Maxim Integrated

MAX132EWG+ - 18-Bit 100 SPS ADC | Maxim Integrated

MPN: MAX132EWG+ ✓ چالاک
4.5 V Vdss 24-pin SOIC Package
MOQ: 1 |

MAX132EWG+ گشتی

The Maxim Integrated MAX132EWG+ is an 18-bit plus-sign, serial-output analog-to-digital converter with one pseudo-differential input, multi-slope integration, and a conversion rate up to 100 conversions per second. It operates from a 4.5 V supply and supports a ±512 mV full-scale input range with 2 µV per LSB resolution. The device is offered in a 24-pin SOIC package for surface-mount instrumentation, process-control, and precision measurement systems.

An ADC is an interface IC that converts an analog voltage into a digital code for processing, measurement, display, or control. The MAX132 belongs to the integrating ADC family, where continuous integration of the input voltage averages noise and rejects periodic interference. Its multi-slope integration architecture provides high-resolution conversion in less time than a standard integrating ADC while retaining the benefits of noise averaging.

Key features include 18-bit plus-sign resolution, a maximum conversion rate of 100 SPS, and a 4-wire serial interface. The ±512 mV pseudo-differential input range provides 1.024 V of total span around the selected reference relationship, while the specified 2 µV/LSB resolution establishes the converter’s nominal input increment. Operating temperature is specified from −40°C to +85°C for the industrial-grade ordering code.

The multi-slope conversion cycle integrates the analog input over multiple intervals and then measures the resulting reference charge. This architecture reduces the influence of input noise and periodic interference compared with single-slope measurement. The serial output supports a compact four-wire connection to a microcontroller or logic system, while the plus-sign output format preserves the polarity of measurements around the conversion range’s center.

Typical applications include industrial process transmitters, laboratory measurement instruments, sensor-interface modules, and embedded data-acquisition systems. Designers should size the input network and reference circuitry for noise, establish the correct common-mode relationship for pseudo-differential operation, and allocate sufficient timing between serial clock and data signals.

For PCB implementation, keep the input and reference paths compact, place their associated capacitors close to the device, and provide a continuous ground plane. Because conversion accuracy depends on reference quality and layout symmetry, use short traces and avoid routing sensitive analog nets beneath digital clocks or switching-supply nodes.

This page combines the manufacturer’s operating specifications, orderable family information, package details, comparison guidance, and practical PCB design notes. It also distinguishes genuine drop-in family options from devices with different packages so engineers can assess PCB compatibility before ordering a replacement.

جێگرەوەکانی جێگۆڕکێ بۆ MAX132EWG+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX132EWG+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Full-Scale Input Range, Resolution, RoHS Status.

Analog Devices
Package: 24-pin wide SOIC, gull-wing lead form
Resolution: 18 bit plus sign
RoHS Status: unknown
بەراوردکردن لەگەڵ MAX132EWG+ →
Maxim Integrated
Package: 24-pin SOIC Wide (WSOIC)
Full-Scale Input Range: ±512 mV (2 uV/LSB)
RoHS Status: Compliant
بەراوردکردن لەگەڵ MAX132EWG+ →

MAX132EWG-T

✅ جێگرەوەی ڕاستەوخۆ
Maxim Integrated
📦 24-pin SOIC
18-bit plus sign · Multi-slope integrating · 1 · ±512 mV (2 uV/LSB) · -9 V to +6 V (input protection range) · 100 conversions per second · 4-wire serial (SPI-compatible)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX132CWG+T

✅ جێگرەوەی ڕاستەوخۆ
📦 24-pin SOIC
18-bit resolution and 100 conversions/s are unchanged, giving a 0% difference in headline conversion performance; ordering suffix differs

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX132CWG+

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 24-pin SOIC
18-bit plus-sign, serial-output analog-to-digital converter · Multi-slope integration · 18 bit plus sign · 100 conversions/s · ±512 mV · 2 µV/LSB · 4-wire serial interface · 1 input

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX132EWG+ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

ADC Type Multi-slope integrating ADC
وردی 18-bit plus sign
Number of Inputs 1 input
Input Type Pseudo-differential
Conversion Rate Up to 100 conversions/s
Full-Scale Input Range ±512 mV
Input Resolution 2 µV/LSB
ڤۆڵتیەی دابینکردن 4.5 V
Serial Interface 4-wire serial interface
Output Format Plus-sign serial output
پلەی گەرمیی کارکردن −40°C to +85°C
پاکێج 24-pin SOIC
جۆری دامەزراندن Surface Mount
ژمارەی پینەکان 24 pins
Screening Level Industrial
Technology CMOS

ڕێنمایی ڕێکخستنی پینی MAX132EWG+ 24-pin soic

ڕێکخستنی پین بۆ MAX132EWG+ (پاکێجی 24-pin soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 24-pin soic بۆ MAX132EWG+

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX132EWG+.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX132EWG+ گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Laboratory Instrumentation, Precision Sensor Interface, Data Acquisition Modules, Medical Monitoring Equipment, Environmental Monitoring.

🏭

Industrial Process Measurement

The MAX132EWG+ fits process-measurement front ends that require 18-bit resolution but can operate at no more than 100 samples per second. Its ±512 mV pseudo-differential input range and 2 µV/LSB resolution suit scaled pressure, temperature, and level signals after suitable conditioning. Multi-slope integration helps average noise and periodic interference, while the four-wire serial interface connects the converter to a controller without a parallel data bus. The design must keep the input common-mode and reference relationship within the device’s operating limits, and filtering should be placed ahead of the ADC when the sensor source is noisy.

🔧

Laboratory Instrumentation

The MAX132EWG+ is suitable for laboratory instruments that acquire low-level analog measurements at moderate speed. The 18-bit plus-sign result preserves measurement polarity, while the ±512 mV input span accommodates conditioned outputs from sensors, bridges, or laboratory sources. At up to 100 conversions/s, the device favors stable slow signals rather than waveform capture. Designers should use a low-noise reference, shielded input routing, and input filtering matched to the desired bandwidth. The four-wire serial interface also simplifies connection to an embedded controller in bench instruments and automated test systems.

🧩

Precision Sensor Interface

The MAX132EWG+ can digitize outputs from bridge, resistive, and low-level voltage sensors when the conditioned signal fits within ±512 mV. Its 18-bit resolution provides a 2 µV/LSB conversion increment, and multi-slope operation improves rejection of noise that appears during the integration period. The pseudo-differential input arrangement is useful when the converter needs a defined relationship to the reference rather than two fully independent polarities. Practical implementations should place input conditioning close to the ADC, maintain symmetry between analog paths, and decouple the 4.5 V supply near the device.

📟

Data Acquisition Modules

The MAX132EWG+ is appropriate for compact data-acquisition modules that prioritize resolution and low conversion noise over high throughput. A single pseudo-differential channel and a four-wire serial interface reduce wiring complexity in distributed measurement nodes, while the 100 conversions/s limit aligns with temperature, pressure, and status monitoring. The 24-pin SOIC package supports compact board layouts, but careful grounding and reference layout remain essential. Use a stable reference source and local bypass capacitors, and separate analog input routing from digital clock and control traces to preserve conversion quality.

💊

Medical Monitoring Equipment

The MAX132EWG+ can be considered for low-frequency medical monitoring equipment when its input range, conversion speed, and system isolation strategy satisfy the application requirements. The 18-bit resolution and 2 µV/LSB increment are useful for small physiological or diagnostic signals after careful analog conditioning, while multi-slope integration reduces periodic interference. At 100 conversions/s, the converter supports monitoring signals rather than high-bandwidth imaging. Medical designs require separate evaluation of patient protection, leakage, applicable medical standards, calibration, and the reference network before production use.

🌐

Environmental Monitoring

The MAX132EWG+ is well matched to environmental monitoring nodes that sample changing sensor values such as temperature, humidity, gas concentration, or water level. The 100 conversions/s rate exceeds the needs of many slowly changing environmental variables, while 18-bit resolution retains detail in small analog changes. A pseudo-differential input can accept a suitably referenced sensor output, and the serial interface permits connection to a low-power embedded controller. Field reliability depends on careful input protection, stable references, filtering that rejects environmental switching noise, and a PCB layout that isolates the analog path from digital and radio-related circuitry.

What is the MAX132EWG+?
The MAX132EWG+ is a Maxim Integrated 18-bit plus-sign, serial-output ADC with one pseudo-differential input and a maximum conversion rate of 100 conversions per second. According to the MAX132 manufacturer product page, it uses multi-slope integration to obtain high-resolution conversions in less time than a standard integrating ADC. The device is packaged for surface mounting in a 24-pin SOIC configuration.
What are the key specifications of MAX132EWG+ that engineers should know?
The MAX132EWG+ combines 18-bit plus-sign resolution, a 100 conversions/s maximum rate, one pseudo-differential input, and a 4-wire serial interface. According to the MAX132 manufacturer product page, the input range is ±512 mV and the conversion resolution is 2 µV/LSB. Its stated operating supply is 4.5 V, and the industrial ordering information specifies operation from −40°C to +85°C in a 24-pin SOIC package.
What is the input voltage range of MAX132EWG+?
The MAX132EWG+ accepts a ±512 mV full-scale input range relative to its pseudo-differential input arrangement. The manufacturer describes 2 µV per LSB over that range. Because this is a pseudo-differential rather than a fully differential converter, the common-mode voltage and reference arrangement must be designed so both input pins remain within their permitted operating limits during every conversion.
How fast can MAX132EWG+ perform conversions?
The MAX132EWG+ supports conversions at up to 100 samples per second. According to the MAX132 manufacturer product page, multi-slope integration enables high-resolution operation without the longer cycle associated with a standard integrating ADC. In practice, the host controller must observe the conversion-complete signal and clock the four-wire serial interface at a rate compatible with the selected conversion timing.
Where can I download the MAX132EWG+ datasheet PDF?
The official MAX132 documentation is available through the Analog Devices product page at https://www.analog.com/en/products/max132.html. Select the MAX132 data sheet listed under the product documentation resources. The manufacturer identifies the document as Data Sheet Rev. 2. Use that document for the authoritative pin description, electrical characteristics, timing diagrams, and recommended application circuit.
Where can I find the MAX132EWG+ pinout?
The MAX132EWG+ pinout is located in the pin-description section of the official MAX132 Data Sheet Rev. 2. The device uses a 24-pin SOIC package and a four-wire serial interface. Assign PCB nets from the manufacturer’s numbered package drawing and pin-description table, including power, ground, analog input, reference, clock, data, and control functions, rather than inferring connections from generic ADC diagrams.
What is the difference between MAX132EWG+ and MAX132CWG+?
The MAX132EWG+ and MAX132CWG+ belong to the same MAX132 18-bit ADC family and share the manufacturer-defined 24-pin surface-mount package arrangement. Their published resolution is 18 bits and their maximum conversion rate is 100 conversions/s, so the headline conversion specifications differ by 0%. Their ordering suffixes identify different member codes; confirm temperature grade, shipment form, and ordering details against the manufacturer product-selection table before substituting one for the other.
MAX132EWG+ vs MAX132CWG+T - which is better for a new design?
Choose the member whose ordering suffix matches the required temperature grade and delivery format rather than selecting solely from the headline ADC specifications. Both MAX132EWG+ and MAX132CWG+T are identified as 18-bit, 100 conversions/s devices in the same 24-pin family, so their published resolution and conversion rate differ by 0%. For a new design, the deciding checks are the exact orderable code, operating-temperature requirements, package markings, and lifecycle availability.
When should I choose MAX132EWG+ over MAX132CWG+?
Choose MAX132EWG+ when its exact ordering suffix, operating-temperature range, package, and availability meet the production requirements. The manufacturer identifies both MAX132EWG+ and MAX132CWG+ as members of the same 18-bit, plus-sign ADC family operating to 100 conversions/s, so there is no resolution or speed advantage implied by the suffix alone. Review the MAX132 product-selection table and approved BOM before releasing a new revision.
Is MAX132EWG+ suitable for industrial sensor measurement?
The MAX132EWG+ is suitable for industrial sensor measurement when the input and reference signals fit its ±512 mV pseudo-differential range and the required signal-to-noise performance can be achieved in the implemented layout. Its multi-slope architecture, 18-bit resolution, 2 µV/LSB input increment, and specified −40°C to +85°C operating range support precision measurement. Sensor excitation noise, reference stability, grounding, and input filtering still require system-level analysis.
What can replace MAX132EWG+ on the same PCB?
The identified drop-in candidates are MAX132EWG-T, MAX132CWG+T, and MAX132CWG+ from the same MAX132 family and 24-pin SOIC platform. Their published resolution remains 18 bits and maximum conversion rate remains 100 conversions/s, matching the MAX132EWG+ headline performance. Confirm the exact ordering suffix, temperature grade, pin mapping, and lifecycle status before replacement because suffix changes can identify a different orderable member rather than a generic second source.
Is MAX132EWG+ the same as MAX132EWG-T?
The MAX132EWG+ and MAX132EWG-T are closely related MAX132 family members with the same 18-bit resolution, 100 conversions/s maximum rate, 24-pin SOIC format, and published operating range of −40°C to +85°C. The leading plus sign identifies the orderable member presented on this page. A direct substitution still requires confirmation of package markings, ordering code, and manufacturer lifecycle status.
What is the best equivalent for MAX132EWG+ from another manufacturer?
No verified cross-manufacturer drop-in equivalent for MAX132EWG+ was identified in the available replacement search. A true equivalent must preserve the 24-pin footprint, pin functions, 18-bit resolution, 100 conversions/s throughput, ±512 mV input range, 4-wire serial protocol, and supply requirements. Devices such as MAX13487 and MAX13085 use different packages or interfaces, so they are not suitable as unqualified drop-in replacements.
Where can I buy MAX132EWG+ and request a quote?
Use the Request a Quote form on this page to ask about MAX132EWG+ price, stock, minimum order quantity, and lead time. The form gives buyers a direct channel for current commercial information without inserting short-lived distributor prices into the technical description. Include your required quantity, shipment form, target date, and country so the quote can reflect the appropriate production terms.
How does the MAX132 multi-slope ADC architecture affect noise?
The MAX132 multi-slope architecture continuously measures the input over multiple integration intervals and averages the resulting response. According to the MAX132 manufacturer product page, this technique provides high-resolution conversion in less time than a standard integrating ADC and supports low conversion noise. The benefit is strongest when the reference is stable, the analog input is properly conditioned, and the PCB layout limits coupled noise around the ADC.
What environmental and compliance specifications apply to MAX132EWG+?
The published MAX132EWG+ specifications identify industrial screening and a −40°C to +85°C operating range. RoHS, REACH, AEC-Q100, lead-free, and halogen-free declarations are not established by the available product information, so they must be confirmed with the manufacturer or current material-compliance documentation. The ADC is not presented as an automotive-qualified AEC-Q100 device in the available ordering information.

داتای سەرچاوەی ئەندازیاری بۆ MAX132EWG+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose MAX132EWG+ for a new design that requires an 18-bit plus-sign ADC, a pseudo-differential ±512 mV input range, conversion rates no higher than 100 samples/s, and a 24-pin SOIC footprint. MAX132EWG-T is the closest identified ordering alternative for a qualified 24-pin SOIC design requiring the same industrial temperature range and headline conversion performance. MAX132CWG+T and MAX132CWG+ offer the same family resolution and speed, but their exact suffix-specific qualification and lifecycle conditions should be checked against the manufacturer’s product-selection table. No cross-manufacturer part was confirmed as a true drop-in replacement because equivalent pin functions, serial protocol, input range, and timing must all be preserved. For designs requiring faster acquisition, more channels, a fully differential input, or a different digital interface, treat these members as unsuitable and select a dedicated ADC rather than assuming functional interchangeability.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX132EWG-T MAX132CWG+T MAX132CWG+
Manufacturer Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package 24-pin SOIC 24-pin SOIC 24-pin SOIC 24-pin SOIC
Resolution 18-bit plus sign 18-bit plus sign 18-bit plus sign 18-bit plus sign
Conversion Rate Up to 100 conversions/s Up to 100 conversions/s Up to 100 conversions/s Up to 100 conversions/s
Input Type Pseudo-differential Pseudo-differential Pseudo-differential Pseudo-differential
Serial Interface 4-wire serial interface 4-wire serial interface 4-wire serial interface 4-wire serial interface
Number of Inputs 1 input 1 input 1 input 1 input

جیاکەرەوە سەرەکییەکان

  • High-resolution integration in a moderate-speed converter (بەراورد بەMAX132CWG+)
  • Single pseudo-differential input with preserved polarity (بەراورد بەMAX132EWG-T)
  • Compact four-wire serial interface (بەراورد بەMAX132CWG+T)

تێبینییەکانی دیزاین

Route the pseudo-differential input, reference, and ground returns as short and symmetric as practical. Keep the analog input network close to pins 1 and 2 where applicable, and avoid placing the sensitive input path beneath the serial clock, system clock, or switching-regulator nodes. A continuous ground plane helps control return currents, while separated analog and digital sections reduce coupling into the integration cycle.

Place the device’s recommended input and bypass capacitors directly beside their associated power pins. Use short, low-impedance supply traces and connect the bypass return to the nearest ground reference point. The converter operates from a 4.5 V supply, so verify that supply tolerance, startup behavior, and local decoupling satisfy the electrical limits in the MAX132 Data Sheet Rev. 2 before releasing the layout.

Control clock-edge and data-line loading to preserve valid four-wire serial communication. Terminate or isolate the clock source when traces become long, keep data routing away from the analog input and reference nodes, and observe setup and hold timing at the host device. Because each conversion integrates the analog signal, switching disturbances coupled into the input can affect the result even when the digital data itself remains valid.

Do not treat the pseudo-differential inputs as a pair of independent bipolar signal ports. Establish the intended common-mode voltage and reference relationship before applying external signals. Also confirm the exact orderable suffix, temperature grade, pin mapping, and package markings before substituting another MAX132 member. A matching resolution and conversion rate alone do not establish suitability for every production requirement.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The available product information identifies industrial screening and a −40°C to +85°C operating range. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer material-compliance documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX132EWG+ datasheet MAX132EWG+ datasheet pdf MAX132EWG+ pinout MAX132EWG+ specifications MAX132EWG+ equivalent MAX132EWG+ replacement MAX132EWG+ drop-in replacement MAX132EWG+ vs MAX132CWG+ Maxim Integrated MAX132EWG+ MAX132EWG+ price MAX132EWG+ stock MAX132 24-SOIC ADC MAX132 18-bit serial ADC MAX132 multi-slope ADC application

پێکهاتە و زاراوە پەیوەندیدارەکان

Maxim Integrated Analog Devices MAX132EWG+ MAX132EWG-T MAX132CWG+T MAX132CWG+ MAX132 analog-to-digital converter ADC multi-slope integration integrating ADC interface IC 18-bit plus-sign resolution pseudo-differential input 4-wire serial interface 100 conversions per second ±512 mV full-scale input 2 µV per LSB 4.5 V supply SOIC-24 QFN family surface-mount package industrial screening precision measurement sensor interface
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ