LFE2-35E-5F672I - 32K LUT ECP2 FPGA, 450 I/O, 672-BBGA | Lattice
MPN: LFE2-35E-5F672I ✓ چالاکLFE2-35E-5F672I گشتی
An FPGA is a programmable logic device: a semiconductor whose interconnect and logic fabric are configured at power-up from a bitstream held in external flash, so one physical part can implement many different circuit functions. The LFE2-35E-5F672I belongs to the ECP2 family, which sits in the broader programmable-logic hierarchy: FPGA -> programmable logic device -> digital ASIC alternative -> digital integrated circuit. Lattice positions the ECP2 series as a cost-effective, low-power mid-density platform for high-speed processing and data transmission designs that need more parallelism than a microcontroller or discrete logic can deliver.
Catalogued device attributes for this part include 32,000 logic cells, 450 user I/O, dedicated DSP resources, a 1.2 V core voltage, and the -5 speed grade in an industrial temperature option. The 672-ball BGA land pattern offers a large number of high-speed differential-capable I/O in a compact square footprint, which is what makes the device attractive for parallel data acquisition, video pipeline processing and multi-channel interface bridging where a smaller package would run out of pins.
The -5 speed suffix denotes the Lattice speed grade for this device within the ECP2 family, so it can be ordered alongside slower -3 and faster -7 options in the same 672-ball package without changing the board layout. The trailing I character marks the industrial temperature grade, while the 5 in the part number denotes the 5 V configuration bank family characteristic of this ECP2 variant. Device configuration is handled through the standard Lattice ECP2 configuration path, so the design can be programmed in-circuit from a serial flash or a microcontroller.
Typical end uses for this part include video and image pipeline processing, industrial control and test instrumentation, communications and data-transmission equipment, and general-purpose signal conditioning or protocol bridging. In each case the combination of 32K LUTs, 450 I/O and DSP capability allows several parallel datapaths to be consolidated into one device instead of a collection of discrete components.
When designing around the LFE2-35E-5F672I, treat the 1.2 V core rail as the critical supply: decouple it close to the ball grid with low-inductance ceramic capacitance and keep the switching-noise budget for surrounding analog sections in mind, since a 672-ball BGA also presents a substantial thermal and decoupling challenge on multilayer boards. Use the manufacturer datasheet for the full pin, ball and power-supply assignment list.
This page consolidates the verified distributor and catalogue data for the LFE2-35E-5F672I, adds same-footprint drop-in alternatives from the ECP2 and related Lattice families, and supplies the application, thermal and layout guidance that a bare catalogue listing does not provide.
جێگرەوەکانی جێگۆڕکێ بۆ LFE2-35E-5F672I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LFE2-35E-5F672I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type, Logic Cells, Package.
LFE2-35E-5FN672I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LFE2-35E-7F672I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LFECP33E-4FN672I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LFECP33E-3FN672I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LFEC33E-4FN672I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LFEC33E-3FN672I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LFE2-35E-5F672I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | ECP2 Field Programmable Gate Array (FPGA) |
| Logic Cells | 32,000 cells (32K LUTs) |
| User I/O | 450 I/O |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -5 |
| Temperature Grade | Industrial |
| Process Technology | 90 nm |
| پاکێج | 672-ball BGA (FBGA), square |
| Terminal Type | Ball |
| Number of Terminals | 672 |
| Package Shape | Square |
| Shipping Format | Tray |
| Logic Family | ECP2 |
| Device Description | ECP2 FPGA, 32K LUTs, 450 I/O, DSP, 1.2 V, -5 speed, industrial |
| دۆخی RoHS | unknown |
ڕێنمایی ڕێکخستنی پینی LFE2-35E-5F672I square
ڕێکخستنی پین بۆ LFE2-35E-5F672I (پاکێجی square). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LFE2-35E-5F672I.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LFE2-35E-5F672I گونجاوە بۆ 6 بەکارھێنانs: Video and Image Pipeline Processing, Industrial Control and Test Instrumentation, Communications and Data Transmission Equipment, LED Lighting and Display Control, Server, Storage and Networking Equipment, Aerospace, UAV and Defence Payload Processing.
Video and Image Pipeline Processing
The LFE2-35E-5F672I suits video capture and processing boards because it pairs 32,000 logic cells with 450 user I/O, enough parallel capacity to absorb multi-channel pixel pipelines, colour-space conversion and de-noising stages without offloading to external glue logic. DSP resources listed for this device can handle multiply-accumulate stages in filter or scaler paths, while the -5 speed grade on a 1.2 V core gives usable timing margin for registered video timing at typical pixel clock rates. The wide 672-ball BGA also allows high-speed differential video interfaces and parallel sensor buses to terminate on the FPGA itself. Because a 672-ball package is a demanding layout, budget for a multilayer PCB with a solid ground plane and short, tightly decoupled 1.2 V core rails.
پێشنیارکراو
Industrial Control and Test Instrumentation
In industrial control panels, automated test equipment and data-acquisition chassis, the LFE2-35E-5F672I provides the deterministic parallel logic and abundant I/O that modern instrument front-ends demand: instrument bus interfaces, relay and solenoid drive sequencing, ADC sample capture and calibration tables can all be consolidated into one device. The 450 user I/O count lets a single FPGA replace several CPLDs and glue ICs, while the 32K LUT budget supports state machines, timing generators and protocol converters running concurrently. The industrial temperature grade suits enclosure-internal designs, and the -5 speed grade targets mid-speed control loops. Use the ECP2 configuration path so the bitstream can be loaded in-circuit, which allows field upgrades of test programs without desoldering the device.
پێشنیارکراو
Communications and Data Transmission Equipment
For line cards, protocol converters and multi-channel interface concentrators, the LFE2-35E-5F672I combines the raw I/O count and DSP support needed to terminate and re-time several data paths in one device. Typical designs use the 450 user I/O for parallel backplane buses, and the DSP multipliers for line-rate encoding, CRC, equalisation or FIR shaping, with the 32K logic cells handling framing, flow control and error management. The -5 speed grade on a 1.2 V core is appropriate for these rates, and the industrial temperature grade supports cabinet-mounted equipment. Keep high-speed differential pairs length-matched, provide per-bank supply filtering so switching currents do not inject into sensitive clocking circuits, and confirm the AC timing for your target data rate directly from the manufacturer ECP2 datasheet before committing the board.
پێشنیارکراو
LED Lighting and Display Control
Large-format LED walls, video matrix processors and backlight controllers are typical consumers of this part's combination of 32,000 logic cells and 450 user I/O: the logic fabric implements the refresh timing generators, gamma and colour-processing pipelines and fault monitoring, while the wide I/O bank drives the panel data and addressing lines directly. Using the LFE2-35E-5F672I removes the need for a separate driver ASIC and simplifies the timing chain. The -5 speed grade comfortably supports standard refresh rates, and the industrial grade covers the ambient conditions inside display enclosures and controller cabinets. For LED drive chains, keep the high-current switching return paths physically separate from the FPGA ground and supply pins to avoid ground bounce coupling into the timing logic.
پێشنیارکراو
Server, Storage and Networking Equipment
In server blades and storage controllers, the LFE2-35E-5F672I can act as the front-end logic engine that arbitrates buses, drives backplanes and performs low-latency packet or frame manipulation. The 450 user I/O is valuable in chassis designs where a wide parallel bus meets a small number of high-speed serial links, and the DSP resources accelerate checksum, encryption and filter functions that would otherwise burden a general-purpose processor. The 32K logic cells allow redundant health monitoring and power-sequencing logic to run alongside the datapath on the same die, reducing board area. Choose this part when the design is I/O-bound rather than logic-bound; if the architecture is dominated by serial protocol handling, verify the ECP2 serialiser resources against your lane count in the manufacturer datasheet before selecting it.
پێشنیارکراو
Aerospace, UAV and Defence Payload Processing
Unmanned aerial vehicle payloads, avionics adjunct boxes and defence subsystems favour programmable logic for compact, reconfigurable signal processing, and the LFE2-35E-5F672I provides 32,000 logic cells with 450 I/O in a single 672-ball device. That combination allows radar or datalink front-ends to combine channelisation, filtering and protocol framing on one die, keeping the payload small and the bitstream updatable for fielded missions. The industrial temperature grade covers many ground and air payloads; confirm the junction and ambient envelope required by your programme from the manufacturer datasheet, and note that radiation and altitude qualification are programme-level requirements not covered by the device grade. Mechanically, a 672-ball BGA needs a stiffener or via-in-pad construction, so validate the assembly method with your fabricator early.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LFE2-35E-5F672I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LFE2-35E-5FN672I | LFE2-35E-7F672I | LFECP33E-4FN672I | LFEC33E-4FN672I |
|---|---|---|---|---|---|
| Package | 672-BBGA (FBGA), square, ball terminals | 672-BBGA - same | 672-BBGA - same | 672-FBGA - same footprint | 672-FBGA - same footprint |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Family | ECP2 | ECP2 | ECP2 | LFECP 33K class | LFEC 33K class |
| Logic Cells / LUTs | 32,000 cells (32K LUTs) | 32,000 cells (32K LUTs) | 32,000 cells (32K LUTs) | 33K class | 33K class |
| Speed Grade | -5 | -5 (identical) | -7 (faster) | -4 | -4 |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial | Industrial |
| Shipping Format | Tray | Tray | Tray | Tray | Tray |
جیاکەرەوە سەرەکییەکان
- Exceptionally wide I/O and logic density in the ECP2 family for interface-centric designs (بەراورد بەLFE2-12E-5F484I)
- Identical silicon and footprint for zero-cost substitution risk (بەراورد بەLFE2-35E-5FN672I)
- Timing headroom when a faster bin is needed on the same board (بەراورد بەLFE2-35E-7F672I)
- Path to a higher logic class without changing the board footprint (بەراورد بەLFECP33E-4FN672I)
تێبینییەکانی دیزاین
Estimated: with a 1.2 V core rail and a total core power of 0.5 W, and assuming theta_JA of roughly 25 C/W on a well-via'd multilayer board, the junction temperature rises about 12.5 C above ambient. The real constraint is not average dissipation but loop inductance: place the bulk and ceramic decoupling directly on the core and bank supply balls, stitch the planes beneath the device, and route each supply group as a single contiguous plane region exactly as grouped in the manufacturer ball-assignment table. Keep the switching return current out of the quiet analog reference nets.
A 672-ball square BGA forces a multilayer stack-up: use at least six layers with short via-in-pad or via-fanout escape on the two outer layers, a dedicated solid ground plane and split or partitioned power planes for the core and bank rails. Because the ECP2 configuration pins must be brought out for in-circuit programming, reserve access to the configuration balls and keep the serial flash interface routing short and away from high-speed data pairs. Confirm the recommended land pattern and the assembly process (standard reflow versus bonded-wire flip-chip) with the manufacturer package documentation before releasing artwork.
With 672 balls acting as the primary heat path, junction temperature depends almost entirely on the via farm and copper area under the die. Estimated: a 10 x 10 via array of 0.2 mm finished-drill vias on 0.4 mm pitch, each with roughly 20 C/W of vertical spreading resistance, drops the effective package-to-ambient resistance well below the bare-die estimate and typically keeps a 1-2 W ECP2 design within a few tens of degrees of ambient. For sustained industrial operation, model the enclosure, confirm the maximum junction rating in the datasheet, and consider a spreader or heat sink path through the board rather than relying on airflow alone.
The most common errors with this class of part are (1) treating the ordering suffix as a different silicon device and swapping parts whose configuration or timing differs, (2) leaving unused configuration balls floating instead of tying them to their defined state, (3) designing a board that cannot support 672 balls with adequate escape routing, and (4) under-decoupling the 1.2 V core. Because the LFE2-35E-5F672I ships in trays, also confirm moisture level, bake and floor-life handling with the assembly house, as a 672-ball package has a large exposed die and a long drying requirement.
زانیاری پابەندبوون
No explicit RoHS, REACH, lead-free or AEC-Q100 statements appear in the distributor and catalogue records for this part; compliance status must be confirmed from the manufacturer product page or the declaration-of-compliance documentation for the exact ordering code.