IRS20124STRPBF - 200V 1.2A Audio Driver | Infineon
MPN: IRS20124STRPBF ✓ چالاکIRS20124STRPBF گشتی
A digital audio driver is a specialized gate-driver IC that translates control signals into high-current outputs capable of charging and discharging the external power MOSFET gates used in a Class D amplifier. This product type belongs to the MOSFET-driver hierarchy within power management ICs and helps reduce gate-drive complexity in high-power audio output stages. Its integrated protection and timing functions can also reduce the number of discrete components required around the power stage.
The verified manufacturer data identifies 200 V high-voltage ratings, up to 1.2 A output current, two high-side and low-side outputs, and support for Class D audio amplifier applications rated as high as 1000 W. Programmable compensated preset deadtime is intended to improve total harmonic distortion performance, while the logic inputs remain compatible with standard CMOS operation down to 3.0 V.
The IRS20124 integrates deadtime generation and bidirectional over-current sensing to simplify Class D power-stage design. Its separate high-side and low-side outputs are described as configurable for inverted or non-inverted drive arrangements. This combination makes the device useful where the external power transistors require controlled transition timing and where system-level fault detection is needed close to the gate-driver stage.
Typical uses include high-power Class D audio amplifiers, professional loudspeaker systems, home-theater power stages, automotive audio systems, and industrial audio equipment. In these systems, the IRS20124 can drive external N-channel power MOSFETs while providing a repeatable deadtime interval and a fault-detection path. The 14-lead SOIC package is also suitable for conventional surface-mount PCB assembly.
Designers must verify the external MOSFET gate charge, peak gate current, supply requirements, deadtime setting, and externally programmed protection thresholds against the latest manufacturer data sheet. Because gate-drive losses and switching behavior are strongly influenced by the selected MOSFETs and PCB layout, thermal performance should be evaluated in the complete Class D output stage rather than from the driver package alone.
This page consolidates the verified 200 V, 1.2 A, Class D, deadtime, over-current, and 14-SOIC characteristics into an engineer-focused selection guide. It also documents distributor availability, datasheet access, design trade-offs, and the verified same-package alternative while clearly identifying price, pin mapping, and compliance details that remain unverified.
جێگرەوەکانی جێگۆڕکێ بۆ IRS20124STRPBF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ IRS20124STRPBF (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Over-Current Protection, Package.
IRS20124SPBF
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →IRS20124STRPBF زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| High-Voltage Rating | 200 V |
| Output Current | 1.2 A |
| Supported Class D Output Power | Up to 1000 W |
| ڕێکخستنی دەرچوون | 2 outputs: high-side and low-side |
| Output Drive Modes | Inverted and non-inverted |
| Deadtime Function | Programmable compensated preset deadtime |
| Over-Current Protection | Bidirectional over-current sensing |
| Minimum Compatible Logic Supply | 3.0 V |
| Logic Compatibility | LSTTL output or standard CMOS |
| پاکێج | 14-lead SOIC, 3.90 mm body width |
| جۆری دامەزراندن | Surface mount |
| Shipping Format | Tape and reel |
| Data Sheet Document Number | PD60240 |
| Data Sheet Length | 27 pages |
| Data Sheet Publication Date | 2006-06-14 |
| Product Classification | Digital audio driver |
ڕێنمایی ڕێکخستنی پینی IRS20124STRPBF 14-lead soic, 3.90 mm body width
ڕێکخستنی پین بۆ IRS20124STRPBF (پاکێجی 14-lead soic, 3.90 mm body width). ئەم ئامێرە وزەییە تەرمیناڵی گەیت، درەین و سەرچاوەی ھەیە. بۆ پاکێجە ناڕێکخراوەکان، سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ئاراستەی وردی پینی 1 و زانیاری شوێنپێ. بەکارھێنانە باوەکان بریتین لە دیزاینی دابینکردنی وزە، بەکارخستنی مۆتۆر و گۆڕینی بار.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ IRS20124STRPBF.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
IRS20124STRPBF گونجاوە بۆ 6 بەکارھێنانs: High-Power Class D Audio Amplifier, Professional Loudspeaker Power Stage, Home-Theater Multi-Channel Amplifier, Automotive Audio Amplifier, Industrial Audio and Public-Access Amplifier, Powered Speaker and Subwoofer Amplifier.
High-Power Class D Audio Amplifier
The IRS20124STRPBF fits the external gate-drive stage of a high-power Class D audio amplifier because its verified 200 V rating supports the stated application class of up to 1000 W, while its 1.2 A output rating provides the drive current referenced for the device. In the power stage, the two outputs control the high-side and low-side switching devices, and integrated deadtime generation reduces the risk of simultaneous conduction. Programmable compensated preset deadtime is also intended to improve total harmonic distortion. The practical trade-off is that MOSFET selection, gate-loop layout, and thermal performance remain system-level constraints because the driver does not eliminate switching losses or determine the power stage's output power by itself.
پێشنیارکراو
Professional Loudspeaker Power Stage
The IRS20124STRPBF can support a professional loudspeaker amplifier output stage requiring controlled high-side and low-side MOSFET switching. Its verified 200 V rating and 1.2 A output capability align with high-power Class D designs, while bidirectional over-current sensing can assist fault detection near the power devices. Integrated programmable deadtime is valuable in systems where crossover distortion or shoot-through margin is critical. For sustained high-output operation, however, the external MOSFET dissipation, bus voltage, heatsinking, and thermal protection must be analyzed separately; the driver package itself does not carry the amplifier's output power loss.
پێشنیارکراو
Home-Theater Multi-Channel Amplifier
The IRS20124STRPBF is applicable to each high-power Class D channel of a home-theater amplifier when discrete external MOSFETs are used. The device's 1.2 A output rating, 200 V high-voltage capability, integrated deadtime, and over-current sensing support a robust discrete gate-drive topology. Its separate high-side and low-side outputs can accommodate the inversion requirements of the selected power-stage configuration. A channel-level design must still account for channel-to-channel timing, negative-rail generation if required, EMI from high-current switching, and heat spreading beneath the power MOSFETs rather than the small SOIC driver footprint.
پێشنیارکراو
Automotive Audio Amplifier
The IRS20124STRPBF may be evaluated for automotive audio power stages because the verified 200 V rating and integrated deadtime and current-sensing functions address important gate-drive requirements in a Class D topology. Its 14-lead SOIC package is straightforward to assemble with conventional surface-mount methods. Automotive use nevertheless requires separate confirmation of AEC-Q100 qualification, temperature grade, load-dump behavior, transient immunity, and automotive supplier documentation because those facts are not present in the supplied excerpts. It should not be treated as automotive-qualified solely from its voltage rating or distributor availability.
پێشنیارکراو
Industrial Audio and Public-Access Amplifier
The IRS20124STRPBF is suitable for an industrial Class D amplifier used in paging, intercom, or public-address equipment when the output stage uses discrete power MOSFETs. The verified 1.2 A driver rating serves high-current gate transitions, while integrated deadtime generation and bidirectional over-current sensing reduce external control complexity. In continuous-duty public-address equipment, designers should calculate MOSFET conduction and switching loss, verify protection behavior under sustained fault conditions, and provide adequate copper and thermal management. The driver should be positioned to minimize gate-loop inductance, since poor layout can degrade switching behavior despite the IC's integrated timing functions.
پێشنیارکراو
Powered Speaker and Subwoofer Amplifier
The IRS20124STRPBF can drive the external MOSFET bank in a compact powered-speaker or subwoofer Class D output stage. Its 200 V high-voltage rating suits higher bus voltages, and integrated deadtime is intended to improve switching overlap control and total harmonic distortion. Bidirectional current sensing provides a foundation for detecting abnormal output-stage conditions. Design trade-offs include the space required by the external power transistors, heat dissipation away from the driver, and the need for careful separation between sensitive audio inputs and high-current switching paths. A temperature-qualified package and verified automotive grade are not established by the supplied data.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ IRS20124STRPBF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | IRS20124SPBF |
|---|---|---|
| Package | 14-lead SOIC | 14-lead SOIC - same package |
| Brand | Infineon Technologies | Infineon Technologies |
| Product Type | Digital audio driver | Digital audio driver |
| Deadtime Function | Programmable compensated preset deadtime | Programmable compensated preset deadtime |
| Over-Current Protection | Bidirectional over-current sensing | Bidirectional over-current sensing |
| Shipping Format | Tape and reel | SPBF ordering variant; exact shipping format not stated in supplied data |
جیاکەرەوە سەرەکییەکان
- Integrated Class D gate-drive functions (بەراورد بەIRS20124SPBF)
- Verified high-voltage output-stage capability (بەراورد بەIRS20124SPBF)
- Distributor-manufactured order-code support (بەراورد بەIRS20124SPBF)
تێبینییەکانی دیزاین
Place the driver close to the external power MOSFET gates and minimize the gate-drive loop area. Keep high-current output paths compact and separate sensitive audio-input traces from switching nodes. The manufacturer data sheet states that switching times are designed for immunity from VCC perturbation and incoming noise on the DT pin, but layout immunity still depends on short DT routing, a stable reference return, and careful placement of bypass capacitance.
Do not infer deadtime, over-current thresholds, or logic levels from the distributor summary alone. Confirm the absolute maximum ratings, supply range, DT programming method, fault outputs, and pin mapping in data sheet PD60240. Also verify that the selected MOSFETs can be switched by the 1.2 A driver rating within the required switching time and operating temperature; excessive gate charge can lead to slow transitions and increased distortion.
Estimated: the 14-lead SOIC driver dissipation is normally much smaller than the dissipation in the external Class D power MOSFETs, but no verified thermal-resistance data is available in the supplied excerpts. Review the driver junction-temperature calculation with the actual gate-drive waveform, external MOSFET gate charge, switching frequency, and PCB copper area. If the calculated loss or ambient temperature leaves insufficient margin, improve copper spreading or use a higher-rated driver rather than assuming the SOIC package is adequate.
High-current Class D switching can couple EMI into the audio path even when deadtime is correctly controlled. Use a compact power loop, minimize switch-node area, maintain a quiet ground reference for the driver and audio input stages, and apply the manufacturer's bypass recommendations. Validate emissions and distortion on the assembled PCB because changes to MOSFET layout, bus wiring, and grounding can materially affect measured performance.
زانیاری پابەندبوون
The supplied excerpts do not provide explicit compliance declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict minerals. The SPBF suffix is not used as proof of any specific compliance claim because the supplied data does not expressly define it.