LAN9116-MT - 10/100 Ethernet Controller | Microchip
MPN: LAN9116-MT ✗ کۆتایی ژیانLAN9116-MT گشتی
An Ethernet controller is an interface IC that connects a processor or embedded system to an Ethernet network. In the hardware hierarchy, a network interface controller includes the Ethernet MAC, host-facing bus interface, and physical-layer functions required for copper Ethernet communication. The LAN9116 family combines these functions in one device, reducing the number of external interface components needed when an embedded product requires 10/100 Ethernet rather than only a lower-level transceiver.
According to the Microchip LAN9116 datasheet, the controller is intended for embedded applications where performance, flexibility, integration ease, and system cost control are important. Its architecture targets 32-bit applications with medium-to-high performance requirements, while the parallel interface also supports connection to many 16-bit embedded processors. The documented 10/100 Base-T/TX capability allows a system to negotiate 10 Mbps or 100 Mbps operation, while the integrated controller architecture reduces the processing burden imposed on the host CPU.
The LAN9116-MT belongs to the LAN9116 product family and is offered as a 100-pin TQFP implementation. Its parallel host interface is intended to connect with embedded processor buses rather than using the serial interfaces associated with many newer Ethernet controllers. This makes it relevant to established embedded processor platforms where a proven parallel bus, compact 14 x 20 mm package, and integrated 10/100 Ethernet function can simplify a board-level design without requiring a separate PHY.
Typical applications include industrial Ethernet gateways, programmable controllers, factory automation equipment, embedded routers, print servers, set-top boxes, and network-enabled test equipment. The device is also appropriate for compact industrial control systems in which a 16-bit or 32-bit host processor needs deterministic access to Ethernet packet data. Designers should evaluate host-bus timing, magnetics selection, connector integration, and reference-circuit layout against the complete manufacturer datasheet before releasing production hardware.
The primary design consideration is that the LAN9116-MT integrates substantial networking functionality around a parallel host interface. Designers should use the manufacturer reference schematic and placement checklist as the basis for routing the processor interface, supplying the required clock and reset circuitry, and placing magnetics close to the physical-layer section. Input and output constraints, crystal requirements, termination, and decoupling must be verified directly from the manufacturer datasheet rather than inferred from the distributor description.
This page consolidates the verified manufacturer description, distributor package information, family comparisons, and practical selection guidance for LAN9116-MT. It also identifies where verified drop-in alternatives are not established, helping engineers distinguish documented family alternatives from unverified claims while reducing design, sourcing, and integration risk.
جێگرەوەکانی جێگۆڕکێ بۆ LAN9116-MT — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN9116-MT (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Host Interface, Package, Controller Architecture, Physical Layer, Product Type.
LAN9117-MT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN9118-MT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN9116-MT تایبەتمەندییەکان
| Device Type | Single-chip 10/100 Ethernet controller |
| Ethernet Speed | 10 Mbps and 100 Mbps |
| Physical Layer | 10/100 Base-T/TX |
| Host Interface | Parallel interface for 16-bit or 32-bit embedded CPUs |
| Processor Support | 16-bit and 32-bit embedded processors |
| Application Target | Medium-to-high performance 32-bit embedded applications |
| ڤۆڵتیەی دابینکردن | 3.3 V |
| پاکێج | 100-pin TQFP, 14 x 20 mm |
| جۆری دامەزراندن | Surface mount |
| CPU Overhead | Low, per manufacturer family description |
| Ethernet Media | Twisted-pair 10/100 Ethernet |
| Controller Architecture | Highly efficient single-chip non-PCI Ethernet controller |
| Maximum Data Rate | 100 Mbps |
ڕێنمایی ڕێکخستنی پینی LAN9116-MT 100-pin tqfp, 14 x 20 mm
ڕێکخستنی پین بۆ LAN9116-MT (پاکێجی 100-pin tqfp, 14 x 20 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN9116-MT.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LAN9116-MT گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Gateway, Programmable Automation Controller, Embedded Network Management Equipment, Compact Network Test Instrument, Factory Data-Acquisition Terminal, Embedded Router Control Plane.
Industrial Ethernet Gateway
The LAN9116-MT fits an industrial Ethernet gateway where a 16-bit or 32-bit embedded processor needs 10/100 Base-T/TX connectivity without a separate PHY. Its parallel host interface supports established embedded processor architectures, while the integrated controller is designed to limit host-CPU overhead. The 100-pin TQFP package provides ample board area for routing the processor bus, clock circuitry, and magnetics. For industrial deployment, verify the exact temperature grade, isolation strategy, EMC requirements, and grounding scheme before production release.
پێشنیارکراو
Programmable Automation Controller
The LAN9116-MT is suitable for programmable automation controllers that must exchange data over 10 Mbps or 100 Mbps Ethernet while retaining a parallel processor interface. The manufacturer specifically describes the device for embedded applications with medium-to-high performance requirements, including 32-bit systems. Using the integrated 10/100 Base-T/TX controller can reduce board complexity relative to a separate MAC and PHY design. Firmware should use the manufacturer initialization sequence, and the final design must verify bus timing, watchdog behavior, and recovery after link changes.
پێشنیارکراو
Embedded Network Management Equipment
The LAN9116-MT can support compact network-management equipment that needs a wired 10/100 Ethernet management connection and direct access to packet data through a parallel host bus. Its integrated Ethernet controller and physical-layer function reduce the number of networking ICs on the board, while the low-overhead architecture is relevant to management tasks running on a 32-bit embedded processor. Designers should reserve enough board space for the magnetics and follow the placement checklist so the Ethernet section avoids interference with sensitive processor and clock circuitry.
پێشنیارکراو
Compact Network Test Instrument
The LAN9116-MT can be evaluated for a compact network test instrument that communicates over 10/100 Ethernet while using an embedded 16-bit or 32-bit processor. The parallel interface allows the host processor to handle configuration data and status information through a direct bus connection, and the single-chip controller architecture simplifies the required Ethernet hardware. For test equipment, pay particular attention to reference-clock jitter, magnetics selection, isolation, enclosure grounding, and the relationship between packet-processing latency and the host processor's timing budget.
پێشنیارکراو
Factory Data-Acquisition Terminal
The LAN9116-MT is appropriate for a factory data-acquisition terminal that must upload sensor and production data over 10/100 Ethernet. A 32-bit embedded processor can use the parallel interface for direct controller access, and the integrated 10/100 Base-T/TX capability reduces the external networking footprint. The design should include verified Ethernet magnetics, a suitable RJ45 or protected connector arrangement, and board planes that provide a low-impedance return path. Validate the complete operating-temperature range, EMC performance, and cable fault tolerance for the installation environment.
پێشنیارکراو
Embedded Router Control Plane
The LAN9116-MT can serve the control plane of an embedded router or communications appliance that requires a reliable parallel-bus 10/100 Ethernet port. Its single-chip controller design supports both 10 Mbps and 100 Mbps operation and targets embedded processors needing moderate-to-high performance without excessive host overhead. Use the Microchip reference schematic to reproduce the required clock, reset, decoupling, magnetics, and connector arrangements. Firmware validation should cover link negotiation, flow-control behavior, packet throughput, and recovery after bus or cable faults.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LAN9116-MT — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LAN9117-MT | LAN9118-MT |
|---|---|---|---|
| Package | 100-pin TQFP, 14 x 20 mm | 100-pin TQFP comparison candidate | 100-pin TQFP comparison candidate |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Type | Single-chip 10/100 Ethernet controller | 10/100 Ethernet controller | Full-featured single-chip 10/100 Ethernet controller |
| Ethernet Speed | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
جیاکەرەوە سەرەکییەکان
- Integrated single-chip 10/100 networking function (بەراورد بەLAN9117-MT)
- Explicit support for 16-bit and 32-bit embedded processors (بەراورد بەLAN9118-MT)
- Established medium-to-high performance 32-bit target (بەراورد بەLAN9118-MT)
- Parallel, non-PCI integration model (بەراورد بەLAN9117-MT)
تێبینییەکانی دیزاین
Use the Microchip LAN9116 reference schematic and 100-pin TQFP placement checklist as the PCB baseline. Route the processor interface to its shortest practical connections and place the magnetics according to the manufacturer's recommended arrangement near the Ethernet physical-layer section. Preserve the placement of the clock circuitry, decoupling capacitors, reset components, and exposed board-return areas rather than substituting generic Ethernet layouts.
Confirm the processor bus voltage, timing, interrupt polarity, address mapping, and clock source against the exact host processor before layout release. The LAN9116-MT is identified as a 3.3 V, non-PCI, 16-bit or 32-bit parallel-interface controller, but those labels do not remove the need to verify every electrical edge and bus-cycle requirement in the manufacturer datasheet.
Do not treat LAN9117-MT or LAN9118-MT as automatic substitutions solely because they appear in family-comparison results. Verify all 100 pin assignments, host-bus timing, register compatibility, initialization sequence, clock requirements, PHY behavior, and package tolerances. Firmware may also require changes even if the PCB footprint appears compatible, so both hardware and software regression testing are necessary.
زانیاری پابەندبوون
The supplied manufacturer and distributor snippets do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These values remain unknown rather than being inferred.