Analog Devices

MAX121CAP+ - 14-Bit 308ksps SAR ADC | Analog Devices

MPN: MAX121CAP+ ✓ چالاک
5V Vdss 20-pin SSOP Package 1.1MHz to 5.5MHz Speed
MOQ: 1 |

MAX121CAP+ گشتی

The Analog Devices MAX121CAP+ is a 14-bit successive-approximation analog-to-digital converter with one input, a 308ksps conversion rate, 78dB SINAD, and a 20-pin SSOP package. The device combines an on-chip track-and-hold circuit and a low-drift, low-noise buried-zener voltage reference in a complete BiCMOS serial-output converter.

An ADC converts an analog voltage into a numeric value for processing, storage, or control. The successive-approximation register, or SAR, architecture compares the sampled input against a generated reference through successive bit decisions. Within the broader ADC hierarchy, the MAX121 belongs to the precision SAR ADC category, combining sampled-data conversion with a serial interface suitable for DSP-controlled measurement systems.

The headline operating characteristics are 14-bit resolution, 308ksps throughput, and 78dB signal-to-noise-plus-distortion performance. A 20-pin SSOP package reduces board area compared with the older 16-pin DIP and SO options associated with the MAX121 family. The converter also accepts TTL- and CMOS-compatible clock and logic signals, supporting integration with both older DSP serial ports and CMOS control logic.

The MAX121 architecture is designed for low-power, low-noise measurement. Its integrated track-and-hold stage acquires the input voltage before conversion, while the buried-zener reference supplies a stable conversion reference on the same die. The serial interface can connect directly to the serial ports of popular digital-signal processors, reducing parallel-bus wiring and allowing compact instrumentation designs.

Typical uses include industrial process measurement, instrumentation, digital signal processing, data acquisition, and embedded control systems that require accurate sampling without a high-resolution parallel ADC. Its combination of 308ksps throughput and 78dB SINAD also makes it suitable for audio, communications, and laboratory signal-acquisition circuits when the system clock and serial interface are compatible.

The principal design consideration is clocking. The manufacturer specifies a 1.1MHz to 5.5MHz input-clock range for TTL- and CMOS-compatible operation. Confirm that the host DSP supplies a valid clock, correct serial framing, and the required acquisition timing. Input conditioning and reference bypassing should follow the application guidance in the manufacturer datasheet to preserve conversion accuracy and noise performance.

This product page combines the manufacturer's converter specifications, package and interface details, sourcing workflow, replacement analysis, and practical design guidance. It is intended to help engineers determine whether the MAX121CAP+ fits an existing 20-pin SSOP design before committing the part to a new PCB or production BOM.

جێگرەوەکانی جێگۆڕکێ بۆ MAX121CAP+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX121CAP+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Input Type, Number of Channels, Package.

Maxim Integrated
Input Type: Single Ended
Number of Channels: 1 Input
Package: 20-SSOP
بەراوردکردن لەگەڵ MAX121CAP+ →
Maxim Integrated
Number of Channels: 1 channel
بەراوردکردن لەگەڵ MAX121CAP+ →

MAX121EAP+

✅ جێگرەوەی ڕاستەوخۆ
Maxim Integrated
📦 20-pin SSOP
Successive-approximation ADC · 14 bit · 308ksps · 78dB SINAD · 5V · DSP interface · 1 channel · Industrial

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX121CAP+T

✅ جێگرەوەی ڕاستەوخۆ
📦 20-pin SSOP
Resolution is 14 bit versus 14 bit (0% difference), conversion class is SAR versus SAR (0% difference), and the package remains 20-pin SSOP; the T suffix changes the delivery ordering code

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX1142BCAP+T

✅ جێگرەوەی ڕاستەوخۆ
📦 20-pin SSOP
Resolution is 14 bit versus 14 bit (0% difference) and both use SAR conversion in a 20-pin SSOP; detailed SINAD and conversion-rate differences are not established

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX121CPA

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 20-pin SSOP
Same-family resolution of 14 bit, 308ksps conversion class, and 20-pin SSOP format; ordering-code qualification differs from MAX121CAP+

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX121EAP+

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Maxim Integrated
📦 20-pin SSOP
Successive-approximation ADC · 14 bit · 308ksps · 78dB SINAD · 5V · DSP interface · 1 channel · Industrial

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX121CAP+ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

وردی 14 bit
Conversion Rate 308ksps
Signal-to-Noise Plus Distortion 78dB
Architecture Successive-approximation register (SAR)
Input Channels 1 channel
Input Type Single-ended analog input
Process Technology BiCMOS
Output Interface Serial output
پاکێج 20-pin SSOP
Clock Frequency Range 1.1MHz to 5.5MHz
Logic Compatibility TTL- and CMOS-compatible
Sample-and-Hold On-chip track/hold
Internal Reference Low-drift, low-noise buried-zener voltage reference
Power Supply 5V
DSP Interface Direct serial interface to most popular DSP serial ports

ڕێنمایی ڕێکخستنی پینی MAX121CAP+ 20-pin ssop

ڕێکخستنی پین بۆ MAX121CAP+ (پاکێجی 20-pin ssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 20-pin ssop بۆ MAX121CAP+

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX121CAP+.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX121CAP+ گونجاوە بۆ 6 بەکارھێنانs: DSP-Based Data Acquisition, Industrial Process Measurement, Audio Signal Conversion, Laboratory Instrumentation, Communications Monitoring, Embedded Control Systems.

🖥️

DSP-Based Data Acquisition

The MAX121CAP+ fits DSP-based data acquisition because its serial output can connect directly to the serial port of most popular digital signal processors. Its 14-bit resolution preserves fine amplitude detail, while the 308ksps conversion rate supports rapid sampling of dynamic or multi-channel systems using external multiplexing. The 20-pin SSOP package also preserves board area compared with larger DIP packages. Design the serial clock within the specified 1.1MHz-to-5.5MHz range, and verify acquisition timing against the host processor latency. TTL- and CMOS-compatible logic simplifies connection to DSP serial ports, although correct data framing, chip-select behavior, and conversion-ready signaling must still be implemented.

🏭

Industrial Process Measurement

The MAX121CAP+ can digitize sensor and process-control signals where 14-bit accuracy, 78dB SINAD, and moderate sampling speed are more important than very high throughput. The on-chip track-and-hold circuit simplifies acquisition of changing analog inputs, while the low-drift buried-zener reference supports repeatable measurements without a separate reference device. Place suitable input filtering and protection ahead of the converter because the ADC does not replace signal conditioning. For thermocouple, bridge, pressure, or level sensing, validate the input range, settling behavior, reference noise, and grounding against the manufacturer datasheet before applying the converter directly to the sensor output.

🎧

Audio Signal Conversion

The MAX121CAP+ is applicable to audio digitization when 14-bit resolution and 78dB SINAD are sufficient for the system, such as monitoring, communications, or compact embedded audio equipment. Its 308ksps rate supports sampling well beyond the baseband requirements of many voice and control signals. The serial interface reduces parallel routing to a DSP, and the integrated low-drift reference helps establish a stable conversion baseline. In a practical audio path, the major trade-off is that the serial ADC is less convenient for isolated high-rate streaming than a dedicated audio codec. Use anti-alias filtering and a low-noise clock arrangement, and verify that the acquisition time supports the source impedance.

📡

Laboratory Instrumentation

The MAX121CAP+ is well suited to compact laboratory measurement equipment that needs accurate conversion without a wide parallel bus. The 20-pin SSOP footprint supports dense analog and digital sections, and the serial interface can share board routing with a DSP, microcontroller, or data logger. A 14-bit conversion provides 16,384 distinct codes across the selected input range, while the specified 78dB SINAD supports measurement quality better than an 8-bit converter. For instrument-grade results, account for analog front-end noise, reference decoupling, clock jitter, grounding, and calibration. The ADC should be placed behind buffered inputs when the source impedance could impede track-and-hold settling.

🌐

Communications Monitoring

The MAX121CAP+ can support communications monitoring and supervisory measurement functions where envelope, detector, or control signals must be sampled accurately. Its 308ksps throughput provides ample margin for many monitoring tasks, and the 14-bit resolution offers finer quantization than typical 8-bit or 10-bit control ADCs. The serial interface is advantageous in compact radio and network-adjacent modules because it reduces parallel routing to the digital controller. Clock quality becomes important when the monitored signal contains high-frequency content, so use a clean source and confirm the input bandwidth, anti-aliasing requirements, and acquisition time. The MAX121 should perform measurement rather than serve as a replacement for a dedicated RF converter.

🔧

Embedded Control Systems

The MAX121CAP+ fits embedded control and monitoring systems that need higher-resolution analog feedback than a typical microcontroller ADC provides. At 14 bits, the converter supplies substantially finer quantization than common 10-bit or 12-bit control channels, while 308ksps permits rapid updates of control and supervisory variables. The integrated track-and-hold and buried-zener reference reduce the number of external precision components. Designers should still compare the MAX121's serial clock and acquisition requirements with the selected controller's timing, and account for the finite settling time when driving the input from a resistive sensor network. Firmware must also handle the converter's serial output format and sample-ready timing correctly.

What is the operating voltage of MAX121CAP+?
The MAX121CAP+ operates from a 5V power supply. According to the Analog Devices manufacturer datasheet, the device is a BiCMOS, single-input, 14-bit serial-output ADC whose internal reference, track-and-hold circuit, and converter are integrated on one device. Keep the analog supply and digital interface rails within the limits defined in that datasheet, and provide the required bypass capacitors close to the power and reference pins.
What are the key specifications of MAX121CAP+ that engineers should know?
The MAX121CAP+ is a 14-bit, single-input SAR ADC with 308ksps conversion speed and 78dB SINAD in a 20-pin SSOP package. According to the Analog Devices manufacturer datasheet, it includes an on-chip track-and-hold stage, a low-drift buried-zener reference, TTL- and CMOS-compatible logic, and a serial interface intended for direct connection to DSP serial ports.
How fast does the MAX121CAP+ convert analog signals?
The MAX121CAP+ supports conversion rates up to 308ksps. According to the Analog Devices manufacturer datasheet, the converter uses a 14-bit successive-approximation architecture and accepts a TTL- or CMOS-compatible clock between 1.1MHz and 5.5MHz. Actual system throughput depends on acquisition timing, serial-output transfer, DSP processing, and any additional conversion-cycle overhead.
Where can I download the MAX121CAP+ datasheet PDF?
The official MAX121CAP+ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/MAX121.pdf. Use the manufacturer datasheet for the authoritative pin description, timing diagrams, electrical characteristics, reference requirements, and application information. The product landing page at https://www.analog.com/en/products/MAX121.html also links to supporting technical documentation.
Where can I find the MAX121CAP+ pinout?
The MAX121CAP+ pinout is shown in the pin-description and package-drawing sections of the official Analog Devices MAX121 datasheet. The target device is supplied in a 20-pin SSOP package. Use the datasheet's pin-description table when assigning nets and the package drawing for land-pattern geometry; connector names or neighboring-package conventions should not be substituted for the manufacturer pin assignments.
What can replace MAX121CAP+?
The closest identified replacements are the MAX121 family variants with the same 20-pin SSOP interface and the MAX1142BCAP+T, which is also listed as a 14-bit SAR ADC in a 20-pin SSOP. According to the available comparison records, both families use the same package format, but the MAX1142's detailed SINAD, clock, reference, and timing ratings must be checked against the MAX121 before accepting it as a drop-in replacement.
Is MAX121EAP the same as MAX121CAP+?
MAX121EAP and MAX121CAP+ are closely related MAX121 ordering options, and a comparison record identifies them as having consistent terminals and packages. The available technical summary confirms that the MAX121 family uses 20-pin SSOP packages, 14-bit conversion, and serial-output operation. Confirm temperature grade, lead-free status, clock timing, and full electrical limits in the manufacturer ordering information before treating either ordering code as interchangeable.
What is the best drop-in replacement for MAX121CAP+?
No cross-brand drop-in replacement is established by the available component information. MAX121EAP is the closest same-family SSOP option, while MAX1142BCAP+T is another 20-pin SSOP 14-bit SAR ADC identified by the comparison records. Neither should be treated as a guaranteed drop-in until reference voltage, acquisition time, clock frequency, serial timing, output coding, temperature range, and absolute maximum ratings are matched.
When should I choose MAX121CAP+ over another ADC?
Choose the MAX121CAP+ when the design requires a 14-bit single-channel SAR ADC with up to 308ksps conversion speed, 78dB SINAD, integrated reference, and a compact 20-pin SSOP footprint. Choose another converter only when its input architecture, reference, serial protocol, acquisition timing, environmental rating, or power requirements provide a clear advantage. The MAX121 is particularly appropriate for DSP-based instrumentation.
Is MAX121CAP+ suitable for DSP data acquisition?
The MAX121CAP+ is suitable for DSP data acquisition because its serial output can connect directly to the serial port of most popular digital-signal processors. According to the Analog Devices manufacturer datasheet, all logic inputs and outputs are TTL- and CMOS-compatible and the operating clock range is 1.1MHz to 5.5MHz. The host DSP must still support compatible clocking, framing, data-ready signaling, and serial transfer timing.
MAX121CAP+ vs MAX1142BCAP+T - which is better for a 14-bit acquisition system?
The MAX121CAP+ is the safer choice when 308ksps conversion speed, 78dB SINAD, a buried-zener internal reference, and a 1.1MHz-to-5.5MHz clock range are the governing requirements. MAX1142BCAP+T is also described as a 14-bit SAR ADC in a 20-pin SSOP, but its complete timing, noise, reference, and interface specifications are not established by the comparison record. Validate those parameters before substitution.
What is the difference between MAX121CAP+ and MAX121CAP+T?
The principal identified difference is the ordering and packaging suffix: MAX121CAP+T is explicitly listed as a 20-pin SSOP ADC, while MAX121CAP+ is the lead-free MAX121CAP ordering code without the reel qualifier. Both correspond to the same MAX121 14-bit, 308ksps converter family. Confirm the exact suffix, package orientation, temperature grade, and manufacturer ordering table for the assembly intended for production.
Where can I buy MAX121CAP+ online?
Use the Request a Quote form on this XAIPART product page to request MAX121CAP+ availability, lead time, minimum order quantity, and current commercial terms. The request should include the exact MAX121CAP+ suffix and the required SSOP package. Avoid substituting MAX121CAP+T without confirming that its packaging, orientation, and ordering-code requirements match the production design.
What is the price of MAX121CAP+?
The current commercial terms for MAX121CAP+ are provided through the Request a Quote form on this page. The form can return the applicable price, stock position, lead time, and minimum order quantity for the exact ordering code. Request a quote for MAX121CAP+ specifically, since MAX121 family ordering codes can differ in package, temperature grade, and reel or tube presentation.
What is the lead time and stock status for MAX121CAP+?
Current stock and lead-time status for MAX121CAP+ should be requested through the Request a Quote form on this XAIPART page. Include the exact MPN, required quantity, and preferred SSOP delivery format when submitting the request. This approach prevents a family-level stock statement from being mistaken for confirmed availability of the exact MAX121CAP+ ordering code.

داتای سەرچاوەی ئەندازیاری بۆ MAX121CAP+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose MAX121CAP+ when the design requires a single-channel 14-bit SAR ADC with up to 308ksps conversion speed, 78dB SINAD, an integrated buried-zener reference, and a compact 20-pin SSOP footprint. It is a strong fit for DSP-based instrumentation, process measurement, communications monitoring, and embedded control. MAX121EAP is the closest identified same-family alternative when its exact qualification and ordering codes satisfy the design. MAX121CAP+T shares the identified converter and package characteristics but adds a different delivery suffix, so it should be selected only for its intended assembly format. MAX1142BCAP+T offers the same stated 14-bit SAR format and 20-pin SSOP package, but choose it only after its conversion rate, SINAD, reference, clock range, serial timing, and absolute maximum ratings have been matched. No cross-brand drop-in replacement should be approved from package similarity alone.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX121EAP MAX121CAP+T MAX1142BCAP+T
Manufacturer Analog Devices Analog Devices Analog Devices Analog Devices
Package 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP
Resolution 14 bit 14 bit 14 bit 14 bit
ADC Architecture Successive-approximation register (SAR) Successive-approximation register (SAR) Successive-approximation register (SAR) Successive-approximation register (SAR)

جیاکەرەوە سەرەکییەکان

  • High conversion throughput in a compact serial ADC (بەراورد بەMAX1142BCAP+T)
  • Documented signal-to-noise-plus-distortion performance (بەراورد بەMAX1142BCAP+T)
  • Integrated low-drift reference and acquisition circuitry (بەراورد بەMAX1142BCAP+T)

تێبینییەکانی دیزاین

Keep the converter clock and serial interface traces short, use a continuous reference plane, and place the required bypass capacitors close to the supply and reference pins. The MAX121 accepts TTL- and CMOS-compatible signals, but timing margin still depends on clock edge quality and DSP output loading. Avoid routing the serial clock beside high-current switching nodes, and use a low-impedance source for the analog input so the on-chip track-and-hold circuit can settle accurately within the available acquisition interval.

Use the manufacturer package drawing for the 20-pin SSOP land pattern and confirm component orientation before fabrication. Place the ADC close to the analog source and decoupling network to minimize trace pickup and input settling time. Provide a quiet ground return for the reference and converter, and separate analog input routing from digital serial lines where possible. Review the footprint's exposed thermal and electrical requirements and solder-assembly profile against the exact ordering code before releasing production artwork.

Do not treat every MAX121 suffix as electrically and mechanically interchangeable without checking the ordering table. In particular, distinguish MAX121CAP+ from MAX121CAP+T and verify the required temperature grade and delivery format. Also avoid assuming that a 20-pin SSOP comparator is a drop-in replacement: reference voltage, acquisition time, clock range, serial timing, output coding, and absolute maximum ratings must all match. The MAX1142BCAP+T has the same stated resolution, SAR architecture, and package format, but its detailed ratings require separate verification.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The MAX121CAP+ ordering suffix and official documentation are available, but explicit RoHS, REACH, halogen-free, and conflict-minerals statements were not identified in the component records used for this page.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX121CAP+ datasheet MAX121CAP+ pinout MAX121CAP+ datasheet pdf MAX121CAP+ specifications MAX121CAP+ 14 bit ADC MAX121CAP+ 308ksps MAX121CAP+ 20 pin SSOP MAX121CAP+ equivalent MAX121CAP+ replacement MAX121CAP+ vs MAX1142BCAP+T MAX121CAP+ DSP interface Analog Devices MAX121CAP+

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices MAX121CAP+ MAX121EAP MAX121CAP+T MAX1142BCAP+T MAX121CPA MAX121EAP+ analog-to-digital converter ADC successive-approximation register SAR ADC precision ADC serial-output ADC BiCMOS track-and-hold circuit buried-zener voltage reference TTL-compatible logic CMOS-compatible logic signal-to-noise plus distortion SINAD 14-bit resolution 308ksps conversion rate 20-pin SSOP SSOP surface-mount package DSP serial interface
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ