KSZ8893MBLI - 3-Port 10/100 Managed Ethernet Switch | Microchip
MPN: KSZ8893MBLI ✓ چالاکKSZ8893MBLI گشتی
An Ethernet switch is a semiconductor that connects multiple network endpoints through a dedicated frame-forwarding datapath. The managed-switch category extends basic Layer 2 forwarding with configuration, traffic-control, and status features. Within the hierarchy, KSZ8893MBLI is an Ethernet switch, then a managed Layer 2 switch, then a network interface IC and an integrated circuit for communications equipment.
The KSZ8893MBLI integrates rate limiting, tagged and port-based VLAN support, QoS priority, port management, and Management Information Base counters. These functions allow a host processor to configure traffic handling and monitor switch activity through a serial management interface. The I2C and SPI interfaces provide alternatives for embedded system integration, while RMII, MII, and SNI connectivity support different processor and PHY arrangements.
The KSZ8893 family is positioned for cost-sensitive, low-port-count 10/100 Mbps networks. A three-port configuration can support multiple wired endpoints without requiring a larger switch, while Layer 2 management features help implement controlled industrial, communications, and embedded Ethernet equipment. The SNI interface is particularly relevant to designs where an integrated network interface on the host supplies physical-layer connectivity.
The KSZ8893MBLI is offered in a compact 100-pin LFBGA package, supporting space-constrained industrial and embedded designs. Layout requires careful high-speed trace routing, solid supply distribution, and effective decoupling. Use the manufacturer’s pin-description table and reference design guidance when assigning signals and placing bypass capacitors, especially for RMII, MII, and SNI implementations.
This page combines the manufacturer’s device positioning with practical application guidance, interface-selection context, and verified lifecycle information. It also identifies where design engineers should consult the official datasheet for the complete pin list, electrical limits, register map, layout guidance, and device-specific recommendations before releasing a PCB.
جێگرەوەکانی جێگۆڕکێ بۆ KSZ8893MBLI — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ KSZ8893MBLI (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, VLAN Support, Host Interface, RoHS Compliance.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەKSZ8893MBLI زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Layer 2 managed Ethernet switch |
| Number of Ports | 3 ports |
| Supported Ethernet Speeds | 10/100 Mbps |
| Copper Interface | 10/100 Base-TX |
| Fiber Interface | 10/100 Base-FX |
| Host Interface Options | RMII, MII, and SNI |
| Management Interfaces | I2C and SPI |
| Layer | Layer 2 |
| Traffic Control | Rate limiting |
| VLAN Support | Tag-based and port-based VLAN |
| Traffic Prioritization | QoS priority |
| Status Monitoring | Management Information Base counters |
| Supply Voltage Range | 3.1 V to 3.5 V |
| پاکێج | 100-pin LFBGA |
| Packaging | Tray |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
ڕێنمایی ڕێکخستنی پینی KSZ8893MBLI 100-pin lfbga
ڕێکخستنی پین بۆ KSZ8893MBLI (پاکێجی 100-pin lfbga). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ KSZ8893MBLI.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
KSZ8893MBLI گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Gateway, Embedded Control Panel, Networked Measurement Instrument, Communications Equipment, Embedded Media and Control Hub, Cost-Sensitive Low-Port-Count Switch.
Industrial Ethernet Gateway
The KSZ8893MBLI suits an industrial gateway that must consolidate several 10/100 Mbps endpoints while retaining Layer 2 traffic control. Its three-port configuration can connect field equipment, a service interface, and an upstream controller without requiring a larger port count. Rate limiting helps control unexpected traffic bursts, while tagged and port-based VLAN support can segregate equipment traffic by port or network membership. I2C or SPI provides a practical management path for an embedded processor, and RMII, MII, or SNI allows the host-side interface to match the system processor and PHY arrangement. Because this device is limited to 10/100 Mbps, the design should account for its lower throughput compared with a Gigabit Ethernet switch.
پێشنیارکراو
Embedded Control Panel
The KSZ8893MBLI can connect a controller, service equipment, and networked sensor interface in a compact embedded control panel. Three 10/100 Mbps ports provide enough connectivity for a small local network while conserving board area through the 100-pin LFBGA package. QoS priority allows important control or supervisory traffic to receive preferential treatment, and port-based VLAN can keep attached devices logically separated. SNI is useful when the host provides the required Ethernet physical interface, while RMII or MII offers alternatives for different processor configurations. The final design must follow the manufacturer’s ball map and high-speed routing guidance to maintain signal and power integrity.
پێشنیارکراو
Networked Measurement Instrument
The KSZ8893MBLI fits measurement equipment that exposes multiple 10/100 Mbps service or instrument ports. The managed Layer 2 architecture supports rate limiting for shared laboratory or service links, VLAN segmentation for operational traffic, and MIB counters that help a host monitor port activity. RMII and MII connectivity allow integration with processors using different Ethernet media-access controllers, while SNI can simplify designs with host-integrated physical-layer support. Because the switch operates at 10/100 Mbps, it is most appropriate where legacy 10/100 compatibility is more important than Gigabit throughput. Layout should preserve short return paths and place decoupling close to the LFBGA supply balls.
پێشنیارکراو
Communications Equipment
The KSZ8893MBLI supports low-port-count communications equipment requiring managed Ethernet behavior at 10/100 Mbps. Three switched ports can link internal modules, an uplink, or service equipment, while rate limiting provides basic protection against traffic bursts. The I2C and SPI management interfaces allow configuration from a supervisory controller, and the available RMII, MII, and SNI host interfaces support multiple processor architectures. VLAN and QoS features can be used to organize traffic according to service class or administrative domain. For installations that later require more bandwidth or ports, a Gigabit-capable platform may be preferable; the KSZ8893MBLI is strongest where 10/100 Mbps compatibility and integrated management are the priority.
پێشنیارکراو
Embedded Media and Control Hub
The KSZ8893MBLI can serve as the three-port Ethernet hub in an embedded media or control system operating at 10/100 Mbps. Layer 2 features allow the host processor to establish logical port groups, prioritize selected traffic, and observe activity through MIB counters. I2C and SPI simplify control-bus integration, while the three host-interface choices permit a board-level architecture decision based on processor support and pin availability. The switch is especially useful for legacy devices that remain on 10/100 Mbps and do not justify a Gigabit design. Placement around the LFBGA should minimize loop area, maintain continuous ground references, and separate sensitive host-interface routing from noisy power paths where practical.
پێشنیارکراو
Cost-Sensitive Low-Port-Count Switch
The KSZ8893MBLI is designed for cost-sensitive systems that need a small number of 10/100 Mbps ports but still require managed-switch functions. Its three-port configuration avoids the size and complexity of a larger switching platform, while integrated rate limiting, VLAN, QoS priority, and counters add control normally absent from a basic unmanaged switch. Engineers can select RMII, MII, or SNI according to the host processor and PHY strategy, then use I2C or SPI for configuration. The 100-pin LFBGA supports compact assemblies but requires careful PCB layout and assembly planning. Where exact electrical, thermal, and temperature requirements exceed the documented device envelope, select a more suitable Ethernet switch instead of assuming the family variant meets those needs.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ KSZ8893MBLI — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Brand | Microchip Technology |
| Package | 100-pin LFBGA |
| Switch Type | Layer 2 managed Ethernet switch |
| Port Count | 3 ports |
| Ethernet Speed | 10/100 Mbps |
| Network Interfaces | 10/100 Base-TX and 10/100 Base-FX |
| Host Interfaces | RMII, MII, and SNI |
| Management Interfaces | I2C and SPI |
| Traffic Management | Rate limiting, tag-based and port-based VLAN, and QoS priority |
| Status Monitoring | Management Information Base counters |
تێبینییەکانی دیزاین
Use the official 100-pin LFBGA land pattern and pin-description table for PCB construction. Place all required bypass capacitors close to their designated supply balls and provide a low-impedance distribution network for the 3.1 V to 3.5 V operating range. Avoid routing RMII, MII, or SNI signals across power-plane splits, and keep the exposed-package escape paths short to preserve high-speed signal integrity.
RMII and MII timing-sensitive interfaces require continuous reference planes, length-aware routing, and avoidance of unnecessary stubs. SNI routing should follow the manufacturer’s recommended topology and impedance guidance. Check clock, data, and control timing against the selected host processor, and review the complete interface configuration in the manufacturer datasheet before finalizing signal assignment.
Do not substitute a family-related ordering code solely because its name is similar. Before replacing KSZ8893MBLI with KSZ8893MBL or KSZ8893MQL, verify package dimensions, temperature grade, electrical limits, exposed-pad requirements, and every ball assignment. A drop-in decision requires all mechanical and functional conditions to match, not only the switch port count and nominal Ethernet speed.
Separate clock and data routing from noisy switching or power-conversion regions where the board stack permits. Use a solid ground reference, minimize layer transitions on high-speed nets, and avoid running management buses beneath areas with high di/dt currents. Confirm assembly clearances, component placement around the LFBGA, and thermal-via requirements using the package drawing and manufacturer layout guidance.
زانیاری پابەندبوون
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code. The device is a wired Ethernet interface IC and is therefore not treated as an AEC-Q100 automotive component.