Microchip Technology

LAN9353/ML - 3-Port 10/100 Managed Ethernet Switch | Microchip

MPN: LAN9353/ML ✓ چالاک
1.8 V to 3.3 V Vdss 64-QFN (9 x 9 mm) with exposed pad Package 10 Mbps / 100 Mbps per port Speed
MOQ: 1 |

LAN9353/ML گشتی

The Microchip Technology LAN9353/ML is a fully integrated 3-port 10/100 managed Ethernet switch controller in a 64-pin QFN (9 x 9 mm) package with exposed pad. It provides three integrated 10/100BASE-T/TX PHYs, a switch fabric with per-port QoS, VLAN tagging and rate limiting, and an I2C/SMBus host interface for host-driven configuration. According to the Microchip LAN9353 datasheet (00001925A), the device supports interfaces at up to 200 Mbps via Turbo MII and runs from a 1.8 V to 3.3 V core supply.

An Ethernet switch IC is a semiconductor that combines multiple Ethernet physical layer (PHY) transceivers with a frame-processing fabric in one package. A "managed" switch adds register-programmable features - VLAN tags, priority queues, traffic classifiers, port-based rate limits and loop/ingress filtering - that an unmanaged switch cannot offer. The LAN9353 sits in the hierarchy: Ethernet switch controller -> Ethernet interface IC -> network interface controller -> integrated circuit.

Key features include three integrated 10/100 PHYs, full Auto-Negotiation with HP Auto-MDIX on every port, deterministic store-and-forward switching with 16 Kbyte frame buffers, and a host-accessible register set over I2C/SMBus for static and dynamic VLAN, QoS and port configuration. The switch fabric operates at 200 Mbps per port through Turbo MII for host or microcontroller connectivity.

Internally the LAN9353 pairs a RISC-based switch core with three integrated 10/100BASE-T PHYs, and it targets cost-sensitive embedded designs where a discrete PHY plus external switch would add board area, cost and design effort. Integration reduces the number of magnetics, RJ-45 magnetics remain external, but the PHY analog, digital interfaces and management registers are consolidated on one die.

Typical applications include embedded Linux and RTOS gateways, industrial and building automation controllers, consumer set-top and smart-home hubs, USB-to-Ethernet adapters, print servers and networked embedded instrumentation, where three copper ports plus host-managed configuration are required in a single 9 x 9 mm footprint.

When designing with the LAN9353/ML, budget careful attention to the exposed thermal pad, the 1.8 V to 3.3 V supply sequencing and the I2C pull-up network. Because it is a managed switch, firmware or a host microcontroller must configure VLAN and QoS tables, or the device runs with its power-on defaults.

This page consolidates distributor pricing, package and pin information, verified drop-in alternatives, and practical integration notes that are not presented together in the manufacturer datasheet.

جێگرەوەکانی جێگۆڕکێ بۆ LAN9353/ML — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN9353/ML (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Number of Ports, Package, Ethernet Speed, Host Interface, Operating Temperature.

Microchip Technology
Number of Ports: 2
Package: 72-QFN (10x10 mm) with exposed pad
Operating Temperature: 0C to +70C (commercial)
Microchip Technology
Number of Ports: 3
Package: 64-TQFP-EP, 10x10 mm
Ethernet Speed: 10/100 Mbps
Microchip Technology
Number of Ports: 3 ports
Package: 64-QFN (9 mm x 9 mm)
Ethernet Speed: 10/100 Base-TX

LAN9353I/ML

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 64-QFN (9 x 9 mm) exposed pad
Managed Ethernet switch · 3 ports · 10/100 Base-TX · Yes · MII, RMII, Turbo MII, and dual RMII · I2C · Supported · IEEE 1588

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LAN9353i/ML

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 64-QFN (9 x 9 mm) exposed pad
Temperature-grade ordering suffix variant of the same LAN9353 die in the same 64-QFN exposed-pad package; electrical ratings unchanged (0% deviation), only the temperature/order suffix differs

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LAN9353/PT

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 64-QFN (9 x 9 mm) exposed pad
3-Port 10/100 Managed Ethernet Switch · 3 · 10/100 Mbps · 3 integrated 10/100 PHYs · 3 integrated MACs · Dual RMII or single MII/RMII/Turbo MII · SPI, I2C, SMI · IEEE 802.1Q, 16 VLAN groups

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LAN9353/ML زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Device Type 3-Port 10/100 Managed Ethernet Switch Controller with Integrated PHYs
Number of Ports 3 x 10/100BASE-T/TX
Host Interface I2C / SMBus
MII Interface Turbo MII up to 200 Mbps
Supply Voltage Range 1.8 V to 3.3 V
پاکێج 64-QFN (9 x 9 mm) with exposed pad
جۆری دامەزراندن Surface Mount
پلەی گەرمیی کارکردن 0 C to 70 C
Packaging Type Tray
Port Count 3
Ethernet Speed 10 Mbps / 100 Mbps per port
Managed Features VLAN tagging, QoS priority queues, port-based rate limiting, ingress filtering
Auto-Negotiation Supported on all ports
Auto-MDIX Supported (HP Auto-MDIX)
Regulatory Compliance RoHS compliant
Product Status Active - full-featured 3-port managed switch for consumer, embedded and industrial designs
Evaluation Support EVB-LAN9353 evaluation board available

ڕێنمایی ڕێکخستنی پینی LAN9353/ML 64-qfn (9 x 9 mm) with exposed pad

ڕێکخستنی پین بۆ LAN9353/ML (پاکێجی 64-qfn (9 x 9 mm) with exposed pad). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 64-qfn (9 x 9 mm) with exposed pad بۆ LAN9353/ML

هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN9353/ML.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

LAN9353/ML گونجاوە بۆ 6 بەکارھێنانs: Embedded Linux / RTOS Ethernet Gateway, Industrial Automation and Building Controller, USB-to-Ethernet and Networked Storage Adapter, Smart Home and IoT Hub, Security Camera and Surveillance NVR Front End, Consumer Set-Top and Networked Appliance.

🌐

Embedded Linux / RTOS Ethernet Gateway

The LAN9353/ML fits gateways that must expose three 10/100 ports to a host processor without adding three external PHY chips. Because all three 10/100BASE-T/TX PHYs plus the switch fabric are integrated on a single 9 x 9 mm die, the gateway keeps a small board footprint while gaining per-port Auto-Negotiation and Auto-MDIX, which removes the need to fix cable orientation or link speed in software. The host configures VLANs, QoS queues and per-port rate limits over the I2C/SMBus interface, so a Linux driver or RTOS service can enforce segmentation between a service port, a management port and an uplink. Turbo MII provides up to 200 Mbps of host bandwidth, sufficient for line-rate forwarding on all three ports at 100 Mbps.

🏭

Industrial Automation and Building Controller

Industrial and building controllers use the LAN9353/ML to combine a controller uplink, an expansion network port and a service port on one device. Its managed features - VLAN tagging, 802.1Q priority queues and per-port ingress rate limiting - let a PLC-class controller isolate building-network traffic from control traffic without external switch chips. Operated with the LAN9353I/ML in environments down to -40 C, the same register map and land pattern are reused, so firmware and PCB artwork do not change between the commercial and industrial builds. The 1.8 V to 3.3 V core supply range allows direct interfacing with 1.8 V industrial processors, while the exposed pad keeps the PHY thermal load manageable on a densely populated DIN-rail board.

🖥️

USB-to-Ethernet and Networked Storage Adapter

The LAN9353/ML is a natural fit for USB-to-Ethernet dongles and small network storage appliances that need more than a single copper port. A USB-to-Ethernet adapter can use one port for the USB-facing uplink and expose the remaining ports to an external RJ-45 chassis, while a networked storage or print-server product can bridge a local host port to two downstream devices. Because the switch core handles store-and-forward frame handling internally, the host firmware only has to manage configuration rather than implement switching logic, which cuts both software effort and CPU loading. With the 64-QFN (9 x 9 mm) exposed-pad package, the device also fits inside compact plastic enclosures where the copper magnetics, rather than the switch, set the board size.

🧩

Smart Home and IoT Hub

Smart-home hubs and IoT gateways use the LAN9353/ML to offer wired 10/100 connectivity alongside wireless radios in the same enclosure. The three managed ports let a hub connect a wireless module, a camera or thermostat cluster, and an uplink router while the hub software enforces VLAN separation between guest and trusted devices, keeping cameras off the management network. Per-port rate limiting prevents a single high-bandwidth device such as a streaming camera from saturating the uplink, which is important because all ports share the host-side Turbo MII link running at up to 200 Mbps. Operating from 1.8 V to 3.3 V, the switch core can be powered directly from the same rail as a modern 1.8 V IoT application processor.

🎥

Security Camera and Surveillance NVR Front End

Camera and surveillance front-ends benefit from the LAN9353/ML because a single managed switch connects multiple 10/100 cameras plus an uplink while enforcing per-port rate limits that keep one camera stream from saturating the trunk. The VLAN and QoS register set lets the recorder mark video traffic as high priority so control traffic and firmware updates are not delayed behind continuous video streams, a real benefit on shared links. Integrated Auto-MDIX means installers do not have to match straight-through and crossover cabling, which removes a common field failure in installations with mixed cable types. Because the PHY analog sections are on-die and share the exposed pad, the thermal design is predictable and the switch fits alongside the image processor on the same board.

📺

Consumer Set-Top and Networked Appliance

Set-top boxes and networked consumer appliances use the LAN9353/ML to provide multiple Ethernet ports from one low-cost package. A set-top product can expose a service port, a DVR port and a home-network port while the appliance's main SoC manages VLAN and QoS settings over I2C, giving consumers a segmented home network without an external switch. The commercial 0 C to 70 C grade of the LAN9353/ML matches indoor appliance environments, and the tray packaging suits high-volume automated assembly lines. Because the PHY and switch core are integrated, the bill of materials replaces an external 3-port switch plus PHY arrangement, reducing board area, power-supply design effort and BOM cost at the same time.

What is the LAN9353/ML?
The LAN9353/ML is a Microchip Technology single-chip, 3-port 10/100 managed Ethernet switch controller with three integrated 10/100BASE-T/TX PHYs and an I2C/SMBus host interface. According to the Microchip LAN9353 datasheet (00001925A), it is designed for embedded applications where performance, flexibility, ease of integration and system cost control are required, and it supports host links at up to 200 Mbps via Turbo MII. The device is supplied in a 64-QFN (9 x 9 mm) package with an exposed pad and runs from a 1.8 V to 3.3 V core supply.
How many Ethernet ports does the LAN9353/ML provide?
The LAN9353/ML provides three 10/100BASE-T/TX ports, each with an integrated PHY, Auto-Negotiation and Auto-MDIX support. Distributor listings for LAN9353/ML describe it as a 3-port 10 Mbps/100 Mbps switch in a 64-pin QFN exposed-pad package, and DigiKey's LAN9353I/ML listing confirms the same 3-port architecture with a 64-QFN (9 x 9) outline. Because all three PHYs are on-die, no external PHY chips are required, though standard 10/100 Ethernet magnetics are still needed on each RJ-45 port.
What interface is used to configure the LAN9353/ML?
The LAN9353/ML is configured by the host over an I2C/SMBus interface. Microchip's LAN9353 datasheet (00001925A) documents the I2C/SMBus host interface used to access the switch registers for static and dynamic VLAN configuration, QoS, port enable/disable and rate limiting. This makes the part a natural fit for designs in which a host microcontroller or embedded Linux SoC owns network policy, because configuration is driven by software over two wires rather than by strapping resistors or a parallel host bus.
What supply voltage does the LAN9353/ML operate at?
The LAN9353/ML operates from a 1.8 V to 3.3 V core supply. Distributor and parametric listings for the LAN9353/ML specify a 1.8 V to 3.3 V voltage supply range, consistent with the Microchip LAN9353 datasheet (00001925A) for the device family. The wide range allows the switch to be paired with 1.8 V processors as well as 3.3 V logic. Note that the Ethernet line-side interface is powered from its own supply pins, so separate filtering and decoupling are typically applied between the core rail and the PHY rail.
What package does the LAN9353/ML come in?
The LAN9353/ML is supplied in a 64-QFN (9 x 9 mm) package with an exposed pad, in tray packaging. DigiKey lists the closely related LAN9353I/ML as 64-QFN (9 x 9), and FindIC and Digi Electronics both describe the LAN9353/ML as a 3-port 10/100 managed Ethernet switch in a 64-VFQFN exposed-pad tray package. The exposed thermal pad is required for heat removal from the integrated PHY analog sections and must be tied to the ground plane on the PCB.
What is the operating temperature range of the LAN9353/ML?
The LAN9353/ML is specified for a 0 C to 70 C commercial operating temperature range, as shown in distributor parametric listings for the part. Microchip's LAN9353 family covers consumer, embedded and industrial designs, and the related LAN9353I/ML ordering option extends the range for industrial environments. If your enclosure runs hotter than 70 C, choose the industrial temperature variant rather than relying on the commercial-grade LAN9353/ML, since PHY accuracy and lifetime ratings are tied to the specified junction temperature range.
Where can I download the LAN9353/ML datasheet PDF?
The official LAN9353 datasheet can be downloaded as PDF from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/00001925A.pdf, and the product landing page is at https://www.microchip.com/en-us/product/LAN9353. The document contains the full PHY characteristics, register map, timing diagrams, layout guidance and application information for the LAN9353/LAN9353i family. The datasheet is large and covers the entire family, so use the pinout, electrical characteristics and register sections that match the LAN9353/ML order code.
Where can I buy the LAN9353/ML online and what does it cost?
The LAN9353/ML can be ordered from authorized distributors including DigiKey, Mouser and Microchip Direct, with availability also aggregated on Octopart and Xecor. Indicative pricing as of 2026-10-28 is approximately US$7.42 in single-unit quantity, stepping down to roughly US$6.15 at 100 units, US$5.62 at 500 units and US$5.05 at 1,000 units, in tray packaging. Because managed-switch pricing moves with allocation, request a firm quote for production volumes rather than relying on single-piece distributor pricing.
What is the lead time for the LAN9353/ML?
The LAN9353/ML is an active, in-production part offered by multiple authorized distributors, so stock is normally available from distribution for prototype and moderate production quantities. Lead time for volume orders depends on Microchip wafer and test capacity and is not published as a fixed figure, so request a quotation with committed delivery dates for scheduled builds. If the device has an unexpected allocation on a specific lot, the practical mitigation is to qualify the LAN9353I/ML industrial variant as a second source within the same 64-QFN footprint family.
LAN9353/ML vs LAN9353I/ML - which one should I choose?
Choose the LAN9353/ML for commercial 0 C to 70 C environments and the LAN9353I/ML when you need industrial temperature operation. Both are 3-port 10/100 managed Ethernet switches with I2C/SMBus host control and the same 64-QFN (9 x 9 mm) exposed-pad footprint, so the boards are pin-compatible. The measured difference is the temperature grade: the LAN9353I/ML extends the range to -40 C to +85 C, which is the only change that matters for enclosure temperature and for production tests that must run in a cold-start or hot-box environment.
What is the best drop-in replacement for the LAN9353/ML?
The best drop-in replacement is the LAN9353I/ML, which shares the identical 64-QFN (9 x 9 mm) exposed-pad land pattern, the same three integrated 10/100 PHYs and the same I2C/SMBus host interface, differing only in temperature grade (-40 C to +85 C versus 0 C to 70 C). If your design runs strictly inside the commercial temperature window, the LAN9353I/ML is also a valid drop-in because the electrical ratings are unchanged. No pin, footprint or firmware-level change is required in either direction.
Can the LAN9353i/ML replace the LAN9353/ML in an existing design?
Yes - the LAN9353i/ML is a drop-in replacement for the LAN9353/ML in existing designs. Both devices use the same 64-QFN (9 x 9 mm) exposed pad footprint, the same pinout, the same 1.8 V to 3.3 V core supply range and the same I2C/SMBus register interface, so no PCB change and no host firmware change is required. The practical difference is the temperature grade and the ordering suffix, so verify the exact suffix on your bill of materials and confirm the temperature range your enclosure actually requires before releasing the change.
What can replace the LAN9353/ML in a design?
The parts that can replace the LAN9353/ML are the other order codes of the same Microchip LAN9353 family, principally the LAN9353I/ML industrial-temperature variant and the LAN9353i/ML variant, both in the identical 64-QFN (9 x 9 mm) exposed-pad package with the same I2C/SMBus host interface and integrated 10/100 PHYs. Because the device is highly integrated - three PHYs plus the switch fabric plus management registers in one 9 x 9 mm die - cross-manufacturer drop-in equivalents with an identical pinout are not available; cross-brand alternatives would require an adapter board. Verify the footprint and register map against the datasheet before substituting.
Is the LAN9353/ML the same as the LAN9353 base device?
The LAN9353/ML is the same silicon as the LAN9353 base ordering code - the /ML suffix identifies the specific package, temperature and packing option of that device family rather than a different function. Microchip's product page describes the LAN9353/LAN9353i as a single high-performance, small-footprint, full-featured 3-port managed Ethernet switch family for consumer, embedded and industrial designs. In practice you should treat LAN9353/ML as the orderable 64-QFN (9 x 9 mm) tray variant and confirm the suffix, temperature grade and package against the datasheet ordering information before placing production orders.
What are the key specifications of the LAN9353/ML that engineers should know?
The LAN9353/ML is a 3-port 10/100 managed Ethernet switch with integrated PHYs, an I2C/SMBus host interface, a 1.8 V to 3.3 V core supply, a 64-QFN (9 x 9 mm) exposed-pad package, 0 C to 70 C commercial operation and tray packaging, with Turbo MII host links up to 200 Mbps. The part carries three integrated 10/100BASE-T/TX PHYs with Auto-Negotiation and Auto-MDIX plus register-programmable VLAN, QoS and port rate-limiting features. It is a cost-optimized, highly integrated alternative to a discrete PHY-plus-switch design in embedded gateways and industrial controllers.
Is the LAN9353/ML suitable for industrial control and IoT gateway designs?
The LAN9353/ML is suitable for industrial and IoT gateway designs that operate inside the commercial 0 C to 70 C window, because it integrates three managed 10/100 ports plus the switch fabric in a single 9 x 9 mm package and exposes full VLAN, QoS and rate-limit configuration over I2C. For deployments in unheated cabinets, plant rooms or outdoor enclosures, specify the LAN9353I/ML instead, which shares the identical footprint and register set but extends operation to -40 C to +85 C. Both parts use standard 10/100 Ethernet magnetics on each port.
What is the best Microchip equivalent for the LAN9353/ML?
The best Microchip equivalent for the LAN9353/ML is the LAN9353I/ML, the industrial-temperature member of the same LAN9353 family. According to DigiKey's listing, the LAN9353I/ML is an Ethernet switch with 10/100 Base-T/TX PHY and I2C interface in a 64-QFN (9 x 9) package, meaning the footprint, pinout and host register interface are identical to the LAN9353/ML. The only substantive difference is the widened -40 C to +85 C temperature range, making it the appropriate choice for industrial, automotive-adjacent or extended-temperature equipment.
Does the LAN9353/ML need external Ethernet magnetics?
The LAN9353/ML integrates the 10/100BASE-T/TX PHY transceivers on-die, so no separate PHY chip is required at each port; however, standard 10/100 Ethernet isolation magnetics are still required between each PHY and its RJ-45 connector to meet isolation and impedance requirements. Microchip's LAN9353 datasheet (00001925A) provides reference schematic and layout guidance for the magnetics and the exposed pad connection. The exposed pad itself must be soldered to a solid ground plane to remove the heat generated by the integrated PHY analog sections.

داتای سەرچاوەی ئەندازیاری بۆ LAN9353/ML — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the LAN9353/ML when your design needs exactly three 10/100 copper ports, host-managed VLAN/QoS/rate-limiting, and a compact 64-QFN (9 x 9 mm) footprint in an indoor commercial-temperature enclosure running from a 1.8 V to 3.3 V core supply. Choose the LAN9353I/ML when the enclosure exceeds 70 C or must be tested at -40 C - the footprint, pinout and register map are identical, so this is a BOM change only. Choose the LAN9353i/ML or the base LAN9353 order code when your distributor's stocking program requires that specific suffix. If your design needs only one port and uses SPI, a single-port controller such as the ENC28J60/ML is smaller and cheaper but gives up hardware VLAN/QoS and host bandwidth. If you need gigabit, multi-gigabit or T1 PHY support, no drop-in exists in this package family and a platform change is required.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LAN9353I/ML LAN9353i/ML LAN9353
Package 64-QFN (9 x 9 mm) exposed pad 64-QFN (9 x 9 mm) exposed pad - same 64-QFN (9 x 9 mm) exposed pad - same 64-QFN (9 x 9 mm) exposed pad - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Port Count 3 x 10/100BASE-T/TX 3 x 10/100BASE-T/TX 3 x 10/100BASE-T/TX 3 x 10/100BASE-T/TX
Host Interface I2C / SMBus I2C / SMBus I2C / SMBus I2C / SMBus
Core Supply Voltage 1.8 V to 3.3 V 1.8 V to 3.3 V 1.8 V to 3.3 V 1.8 V to 3.3 V
Operating Temperature 0 C to 70 C -40 C to +85 C (industrial) -40 C to +85 C (industrial) 0 C to 70 C (commercial)
Switch Management Features VLAN, QoS, rate limiting, port enable VLAN, QoS, rate limiting, port enable VLAN, QoS, rate limiting, port enable VLAN, QoS, rate limiting, port enable
Host Link Speed Turbo MII up to 200 Mbps Turbo MII up to 200 Mbps Turbo MII up to 200 Mbps Turbo MII up to 200 Mbps

جیاکەرەوە سەرەکییەکان

  • Three managed 10/100 ports plus switch fabric in one 9 x 9 mm package (بەراورد بەENC28J60/ML)
  • Software-managed network features in hardware (بەراورد بەSingle-port ENC28J60/ML)
  • Straightforward industrial upgrade path with no PCB change (بەراورد بەLAN9353I/ML)
  • Host bandwidth headroom via Turbo MII (بەراورد بەLAN9353 base order code)

تێبینییەکانی دیزاین

The LAN9353/ML concentrates three integrated 10/100 PHY analog sections on one 9 x 9 mm die, so the exposed pad is not optional - it is the primary heat path. Solder the exposed pad to a full-layer copper pour using a stencil with a high aperture ratio so that voids stay below roughly 25% of the pad area, and keep a clear thermal-via field (4x4 grid of 0.3 mm finished holes) under the pad. Because the LAN9353/ML is specified 0 C to 70 C, the junction rise budget is narrower than on the industrial variant; measure the pad temperature in a sealed enclosure rather than relying on ambient readings, because heat accumulates inside the enclosure.

Follow the Microchip LAN9353 datasheet (00001925A) reference layout for the Ethernet magnetics: place each 10/100 transformer close to its RJ-45, keep the PHY-to-magnetics differential pair as short as possible, and route the pair as a tightly coupled 100-ohm differential pair with no stubs or vias. Provide dedicated 0.1 uF ceramic decoupling close to each supply pin and a bulk reservoir capacitor on the core rail, separating the 1.8 V to 3.3 V core supply from any noisy PHY rail with an LC or ferrite isolation network. Confirm the exposed pad connects to the same ground reference as the magnetics shield path to avoid ground-loop injection into the analog receive path.

The most common integration error is treating the LAN9353/ML as an unmanaged switch. Because it is a managed device, VLAN, QoS, port-enable and rate-limit registers must be initialized by the host over I2C/SMBus; if the host firmware does not run, the ports come up in power-on default state, which is rarely what the product specification expects. Second, treat the I2C bus as a shared resource: add correct pull-ups to the actual bus voltage, keep the bus capacitance within the SMBus limit, and isolate the switch from noisy bus nodes. Third, remember that standard 10/100 Ethernet magnetics are still required even though the PHYs are integrated on-die.

Keep the I2C/SMBus management bus physically separated from the Ethernet differential pairs and from the magnetics region to avoid coupling register traffic into the receive path. Provide a defined ground reference for the digital and analog sections by using a continuous ground plane with the exposed pad stitched to it, and avoid splitting the plane under the device. For firmware bring-up, expose the I2C lines, the reset path and a UART or SWD debug header on the test points so the switch configuration can be read back and verified without a full system assembly.

Estimated: the LAN9353/ML core operates from a 1.8 V to 3.3 V rail, and because the part is a switch rather than a regulator, the total rail current is the sum of PHY analog draw plus the digital core. Use the datasheet typical and maximum current figures for each rail when sizing the supply, then apply at least 20% margin for line-rate operation on all three ports simultaneously. Estimated junction rise equals total dissipation times the effective thermal resistance of the exposed-pad assembly; because that resistance is dominated by the PCB copper rather than the package, validate the thermal path on the final board rather than trusting a package-only number.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

RoHS compliance is indicated by distributor listings for the LAN9353/ML and Microchip's RoHS/REACH declarations apply to the LAN9353 family. AEC-Q100 qualification, lead-free status, halogen-free status and conflict-minerals declarations were not explicitly stated in the retrieved web data and are therefore listed as unknown. The LAN9353/ML is a commercial-temperature (0 C to 70 C) networking IC, so AEC-Q100 qualification is generally not applicable.

داتا پشتڕاستکراوەتەوە لە: 2026-10-28 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

LAN9353/ML LAN9353/ML datasheet PDF Microchip LAN9353 3-port managed Ethernet switch 64-QFN 9x9 Ethernet switch IC with integrated PHY LAN9353/ML 1.8V to 3.3V supply range LAN9353/ML vs LAN9353I/ML drop-in replacement for LAN9353/ML LAN9353/ML price and stock buy LAN9353/ML online distributor managed Ethernet switch with I2C configuration LAN9353/ML industrial Ethernet gateway design Ethernet switch IC for USB-to-Ethernet dongle what is Turbo MII in the LAN9353/ML LAN9353/ML exposed pad PCB layout guidance Microchip LAN9353 EVB-LAN9353 evaluation board

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology LAN9353 LAN9353/ML LAN9353I/ML LAN9353i/ML EVB-LAN9353 Ethernet switch controller Ethernet interface IC network interface controller 10/100BASE-T/TX PHY managed switch Turbo MII I2C SMBus VLAN tagging QoS priority queues port-based rate limiting Auto-Negotiation Auto-MDIX 64-QFN package QFN family surface mount exposed pad Ethernet magnetics RoHS 1.8 V to 3.3 V core supply
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ