KSZ8463FRLI - 3-Port 10/100 Ethernet Switch | Microchip
MPN: KSZ8463FRLI ✓ چالاکKSZ8463FRLI گشتی
An Ethernet switch is a network semiconductor that receives frames on one port and forwards them to another port using MAC-address information. The KSZ8463 family belongs to the EtherSynch product line, where EtherSynch combines Ethernet switching with IEEE 1588 precision time protocol functions. This makes the device useful in industrial automation, test systems, and synchronized control networks where data transfer and time correlation must occur within one platform.
The KSZ8463FRLI provides three 10/100 Ethernet ports and a generic host interface with MII or RMII options. Its IEEE 1588v2 capability supports distributed clock and synchronization functions for industrial Ethernet applications. The 64-LQFP package provides 64 externally accessible connections and is suitable for multilayer PCB designs requiring several copper interfaces, control signals, power rails, and management functions.
Microchip describes the device as a precision-time-protocol-enabled managed switch. Managed-switch operation supports configurable network behavior rather than acting as a simple frame-forwarding bridge. The combination of three 10/100 ports, synchronization support, and a selectable host interface consolidates several network functions into one device, reducing component count in systems requiring more than a basic two-port Ethernet interface.
Typical applications include industrial PLC and factory-automation controllers, networked measurement equipment, synchronized data-acquisition systems, embedded control platforms, and optical-network interfaces. For copper-based networks, the integrated 10/100 ports support Fast Ethernet links. Where electrical copper links are unsuitable or fiber connectivity is required, the KSZ8463 family's fiber-support capability can be used as part of a larger network design.
PCB implementation requires careful separation of Ethernet signal groups, clock domains, power supplies, and digital control signals. Place all required decoupling capacitors close to their associated supply pins, preserve the manufacturer-recommended Ethernet magnetics and impedance-controlled routing geometry, and use a solid ground plane. Management firmware and host-interface configuration must also match the selected MII or RMII implementation.
This product page combines the manufacturer family description with distributor package and interface data, then adds application-focused design guidance, comparison structure, and sourcing instructions. It is intended to help engineers identify whether the three-port managed switching, IEEE 1588v2 synchronization, and 64-LQFP integration fit an industrial Ethernet design before requesting a quote.
جێگرەوەکانی جێگۆڕکێ بۆ KSZ8463FRLI — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ KSZ8463FRLI (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Fiber Support, Host Interface, Package.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەKSZ8463FRLI زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | IEEE 1588v2-enabled managed Ethernet switch |
| Ethernet Port Count | 3 ports |
| Ethernet Data Rate | 10/100 Mb/s per port |
| Synchronization Standard | IEEE 1588v2 |
| Host Interface | MII or RMII |
| Generic Host Interface | Supported |
| Fiber Support | Supported by the KSZ8463 family |
| پاکێج | 64-LQFP (10 x 10 mm) |
| ژمارەی پین | 64 pins |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی KSZ8463FRLI 64-lqfp (10 x 10 mm)
ڕێکخستنی پین بۆ KSZ8463FRLI (پاکێجی 64-lqfp (10 x 10 mm)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ KSZ8463FRLI.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
KSZ8463FRLI گونجاوە بۆ 6 بەکارھێنانs: Industrial PLC Ethernet Control, Factory Automation Data Collection, Synchronized Test and Measurement, Precision Time Protocol Network Gateway, Embedded Network Control Platform, Fiber-Enabled Industrial Network.
Industrial PLC Ethernet Control
The KSZ8463FRLI fits a PLC or industrial controller requiring three 10/100 Ethernet connections rather than a single isolated network port. Its managed-switch behavior allows the controller to participate in filtered local Ethernet traffic, while the generic MII or RMII host interface supports integration with an embedded processor or communication controller. IEEE 1588v2 capability can synchronize controller events with other devices on the industrial network. The 64-LQFP, 10 x 10 mm package provides the mixed power, control, clock, and Ethernet connections required by this platform, although the host timing and firmware configuration must match the selected processor.
پێشنیارکراو
Factory Automation Data Collection
Use the KSZ8463FRLI in factory data-collection equipment that connects controllers, sensors, and service computers over Fast Ethernet. Its three 10/100 ports can consolidate multiple 10/100-Mb/s network segments in one device, and managed operation supports controlled traffic handling at the edge of the plant network. IEEE 1588v2 synchronization is valuable when acquisition timestamps must be aligned across distant machines. The generic host connection allows either MII or RMII integration, but the selected mode determines signal count, timing constraints, and firmware requirements. Use the manufacturer reference design and pin description to preserve routing and grounding performance.
پێشنیارکراو
Synchronized Test and Measurement
The KSZ8463FRLI is appropriate for synchronized test equipment that must transfer measurement data while maintaining a common time base. Three 10/100 ports can connect an instrument controller, a remote measurement node, and an Ethernet management segment, while IEEE 1588v2 support addresses distributed clock and synchronization requirements. The MII or RMII host interface offers two host integration paths, with RMII generally reducing interface pin count where its timing requirements can be met. Designers should verify clock-source configuration, timestamp behavior, and management firmware against the KSZ8463 documentation. Stable references and controlled clock distribution are especially important in precision timing systems.
پێشنیارکراو
Precision Time Protocol Network Gateway
The KSZ8463FRLI can serve as the switching and synchronization element in an IEEE 1588v2 gateway or industrial timing bridge. Its three 10/100 ports support separate traffic paths for management, timing distribution, and equipment connectivity, while the managed-switch architecture provides more control than an unmanaged two-port bridge. The generic host interface allows gateway logic to monitor or configure switch operation. Exact clock-domain behavior, timestamp resolution, and supported network topology must be established from the manufacturer documentation because family-level summaries do not expose every configuration detail. Maintain short, controlled clock traces and isolate noisy switching activity from sensitive synchronization paths.
پێشنیارکراو
Embedded Network Control Platform
The KSZ8463FRLI is useful in embedded platforms that require local Ethernet switching in addition to a processor-facing network port. A three-port arrangement can support management traffic and two external network interfaces, reducing the need for additional switch silicon. The generic MII or RMII host interface accommodates different host architectures, but the MII mode generally presents more parallel signals than RMII. Because synchronization behavior and management features are central to this EtherSynch device, firmware should explicitly configure the required clock and VLAN functions. PCB planning should reserve the complete 64-LQFP footprint and follow manufacturer placement guidance for supplies and clock circuitry.
پێشنیارکراو
Fiber-Enabled Industrial Network
The KSZ8463FRLI can participate in fiber-enabled industrial Ethernet designs because the KSZ8463 family supports fiber connectivity alongside its three 10/100-port switching function. This allows an embedded controller to bridge or segment industrial traffic while using optical links where galvanic isolation, distance, or electrical-noise immunity is important. The copper and optical implementation must follow the manufacturer's supported media and magnetic-component guidance. Host interfacing through MII or RMII provides access to the switching and synchronization engine, while IEEE 1588v2 supports timing across industrial nodes. Validate fiber-media compatibility, loss budget, isolation strategy, and recovery behavior during prototype testing.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ KSZ8463FRLI — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Package | 64-LQFP (10 x 10 mm) |
| Brand | Microchip Technology |
| Ethernet Port Count | 3 ports |
| Ethernet Data Rate | 10/100 Mb/s |
| Switch Management | Managed switch |
| Synchronization Standard | IEEE 1588v2 |
| Host Interface | MII or RMII generic host interface |
| Fiber Support | Supported by the KSZ8463 family |
| Pin Count | 64 pins |
| Mounting Type | Surface mount |
جیاکەرەوە سەرەکییەکان
- Combines managed switching with precise synchronization (بەراورد بەKSZ8873 family switches)
- Provides a selectable generic host connection (بەراورد بەLAN9303 managed Ethernet controller)
- Targets industrial EtherSynch networking (بەراورد بەKSZ8463MLI)
تێبینییەکانی دیزاین
Assign every connection from the manufacturer's 64-LQFP pin-description table before laying out the board. Place the device-side bypass capacitors adjacent to their associated power pins, use the recommended ground-pin arrangement, and keep the exposed footprint compatible with the specified 10 x 10 mm package. Confirm the package drawing and pin-1 orientation independently of any generic library footprint.
Route each Ethernet differential pair as a controlled-impedance pair with continuous reference planes and avoid splits across board layers or plane boundaries. Keep connector, magnetics, and switch interfaces away from switching regulators and high-current return paths. Use the manufacturer's recommended termination and component arrangement because RMII and MII clock timing, rise time, and trace topology differ.
Separate the host clock from Ethernet data signals and keep clock traces short, direct, and away from noisy switching nodes. When using RMII, route clock and data with matched topology and verify setup and hold timing under worst-case process, voltage, and temperature conditions. When using MII, account for the larger parallel interface and provide clean, individually terminated signal paths.
Do not treat the KSZ8463MLI or KSZ8463RLI as drop-in replacements solely because they are listed as related KSZ8463-family devices. Before substituting either part, compare its package dimensions, pin names, power requirements, supported media, clock architecture, host-interface modes, management features, and software configuration. Confirm every difference against the manufacturer documentation and your PCB footprint.
Decouple the device according to the manufacturer recommendations and account for the combined load of the Ethernet magnetics, host interface, clock circuitry, and attached transceiver modules when sizing supplies. Use the datasheet's absolute maximum and recommended operating limits for every rail. Decoupling values and supply-current figures are not stated in the available product summaries and must be taken from the manufacturer documentation.
زانیاری پابەندبوون
Compliance declarations for the exact KSZ8463FRLI ordering option are not included in the available product summaries. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the manufacturer before release.