LAN9730I-ABZJ-TR - USB 2.0 to 10/100 Ethernet Bridge | Microchip
MPN: LAN9730I-ABZJ-TR ✓ چالاکLAN9730I-ABZJ-TR گشتی
A USB-to-Ethernet controller is an interface IC that bridges a USB host connection and a 10/100 Base-T Ethernet network. It integrates the digital controller, USB interface, Ethernet MAC, and 10/100 Ethernet PHY into one device, reducing component count and simplifying the hardware design compared with a discrete USB controller and Ethernet transceiver arrangement. This integration places the LAN9730I-ABZJ-TR within the hierarchy of network interface controllers, interface ICs, and semiconductors.
The device supports USB 2.0 connectivity and 10/100 Ethernet operation in one 56-QFN package. Its principal engineering benefits are compact board area, fewer external interface components, and support for common embedded connectivity platforms. The integrated USB-to-Ethernet function is particularly useful where an existing USB host must provide network access without adding a separate Ethernet controller and physical-layer transceiver.
The LAN9730/LAN9730i family uses a High-Speed Inter-Chip, or HSIC, interface between the USB and Ethernet functional sections according to the manufacturer documentation. This partitioned architecture supports a dedicated high-performance path between the USB controller and Ethernet blocks while allowing the physical-layer magnetics to remain external to the IC. The LAN9730i designation identifies the industrial-temperature-range option intended for applications requiring operation across a wider environmental range than the standard LAN9730 variant.
Typical applications include embedded Linux systems, set-top boxes, personal video recorders, USB port replicators, industrial equipment, and Ethernet-enabled test instruments. It is especially relevant when a product already exposes USB but must present a standard 10/100 Ethernet connection to a network. The integrated bridge reduces routing and component count, although designers must still implement the Ethernet magnetics, isolation requirements, and connector path correctly.
For layout, place the HSIC and USB differential traces as controlled-impedance routes and keep the Ethernet magnetics close to the PHY connections. Power, decoupling, clock, and high-speed signal paths require careful partitioning according to the manufacturer reference design. Review the LAN9730/LAN9730i datasheet and databook for the complete pin description, recommended application circuit, exposed-pad thermal requirements, and supported operating limits.
This page organizes the verified package, protocol, application, lifecycle, and sourcing information for the LAN9730I-ABZJ-TR while adding application guidance, comparison context, and design-focused selection criteria for engineers evaluating USB-to-Ethernet connectivity.
جێگرەوەکانی جێگۆڕکێ بۆ LAN9730I-ABZJ-TR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN9730I-ABZJ-TR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە RoHS Status, USB Interface, Ethernet Data Rate, Package Type.
LAN9730-ABZJ-TR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN9730I-ABZJ-TR تایبەتمەندییەکان
| Product Type | USB 2.0 to 10/100 Ethernet bridge controller |
| USB Interface Version | USB 2.0 |
| Ethernet Data Rate | 10 Mbps or 100 Mbps |
| Ethernet Standard | 10/100 Base-T/TX |
| Internal Interface | High-Speed Inter-Chip (HSIC) |
| Temperature Grade | Industrial-temperature-range option |
| Package Type | 56-QFN |
| Package Dimensions | 8 mm x 8 mm |
| جۆری دامەزراندن | Surface mount |
| ژمارەی پینەکان | 56 pins |
| Integrated Ethernet PHY | 10/100 Base-T/TX PHY |
| Ethernet Transformer | External |
ڕێنمایی ڕێکخستنی پینی LAN9730I-ABZJ-TR 8 mm x 8 mm
ڕێکخستنی پین بۆ LAN9730I-ABZJ-TR (پاکێجی 8 mm x 8 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN9730I-ABZJ-TR.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LAN9730I-ABZJ-TR گونجاوە بۆ 6 بەکارھێنانs: Embedded USB-to-Ethernet Connectivity, Set-Top Box Network Port, USB Port Replicator, Personal Video Recorder, Industrial Test Instrumentation, Embedded Linux Network Adapter.
Embedded USB-to-Ethernet Connectivity
The LAN9730I-ABZJ-TR fits embedded systems that already use USB as a host interface but need a standard 10/100 Ethernet connection. Its USB 2.0 interface and integrated 10/100 Base-T/TX PHY combine two connectivity functions in a single 56-QFN package measuring 8 mm by 8 mm. Place the controller between the USB host and Ethernet transformer network, then reproduce the manufacturer reference circuit for HSIC routing, clocking, supply decoupling, and exposed-pad thermal management. This integration reduces discrete controller and PHY circuitry while preserving a conventional Ethernet connection for configuration, management, and data transfer.
پێشنیارکراو
Set-Top Box Network Port
The LAN9730I-ABZJ-TR can provide a 10 Mbps or 100 Mbps Ethernet port in a set-top box that has an internal USB host interface. The single-chip bridge supports a compact 56-QFN, 8 mm by 8 mm implementation and avoids separating the Ethernet controller from its PHY. The external Ethernet transformer remains part of the network path, while HSIC and USB routing require controlled impedance and careful partitioning from sensitive clock and supply nets. The industrial-temperature option is useful when enclosure temperature or operating-environment requirements exceed the standard LAN9730 grade.
پێشنیارکراو
USB Port Replicator
A USB port replicator can use the LAN9730I-ABZJ-TR to add wired 10/100 Ethernet connectivity to a host that exposes USB. The bridge operates at USB 2.0 and supports 10 Mbps or 100 Mbps Ethernet rates, making it suitable for management, network-boot, and peripheral data-transfer use cases. Its integrated controller and PHY in one 56-QFN package simplify board partitioning, although the design must include approved Ethernet magnetics, the connector, isolation components, and layout provisions defined by the manufacturer reference design.
پێشنیارکراو
Personal Video Recorder
The LAN9730I-ABZJ-TR supports network access in a personal video recorder when the internal architecture includes a USB host connection and requires an Ethernet interface for media transfer, remote administration, or service access. The controller provides USB 2.0 to 10/100 Ethernet bridging in a surface-mount 56-QFN package, which supports compact board planning. Designers should follow the manufacturer application circuit for HSIC implementation, power sequencing, Ethernet magnetics, and exposed-pad grounding, while checking the full operating-temperature requirement against the product's enclosure environment.
پێشنیارکراو
Industrial Test Instrumentation
The LAN9730I-ABZJ-TR is suitable for test instrumentation that needs a compact USB-to-Ethernet bridge and must operate across an industrial temperature range. Its 10/100 Base-T/TX PHY, USB 2.0 interface, and 56-QFN package provide a compact implementation for instruments that expose USB service connectivity while also communicating over Ethernet. The industrial-temperature designation is the key reason to select the LAN9730i rather than the standard LAN9730 variant. Production designs should still validate thermal performance, magnetics selection, clocking, isolation, and high-speed signal routing against the manufacturer reference materials.
پێشنیارکراو
Embedded Linux Network Adapter
The LAN9730I-ABZJ-TR can bridge an embedded Linux system's USB host port to a 10/100 Ethernet network for software updates, diagnostics, or remote management. The bridge supports USB 2.0 and Ethernet rates of 10 Mbps and 100 Mbps while consolidating the interface functions in an 8 mm by 8 mm package. Integration simplifies board design, but successful deployment still depends on a compatible host driver, correct HSIC clock and power implementation, manufacturer-recommended Ethernet magnetics, and a PCB layout that separates USB, HSIC, and sensitive supply paths.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LAN9730I-ABZJ-TR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LAN9730-ABZJ-TR |
|---|---|---|
| Package | 56-QFN (8x8 mm) | 56-QFN (8x8 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Product Type | USB 2.0 to 10/100 Ethernet bridge controller | USB 2.0 to 10/100 Ethernet bridge controller |
| USB Interface | USB 2.0 | USB 2.0 |
| Ethernet Data Rate | 10 Mbps or 100 Mbps | 10 Mbps or 100 Mbps |
| Ethernet Interface | 10/100 Base-T/TX | 10/100 Base-T/TX |
| Internal Interface | High-Speed Inter-Chip (HSIC) | High-Speed Inter-Chip (HSIC) |
| Temperature Grade | Industrial-temperature-range option | Standard-temperature-grade option |
| Pin Count | 56 pins | 56 pins |
| Package Body Size | 8 mm x 8 mm | 8 mm x 8 mm |
| Mounting Type | Surface mount | Surface mount |
| Special Feature | Industrial-temperature LAN9730i option | Standard LAN9730 temperature option |
جیاکەرەوە سەرەکییەکان
- Industrial-temperature family option (بەراورد بەLAN9730-ABZJ-TR)
- Single-chip USB-to-Ethernet integration (بەراورد بەLAN9730-ABZJ-TR)
- Same-package family compatibility (بەراورد بەLAN9730-ABZJ-TR)
تێبینییەکانی دیزاین
Reproduce the manufacturer reference layout for the HSIC, USB, clock, supply, and Ethernet PHY sections. Treat USB and HSIC as high-speed differential or controlled-impedance paths, place their decoupling close to the relevant pins, and avoid routing them through noisy power or clock regions. The 56-QFN exposed pad should be connected to the required ground plane and thermal structure exactly as directed in the manufacturer package guidance.
Confirm USB impedance, HSIC routing, Ethernet differential-pair geometry, and isolation strategy against the manufacturer application circuit. Ethernet magnetics are external to the LAN9730I-ABZJ-TR even though the 10/100 PHY is integrated, so the transformer-to-PHY trace segment must preserve pair symmetry and minimize discontinuity. Validate the complete clock and supply arrangement under 10 Mbps and 100 Mbps operation before releasing the PCB layout.
Do not treat a shared 56-QFN package as sufficient proof that another USB-to-Ethernet controller is interchangeable. Verify pin names, supply rails, HSIC clock requirements, reset behavior, firmware support, magnetics selection, and exposed-pad requirements. In particular, the LAN9500A-ABZJ uses multiple supply voltages according to comparison information, so its power architecture must be reviewed rather than assuming automatic compatibility with the single-supply LAN9730 family.
Follow the manufacturer power-decoupling network and recommended component placement. Separate the Ethernet PHY and digital supply paths according to the reference design, provide local low-inductance bypassing at the controller pins, and account for startup sequencing where required by the platform. Validate supply tolerances and current consumption across USB attach, Ethernet link, suspend, reset, and fault states before finalizing the power architecture.
زانیاری پابەندبوون
The industrial-temperature designation describes operating-temperature capability and does not by itself establish AEC-Q100 qualification or other environmental compliance.