ISO1042DW - 5Mbps Isolated CAN Transceiver | Texas Instruments
MPN: ISO1042DW ✓ چالاکISO1042DW گشتی
An isolated CAN transceiver is a physical-layer interface device that couples a controller-area-network bus to digital logic while maintaining galvanic isolation between the two sides. In the hierarchy of electronic components, it belongs to the CAN transceiver class, then to wired network interfaces, communications ICs, and ultimately semiconductor devices. Isolation is especially valuable when ground-potential differences, high-energy bus faults, or long external cable runs could otherwise damage a controller or create an unsafe grounding path.
The ISO1042DW combines several protective and performance features in one interface. Its 152 ns loop delay supports dependable communication at high CAN FD rates, while ±70 V DC bus fault protection tolerates severe DC faults on the bus side. The ±30 V common-mode range improves tolerance to voltage differences between the transceiver and other nodes. The device supports a 1.8 V to 5.5 V supply range and is offered in a 16-pin wide-body SOIC package for surface-mount assembly.
Technically, the ISO1042 is divided into logic-side and bus-side functional regions by its reinforced isolation barrier. CAN TX and RX signals pass through this barrier to the bus interface, while bus fault energy is contained on the isolated side. The manufacturer datasheet states that the device meets ISO 11898-2:2016, provides a maximum data rate of 5 Mbps, and includes DC bus-fault and ESD protection features. Exact isolation lifetime, surge withstand, and detailed pulse ratings are not included in the supplied search data and should be confirmed in the full manufacturer datasheet before qualification.
Typical applications include factory automation, industrial robot controllers, electric mobility systems, building controls, and isolated CAN-to-CPU communication links. In each case, the device can connect a host controller to a CAN FD bus while preserving galvanic isolation. Engineers should pay particular attention to bus-fault energy, common-mode transients, isolated-side supply requirements, and the grounding strategy when integrating the transceiver into a finished system.
Layout guidance should preserve the isolation barrier by keeping logic-side and bus-side copper, components, and creepage paths appropriately separated. Place required input and output capacitors close to their associated pins, and avoid routing bus-side signals beneath the isolation region. Because the isolated bus side may encounter substantial fault voltage, PCB creepage, clearance, and protection-component selection deserve review under the final system voltage rules.
This product page consolidates the verified manufacturer specifications, distributor pricing, package information, and qualified cross-reference results into an engineering-oriented resource. It also identifies where alternative data is unavailable, allowing designers to distinguish verified drop-in options from isolated-interface products that merely provide similar functionality without sharing the required footprint.
جێگرەوەکانی جێگۆڕکێ بۆ ISO1042DW — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ISO1042DW (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Protocol, Data Rate, Isolation Voltage, Operating Temperature.
ISO1042DW.A
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CA-IS3052W
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ISO1042DW تایبەتمەندییەکان
| Product Type | Galvanically isolated CAN FD transceiver |
| Maximum CAN FD Data Rate | 5 Mbps |
| Classic CAN Data Rate | 1 Mbps |
| CAN Physical-Layer Standard | ISO 11898-2:2016 |
| DC Bus Fault Protection | ±70 V DC |
| Common-Mode Voltage Range | ±30 V |
| Loop Delay | 152 ns |
| Supply Voltage Range | 1.8 V to 5.5 V |
| Isolation Type | Reinforced galvanic isolation |
| پاکێج | 16-pin wide-body SOIC (DW) |
| جۆری دامەزراندن | Surface mount |
| مەودای پلەی گەرمیی کارکردن | -40 °C to +125 °C |
| Transceiver Count | 1 transceiver |
| Logic-Side Supply | 1.8 V to 5.5 V |
ڕێنمایی ڕێکخستنی پینی ISO1042DW 16-pin wide-body soic (dw)
ڕێکخستنی پین بۆ ISO1042DW (پاکێجی 16-pin wide-body soic (dw)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ISO1042DW.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ISO1042DW گونجاوە بۆ 6 بەکارھێنانs: Industrial CAN FD Control, Factory Automation Networks, Electric Vehicle Network Isolation, Building and HVAC Control, Robotics and Motion Control, Medical and Diagnostic Equipment.
Industrial CAN FD Control
The ISO1042DW fits industrial CAN FD control links that need both high data throughput and electrical separation between the bus and controller. It supports operation up to 5 Mbps and classic CAN up to 1 Mbps, while its 152 ns loop delay provides timing margin for high-rate communications. The reinforced isolation barrier protects the host electronics from bus-side ground differences, and the ±70 V DC bus-fault rating adds protection during abnormal bus conditions. A designer can place it between a CAN-capable MCU and a field bus, then treat the logic side as a separate domain. Final qualification should verify transient requirements, isolation lifetime, and PCB creepage against the installation environment.
پێشنیارکراو
Factory Automation Networks
The ISO1042DW is appropriate for factory automation nodes where motor drives, sensors, and controllers may sit at different ground potentials. Supporting 5 Mbps CAN FD allows the same interface to participate in high-rate control traffic, while the ±30 V common-mode range improves tolerance to bus-side voltage excursions. The ±70 V DC bus-fault protection provides an additional layer of robustness against accidental DC connection to a bus rail. Because the transceiver is surface-mounted in a 16-pin wide-body SOIC, it can be placed close to the bus connector and isolation boundary. Engineers should maintain separation between logic-side and bus-side copper and verify transient immunity for the complete machine installation.
پێشنیارکراو
Electric Vehicle Network Isolation
The ISO1042DW can be used in electric-vehicle subnets where a battery or traction system may be electrically noisy or subject to large ground offsets. Its galvanic isolation prevents the vehicle’s high-energy power domain from sharing a conductive ground path with a low-voltage controller. The device supports CAN FD up to 5 Mbps for chassis, powertrain, or body-network data, and its 152 ns loop delay helps preserve timing margin. Its ±70 V DC bus-fault protection is valuable in environments where wiring mistakes are possible. Automotive production use still requires confirmation of the exact ordering code’s AEC-Q100 status, transient ratings, isolation lifetime, and operating-temperature qualification.
پێشنیارکراو
Building and HVAC Control
The ISO1042DW suits building-control, HVAC, and energy-management nodes where long cable runs can introduce ground differences and bus transients. The ±30 V common-mode range supports communication where the bus-side ground is displaced from the controller ground, and reinforced galvanic isolation provides a clear safety barrier between those domains. A 5 Mbps CAN FD rate also allows the link to support modern diagnostic and sensor traffic without moving to a faster bus standard. The device is used between the host MCU and the CAN bus, with separate supplies for the isolated domains. Layout review should confirm creepage, clearance, isolated-side capacitance, and compliance with the building’s applicable installation requirements.
پێشنیارکراو
Robotics and Motion Control
The ISO1042DW is useful between a robot controller and distributed motor, encoder, or actuator CAN nodes where ground offsets and conducted disturbances could impair the controller. Its 5 Mbps CAN FD capability supports fast control and status traffic, while the 152 ns loop delay limits the additional delay introduced at the interface. Reinforced isolation helps keep the control electronics separate from the external wiring network, and the ±70 V DC fault protection provides additional robustness. Designers can locate the transceiver near the connector to shorten unprotected bus traces. The finished design should still evaluate surge immunity, connector grounding, common-mode choke requirements, and the separation between the logic-side and bus-side return paths.
پێشنیارکراو
Medical and Diagnostic Equipment
The ISO1042DW can isolate a CAN-connected diagnostic subsystem from the surrounding equipment while preserving high-speed CAN FD communication. Its 5 Mbps rate and 1 Mbps classic-CAN support provide design flexibility, and the 152 ns loop delay supports low-latency command and status exchange. Reinforced galvanic isolation is especially relevant when connected equipment or cables may present different ground potentials. The ±70 V DC bus-fault rating and ±30 V common-mode range add tolerance to abnormal bus conditions. Because the supplied data does not identify medical-device certification for this ordering code, compliance must be assessed at the finished-system level. Layout should preserve the isolation barrier and use an approved isolated-side supply arrangement.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ISO1042DW — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ISO1042DW.A | CA-IS3052W |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Chipanalog |
| Package | 16-pin wide-body SOIC (DW) | 16-pin wide-body SOIC (DW) - same | 16-pin wide-body SOIC (DW) - same |
| Product Type | Galvanically isolated CAN FD transceiver | Galvanically isolated CAN transceiver | Isolated CAN transceiver |
| Maximum CAN FD Data Rate | 5 Mbps | 5 Mbps | 5 Mbps |
جیاکەرەوە سەرەکییەکان
- High-speed isolated CAN FD interface (بەراورد بەISO1042DW.A)
- Documented severe DC bus-fault tolerance (بەراورد بەCA-IS3052W)
- Direct TI source and evaluation ecosystem (بەراورد بەCA-IS3052W)
تێبینییەکانی دیزاین
Preserve the isolation barrier throughout the PCB layout. Keep logic-side and bus-side copper, components, and ground planes separated according to the manufacturer’s isolation-layout guidance, and do not route bus-side signals beneath the logic-side circuitry. Place required capacitors near their associated pins and place the transceiver close to the CAN connector to minimize the length of unprotected bus traces.
Do not treat ±70 V DC bus-fault protection as permission to exceed the device’s transient, surge, or common-mode limits. Verify the complete fault waveform, duration, and source impedance in the system, and ensure that external protection does not prevent the transceiver from entering its intended recovery state. The ±30 V common-mode range and ±70 V DC fault rating describe different operating conditions.
Supply the logic and isolated bus domains separately as required by the ISO1042 isolation architecture. Confirm the allowed supply range of 1.8 V to 5.5 V for each domain from the manufacturer datasheet, and verify that isolated-side supply capacitance and startup sequencing satisfy the device requirements. Avoid sharing return paths that would defeat the intended galvanic separation.
For 5 Mbps CAN FD, minimize discontinuities and unnecessary stub length on the bus side. Use a controlled-impedance board stack-up, maintain consistent spacing between CANH and CANL, and consider the bus termination strategy prescribed by the CAN network design. Validate eye quality, reflections, common-mode behavior, and propagation delay using the final cable and connector configuration.
زانیاری پابەندبوون
The supplied verified excerpts identify ISO 11898-2:2016 compliance and a related ISO1042BQDWVRQ1 automotive variant, but they do not explicitly state the compliance status of the ISO1042DW ordering code. A related 8-pin automotive variant does not establish qualification for the 16-pin DW device.