LAN9311-NZW - 2-Port 10/100 Ethernet Switch | Microchip
MPN: LAN9311-NZW ✓ چالاکLAN9311-NZW گشتی
An Ethernet switch is a networking semiconductor that connects multiple Ethernet endpoints through one integrated switching fabric. Within the embedded-device hierarchy, the LAN9311-NZW belongs to the Ethernet interface controller family, combining interface IC functionality with a two-port 10/100 switch. This integration can reduce the number of separate Ethernet components required in compact industrial, communications, and embedded control equipment.
The principal device features include two 10/100 Ethernet switch ports, an I2C management interface, integrated MAC functionality, and a 128-terminal square TQFP package. The 14 mm by 14 mm package provides a defined PCB footprint for embedded Ethernet designs. Because the switch supports both 10 Mbps and 100 Mbps operation, it can connect equipment using Fast Ethernet while providing a managed-network interface for configuration and control.
The LAN9311 family is designed for embedded applications where performance, flexibility, ease of integration, and system cost control are important. Integrating the switch and controller functions can shorten the connection between an embedded processor and its Ethernet ports. The I2C interface also gives a host processor a compact management path, allowing software to access switch functions without dedicating a separate parallel management bus.
Typical applications include industrial control systems, embedded gateways, communications equipment, instrumentation, and connected control products. The two-port architecture fits designs that need local Ethernet connectivity for a host processor and one external network port. Product designs should also account for magnetic isolation, connector selection, clocking, and the reference-design filtering and decoupling requirements associated with Ethernet magnetics and high-speed signals.
The LAN9311-NZW uses the 128-XVTQFP package and is supplied in a commercial-grade configuration identified by the NZW suffix. Use the manufacturer datasheet and the LAN9311 reference-design schematic when assigning every power, clock, transceiver, and signal-integrity connection. Follow the recommended capacitor placement and low-ESR requirements shown in the reference design to preserve Ethernet performance and power stability.
جێگرەوەکانی جێگۆڕکێ بۆ LAN9311-NZW — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN9311-NZW (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Host Interface, Package, Product Type.
LAN9311I-NZW
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN9311-NZW زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 2-port managed 10/100 Ethernet switch |
| Number of Ethernet Ports | 2 ports |
| Supported Ethernet Speed | 10 Mbps and 100 Mbps |
| Management Interface | I2C |
| Integrated Controller Function | Integrated MACs |
| پاکێج | 128-XVTQFP |
| Package Body Size | 14 mm x 14 mm |
| Number of Terminals | 128 terminals |
| Package Code | HTFQFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Temperature Grade | Commercial |
| Manufacturer | Microchip Technology |
ڕێنمایی ڕێکخستنی پینی LAN9311-NZW square
ڕێکخستنی پین بۆ LAN9311-NZW (پاکێجی square). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN9311-NZW.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LAN9311-NZW گونجاوە بۆ 6 بەکارھێنانs: Embedded Industrial Control Gateway, Embedded Network Interface Module, Industrial Instrumentation Controller, Connected Communications Equipment, IoT Edge Device, Networked Test and Measurement Product.
Embedded Industrial Control Gateway
The LAN9311-NZW fits an embedded industrial gateway that must connect a local controller to an external 10/100 Ethernet network. Its two-port 10/100 switch provides a compact path between a host processor and a networked peripheral, while the I2C management interface lets embedded software control switch functions without a separate parallel management bus. The 128-XVTQFP package consolidates Ethernet switching and integrated MAC functionality into one device. In a rugged enclosure, follow the reference-design capacitor placement and preserve controlled Ethernet impedances. Verify the commercial operating-temperature range, isolation strategy, and surge-protection requirements for the installation environment.
پێشنیارکراو
Embedded Network Interface Module
The LAN9311-NZW is appropriate for a compact embedded network interface module that gives a host processor access to two 10/100 Ethernet connections. Integrating the switch and controller functions can reduce board area compared with a discrete switch and PHY arrangement, while I2C management supports configuration from a low-pin-count embedded processor. The device's 128-XVTQFP package is 14 mm by 14 mm, allowing a functional network subsystem to fit into compact equipment. Design the PCB around the manufacturer reference-design filtering and decoupling positions, and validate transmission performance with the intended magnetics and connector configuration.
پێشنیارکراو
Industrial Instrumentation Controller
The LAN9311-NZW can support instrumentation that must exchange measurement and control data over Fast Ethernet. Two 10/100 ports allow an instrument to connect a local service interface with an upstream controller or gateway, and the managed I2C interface allows the main controller to configure switch behavior. This is useful where space and component count matter but Gigabit Ethernet is unnecessary. Keep copper routing away from noisy power stages, follow the reference-design capacitor placements, and select magnetic and connector hardware that support the Ethernet application's isolation and environmental requirements.
پێشنیارکراو
Connected Communications Equipment
The LAN9311-NZW suits embedded communications equipment requiring two Fast Ethernet paths and a compact processor-facing management interface. One port can connect the equipment internally while the other provides an uplink, or both can be used for bridging embedded subsystems. Its 10 Mbps and 100 Mbps support covers Fast Ethernet equipment, and the integrated controller architecture can simplify the hardware design. Confirm host-processor clocking and I2C addressing, implement the reference-design filtering and power connections, and verify frame-performance and environmental requirements for the deployed network.
پێشنیارکراو
IoT Edge Device
The LAN9311-NZW is useful in a compact IoT edge device that needs wired Fast Ethernet alongside local control logic. The two-port arrangement can connect a system-on-chip to an external network, while I2C management reduces the number of host-controller pins required for switch control. Its integrated MAC and switch functions can shorten the design cycle compared with assembling a separate controller and PHY. Use careful layer-stackup and impedance control for the Ethernet nets, preserve the reference-design power and capacitor placement, and check the commercial temperature grade against the device's intended enclosure conditions.
پێشنیارکراو
Networked Test and Measurement Product
The LAN9311-NZW can add two managed 10/100 network connections to compact test and measurement equipment. One port may serve an instrument control link while the other connects to a laboratory network, and the I2C interface allows the instrument controller to access switch functions. The switch speeds support legacy Fast Ethernet test systems and embedded service interfaces. Validate signal integrity under the enclosure and cable environment, follow the manufacturer filtering and decoupling layout, and confirm that the commercial temperature grade covers the equipment's ambient and internal temperature range.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LAN9311-NZW — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LAN9311I-NZW |
|---|---|---|
| Package | 128-XVTQFP (14 mm x 14 mm) | 128-XVTQFP (14 mm x 14 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Ethernet Port Count | 2 ports | 2 ports |
| Supported Speed | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Number of Terminals | 128 terminals | 128 terminals |
جیاکەرەوە سەرەکییەکان
- Combines two Fast Ethernet ports and controller functionality in one package (بەراورد بەLAN9311I-NZW)
- Compact 14 mm square integration (بەراورد بەLAN9311I-NZW)
- Processor-friendly management path (بەراورد بەLAN9311I-NZW)
تێبینییەکانی دیزاین
Use the LAN9311 reference-design schematic to place the required bulk capacitors at the designated device pins. The reference design identifies connections at pins 120, 93, 74, 117, 125, 121, and 107 and specifically marks low-ESR-only capacitor locations. Keep these components close to their associated pins and follow the reference layout for the 3.3 V network. Deviations should be evaluated for loop area, supply impedance, and Ethernet signal coupling.
Route 10/100 Ethernet differential pairs as controlled-impedance traces with continuous reference planes, minimal stubs, and avoidance of right-angle transitions. Keep switch clocks and high-speed nets away from noisy switching-regulator paths and noisy digital signals. Preserve the separation between Ethernet interfaces and external circuitry, and review connector, magnetics, and chassis-ground arrangements to reduce radiated emissions and susceptibility to industrial electromagnetic interference.
Do not treat LAN9311, LAN9311i, and similarly named LAN930x devices as automatic substitutes. The LAN9311I-NZW must be checked pin by pin and feature by feature against LAN9311-NZW before a drop-in change is approved. In particular, verify management behavior, clock requirements, transceiver connections, power rails, enable sequencing, and exposed-pad requirements. PCB footprint similarity alone does not establish functional or pin-to-pin compatibility.
Plan the LAN9311 power distribution around the manufacturer reference-design network rather than adding generic bulk capacitance arbitrarily. Place bypass components close to the relevant device pins, preserve low-ESR recommendations, and verify that the selected supply architecture supports all internal rails and startup sequencing. Ethernet equipment can combine sensitive digital functions with magnetics and external interfaces, so measure supply ripple and conducted emissions after the complete board is assembled.
زانیاری پابەندبوون
The LAN9311-NZW is identified as a commercial-grade component. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the manufacturer product-page snippet and remain to be confirmed from the exact ordering-code documentation.