LAN9352I/ML - 2-Port 10/100 Ethernet Switch | Microchip
MPN: LAN9352I/ML ✓ چالاکLAN9352I/ML گشتی
A managed Ethernet switch is an Ethernet interface IC that connects multiple copper-network nodes while supporting traffic control, configuration, status monitoring, and host access. Within the product hierarchy, the LAN9352I/ML belongs to the managed switch class, connects to Ethernet physical-layer transceivers through integrated PHYs, and serves as a network interface within an embedded system or industrial control product.
The device provides two 10/100 Ethernet ports, an 8-bit or 16-bit non-PCI CPU interface, and support for I2C or SPI host communication. These resources allow an embedded processor to initialize the switch, monitor port activity, and implement network-control functions without requiring a separate discrete Ethernet switch and management interface. The industrial-oriented I/ML ordering variant is identified by Microchip as the LAN9352i option.
The switch integrates the digital MAC, switch fabric, and 10/100 Base-T/TX physical-layer functions needed for a compact dual-port network node. Its managed architecture makes it more capable than a basic unmanaged PHY while avoiding the footprint of a larger multi-port switch implementation. The compact 72-QFN package also supports dense industrial, consumer, and embedded-equipment layouts when board area and routing continuity are important.
Typical applications include industrial control systems, embedded instrumentation, consumer appliances, communications equipment, and compact network interfaces connected to a host processor through I2C or SPI. A two-port arrangement can support equipment-to-equipment links, a service connection combined with an internal network link, or a bridged connection between two Fast Ethernet networks.
PCB implementation requires careful attention to the exposed-pad thermal path, Ethernet magnetics or integrated magnetics, clock and crystal requirements, and the manufacturer-specified magnetic components and termination network. Preserve the recommended high-speed trace geometry and isolate analog clock and PHY routing from switching or processor signals where the layout guidance calls for it.
This product resource consolidates the confirmed LAN9352I/ML capabilities, pin-compatible family considerations, interface comparisons, application guidance, and PCB design notes into an engineering-focused reference for Ethernet switch implementation.
جێگرەوەکانی جێگۆڕکێ بۆ LAN9352I/ML — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN9352I/ML (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Ethernet Standard, Package.
LAN9352/ML
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN9352I/ML زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 2-Port Managed Ethernet Switch |
| Number of Ethernet Ports | 2 ports |
| Supported Ethernet Data Rates | 10/100 Mb/s |
| Ethernet Standard | 10/100 Base-T/TX |
| Integrated PHY Count | 2 integrated 10/100 Base-T/TX PHYs |
| Host Interface | I2C or SPI |
| CPU Interface Width | 8-bit or 16-bit non-PCI |
| پاکێج | 72-QFN (10 mm x 10 mm) |
| جۆری دامەزراندن | Surface Mount |
| Target Markets | Consumer, embedded, and industrial |
| Management Features | Managed Ethernet switch |
ڕێنمایی ڕێکخستنی پینی LAN9352I/ML 72-qfn (10 mm x 10 mm)
ڕێکخستنی پین بۆ LAN9352I/ML (پاکێجی 72-qfn (10 mm x 10 mm)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN9352I/ML.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LAN9352I/ML گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Gateway, Embedded Instrumentation, Consumer Network Appliance, Serial-to-Ethernet Equipment Bridge, Communication Equipment, Two-Port Network Bridge.
Industrial Control Gateway
The LAN9352I/ML fits industrial control gateways that need two managed Fast Ethernet connections without allocating a separate switch ASIC. Its two integrated 10/100 Base-T/TX PHYs support equipment-to-network and equipment-to-equipment links, while the I2C-or-SPI host interface lets an embedded controller configure switching behavior and monitor port status. The 72-QFN package measures 10 mm by 10 mm, which helps preserve board area in compact control assemblies. Design the Ethernet section around the manufacturer-recommended magnetic components, differential impedance, isolation spacing, and exposed-pad thermal layout.
پێشنیارکراو
Embedded Instrumentation
The LAN9352I/ML supports measurement instruments that must connect a host processor to one or two Fast Ethernet networks. The managed switch architecture is useful when the instrument needs status monitoring, controlled frame handling, or host access to switch registers. Two 10/100 Base-T/TX ports can bridge an internal equipment network to an external service network, while the 8-bit or 16-bit non-PCI host interface fits microcontrollers and embedded processors. Placement of the 72-QFN device should prioritize short PHY paths to magnetics and a low-impedance thermal connection under its exposed pad.
پێشنیارکراو
Consumer Network Appliance
The LAN9352I/ML provides a compact dual-port Ethernet node for consumer appliances and connected equipment requiring managed Layer 2 connectivity. Both ports operate at 10/100 Mb/s and use Base-T/TX copper interfaces, allowing internal module traffic and an external uplink to share the same switching silicon. The I2C-or-SPI host interface offers flexible processor connectivity without a PCI bus, while the 72-QFN surface-mount package supports automated assembly. Follow the manufacturer's magnetics, isolation, and high-speed routing guidance to preserve Ethernet performance and regulatory compliance.
پێشنیارکراو
Serial-to-Ethernet Equipment Bridge
The LAN9352I/ML can serve as the Ethernet switching element in equipment that converts between a host processor and one or two network segments. The processor uses the I2C or SPI interface to initialize the device and supervise network activity, while the two integrated PHYs provide copper links to upstream and downstream equipment. This arrangement is useful in data loggers, remote controllers, and small automation gateways. The 10 mm by 10 mm QFN package reduces routing congestion, but Ethernet traces still require controlled impedance, suitable spacing, and manufacturer-approved magnetic networks.
پێشنیارکراو
Communication Equipment
The LAN9352I/ML is appropriate for compact communication equipment requiring two managed 10/100 Base-T/TX ports and a processor-controlled switch. A host processor can use the 8-bit or 16-bit non-PCI interface for initialization, interrupt handling, and operational monitoring, while two copper ports support network extension or equipment interconnection. This architecture is suitable for small protocol converters, access modules, and communication controllers. The industrial-oriented ordering grade is relevant when the product operates in a temperature-controlled enclosure with variable ambient conditions.
پێشنیارکراو
Two-Port Network Bridge
The LAN9352I/ML can implement a compact two-port managed bridge when an embedded system needs a controlled connection between two Fast Ethernet segments. Both ports use 10/100 Base-T/TX, and host access through I2C or SPI allows a processor to configure switch parameters and monitor link or port conditions. The integrated design lowers the component count compared with separate PHY arrangements in space-constrained systems. For dependable operation, follow the manufacturer layout for differential traces, magnetics, clock circuitry, grounding, and the thermal pad beneath the 72-QFN package.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LAN9352I/ML — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LAN9352/ML |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 72-QFN (10 mm x 10 mm) | 72-QFN (10 mm x 10 mm), ML package designation |
| Product Type | 2-Port Managed Ethernet Switch | 2-Port Managed Ethernet Switch |
| Ethernet Port Count | 2 ports | 2 ports |
| Supported Data Rates | 10/100 Mb/s | 10/100 Mb/s |
| Ethernet Physical Layer | 10/100 Base-T/TX | 10/100 Base-T/TX |
| Host Interface | I2C or SPI | I2C or SPI |
| CPU Interface Width | 8-bit or 16-bit non-PCI | 8-bit or 16-bit non-PCI |
| Device Grade | LAN9352i industrial ordering variant | LAN9352 ordering variant |
| Application Markets | Consumer, embedded, and industrial | Consumer, embedded, and industrial |
جیاکەرەوە سەرەکییەکان
- Industrial-oriented device grade within the LAN9352 family (بەراورد بەLAN9352/ML)
- Integrated dual-port Ethernet connectivity (بەراورد بەLAN9352/ML)
- Flexible processor connectivity without PCI (بەراورد بەLAN9352/ML)
تێبینییەکانی دیزاین
Route each 10/100 Base-T/TX differential pair as a controlled-impedance, continuously referenced connection between the LAN9352I/ML and the manufacturer-approved magnetic component. Keep the Ethernet traces short, avoid stubs and test pads where possible, and follow the datasheet's recommended spacing and via guidance. Route clock, reset, and host-interface signals away from the differential Ethernet pairs, and use a continuous ground reference beneath the routing region.
The 72-QFN package requires a sound thermal path through its exposed pad. Follow the manufacturer's recommended pad pattern, place vias near or within the thermal region where specified, and provide uninterrupted ground-plane copper beneath the device. Validate the final assembly under the highest expected ambient temperature and Ethernet traffic. Use the package thermal information and PCB stack-up from the LAN9352 datasheet when estimating junction temperature.
Decouple each LAN9352I/ML supply rail at the package pins with the capacitance and placement specified by the manufacturer. Keep the high-frequency return path compact and connect supply and ground planes with multiple nearby vias to limit loop inductance. Separate noisy switching-converter paths from the Ethernet and clock sections, and verify startup sequencing, reset behavior, and supply tolerances across temperature before releasing the product to production.
Do not treat a same-family ordering suffix as automatically interchangeable. Confirm the complete ordering table, temperature limits, package dimensions, exposed-pad connection, and host-interface configuration for LAN9352I/ML or its replacement. Also verify the required magnetic components and whether the selected board uses integrated magnetics; changing this network can affect Ethernet performance, isolation, compliance, and the mechanical placement of the switch.
زانیاری پابەندبوون
Consult the current Microchip product declaration and LAN9352 documentation for material-composition, environmental, and automotive qualification details before final product approval.