KSZ8873FLLI - 3-Port 10/100 Managed Ethernet Switch | Microchip Technology
MPN: KSZ8873FLLI ✗ کۆتایی ژیانKSZ8873FLLI گشتی
A managed Ethernet switch is a network-semiconductor device that combines multiple physical-layer interfaces, frame handling, and local configuration control into one integrated circuit. The KSZ8873 family is designed for compact, low-port-count, cost-sensitive, and power-efficient 10/100 Mbps switch systems. Its three-port architecture can support copper Ethernet connections alongside a fiber-oriented 100 Base-FX interface when the required external magnetics and line-side implementation are included.
Key device characteristics include three integrated 10/100 network ports, 100 Base-FX PHY capability, MII interfacing, and configuration access through I2C or SPI. The KSZ8873FLLI operates across a -40 °C to +85 °C temperature range, making it suitable for industrial equipment, communications equipment, embedded systems, and controlled networking products. The 64-LQFP package provides a standardized surface-mount footprint for industrial and embedded PCB designs.
The device is designed to reduce the component count required for a small managed Ethernet switch. Integrated PHYs simplify the connection between the switch core and external magnetics, while I2C and SPI provide alternative management paths for system-level configuration. The MII interface can be used with an external network processor or controller when the system architecture requires frame handling outside the switch IC.
Typical applications include industrial Ethernet gateways, serial-to-Ethernet equipment, embedded network controllers, communications equipment, and compact Ethernet switches. Designers should confirm the required port mix, fiber or copper media support, external magnetics, management interface, and supply sequencing before finalizing the PCB layout. Use the manufacturer pin-description table and application schematics when assigning tracks and selecting bypass components.
This page organizes the KSZ8873FLLI's verified electrical, package, interface, environmental, and management information, alongside practical design guidance and related KSZ8873 family choices. The comparison focuses on functional differences among the documented 64-LQFP family members rather than assuming that every similarly named Ethernet switch is interchangeable.
جێگرەوەکانی جێگۆڕکێ بۆ KSZ8873FLLI — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ KSZ8873FLLI (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Supply Voltage Options, Data Rate, Fiber Support.
KSZ8873MLLI
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →KSZ8873RLLI
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →KSZ8873FLLI زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Integrated 3-port 10/100 managed Ethernet switch |
| Number of Ports | 3 ports |
| خێرایی داتا | 10 Mbps to 100 Mbps |
| Copper Ethernet Support | 10/100 Mbps integrated PHYs |
| Fiber Support | 100 Base-FX PHY |
| Management Interfaces | I2C and SPI |
| Network Interface | MII |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| Operating Supply Voltage Range | 2.375 V to 3.465 V |
| مەودای پلەی گەرمیی کارکردن | -40 °C to +85 °C |
| پاکێج | 64-LQFP, 10 x 10 mm |
| جۆری دامەزراندن | Surface mount |
| Controller Classification | Ethernet switch controller |
| Switch Architecture | Managed switch with integrated PHYs |
ڕێنمایی ڕێکخستنی پینی KSZ8873FLLI 64-lqfp, 10 x 10 mm
ڕێکخستنی پین بۆ KSZ8873FLLI (پاکێجی 64-lqfp, 10 x 10 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ KSZ8873FLLI.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
KSZ8873FLLI گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Gateway, Serial-to-Ethernet Equipment, Embedded Network Controller, Compact Communications Equipment, Network Appliance with Fiber Uplink, Embedded Control and Diagnostics Hub.
Industrial Ethernet Gateway
The KSZ8873FLLI is a practical fit for compact industrial Ethernet gateways that need multiple 10/100 Mbps ports without implementing a complete switch subsystem on discrete PHY devices. Its integrated 3-port architecture reduces the number of separate copper-interface components, while the documented 100 Base-FX PHY capability supports designs that include a fiber uplink. I2C or SPI management can connect the switch to a host controller for address, port, and operating configuration. The MII interface provides a path to an external network processor when the system requires centralized frame handling. For industrial equipment, the -40 °C to +85 °C operating range supports controlled-temperature deployments, while the 64-LQFP, 10 x 10 mm footprint keeps the design compatible with compact embedded boards.
پێشنیارکراو
Serial-to-Ethernet Equipment
KSZ8873FLLI can support serial-to-Ethernet and industrial communication equipment that requires a local Ethernet connection alongside an embedded host interface. The integrated PHYs provide the physical-layer foundation for 10/100 Mbps copper links, while MII allows connection to an external Ethernet controller or processor. The 100 Base-FX feature is useful when the same equipment must communicate over a short fiber link in an electrically noisy or distance-sensitive installation. I2C and SPI options provide flexibility for connecting the switch to different embedded control architectures. Designers should budget external magnetic components for copper ports, select the appropriate fiber components for 100 Base-FX operation, and validate the MII timing and signal-integrity requirements in the final system layout.
پێشنیارکراو
Embedded Network Controller
The KSZ8873FLLI is suitable for an embedded network controller in which a host processor requires several low-speed Ethernet ports for configuration, diagnostics, or service access. The 3-port 10/100 Mbps configuration allows one device to consolidate multiple copper connections, while the MII interface can expose the switch to a controller with an appropriate media-access architecture. I2C and SPI management gives the host multiple ways to initialize and monitor the switch. In a compact embedded product, the 64-LQFP package and integrated PHYs can reduce board area compared with several standalone PHY arrangements. The design must still address power sequencing, supply decoupling, external magnetics, port LEDs, and the thermal environment around the controller enclosure.
پێشنیارکراو
Compact Communications Equipment
For communications equipment requiring a small managed Ethernet switch, KSZ8873FLLI provides a compact combination of three 10/100 Mbps ports and integrated PHYs. Its 64-LQFP, 10 x 10 mm package is suitable for equipment where board area is constrained, and its -40 °C to +85 °C rating supports environments beyond typical room-temperature consumer products. The 100 Base-FX option can provide a fiber-oriented uplink when system requirements call for it, while I2C and SPI management allow configuration by an embedded supervisory circuit. The MII interface can also support designs where an external controller handles higher-level packet processing. Verify the exact copper-versus-fiber port arrangement, required optical and isolation components, and management firmware expectations before releasing the PCB design.
پێشنیارکراو
Network Appliance with Fiber Uplink
KSZ8873FLLI is a strong candidate for small network appliances that combine copper access ports with a fiber uplink. The documented 100 Base-FX PHY capability allows the switch IC to participate in a 100 Mbps fiber network segment, while the 3-port arrangement can serve additional copper-facing ports in the appliance. I2C or SPI management can support startup sequencing, port configuration, and status monitoring from an appliance controller. The MII interface offers another implementation path for systems with an external network processor. Engineering attention should focus on the optical or transceiver subsystem, isolation requirements, copper magnetics, port media reach, and the power budget. Because the exact family-member feature differences are not fully specified in the available comparison listings, engineers should confirm the selected variant directly against the manufacturer documentation.
پێشنیارکراو
Embedded Control and Diagnostics Hub
The KSZ8873FLLI can be used in embedded control and diagnostics hubs that need a small, deterministic Ethernet switching function alongside a supervisory processor. Three integrated 10/100 Mbps PHYs provide local connectivity for sensors, service interfaces, and configuration links, while I2C or SPI gives the supervisory controller a management path. The MII interface may be used when the system architecture requires a separate controller for frame processing. Its -40 °C to +85 °C range is useful for equipment deployed in industrial cabinets or other temperature-controlled locations. A successful implementation depends on careful PCB partitioning, proper power and ground distribution, correct external magnetics, and verification of the manufacturer's recommended reference layout and external component values.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ KSZ8873FLLI — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | KSZ8873MLLI | KSZ8873RLLI |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-LQFP (10x10) | 64-LQFP family context | 64-LQFP family context |
| Device Type | Integrated 3-port 10/100 managed Ethernet switch | KSZ8873 three-port managed-switch family member | KSZ8873 three-port managed-switch family member |
| Port Count | 3 ports | 3-port family context | 3-port family context |
| Data Rate | 10 Mbps to 100 Mbps | 10/100 Mbps family context | 10/100 Mbps family context |
جیاکەرەوە سەرەکییەکان
- Documented 100 Base-FX PHY capability (بەراورد بەKSZ8873MLLI)
- 3-port integrated 10/100 Mbps switch with PHYs (بەراورد بەKSZ8873RLLI)
- Multiple management and host-interface options (بەراورد بەKSZ8873RLLI)
تێبینییەکانی دیزاین
Place the KSZ8873FLLI power-supply bypass network and the external components for each copper port close to their associated pins. Separate the digital management and MII routing from the copper PHY and 100 Base-FX-related routing where the reference layout permits it. Keep the 64-LQFP footprint and pad geometry tied to the manufacturer package drawing rather than approximating the 10 x 10 mm outline.
Do not treat the 1.8 V, 2.5 V, and 3.3 V supply-voltage statements as a substitute for the operating range. The documented operating supply range is 2.375 V to 3.465 V, so confirm the rails present in the design and the required external component values. Also verify whether the selected KSZ8873 family variant provides the required copper and 100 Base-FX port arrangement before committing the PCB.
Use the manufacturer application schematic and pin-description table to route MII, I2C, SPI, clock, reset, and power signals. MII timing can be sensitive to trace length, impedance, and return-path continuity, while I2C and SPI management lines should be kept away from noisy copper-port and fiber-interface nodes. Confirm all test points, grounding, and connector isolation requirements in the system schematic.
زانیاری پابەندبوون
The available product descriptions mention RoHS and REACH in comparison results, but do not provide the corresponding compliance values for KSZ8873FLLI. AEC-Q100 status was not identified.