KSZ8463FMLI - 3-Port 10/100 Managed Ethernet Switch | Microchip
MPN: KSZ8463FMLI ✓ چالاکKSZ8463FMLI گشتی
A managed Ethernet switch is a network semiconductor that connects multiple physical-network ports while implementing configurable traffic handling, status monitoring, and management functions. The KSZ8463 family combines Ethernet switching with precision-time features, placing it within the hierarchy of Ethernet controller, network interface controller, industrial Ethernet IC, and broader communication semiconductor.
The KSZ8463FMLI provides three 10/100 Ethernet ports and supports either MII or RMII connectivity to a host processor. These interfaces let the device operate as the Ethernet-facing switching element in embedded industrial equipment, where deterministic communication and synchronization are important. The KSZ8463 family is specifically identified as IEEE 1588v2 enabled for distributed communications and timing applications.
Fibre support adds an important deployment option for industrial networks whose copper links have distance, interference, or topology limitations. Although the external transceiver and optical implementation details are not established by the product-page summary, the fibre-support designation identifies the KSZ8463 as a suitable switching component for optical industrial Ethernet links when paired with appropriate external hardware.
Typical uses include industrial Ethernet bridges, embedded control equipment, synchronized test systems, factory-network infrastructure, and communication interfaces that require managed three-port Ethernet connectivity. In these systems, the MII or RMII interface connects the switch to a local controller, while its Ethernet ports extend connectivity to sensors, programmable logic controllers, industrial computers, and other network nodes.
Designers should review the manufacturer pin-description table and interface reference section before assigning PCB signals, supplying clocking, and configuring the host interface. The 64-LQFP footprint also requires deliberate escape routing for the high-speed MII or RMII signals, differential Ethernet pairs, clock inputs, power rails, and management connections.
This page organizes the available manufacturer and distributor information into an engineering-focused view of interfaces, synchronization, packaging, application fit, and design considerations. It also highlights the distinction between verified product attributes and parameters that require confirmation from the complete manufacturer datasheet before a new PCB is released.
جێگرەوەکانی جێگۆڕکێ بۆ KSZ8463FMLI — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ KSZ8463FMLI (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Host Interface, Package, Product Type, Supported Ethernet Data Rates.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەKSZ8463FMLI زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Managed Ethernet Switch |
| Ethernet Port Count | 3 ports |
| Supported Ethernet Data Rates | 10 Mb/s and 100 Mb/s |
| Host Interface | MII and RMII |
| Synchronization Standard | IEEE 1588v2 |
| Ethernet Family | EtherSynch |
| Fibre Support | Supported |
| پاکێج | 64-LQFP |
| Package Body Size | 10 mm x 10 mm |
| جۆری دامەزراندن | Surface Mount |
ڕێنمایی ڕێکخستنی پینی KSZ8463FMLI 10 mm x 10 mm
ڕێکخستنی پین بۆ KSZ8463FMLI (پاکێجی 10 mm x 10 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ KSZ8463FMLI.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
KSZ8463FMLI گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Synchronization, Embedded Network Bridge, Factory Automation Controller, Optical Industrial Link, Precision Test Equipment, Industrial Network Infrastructure.
Industrial Ethernet Synchronization
The KSZ8463FMLI fits industrial Ethernet equipment that must combine local switching with distributed timing. Its three 10/100 ports provide connectivity among a host controller and two network endpoints, while IEEE 1588v2 support gives the design a standardized synchronization path. The MII or RMII choice lets the system match the processor interface, and the 64-LQFP package keeps the device practical for compact control equipment. Validate the timing topology, clock source, and port configuration in the manufacturer reference documentation before deployment.
پێشنیارکراو
Embedded Network Bridge
The KSZ8463FMLI is suitable for an embedded Ethernet bridge that connects a host processor to multiple field devices. Three 10/100 ports can organize one uplink and two downstream links, while the MII or RMII interface reduces host-side integration complexity. Managed-switch behavior supports structured traffic handling in industrial controllers and networked instruments. PCB planning should preserve controlled impedance for Ethernet pairs, short clock paths, solid grounding, and clean power distribution around the 64-LQFP device.
پێشنیارکراو
Factory Automation Controller
A factory automation controller can use the KSZ8463FMLI to provide managed three-port Ethernet connectivity alongside IEEE 1588v2 timing. The device is appropriate for equipment that exchanges data with sensors, drives, remote I/O, or supervisory systems over 10/100 networks. RMII can suit a host processor with limited pin availability, while MII offers a parallel alternative for a different interface architecture. Review the exact pin-description table, external magnetic-interface components, and system timing requirements before finalizing the board.
پێشنیارکراو
Optical Industrial Link
The fibre-support capability of the KSZ8463FMLI makes it relevant to industrial links where copper reach or electrical noise is undesirable. The switch can sit between a host interface and optical-capable network connections when supported by the appropriate external transceiver arrangement. Its three-port managed architecture also permits local aggregation of synchronized Ethernet traffic. Designers should confirm which fibre paths require external components, what media the selected configuration supports, and whether bypass, auto-negotiation, or timing behavior affects the intended topology.
پێشنیارکراو
Precision Test Equipment
The KSZ8463FMLI can serve in synchronized test and measurement equipment that requires both Ethernet connectivity and distributed timing. IEEE 1588v2 support provides the synchronization foundation for communicating measurement nodes, while three 10/100 ports allow multiple instruments or service interfaces to share the switching function. The MII and RMII choices provide flexibility across host architectures. For laboratory-grade results, evaluate clock accuracy, jitter, isolation, grounding, and media compatibility against the system timing budget.
پێشنیارکراو
Industrial Network Infrastructure
The KSZ8463FMLI is appropriate for compact industrial network infrastructure that needs a managed three-port Ethernet node with synchronization capability. It can support local bridges, edge communication modules, programmable-logic-controller accessories, and distributed control endpoints operating at 10 or 100 Mb/s. Its compact 64-LQFP package supports equipment density, while EtherSynch functionality adds value where several nodes must maintain coordinated timing. Plan thermal performance, Ethernet magnetics, reset and clock circuitry, and accessible configuration interfaces for production maintenance.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ KSZ8463FMLI — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Brand | Microchip Technology |
| Package | 64-LQFP (10 mm x 10 mm) |
| Product Type | Managed Ethernet Switch |
| Ethernet Port Count | 3 ports |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Host Interface | MII and RMII |
| Synchronization Standard | IEEE 1588v2 |
| Fibre Support | Supported |
| Product Family | EtherSynch |
جیاکەرەوە سەرەکییەکان
- Three-port managed Ethernet integration (بەراورد بەKSZ8863)
- Host-interface flexibility (بەراورد بەTLK10071)
- Industrial synchronization positioning (بەراورد بەBCM53115)
تێبینییەکانی دیزاین
Assign MII or RMII signals directly from the manufacturer pin-description table and keep the selected host interface unambiguous. MII uses more parallel signal paths than RMII, while both require short, controlled routing from the host controller. Confirm whether the implementation uses an external reference clock or internal clock source and preserve the documented connection arrangement. Do not assign the alternate host-interface pins by analogy because the two configurations differ in pin usage.
Route each 10/100 Ethernet differential pair as a continuous impedance-controlled transmission line with symmetrical geometry, minimal stubs, and a continuous reference plane. Keep the Ethernet magnetics or fibre-interface circuitry close to the corresponding switch pins and provide the decoupling arrangement specified by the manufacturer. MII or RMII clock traces also require controlled return paths and minimized skew exposure. Review rise-time limits, trace geometry, and layer transitions with the complete interface guidance.
Review the KSZ8463MLI and KSZ8463FMLI errata for application-specific behavior before freezing the design. In particular, the published errata discusses port enable behavior for Spanning Tree Protocol and the handling of IEEE 1588 peer-to-peer messages when a port is closed. Configuration logic and software should account for the resulting packet-forwarding behavior, especially in bridged or redundant industrial network topologies.
Estimated: thermal dissipation must be evaluated from the actual supply voltage, port activity, and environmental temperature because the available product summary does not establish a maximum power value. Use the manufacturer power-consumption and thermal information for the selected operating mode. Preserve copper area around the LQFP leads where the footprint permits it, maintain unobstructed airflow in enclosed equipment, and verify junction temperature under worst-case network traffic rather than an idle condition.
Treat the KSZ8463FMLI and other KSZ8463 family members as distinct orderable configurations until their suffix-specific options have been compared. The shared errata document does not by itself prove identical electrical, fibre, host-interface, or pin functionality. Before using a related MPN, verify the exact package, interface assignment, clock requirements, transceiver arrangement, and register behavior. This prevents a family-level substitution from creating a board-level incompatibility.
زانیاری پابەندبوون
The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements using the current manufacturer product documentation before production release.