LAN9352T/ML - 2-Port 10/100 Managed Ethernet Switch | Microchip
MPN: LAN9352T/ML ✓ چالاکLAN9352T/ML گشتی
A managed Ethernet switch is a network-semiconductor device that coordinates traffic between multiple physical Ethernet ports while providing register-level control over functions such as port configuration, addressing, and traffic handling. In the product hierarchy, the LAN9352 belongs to Ethernet controllers, interface ICs, and integrated circuits. Its managed architecture is intended for applications that need deterministic two-port connectivity without using a separate external switch controller for each port.
The principal interface features include two 10/100 Base-T/TX ports, I2C and SPI host connectivity, and a non-PCI 8/16-bit CPU interface. According to the Microchip LAN9352 product page, the LAN9352 and LAN9352i family is optimized for cost-effective consumer, embedded, and industrial designs. The /ML ordering option is supplied in tape-and-reel packaging with a standard quantity of 3000 units.
The LAN9352T/ML consolidates two Ethernet PHYs, a managed switching block, and an embedded host interface in one package. This integration can reduce the component count and board area associated with a two-port Ethernet design. The 16-bit non-PCI interface supports processor or microcontroller connectivity without requiring a PCI bus, while the I2C option provides an additional configuration path for suitable embedded systems.
Typical uses include industrial Ethernet equipment, embedded controllers, factory automation modules, printer and scanner subsystems, IP-based access hardware, and compact communication gateways. In these systems, two integrated ports can connect a controller to both an upstream network and a downstream device, or provide direct copper links to two external modules. The 10/100 Base-T/TX capability is suited to legacy Fast Ethernet infrastructure and cost-sensitive industrial networks.
The main design consideration is layout-sensitive integration of two high-speed copper PHYs on a dense 10 mm by 10 mm surface-mount footprint. Differential pair routing, solid reference planes, controlled via geometry, isolation from noisy circuitry, and correct magnetics or cable-side implementation are essential for reliable link performance. Follow the manufacturer reference design and pin-description table when assigning PCB nets and placing the Ethernet magnetics.
This page combines the verified Microchip product information with practical design guidance, application analysis, and drop-in replacement context. It is intended to help engineers evaluate the LAN9352T/ML for embedded networking projects, compare it with related managed-switch options, and plan a compliant PCB implementation before releasing a design to production.
جێگرەوەکانی جێگۆڕکێ بۆ LAN9352T/ML — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN9352T/ML (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Ethernet Speed, Ethernet Standards, Host Interface.
LAN9353T/ML
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN9353T/PT
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN9355TI/ML
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN9352T/ML زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | 2-Port 10/100 Managed Ethernet Switch |
| Number of Ethernet Ports | 2 ports |
| Ethernet Speed | 10/100 Base-T/TX |
| Host Interface | 8/16-bit non-PCI CPU interface |
| SPI/SQI Interface | 16-bit non-PCI SPI/SQI |
| I2C Interface | I2C |
| Integrated PHYs | 2 integrated 10/100 Base-T/TX PHYs |
| Lead Count | 72 leads |
| Package Type | VQFN |
| Package Dimensions | 10 mm x 10 mm |
| جۆری دامەزراندن | Surface Mount |
| Packing Media | Tape and reel |
| Standard Packing Quantity | 3000 units |
| Country of Origin | Taiwan |
| Maximum Ethernet Data Rate | 100 Mbps per port |
ڕێنمایی ڕێکخستنی پینی LAN9352T/ML 10 mm x 10 mm
ڕێکخستنی پین بۆ LAN9352T/ML (پاکێجی 10 mm x 10 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN9352T/ML.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LAN9352T/ML گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation Terminals, Embedded Network Gateways, IP Camera and Video Sensor Interfaces, Printers and Scanners, Factory Sensor Hubs, Access Control and Security Equipment.
Industrial Automation Terminals
The LAN9352T/ML fits factory-floor terminals that need two Fast Ethernet connections in a compact embedded controller. One port can connect to a plant network while the other links to a local sensor or service interface, using the managed switching function to keep traffic handling under host supervision. The 72-lead 10 mm by 10 mm VQFN package limits board area, and the I2C or 16-bit non-PCI SPI/SQI interface lets an embedded processor configure switching registers without a PCI bus. Layout the two copper differential pairs against a continuous ground plane and follow the Microchip reference design for magnetics, filtering, and isolation.
پێشنیارکراو
Embedded Network Gateways
Gateway products often require an upstream network link and a downstream management connection, making the LAN9352T/ML's two integrated 10/100 ports practical. The switch can bridge data between the processor-facing network and a local Ethernet segment while the host accesses configuration through SPI/SQI or I2C. Its compact VQFN footprint supports space-constrained embedded designs without external switch chips for each port. The design trade-off is that 100 Mbps per port limits throughput compared with Gigabit Ethernet alternatives, so high-volume file transfers or backbone uplinks may require a faster transceiver.
پێشنیارکراو
IP Camera and Video Sensor Interfaces
The LAN9352T/ML can support a compact camera or imaging peripheral that needs one port to a network and another to a local processing or test node. Two integrated 10/100 Base-T/TX PHYs reduce the need for separate Ethernet interface devices, while the host interface permits register-based configuration of the managed switch. The 10/100 Mbps ceiling is acceptable for control traffic and moderate-resolution sensor output but may constrain multi-stream video. Use the manufacturer's reference layout for the differential pairs, and confirm connector-side magnetics and surge protection to protect the compact QFN device.
پێشنیارکراو
Printers and Scanners
Printers, scanners, and multifunction peripherals can use the LAN9352T/ML to combine an upstream Ethernet connection with a second internal or service link. The managed two-port architecture is useful when the copier subsystem needs a local exchange path in addition to the main network port. The device's non-PCI SPI/SQI interface is appropriate for an embedded control engine and avoids a conventional PCI bus in a cost-sensitive system. Because these products often contain noisy motors, heaters, and power converters, place the LAN9352 away from switching loops and follow the reference design's grounding and filtering layout.
پێشنیارکراو
Factory Sensor Hubs
A sensor hub can use the LAN9352T/ML to consolidate two Fast Ethernet links while a microcontroller manages port configuration through I2C or SPI/SQI. This is useful where individual sensors or controller nodes need copper Ethernet links and the hub must remain physically compact. The two 100 Mbps ports provide predictable capacity for industrial control traffic rather than high-bandwidth data aggregation. Keep the Ethernet traces short, provide adequate ground-plane continuity under the VQFN, and isolate the hub from motor and relay switching stages that could couple noise into the PHYs.
پێشنیارکراو
Access Control and Security Equipment
Access-control readers and security controllers often need Ethernet for a backend network plus a local connection to a companion reader or service console. The LAN9352T/ML consolidates those two links into one managed 72-lead VQFN device and supports host access through SPI/SQI or I2C. Its Fast Ethernet capability is well matched to credential, event, and management traffic, while a Gigabit interface may be unnecessary for a single reader. Use the manufacturer's Ethernet implementation guidance to establish cable-side protection, keep switching regulators away from PHY circuitry, and validate the completed board for electromagnetic compliance.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LAN9352T/ML — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LAN9353T/ML | LAN9353T/PT | LAN9355TI/ML |
|---|---|---|---|---|
| Package | VQFN-72 (10 mm x 10 mm) | VQFN-72 (10 mm x 10 mm) | VQFN-72 (10 mm x 10 mm) | VQFN-72 (10 mm x 10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Port Count | 2 ports | 2 ports | 2 ports | 2 ports |
| Ethernet Speed | 10/100 Base-T/TX | 10/100 Base-T/TX | 10/100 Base-T/TX | 10/100 Base-T/TX |
| Switch Function | Managed Ethernet switch | Managed Ethernet switch | Managed Ethernet switch | Managed Ethernet switch |
| Lead Count | 72 leads | 72 leads | 72 leads | 72 leads |
| Maximum Data Rate | 100 Mbps per port | 100 Mbps per port | 100 Mbps per port | 100 Mbps per port |
| Programmability | Programmable | Programmable | Programmable | Programmable |
جیاکەرەوە سەرەکییەکان
- Broader host connectivity than the I2C-focused comparison part (بەراورد بەLAN9355TI/ML)
- Direct 16-bit non-PCI host interface (بەراورد بەLAN9353T/ML)
- Compact integration of two PHYs and managed switching (بەراورد بەKSZ8041RNL)
- Established 3000-piece tape-and-reel format (بەراورد بەLAN9355TI/ML)
تێبینییەکانی دیزاین
Implement both 10/100 Base-T/TX ports from the manufacturer reference design, including differential-pair geometry, continuous ground references, via placement, and the locations of magnetics and protection components. The 72-lead VQFN leaves little room for routing corrections, so freeze the stack-up and impedance requirements before layout. Keep the two port areas separated where the reference design specifies, and avoid placing switching converters, inductors, or high-current return paths beneath the PHY section.
Follow the manufacturer power-decoupling and exposed-pad connection instructions exactly when supplying the LAN9352T/ML. Place the required bypass capacitors close to their specified pins and connect the exposed pad to the recommended ground plane rather than treating it as an optional thermal feature. Use the datasheet for voltage tolerances and sequencing. Estimated: thermal performance depends strongly on the completed board's copper area and layer stack, so junction-temperature margins should be evaluated with the actual PCB rather than a package-only assumption.
Do not assume that any 72-lead VQFN Ethernet switch is pin-compatible. Compare the manufacturer pin-description tables, exposed-pad connection, supply rails, host interface, clocking, reset behavior, and PHY-specific functions before reusing a PCB. In particular, LAN9355TI/ML is published with I2C connectivity, while the LAN9352T/ML supports SPI/SQI as well. Also verify register-map and initialization-driver changes in firmware when moving between related family members.
Ethernet PHY circuits can be sensitive to radiated and conducted emissions from nearby power converters and digital interfaces. Keep magnetics and protection parts near the cable connector, maintain the specified isolation distance, and provide clean ground returns for PHY and magnetics. Validate compliance on the final product because enclosure, cable, and power-supply design materially affect emissions margin. Avoid stitching the cable shield into signal ground unless the reference design explicitly requires that connection.
زانیاری پابەندبوون
The verified product information identifies the package, packing media, quantity, and origin but does not state RoHS, REACH, AEC-Q100, halogen-free, lead-free, or conflict-minerals status. Confirm the current declarations and material documentation with Microchip before releasing an automotive or regulated design.