frequency.
Do not infer drop-in equivalence from the EP4CE22 family name alone. The C6, C7, and C8 speed positions affect timing, while the F17 and E22 device positions can affect resource or electrical characteristics. For every proposed replacement, compare the exact ball map, I/O standards, core and bank voltages, configuration interface, memory interfaces, timing constraints, and package drawings before changing the BOM.
زانیاری پابەندبوون
The available ordering and comparison listings do not provide complete compliance details for this exact ordering part number.