Microchip Technology

KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

MPN: KSZ8041TL-S ✓ چالاک
3.135 V to 3.465 V Vdss 48-TQFP, 7 mm x 7 mm Package
MOQ: 1 |

KSZ8041TL-S گشتی

The Microchip Technology KSZ8041TL-S is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver with one transmitter and one receiver, MII, RMII, and SMII host interfaces, and a 48-lead TQFP package measuring 7 mm by 7 mm. Its 3.135 V to 3.465 V operating-supply range supports 3.3 V network equipment designs.

An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital frames exchanged with a network controller into electrical signals suitable for twisted-pair cabling. It belongs to the interface-IC hierarchy: Ethernet PHY, network interface, interface IC, and semiconductor. The KSZ8041 family supports both 10BASE-T and 100BASE-TX copper links and provides configurable host-facing interfaces for integration with Ethernet MAC controllers.

The KSZ8041TL-S uses a mixed-signal design intended to extend Ethernet signaling distance while reducing power consumption. Its one-driver, one-receiver arrangement supports bidirectional copper communication through an external magnetics-based network interface. The part provides MII, RMII, and SMII connectivity, allowing system designers to select an interface appropriate to MAC timing and board constraints rather than introducing a separate PHY for each parallel-interface mode.

The principal operating constraints center on the single 3.3 V supply, supported Ethernet data rates, copper media support, package footprint, and configuration straps. The device supports 10BASE-T and 100BASE-TX operation but does not include the 100BASE-FX capability described for the KSZ8041FTL family member. The target therefore fits copper Ethernet designs requiring MII, RMII, or SMII connectivity rather than fiber-media converter designs.

Typical uses include industrial Ethernet controllers, embedded network equipment, print servers, network interface adapters, and communication equipment that connects a host MAC to a 10/100 copper Ethernet network. Its SMII interface can also suit designs requiring a wider parallel data bus, while RMII reduces the number of host-side signals when board area is more constrained than throughput demands.

When designing a board around the KSZ8041TL-S, follow the manufacturer hardware design checklist for power sequencing, reset behavior, PHY strapping, magnetic-component selection, and magnetics-side layout. Ensure the host interface voltage levels match the selected MII, RMII, or SMII mode, and avoid driving strap pins with external circuitry that could interfere with startup sampling.

This page consolidates the KSZ8041TL-S electrical identity, package details, host-interface options, sourcing guidance, drop-in candidates, and practical PCB considerations into one engineering reference. It also distinguishes the target from copper-only, industrial-temperature, and fiber-capable members of the KSZ8041 family.

جێگرەوەکانی جێگۆڕکێ بۆ KSZ8041TL-S — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ KSZ8041TL-S (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Device Type, Supply Architecture, Product Type.

Microchip Technology
Package: 48-pin TQFP
Supply Architecture: Single supply
Product Type: 10/100 Ethernet physical-layer transceiver
بەراوردکردن لەگەڵ KSZ8041TL-S →
Microchip Technology
Package: 48-TQFP (7 x 7 mm)
Device Type: Ethernet interface IC / physical-layer transceiver
Supply Architecture: Single-supply
بەراوردکردن لەگەڵ KSZ8041TL-S →
Microchip Technology
Package: 48-TQFP (7 x 7 mm)
Device Type: Ethernet interface IC / physical-layer transceiver
Supply Architecture: Single-supply
بەراوردکردن لەگەڵ KSZ8041TL-S →
Microchip Technology
Package: 48-pin TQFP, 7 x 7 mm
Device Type: 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Supply Architecture: Single supply
بەراوردکردن لەگەڵ KSZ8041TL-S →

KSZ8041TL

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 48-TQFP (7x7)
10BASE-T/100BASE-TX Ethernet physical-layer transceiver · 10 Mb/s and 100 Mb/s · MII, RMII, and SMII · Single-supply · 10BASE-T and 100BASE-TX · Yes; intended to extend signaling distance while reducing power consumption · HP Auto MDI/MDIX · INTRP on pin 32; optional PHY-register status-update signal

پەیوەندی بۆ نرخ

بینینی داتاشیت →

KSZ8041TLI-S

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 48-TQFP (7x7)
10BASE-T/100BASE-TX Ethernet physical-layer transceiver · 10 Mb/s and 100 Mb/s · Single supply · MII, RMII, and SMII · Supported · Low-power CMOS mixed-signal process · IEEE 802.3u · 1

پەیوەندی بۆ نرخ

بینینی داتاشیت →

KSZ8041TLI-TR

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 48-TQFP (7x7)
10Base-T/100Base-TX Ethernet physical-layer transceiver · 10 Mbps and 100 Mbps · 1 channel · MII, RMII, and SMII · Single supply · 3.3 V · 3.135 V to 3.465 V · IEEE 802.3 and IEEE 802.3u

✓ بەردەستە

$3.6094 / یەکە

بینینی داتاشیت →

KSZ8041FTLI

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 48-TQFP (7x7)
10/100 Ethernet physical-layer transceiver · 10Base-T and 100Base-TX · MII, RMII, and SMII · Single supply · HP Auto-MDI/MDI-X · 48-pin TQFP · 7 mm x 7 mm · -40 C to +85 C

پەیوەندی بۆ نرخ

بینینی داتاشیت →

KSZ8041TL-S تایبەتمەندییەکان

Device Type 10/100BASE-TX Ethernet physical-layer transceiver
Number of Drivers 1 driver
Number of Receivers 1 receiver
Supply Voltage Range 3.135 V to 3.465 V
Supply Configuration Single supply
Supported Copper Ethernet Rates 10BASE-T and 100BASE-TX
Host Interface MII, RMII, and SMII
پاکێج 48-TQFP, 7 mm x 7 mm
جۆری دامەزراندن Surface mount
Target Packaging Tray
Signaling Design Mixed-signal design
100BASE-FX Support Not supported in KSZ8041TL-S
Maximum Ethernet Data Rate 100 Mbit/s
Minimum Ethernet Data Rate 10 Mbit/s
AEC-Q100 Qualification Not applicable
Media Interface Copper Ethernet through external magnetics
Configuration Mechanism Power-up PHY strapping pins

ڕێنمایی ڕێکخستنی پینی KSZ8041TL-S 48-tqfp, 7 mm x 7 mm

ڕێکخستنی پین بۆ KSZ8041TL-S (پاکێجی 48-tqfp, 7 mm x 7 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 48-tqfp, 7 mm x 7 mm بۆ KSZ8041TL-S

هیچ داتای وردی پینئاوت بەردەست نییە بۆ KSZ8041TL-S.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

KSZ8041TL-S گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Controllers, Embedded Network Equipment, Print Servers, Network Interface Adapters, Communication Equipment, Network Processor Gateways.

🏭

Industrial Ethernet Controllers

The KSZ8041TL-S suits a 3.3 V industrial controller that must connect an Ethernet MAC to a 10BASE-T or 100BASE-TX copper network. Its MII, RMII, and SMII interfaces let the board match the selected MAC to timing, signal-count, and routing constraints. Operating from 3.135 V to 3.465 V, the device integrates one driver and one receiver for a standard copper PHY role. Design the magnetics-side layout according to the manufacturer hardware checklist, particularly for differential routing, surge paths, isolation components, and separation from noisy power stages.

🧩

Embedded Network Equipment

Embedded gateways, controllers, and communication modules can use the KSZ8041TL-S as the copper Ethernet front end for a host processor. The 10BASE-T and 100BASE-TX support covers both legacy and fast-Ethernet links, while RMII provides a compact interface for designs where host-side pin count is constrained. The single 3.3 V supply simplifies system power partitioning around 3.135 V to 3.465 V. Before routing the PCB, verify the selected MII, RMII, or SMII mode and startup strap levels because configuration is sampled during power-up or reset.

🖨️

Print Servers

A print-server board can place the KSZ8041TL-S between an embedded host and an external 10/100BASE-TX Ethernet interface. The PHY supports both 10 Mbit/s and 100 Mbit/s copper operation, allowing the same hardware to accommodate legacy and fast-Ethernet networks. RMII is useful when the host connector and routing area are limited, while MII or SMII may be selected for different MAC timing requirements. Keep the network magnetics and high-energy transient paths away from processor clocks and memory, and apply the manufacturer's layout checklist to the complete copper-channel implementation.

🌐

Network Interface Adapters

The KSZ8041TL-S is appropriate for an add-in or compact network interface adapter that converts a host controller's parallel MII, RMII, or SMII signals into standard copper Ethernet signaling. Its one-driver, one-receiver configuration and 48-TQFP package support a conventional Ethernet-PHY layout. Because the part supports both 10BASE-T and 100BASE-TX, an adapter can negotiate across common Ethernet speeds through the host MAC. Validate link behavior at both supported rates, configure straps before reset release, and follow the official hardware checklist for magnetics and board-level isolation.

📡

Communication Equipment

Communication equipment requiring a 10/100 copper network connection can use the KSZ8041TL-S to bridge a network controller to external magnetics. The mixed-signal design is intended to extend signaling distance while reducing power consumption, which is valuable in distributed equipment. The choice among MII, RMII, and SMII allows the PHY to align with the host interface bandwidth and connector density. For equipment with strict conducted-noise or surge requirements, coordinate component selection, grounding, shielding, and magnetics layout with the complete product compliance plan rather than relying only on the PHY datasheet.

🖥️

Network Processor Gateways

A network processor gateway can pair the KSZ8041TL-S with a host SoC to provide a dedicated 10/100BASE-TX copper port. SMII is useful where a wide host-side bus is available, while RMII reduces pin count in compact gateways. The target operates from a single 3.135 V to 3.465 V supply, allowing the PHY to share a conventional 3.3 V rail while the host processor uses separate lower-voltage domains. Plan decoupling near the supply pins, preserve continuous-reference-plane return paths under differential pairs, and avoid placing noisy switching-regulator loops beside the Ethernet channel.

What are the key specifications of KSZ8041TL-S that engineers should know?
The KSZ8041TL-S is a single-supply 10BASE-T/100BASE-TX Ethernet PHY with one driver, one receiver, and MII, RMII, and SMII host interfaces. According to the Microchip manufacturer datasheet, it operates from 3.135 V to 3.465 V and is packaged in a 48-TQFP measuring 7 mm by 7 mm. The TL-S designation is available in tray packaging. Its principal design distinction is copper-only 10/100 Ethernet support rather than the 100BASE-FX capability associated with the KSZ8041FTL.
Where can I download the KSZ8041TL-S datasheet PDF?
The official KSZ8041TL-S datasheet PDF is available from Microchip Technology at the product-datasheet link listed on this page. The document is titled “KSZ8041TL/FTL/MLL Data Sheet” and covers the KSZ8041TL, KSZ8041FTL, and KSZ8041MLL family. For PCB implementation, also consult the official “KSZ8041TL Hardware Design Checklist,” which addresses power-up, reset, PHY strap latching, and Ethernet magnetics-side design considerations.
Where can I find the KSZ8041TL-S pinout?
The KSZ8041TL-S pinout is shown in the pin-description and package drawings of the Microchip manufacturer datasheet. The device uses a 48-TQFP package with a 7 mm by 7 mm body. Use the manufacturer's 48-pin package drawing to map signal names to PCB pads because the TL-S ordering code shares its electrical family with other KSZ8041 variants. The hardware design checklist also provides implementation guidance for strapping and reset behavior.
What is the difference between KSZ8041TL-S and KSZ8041TLI-S?
Both parts are Microchip Technology members of the KSZ8041 10/100BASE-TX PHY family and are associated with a 48-TQFP package. The available comparison information identifies the KSZ8041TL with a 0 °C to +70 °C temperature range, while the KSZ8041TLI family supports an extended range down to -40 °C and up to +85 °C. Choose KSZ8041TL-S for its specified ordering condition; use the manufacturer datasheet to confirm temperature, interface-mode, and strap differences before substitution.
KSZ8041TL-S vs KSZ8041FTLI - which is better for copper Ethernet?
The KSZ8041TL-S is the better choice for a conventional copper-only 10BASE-T/100BASE-TX design because it targets Ethernet over twisted-pair media. The KSZ8041FTLI adds 100BASE-FX support, making it more appropriate for fiber links and media-converter equipment. Although both belong to the KSZ8041 family, the added optical-media capability in the FTLI part is functional rather than merely a packaging change, so the media architecture should drive the selection.
When should I choose KSZ8041TL-S over KSZ8041TLI-S?
Choose KSZ8041TL-S when the system temperature range, regulatory qualification, and production configuration specifically correspond to that ordering code. Choose KSZ8041TLI-S when an extended industrial temperature range is required and the manufacturer confirms its host-interface and configuration behavior. The KSZ8041TL is associated with 0 °C to +70 °C operation, while the TLI family is associated with operation from -40 °C to +85 °C.
What can replace the KSZ8041TL-S?
The closest documented same-family drop-in candidates are KSZ8041TL, KSZ8041TLI-S, KSZ8041TLI-TR, and KSZ8041FTLI, all associated with 48-TQFP KSZ8041-family devices. No confirmed cross-brand, pin-compatible equivalent was established. Because TL, TLI, FTL, and packaging suffixes can affect temperature grade, media support, interface configuration, or orderable form, use the Request a Quote form for availability and require a manufacturer-based compatibility review before changing the fitted MPN.
Is KSZ8041TL-S suitable for industrial Ethernet equipment?
The KSZ8041TL-S is technically suitable for 3.3 V copper Ethernet equipment when its specified operating-temperature and qualification requirements fit the enclosure environment. The target is associated with the TL ordering family, while the TLI variant is identified with an extended -40 °C to +85 °C range. For deployed industrial equipment, confirm the exact suffix temperature grade, isolation requirements, surge exposure, and regulatory needs for the complete system.
Does KSZ8041TL-S support RMII and SMII?
Yes, the KSZ8041TL-S supports MII, RMII, and SMII host interfaces. According to the Microchip manufacturer product page, the KSZ8041 family provides these interfaces for transmitting and receiving data to a compatible Ethernet MAC. RMII can reduce host-side signal count in cost-sensitive designs, while SMII provides a wider parallel interface for systems that prioritize host throughput or have different timing constraints.
Does the KSZ8041TL-S support 100BASE-FX fiber?
The KSZ8041TL-S is a 10BASE-T/100BASE-TX copper Ethernet transceiver and does not provide the 100BASE-FX support associated with the KSZ8041FTL family member. The official family datasheet describes the FTL part as adding 100BASE-FX for fiber and media-converter applications. Use KSZ8041TL-S for standard twisted-pair links; select a fiber-capable family member when the design must connect to 100BASE-FX optical media.
How much power does the KSZ8041TL-S need?
The KSZ8041TL-S requires a single 3.135 V to 3.465 V supply, corresponding to a nominal 3.3 V operating rail. The family’s mixed-signal design is specifically described as reducing power consumption while extending signaling distance. Exact current consumption can vary with operating mode, interface selection, and Ethernet activity, so use the manufacturer datasheet for worst-case supply-current calculations and provide local decoupling close to the device.
What PCB considerations matter for KSZ8041TL-S?
Follow the official KSZ8041TL Hardware Design Checklist for the Ethernet magnetics interface, supply layout, reset sequencing, and PHY strapping. Place input and output bypass capacitors close to their respective pins, route sensitive differential signals as a controlled-impedance pair, and keep the copper network interface physically separated from noisy circuitry. The checklist specifically notes that strap values are latched at power-up or reset and that MAC receive pins can affect startup behavior.
How is the KSZ8041TL-S configured at startup?
The KSZ8041TL-S uses PHY strap pins to establish configuration at power-up. The Microchip hardware design checklist states that strap values are latched when power is applied or the device is reset. Designers should therefore select each strap level, account for leakage and pull-up or pull-down resistance, and ensure connected host signals do not disturb the sampled levels. The datasheet pin table should be used for the authoritative strap assignments.
Where can I buy KSZ8041TL-S and what is its lead time?
Use the Request a Quote form on this page to request KSZ8041TL-S pricing, current inventory, minimum order quantity, and production lead time. The Request a Quote workflow provides a current commercial response without relying on static price or availability statements that can change quickly. Confirm the required package suffix, tray packaging, and order quantities when submitting the request.
What is the price of KSZ8041TL-S?
Current KSZ8041TL-S pricing is available through the Request a Quote form on this page. The form accepts the requested quantity and package configuration so the commercial team can return current supply and order information. Pricing depends on volume, order quantity, and sourcing conditions, so a price entered into an engineering document should be tied to the quote date rather than treated as a permanent catalog value.
Is KSZ8041TL-S in stock?
Current KSZ8041TL-S stock status should be confirmed through the Request a Quote form on this page. Provide the required quantity and any date-specific delivery constraint so the supply team can return an actionable availability and lead-time response. Because inventory at the exact KSZ8041TL-S ordering code can change, purchasing decisions should use the current quote response rather than a static stock statement.

داتای سەرچاوەی ئەندازیاری بۆ KSZ8041TL-S — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose KSZ8041TL-S for a 3.3 V, 10/100BASE-TX copper Ethernet design that uses MII, RMII, or SMII and requires the 48-TQFP footprint. Select KSZ8041TL when its 0 °C to +70 °C operating range and ordering configuration meet the design; it otherwise serves the same copper-PHY family role. Use KSZ8041TLI-S or KSZ8041TLI-TR when the -40 °C to +85 °C industrial temperature range is necessary and the manufacturer confirms the exact interface configuration. Choose KSZ8041FTLI only when 100BASE-FX fiber support is beneficial, such as in a media converter. No confirmed cross-brand drop-in equivalent was identified, so a replacement should be approved against the manufacturer pinout, strap table, temperature grade, media capability, and host-interface requirements.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە KSZ8041TL KSZ8041TLI-S KSZ8041TLI-TR KSZ8041FTLI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7)
Copper Ethernet Support 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX 10BASE-T, 100BASE-TX, and 100BASE-FX
100BASE-FX Support No No No No Yes

جیاکەرەوە سەرەکییەکان

  • Supports three copper-PHY host-interface modes (بەراورد بەKSZ8041TLI-S)
  • Copper-focused 10/100BASE-TX implementation (بەراورد بەKSZ8041FTLI)
  • Single 3.3 V supply operation (بەراورد بەKSZ8041TL)

تێبینییەکانی دیزاین

Follow the Microchip KSZ8041TL Hardware Design Checklist for the magnetics-side layout. Route each Ethernet differential pair over a continuous reference plane, keep input and output pairs separated, minimize stubs, and avoid placing the network interface beneath high-current switching nodes. Position the external magnetics and protection components in accordance with the reference layout so surge-current paths do not cross sensitive PHY or MAC traces.

Do not let host outputs disturb PHY strap levels before power-up or reset. The manufacturer checklist states that strap values are latched during startup or reset and warns that MAC receive pins may drive high during those intervals. Select the correct pull-up or pull-down network, check its effective resistance, and ensure reset sequencing cannot cause an unintended strap state. Validate every reserved or configuration pin against the datasheet pin-description table.

Use a stable 3.3 V rail within the specified 3.135 V to 3.465 V range and place the required bypass capacitors adjacent to the supply and ground pins. Keep the supply return path short and use an uninterrupted ground reference beneath high-speed interface traces. Review the datasheet's operating-mode and worst-case current specifications for the final thermal and power budget, particularly when the PHY supports three possible host-interface configurations.

Choose MII, RMII, or SMII according to the host MAC timing and board-routing limits rather than selecting the interface only from pin count. Maintain the required trace impedance, minimize stubs and unnecessary vias, and provide continuous return paths. On SMII designs, pay particular attention to clock and data-skew management because the wider parallel bus can make routing discipline more demanding than RMII.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The product is an Ethernet interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer product page or declaration.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ksz8041tl datasheet micrel ksz8041tl KSZ8041TL-S datasheet KSZ8041TL-S datasheet pdf KSZ8041TL-S pinout KSZ8041TL-S 48-TQFP KSZ8041TL-S 3.3V PHY KSZ8041TL-S RMII SMII KSZ8041TL-S equivalent KSZ8041TL-S replacement KSZ8041TL-S vs KSZ8041FTLI KSZ8041TL-S price KSZ8041TL-S stock Microchip KSZ8041TL-S

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology KSZ8041TL-S KSZ8041TL KSZ8041TLI-S KSZ8041TLI-TR KSZ8041FTLI Ethernet PHY physical-layer transceiver 10BASE-T 100BASE-TX 100BASE-FX MII RMII SMII Ethernet MAC mixed-signal design 48-TQFP TQFP package family surface mount 3.3 V power supply Ethernet magnetics PHY strapping industrial Ethernet network interface adapter printed circuit board
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ