LAN9253-I/R4X - 3-Port EtherCAT ESC | Microchip
MPN: LAN9253-I/R4X ✓ چالاکLAN9253-I/R4X گشتی
An EtherCAT slave controller is a specialized interface IC that connects an embedded control system to an EtherCAT real-time industrial Ethernet network. It processes EtherCAT frames, manages distributed device memories, synchronizes distributed clocks, and exchanges cyclic application data with a host processor. Within the product hierarchy, it is an EtherCAT device controller, a network interface controller, an interface IC, and a semiconductor.
The LAN9253 combines two integrated full-duplex 100BASE-TX transceivers with a flexible third-port arrangement. HP Auto-MDIX allows direct-connect or crossover Ethernet cables, reducing cabling constraints in industrial installations. The 8/16-bit host bus can connect to common embedded processors without external interface logic, while SPI, GPIO, and MII options broaden the supported hardware architectures and board configurations.
Eight Fieldbus Memory Management Units support partitioned process-data access, and eight SyncManagers provide dedicated channels for cyclic data, acknowledged transfers, interrupts, and mailbox communication. The controller includes power-up and reset configuration, wake-up support, interrupt generation, and non-volatile configuration storage, reducing the amount of external initialization required in an EtherCAT slave design.
Typical uses include servo and stepper motor drives, industrial I/O modules, PLC peripherals, robotics controllers, machine vision equipment, and distributed automation nodes. The integrated PHYs are particularly useful when board area or external PHY count is constrained, while the optional MII interface allows an external PHY to support the third network connection.
PCB implementation requires careful separation between Ethernet and digital interfaces, correct magnetic-component layout, solid power and ground planes, and decoupling close to the device. The manufacturer’s LAN9253 hardware design checklist should be used during schematic and layout review, especially for differential pairs, clock sources, reset sequencing, and connector-related isolation requirements.
This product overview consolidates the controller architecture, interface options, application guidance, practical hardware considerations, and qualified same-package alternatives. It also distinguishes the exact LAN9253-I/R4X ordering code from related LAN9253 variants so engineers can confirm temperature grade, package, and configuration before committing a PCB or production BOM.
جێگرەوەکانی جێگۆڕکێ بۆ LAN9253-I/R4X — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN9253-I/R4X (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Auto-MDIX, Integrated Ethernet PHYs, Package, Product Type.
LAN9253/R4X
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN9253-I/R4X تایبەتمەندییەکان
| Device Type | 2/3-port EtherCAT slave controller |
| Number of Ports | 3 ports |
| Integrated Ethernet PHYs | 2 PHYs |
| Ethernet Support | 100BASE-TX |
| Maximum Ethernet Data Rate | 100 Mbps |
| Ethernet Operating Mode | Full duplex |
| Auto-MDIX | HP Auto-MDIX supported |
| Host Processor Interface | 8/16-bit parallel host bus |
| Fieldbus Memory Management Units | 8 FMMUs |
| SyncManagers | 8 SyncManagers |
| Additional Interfaces | SPI, GPIO, and MII |
| Variable Supply Voltage | 1.8 V to 3.3 V |
| Internal Core Voltage | 1.14 V to 1.26 V |
| پاکێج | 64-QFN with exposed pad, 9 mm x 9 mm |
| جۆری دامەزراندن | Surface mount |
| Configuration Features | Power-up/reset configuration and non-volatile configuration storage |
| Power Management Features | Wake-up function |
| Interrupt Support | Interrupt generation |
| دۆخی RoHS | Compliant |
ڕێنمایی ڕێکخستنی پینی LAN9253-I/R4X 64-qfn with exposed pad, 9 mm x 9 mm
ڕێکخستنی پین بۆ LAN9253-I/R4X (پاکێجی 64-qfn with exposed pad, 9 mm x 9 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN9253-I/R4X.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LAN9253-I/R4X گونجاوە بۆ 6 بەکارھێنانs: Servo and Stepper Motor Drives, Distributed Industrial I/O Modules, Industrial Robotics Nodes, Machine Vision and Inspection Equipment, PLC and Automation Controller Cards, Power and Building Automation Gateways.
Servo and Stepper Motor Drives
The LAN9253-I/R4X fits EtherCAT servo and stepper drive modules that need cyclic command data, status reporting, and synchronized network communication. Its three-port controller supports two integrated 100BASE-TX connections plus an MII-capable third connection, allowing line and daisy-chain topologies without adding two external PHYs. Eight SyncManagers and eight FMMUs support separated process-data and mailbox workflows, while the 8/16-bit host bus, SPI, or GPIO interfaces accommodate the motion-control MCU. Validate the final EtherCAT state-machine timing and distributed-clock behavior in the chosen motor-control firmware.
پێشنیارکراو
Distributed Industrial I/O Modules
The LAN9253-I/R4X is suitable for distributed digital and analog I/O modules that exchange cyclic process data over EtherCAT. Eight Fieldbus Memory Management Units provide configurable memory partitions for channel data, and eight SyncManagers support coordinated real-time transfers and service communication. Dual integrated 100BASE-TX PHYs at 100 Mbps simplify dual-port module wiring, while HP Auto-MDIX supports direct or crossover cable connections. Select the host interface and power architecture during schematic review so the controller remains synchronized with the module’s acquisition and output-update timing.
پێشنیارکراو
Industrial Robotics Nodes
The LAN9253-I/R4X supports EtherCAT robot nodes that coordinate axis commands, sensor data, and safety-related status information over a deterministic network. Its three-port architecture permits line topology through the two integrated PHYs and offers an MII path for additional connectivity. The 8/16-bit host interface supports embedded processors with modest bus bandwidth, while SPI and GPIO provide alternatives for compact controller designs. Use EtherCAT distributed clocks and the manufacturer’s synchronization guidance to align motion events across multiple robotic subsystems.
پێشنیارکراو
Machine Vision and Inspection Equipment
The LAN9253-I/R4X can connect vision and inspection equipment to an EtherCAT network while transferring synchronized trigger and result data. The controller provides eight FMMUs and eight SyncManagers for separating cyclic image-processing metadata from configuration or diagnostic channels. Two integrated 100BASE-TX PHYs support daisy-chained network ports, while the third MII-capable path can connect an additional Ethernet interface. The host bus should be sized against the vision processor’s timing needs, and the Ethernet magnetics and differential routing should follow the manufacturer hardware checklist.
پێشنیارکراو
PLC and Automation Controller Cards
The LAN9253-I/R4X is appropriate for add-in EtherCAT controller cards used in PLCs and industrial automation platforms. Its 8/16-bit host interface allows connection to embedded control logic without requiring a separate Ethernet MAC or dual external PHYs, while SPI and GPIO options support compact card designs. Eight FMMUs and eight SyncManagers enable segmented cyclic and mailbox data exchange. The third port can use MII when a board requires additional Ethernet connectivity beyond the two integrated 100BASE-TX PHYs.
پێشنیارکراو
Power and Building Automation Gateways
The LAN9253-I/R4X can serve as the EtherCAT interface in building automation, power-distribution, and facility-control gateway equipment. Two integrated 100BASE-TX PHYs permit line-style network connectivity at 100 Mbps, while the third port and MII interface provide expansion flexibility. Its wake-up function, interrupt generation, power-up/reset configuration, and non-volatile configuration storage help simplify persistent gateway behavior. For long-lived industrial installations, verify the exact temperature grade and plan network isolation, Ethernet protection, and restart behavior around power disturbances.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LAN9253-I/R4X — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LAN9253/R4X |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 64-QFN with exposed pad, 9 mm x 9 mm | 64-QFN with exposed pad, 9 mm x 9 mm |
| EtherCAT Port Count | 3 ports | 3 ports |
| Integrated Ethernet PHYs | 2 PHYs | 2 PHYs |
| Ethernet Data Rate | 100 Mbps | 100 Mbps |
| Ethernet Support | 100BASE-TX | 100BASE-TX |
| Host Interface | 8/16-bit host bus, SPI, GPIO, and MII | 8/16-bit host bus, SPI, GPIO, and MII |
| FMMU Count | 8 FMMUs | 8 FMMUs |
| SyncManager Count | 8 SyncManagers | 8 SyncManagers |
| Variable Supply Voltage | 1.8 V to 3.3 V | 1.8 V to 3.3 V |
| Temperature-Grade Suffix | Includes -I suffix | No -I suffix |
| Auto-MDIX | HP Auto-MDIX | HP Auto-MDIX |
جیاکەرەوە سەرەکییەکان
- Closest identified same-package option retains the complete controller architecture (بەراورد بەLAN9253/R4X)
- Integrated dual-PHY design reduces external Ethernet transceiver count (بەراورد بەLAN9253/R4X)
- Third-port flexibility supports expanded network topologies (بەراورد بەLAN9253/R4X)
تێبینییەکانی دیزاین
Implement the Ethernet side as controlled-impedance differential routing with a continuous reference plane and minimal layer transitions. Follow the manufacturer’s LAN9253 Hardware Design Checklist for the placement of the integrated PHY circuitry, magnetic components, and network connector. Keep the Ethernet differential pairs away from switching nodes, high-current inductors, and crystal-clock circuitry, and confirm that the selected PCB stack-up preserves the required trace geometry.
Place the controller’s decoupling capacitors close to their associated supply pins and provide low-impedance connections to the ground and power planes. Separate noisy digital and switching-supply return paths from sensitive Ethernet and clock references where the layout permits. Verify startup sequencing, reset release, and the 1.8 V to 3.3 V variable operating range against the complete power tree rather than testing the LAN9253-I/R4X in isolation.
Use the manufacturer package drawing to create the 64-QFN footprint, including its exposed thermal pad, and cross-check pad dimensions against the PCB assembler’s capabilities. Review the pin-description table for every terminal before routing. The controller also supports configuration straps, so their static levels must remain compatible with the intended EtherCAT operating mode, reset behavior, and third-port arrangement.
Do not treat LAN9252 as a pin-for-pin substitute for LAN9253. Microchip application note AN3621 documents pin differences, configuration-strap changes, and register differences between those families. Likewise, confirm the exact temperature-grade suffix when substituting LAN9253/R4X. A matching package outline is insufficient if the operating-temperature requirement, strap level, or electrical function differs.
زانیاری پابەندبوون
The LAN9253-I/R4X is identified as RoHS-compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for the exact ordering code.