MAX130CMH - 3.5-Digit Dual-Slope LCD ADC | Maxim Integrated
MPN: MAX130CMH ✓ چالاکMAX130CMH گشتی
An ADC converts an analog input voltage into a digital value for measurement, display, or system control. The MAX130CMH belongs to the dual-slope integrating ADC category, a converter type that uses an integrating and reference interval to measure input voltage. Within the broader semiconductor hierarchy, this device is a data-converter IC, an interface IC, and a signal-conditioning component for precision panel-meter and industrial measurement systems.
The integrated bandgap reference provides the conversion system with a stable internal reference rather than requiring a separate reference circuit. The seven-segment LCD configuration is intended for direct display of signed or unsigned measurement results, while the 3.5-digit format provides three integer digits and one fractional digit for a display range of 0000 through 1999. These characteristics suit instruments that prioritize readable panel-meter output rather than a high-speed data-conversion interface.
The MAX130CMH uses a dual-slope conversion architecture, which is well matched to low-rate instrumentation where accurate integration, straightforward scaling, and direct LCD presentation are more important than rapid sampling. Its parallel word-access output provides a digital result to a system controller, while the LCD driver section allows the measured quantity to be presented locally. The 44-pin square gull-wing QFP construction provides a conventional surface-mount footprint with accessible perimeter leads.
Typical uses include digital panel meters, process monitoring instruments, laboratory meters, temperature measurement panels, weighing-system displays, and industrial control interfaces. The integrated reference and LCD driver reduce the number of separate components needed for a standalone display instrument, while dual-slope conversion supports applications that do not require waveform acquisition or high-frequency sampling.
For new layouts, preserve the analog and digital grounding arrangement specified by the manufacturer and provide the required reference and input filtering. Check the complete pin description and reference schematic in the manufacturer datasheet before assigning external display and measurement circuitry. Confirm acquisition timing and display update requirements against the specified conversion rate for the target measurement range.
This page consolidates the available specifications, verified source links, package details, and application guidance into an engineering-oriented overview. It also distinguishes documented MAX130CMH variants and provides selection criteria for engineers evaluating the 44-QFP dual-slope LCD ADC family.
جێگرەوەکانی جێگۆڕکێ بۆ MAX130CMH — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX130CMH (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Converter Type.
MAX130CMH+
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX130CMH+T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX130CMH-T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX130CMH زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Converter Type | Dual-slope ADC |
| Display Resolution | 3.5 digits |
| Display Configuration | 7-segment LCD |
| Number of Functions | 1 function |
| Number of Channels | 1 channel |
| Digital Output Type | Parallel word access |
| Reference Type | Integrated bandgap reference |
| Process Technology | CMOS |
| Temperature Grade | Commercial |
| Terminal Form | Gull wing |
| Number of Terminals | 44 terminals |
| Package Code | QFP |
| Package Shape | Square |
| جۆری دامەزراندن | Surface mount |
| Lead-Free Status | Lead free for the MAX130CMH+T listed variant |
ڕێنمایی ڕێکخستنی پینی MAX130CMH square
ڕێکخستنی پین بۆ MAX130CMH (پاکێجی square). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX130CMH.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX130CMH گونجاوە بۆ 6 بەکارھێنانs: Digital Temperature Panel Meter, Process Pressure Display, Laboratory Digital Meter, Industrial Scale Display, Tank Level Indicator, Power Supply Test Instrument.
Digital Temperature Panel Meter
The MAX130CMH is well suited to a temperature panel because it combines a 3.5-digit conversion format, an integrated bandgap reference, and direct seven-segment LCD drive in one 44-QFP device. It can acquire a conditioned temperature-sensor signal, produce a parallel measurement result, and display the value locally. The dual-slope architecture is appropriate for slowly changing thermal signals, while the integrated reference reduces the need for a separate precision reference assembly. In a practical meter, protection resistors, an input filter, sensor excitation circuitry, and calibration trims remain external. Confirm the input range, reference accuracy, conversion interval, and display update timing against the manufacturer electrical tables before fixing component values.
پێشنیارکراو
Process Pressure Display
A pressure-monitoring instrument can use the MAX130CMH to convert a conditioned bridge or transmitter signal into a readable 3.5-digit LCD value. Its single-channel dual-slope conversion is suitable for pressure values that change more slowly than a high-speed sampling system requires, and the integrated bandgap reference supports a self-contained measurement chain. The 44-pin square QFP package leaves separate pins for the analog input path, digital result, reference network, and LCD outputs. For field equipment, add input clamping, surge protection, filtering, and calibration components. Verify input common-mode range and conversion timing in the manufacturer datasheet because those constraints determine whether additional conditioning is required.
پێشنیارکراو
Laboratory Digital Meter
The MAX130CMH can form the measurement and display core of a compact laboratory meter that emphasizes readable results over high-speed acquisition. Its 3.5-digit format supports a 0000-to-1999 display range, the integrated bandgap reference reduces external reference complexity, and the parallel output allows a microcontroller to log the same value presented on the LCD. The dual-slope conversion technique is appropriate for volts, current-derived voltage, resistance, and slow sensor measurements. A practical implementation should reserve space for input protection, calibration, stable excitation, and front-panel controls. Confirm whether the instrument needs an additional higher-resolution conversion stage for calibration or measurement accuracy beyond the displayed digits.
پێشنیارکراو
Industrial Scale Display
A weighing-system display can use the MAX130CMH to convert the slow voltage produced by a load-cell amplifier into a local numeric result. The 3.5-digit LCD format, integrated bandgap reference, and direct seven-segment drive suit compact commercial scales and counting panels. Because the load-cell signal changes comparatively slowly, dual-slope conversion is a sensible fit and avoids the complexity of a high-rate acquisition chain. The external signal path still requires low-noise excitation, input filtering, calibration storage, and protection against cable-borne transients. Use the parallel word output if a controller must log measurements or perform preset functions. Validate zero drift, input offsets, and conversion timing during calibration because these system errors may dominate the displayed resolution.
پێشنیارکراو
Tank Level Indicator
The MAX130CMH is appropriate for a tank-level panel where a level sensor produces a slowly changing analog voltage that must be shown to an operator. A 3.5-digit seven-segment display provides a clear numeric value, while the integrated bandgap reference and dual-slope conversion simplify the measurement path. The 44-QFP package supports direct connection to LCD segments and a parallel measurement bus for optional logging. Install transient suppression and filtering between long sensor cables and the analog input because industrial wiring can introduce noise and surge pulses. Confirm the sensor's excitation and output range, then calibrate zero and full scale in the finished enclosure. A suitable enclosure and front-panel design also help operators interpret the displayed level.
پێشنیارکراو
Power Supply Test Instrument
The MAX130CMH can provide the measurement and display function in a bench supply panel that reports output voltage or current-derived voltage. Its single-channel dual-slope conversion handles slow supervisory measurements, and the integrated bandgap reference reduces the number of precision components required around the display. The seven-segment LCD driver is useful where the measured value must remain visible without continuous controller activity, while the parallel result allows a microcontroller to implement peak hold or data logging. The front end should include input limiting and filtering because supply transients can exceed the converter's limits. Check conversion speed against the desired update interval and verify that the displayed range corresponds to the instrument's selected shunt or divider.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX130CMH — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX130CMH+ | MAX130CMH+T | MAX130CMH-T |
|---|---|---|---|---|
| Package | 44-QFP | 44-QFP | 44-QFP | 44-QFP |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Converter Type | Dual-slope ADC | Dual-slope ADC | Dual-slope ADC | Dual-slope ADC |
| Display Resolution | 3.5 digits | 3.5 digits | 3.5 digits | 3.5 digits |
| Number of Channels | 1 channel | 1 channel | 1 channel | 1 channel |
جیاکەرەوە سەرەکییەکان
- Integrated display-oriented conversion in one package (بەراورد بەMCP3424-E/SL)
- Direct seven-segment LCD presentation (بەراورد بەAD779JN)
- Local parallel measurement result for control and logging (بەراورد بەICL7106CPL+)
تێبینییەکانی دیزاین
Assign the analog input, reference network, digital outputs, and LCD drive connections directly from the manufacturer pin-description table for the selected suffix. Keep the input and reference traces away from LCD drive and digital-output routes, place bypass components at the appropriate supply pins, and provide a clear ground return for the measurement reference. Do not infer connections from the 44-pin QFP position alone because the individual pin names were not established in the retrieved records.
Treat the 3.5-digit display format as a display range rather than a complete statement of overall measurement accuracy. Offset error, reference accuracy, input noise, component tolerances, and layout leakage can reduce practical instrument performance. Build calibration into the analog or digital path, verify the gain and zero points over temperature, and include filtering for switches, relays, sensors, and long cables. Confirm conversion time so the display does not refresh faster than the measurement chain can settle.
Use a continuous ground plane where practical and route the sensitive analog input as a short trace away from display outputs and digital buses. Place input filtering and reference components close to their associated device pins, and keep LCD segment routes physically separate from the analog input. Check the exposed assembly and keepout requirements in the package drawing because the precise QFP variant and lead-pitch details were not identified in the available product records.
زانیاری پابەندبوون
A lead-free designation is explicitly associated with the MAX130CMH+T ordering variant, but compliance for the exact unsuffixed MAX130CMH cannot be inferred from that statement.