NXP Semiconductors

LPC2366FBD100K - 72MHz ARM7 MCU with Ethernet | NXP

MPN: LPC2366FBD100K ✓ چالاک
3.0 V to 3.6 V Vdss 100-pin LQFP, 14 mm x 14 mm Package 72 MHz Speed 256 KB flash Memory
MOQ: 1 |

LPC2366FBD100K گشتی

NXP Semiconductors LPC2366FBD100K is an ARM7 16/32-bit embedded microcontroller operating at 72 MHz, with 256 KB of flash memory and up to 58 KB of SRAM in a 100-pin LQFP package. It integrates an Ethernet MAC, USB Device, Host and OTG support, a DMA controller, four UARTs, two CAN channels, three SSP/SPI interfaces, three I2C interfaces, and I2S. The device also includes an 8-channel 10-bit ADC, a 10-bit DAC, two PWM channels, and four general-purpose timers.

An ARM7 microcontroller is a single-chip embedded processing component that combines a CPU core, program memory, data memory, and peripherals on one integrated circuit. The ARM7 family is part of the broader microcontroller hierarchy, where a microcontroller integrates a processor, memory, and dedicated I/O functions into a compact semiconductor intended for control-oriented products.

The LPC2366FBD100K is designed for embedded systems requiring extensive communications and mixed-signal connectivity. Its 256 KB flash provides embedded program storage, while up to 58 KB of SRAM supports working data, buffers, protocol stacks, and Ethernet or USB traffic. Integrated Ethernet MAC, USB, and CAN connectivity can reduce the number of discrete interface devices required in a controller.

The ARM7TDMI-S architecture combines a 16/32-bit instruction set with real-time emulation support. At 72 MHz, the processor provides substantially greater computational headroom than many earlier 8-bit or 16-bit controllers while retaining the deterministic behavior required by embedded applications. Hardware peripherals including DMA, UART, CAN, SSP/SPI, I2C, timers, PWM, ADC, and DAC distribute common workloads from the CPU.

Typical uses include industrial Ethernet controllers, USB-to-serial gateways, CAN-based industrial nodes, data acquisition equipment, embedded networking appliances, and compact control systems. The combination of Ethernet, USB, CAN, serial interfaces, and analog conversion is particularly useful when a product needs multiple communication methods without relying on several companion microcontrollers.

Board design should preserve the package pin assignments and provide the power, clock, reset, and decoupling requirements specified in the NXP manufacturer datasheet. Ethernet magnetics, USB protection, and high-speed signal routing require careful layout control. Firmware must also reserve the correct peripheral instances, pin multiplexing, interrupt priorities, and memory regions before enabling high-speed communication paths.

This product page consolidates the manufacturer specifications, available ordering information, interface details, and engineering guidance for LPC2366FBD100K. It supports faster component identification and provides practical context for selecting the MCU, planning firmware resources, checking PCB requirements, and comparing same-footprint alternatives.

جێگرەوەکانی جێگۆڕکێ بۆ LPC2366FBD100K — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LPC2366FBD100K (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, DAC, DMA Controller, Product Type, USB Interface.

NXP Semiconductors
Package: LQFP-100 (14 x 14 mm), gull-wing
DAC: 10-bit
DMA Controller: General-purpose DMA
بەراوردکردن لەگەڵ LPC2366FBD100K →
NXP Semiconductors
Package: 100-lead LQFP, 14 x 14 mm
Product Type: 16/32-bit ARM7 microcontroller
USB Interface: USB 2.0 Device, Host, and OTG
بەراوردکردن لەگەڵ LPC2366FBD100K →

LPC2366FBD100,551

✅ جێگرەوەی ڕاستەوخۆ
📦 100-pin LQFP (14x14)
Same LPC2366FBD100 72 MHz device and 100-pin LQFP footprint; ordering suffix differs, with 0% difference in the stated 72 MHz frequency, 256 KB flash, and 58 KB SRAM

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LPC2366FBD100K زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type ARM7 16/32-bit embedded microcontroller
CPU Frequency 72 MHz
Program Memory 256 KB flash
RAM Memory Up to 58 KB
CPU Architecture ARM7TDMI-S
ڤۆڵتیەی دابینکردن 3.0 V to 3.6 V
Ethernet Interface 1 Ethernet MAC
USB Interface USB Device, Host, and OTG
CAN Channels 2 channels
UART Channels 4 channels
SSP/SPI Interfaces 3 channels
I2C Interfaces 3 channels
ADC 8-channel, 10-bit
DAC 1-channel, 10-bit
PWM Channels 2 channels
General-Purpose Timers 4 channels
DMA Controller 1 controller
Audio Interface I2S
پاکێج 100-pin LQFP, 14 mm x 14 mm
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی LPC2366FBD100K 100-pin lqfp, 14 mm x 14 mm

ڕێکخستنی پین بۆ LPC2366FBD100K (پاکێجی 100-pin lqfp, 14 mm x 14 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 100-pin lqfp, 14 mm x 14 mm بۆ LPC2366FBD100K

هیچ داتای وردی پینئاوت بەردەست نییە بۆ LPC2366FBD100K.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

LPC2366FBD100K گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Controllers, USB-to-CAN Gateways, Embedded Data Acquisition, USB-Conditioning and Peripheral Hubs, Automotive and Transportation Control Modules, Networked Sensor and Monitoring Nodes.

🏭

Industrial Ethernet Controllers

The LPC2366FBD100K fits industrial Ethernet controllers because it combines a 72 MHz ARM7TDMI-S processor with an integrated Ethernet MAC and up to 58 KB of SRAM. The NXP manufacturer datasheet also identifies four UARTs, three SSP/SPI channels, three I2C channels, and a DMA controller, allowing the controller to manage network traffic and local sensors or actuators without a second processor. Firmware can allocate Ethernet descriptors, keep protocol buffers in SRAM, and use DMA for efficient transfers. The final board still needs correctly designed Ethernet magnetics, controlled impedance routing, proper decoupling, and surge protection suited to the installation environment.

🔌

USB-to-CAN Gateways

The LPC2366FBD100K is appropriate for a USB-to-CAN gateway because its USB Device, Host, and OTG support is paired with two CAN channels and a 72 MHz ARM7 core. The NXP manufacturer datasheet identifies DMA, four UARTs, three SSP/SPI channels, and three I2C channels for configuration, logging, and peripheral expansion. Protocol processing can run on the ARM7 processor while DMA assists with data movement between USB and CAN. Implementation should verify timing across both buses, define bus termination and transceiver fault handling, validate USB impedance routing, and include firmware limits for arbitration, error recovery, and unexpected bus traffic.

📟

Embedded Data Acquisition

The LPC2366FBD100K supports embedded data-acquisition systems that need both control logic and analog measurement. Its 8-channel 10-bit ADC can collect sensor data, while the 10-bit DAC provides an analog output for setpoints or test signals. The NXP manufacturer datasheet identifies four general-purpose timers, two PWM channels, three I2C channels, three SSP/SPI channels, and four UARTs for sensor front ends, displays, logging, and communications. Firmware can use timers for deterministic sampling and DMA for efficient transfers, while the 256 KB flash stores application code. Board-level accuracy also depends on analog grounding, input filtering, reference design, calibration, and separation from switching and digital return currents.

🖥️

USB-Conditioning and Peripheral Hubs

The LPC2366FBD100K can serve as the controller in a USB peripheral hub or conditioning device because it supports USB Device, Host, and OTG at a 72 MHz operating frequency. Its 256 KB of flash accommodates firmware while up to 58 KB of SRAM supports descriptors, buffers, and protocol state. The NXP manufacturer datasheet identifies DMA and three SSP/SPI channels that can assist with data movement and connection to storage, displays, or configuration peripherals. The design should validate USB host and device roles, current budgets, connector protection, and signal routing. Firmware must also handle enumeration, suspend and resume behavior, over-current responses, and simultaneous access to shared SPI or I2C peripherals.

🚗

Automotive and Transportation Control Modules

The LPC2366FBD100K is suited to compact transportation-control modules that need several communication paths and local analog control. Two CAN channels support vehicle or industrial network connectivity, while Ethernet and USB provide service, diagnostics, or maintenance links. The NXP manufacturer datasheet identifies a 72 MHz ARM7TDMI-S core, 256 KB flash, up to 58 KB SRAM, timers, PWM, and ADC resources for application control. The controller can execute protocol stacks and deterministic timing routines without a separate communication processor. Qualification for a specific vehicle platform still requires verification of temperature grade, transient immunity, EMC performance, power architecture, and any application-specific certification before production release.

🧩

Networked Sensor and Monitoring Nodes

The LPC2366FBD100K works in networked sensor nodes because it combines Ethernet and CAN connectivity with multiple serial peripherals and an 8-channel 10-bit ADC. The NXP manufacturer datasheet identifies three I2C channels, three SSP/SPI channels, four UARTs, two PWM outputs, and four general-purpose timers for sensors, local actuators, and status reporting. A node can sample analog channels on a scheduled basis, preprocess data, and transmit it over an available network interface using DMA-assisted transfers. Power-conscious firmware can idle unused peripherals and adapt sampling rates to reduce activity. Deployment still needs careful sensor grounding, protection, calibration, enclosure thermal design, and network-security measures appropriate to the operating environment.

کورتەی بەرهەمە پێشنیارکراوەکان

LPC2366FBD100 Base device designation for the same LPC2366 integrated controller بەکارهێنراوە لە: Industrial Ethernet Controllers, USB-to-CAN Gateways, Embedded Data Acquisition, USB-Conditioning and Peripheral Hubs, Automotive and Transportation Control Modules, Networked Sensor and Monitoring Nodes LPC2366FBD100,551 Same-family ordering configuration بەکارهێنراوە لە: Industrial Ethernet Controllers, USB-to-CAN Gateways, Embedded Data Acquisition, USB-Conditioning and Peripheral Hubs, Automotive and Transportation Control Modules, Networked Sensor and Monitoring Nodes
What is the LPC2366FBD100K?
The LPC2366FBD100K is a 72 MHz ARM7TDMI-S 16/32-bit embedded microcontroller with 256 KB of flash memory, up to 58 KB of SRAM, and extensive communications peripherals. According to the NXP manufacturer datasheet and product information, it combines an Ethernet MAC, USB Device/Host/OTG, CAN, UART, SPI, I2C, ADC, DAC, timers, PWM, DMA, and I2S in a 100-pin LQFP package.
What are the key specifications engineers should know about LPC2366FBD100K?
The LPC2366FBD100K operates at 72 MHz and includes 256 KB of flash, up to 58 KB of SRAM, an Ethernet MAC, USB Device/Host/OTG, two CAN channels, four UARTs, three SSP/SPI interfaces, and three I2C interfaces. The NXP manufacturer datasheet also identifies an 8-channel 10-bit ADC, a 10-bit DAC, two PWM channels, four general-purpose timers, DMA, and I2S.
Where can I download the LPC2366FBD100K datasheet PDF?
The official LPC2366FBD100 documentation is available through the NXP product page linked on this page. The NXP manufacturer datasheet contains the complete ARM7TDMI-S architecture description, memory map, register definitions, electrical characteristics, package information, and pin descriptions. Use that document for authoritative programming and PCB-design requirements.
Where can I find the LPC2366FBD100K pinout?
The LPC2366FBD100K pinout is defined in the pin-description section and package drawing of the NXP manufacturer datasheet. Because this 100-pin LQFP exposes numerous power, ground, analog, communications, and debug functions, use the datasheet pin table directly when assigning tracks. Do not infer sensitive analog or USB connections from the package drawing alone.
What communication interfaces does the LPC2366FBD100K provide?
The LPC2366FBD100K provides an Ethernet MAC, USB Device, USB Host, and USB OTG, plus four UARTs, two CAN channels, three SSP/SPI channels, three I2C channels, and an I2S interface. According to the NXP manufacturer datasheet, this interface mix supports embedded networking, service interfaces, industrial CAN nodes, peripheral expansion, and digital audio connections.
Can LPC2366FBD100K be used for industrial Ethernet applications?
Yes, the LPC2366FBD100K is suitable for industrial Ethernet applications because it integrates an Ethernet MAC with a 72 MHz ARM7 processor and up to 58 KB of SRAM. The NXP manufacturer datasheet identifies DMA and multiple serial peripherals that can support network traffic management and peripheral connectivity, although the final design still requires suitable Ethernet magnetics, signal conditioning, and careful high-speed layout.
What is the difference between LPC2366FBD100K and LPC2366FBD100,551?
LPC2366FBD100K and LPC2366FBD100,551 identify variants of the LPC2366FBD100 device family and are both associated with the 100-pin LQFP implementation. The distinguishing characteristics are encoded by the NXP ordering suffixes, including temperature and delivery configuration. Confirm the suffix against the NXP product page and manufacturer datasheet before treating one as a procurement substitute for the other.
When should I choose LPC2366FBD100K over a similar ARM7 microcontroller?
Choose LPC2366FBD100K when the design benefits from its combination of a 72 MHz ARM7TDMI-S core, 256 KB flash, up to 58 KB SRAM, Ethernet MAC, USB, and two CAN channels in one 100-pin LQFP package. The NXP manufacturer datasheet indicates that this integration is appropriate for embedded networking, industrial communication, data acquisition, and control systems requiring several interface types.
Is LPC2366FBD100K suitable for USB and CAN gateway designs?
The LPC2366FBD100K is suitable for combined USB and CAN gateway designs because it includes USB Device, Host, and OTG capability together with two CAN channels. According to the NXP manufacturer datasheet, its 72 MHz ARM7TDMI-S core can manage protocol processing while four UARTs, three SSP/SPI interfaces, and three I2C interfaces support additional service or configuration connections.
What can replace the LPC2366FBD100K?
The closest documented same-family replacement is LPC2366FBD100,551, which is offered with the same LPC2366FBD100 100-pin LQFP device identity. According to the NXP ordering information, suffix differences can affect temperature grade or delivery format, so engineers should verify the complete ordering code, pin configuration, temperature requirements, and production status before replacement.
Where can I buy LPC2366FBD100K online?
Use the Request a Quote form on this page to request LPC2366FBD100K availability, current lead time, and an order quotation. The form lets you specify the required quantity and package or delivery configuration. For an immediate quotation, include the complete LPC2366FBD100K ordering code and any required traceability or compliance documentation in your request.
What is the price of LPC2366FBD100K?
The current LPC2366FBD100K quotation is generated through the Request a Quote form on this page. Submit the required quantity, delivery format, and project details to receive current commercial terms. The form avoids stale price displays and supports volume-dependent sourcing, production planning, and supply-chain review for this 100-pin LQFP microcontroller.
What is the lead time and is LPC2366FBD100K in stock?
Current LPC2366FBD100K stock status and lead time should be requested through the Request a Quote form on this page. Include your required quantity, delivery format, target date, and approved manufacturer-suffix details. This gives the sourcing team the information needed to confirm allocation and provide a meaningful delivery commitment.
Is there an NXP LPC2366FBD100K replacement with the same package?
The LPC2366FBD100,551 is the directly documented same-family option associated with the LPC2366FBD100 100-pin LQFP device, while the LPC2364FBD100,551 appears in a direct comparison but does not have the same memory capacity. For a footprint-first replacement, verify the complete NXP manufacturer datasheet, especially flash size, SRAM, peripheral population, pin multiplexing, and electrical limits.
What are the main design constraints for an LPC2366FBD100K circuit board?
The principal constraints are correct power and decoupling, proper clock and reset implementation, exact pin multiplexing, and controlled routing for Ethernet and USB signals. The NXP manufacturer datasheet defines the electrical and pin requirements. Keep sensitive analog inputs away from aggressive switching paths, use the specified decoupling network, and validate the complete high-speed interface layout against the manufacturer reference guidance.

داتای سەرچاوەی ئەندازیاری بۆ LPC2366FBD100K — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose LPC2366FBD100K when an embedded design needs a 72 MHz ARM7TDMI-S controller with 256 KB flash, up to 58 KB SRAM, Ethernet, USB, CAN, extensive serial I/O, and analog conversion in a 100-pin LQFP. The integrated Ethernet MAC, USB controller, DMA, four UARTs, two CAN channels, three SSP/SPI channels, and three I2C channels make it especially useful for gateways, industrial nodes, data-acquisition systems, and multi-protocol control products. LPC2366FBD100,551 is the closest same-family ordering option when its temperature, packing, and delivery configuration satisfy the project; the visible device parameters remain the same. Do not select a different LPC2300 member merely because it uses a similar package, since flash capacity, SRAM, peripheral population, and pin multiplexing can differ. Validate startup configuration, memory constraints, communications timing, thermal conditions, and PCB signal integrity before releasing the design.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LPC2366FBD100,551
Brand NXP Semiconductors NXP Semiconductors
Package 100-pin LQFP (14x14 mm) 100-pin LQFP (14x14 mm)
CPU Architecture ARM7TDMI-S ARM7TDMI-S
Maximum CPU Frequency 72 MHz 72 MHz
Flash Memory 256 KB 256 KB
SRAM Up to 58 KB 58 KB
Ethernet and USB Ethernet MAC and USB Device/Host/OTG Ethernet MAC and USB Device/Host/OTG
CAN Channels 2 channels 2 channels
ADC 8-channel, 10-bit 8-channel, 10-bit
Ordering Suffix LPC2366FBD100K LPC2366FBD100,551

جیاکەرەوە سەرەکییەکان

  • Broad integrated communications in one microcontroller (بەراورد بەLPC2366FBD100,551)
  • Memory configuration matches the LPC2366 family (بەراورد بەLPC2366FBD100,551)
  • Integrated mixed-signal and timing resources (بەراورد بەLPC2366FBD100,551)

تێبینییەکانی دیزاین

Use the NXP manufacturer datasheet pin table and package drawing to assign all connections on the 100-pin LQFP. Place the required input and output decoupling capacitors close to their corresponding power pins, provide a clean ground reference for the analog section, and route high-current or switching-node returns away from the 10-bit ADC and DAC. Review all peripheral multiplexing in the startup configuration so unused pins are not assigned conflicting functions.

Treat Ethernet and USB as controlled-impedance, high-speed interfaces rather than ordinary digital nets. Follow the NXP manufacturer layout guidance for trace lengths, return paths, layer transitions, and connector or magnetics placement. Keep clocks away from noisy analog and switching paths, maintain continuous ground references beneath high-speed traces, and use appropriate series termination where the application requires it. Validate the final stack-up with appropriate signal-integrity analysis.

Do not assume that identical device names make every ordering suffix interchangeable. Confirm temperature grade, packing method, delivery configuration, and lifecycle constraints for the exact LPC2366FBD100K code. Likewise, preserve the distinction between a functional alternative and a true footprint-compatible substitute: flash size, SRAM, peripheral population, pin multiplexing, voltage limits, and reset behavior must all match the intended design before a replacement is approved.

Plan the 3.0 V to 3.6 V supply rail so that voltage tolerance, startup current, peripheral loading, and Ethernet-interface requirements remain within the manufacturer limits. The 72 MHz ARM7 core and active communications peripherals can increase dynamic demand, so the regulator and decoupling network should have appropriate transient response. Separate sensitive analog filtering from digital switching paths and confirm power sequencing against the NXP manufacturer datasheet.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status must be confirmed for the exact NXP ordering code and current manufacturer product documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

LPC2366FBD100K datasheet LPC2366FBD100K datasheet pdf LPC2366FBD100K pinout LPC2366FBD100K equivalent LPC2366FBD100K replacement LPC2366FBD100K cross reference LPC2366FBD100K vs LPC2366FBD100,551 LPC2366FBD100K LQFP-100 footprint NXP LPC2366FBD100K LPC2366FBD100K price LPC2366FBD100K stock LPC2366FBD100K Ethernet USB CAN LPC2366FBD100K application circuit what is LPC2366FBD100K

پێکهاتە و زاراوە پەیوەندیدارەکان

NXP Semiconductors LPC2366FBD100K LPC2366FBD100 LPC2366FBD100,551 ARM7TDMI-S ARM7 embedded microcontroller 16/32-bit microcontroller microcontroller semiconductor 256 KB flash memory 58 KB SRAM 72 MHz Ethernet MAC USB Device USB Host USB OTG CAN bus DMA controller UART SSP/SPI I2C I2S 10-bit ADC 10-bit DAC 100-pin LQFP surface-mount package
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ