Analog Devices

MAX202ESE+ - Dual +5V RS-232 Transceiver | Analog Devices

MPN: MAX202ESE+ ✓ چالاک
+5 V Vdss 16-pin narrow SOIC Package
MOQ: 1 |

MAX202ESE+ گشتی

Analog Devices MAX202ESE+ is a dual RS-232 transceiver with two transmitters and two receivers, integrated charge-pump circuitry, and single +5 V operation in a 16-pin narrow SOIC package. The drivers maintain ±5 V EIA/TIA-232E output levels at data rates in excess of 120 kbps, while the receivers provide a compact interface between RS-232 equipment and CMOS logic.

An RS-232 transceiver is an interface IC that converts between single-ended CMOS logic signals and differential, bipolar RS-232 signals. RS-232 belongs to the broader interface IC category and is commonly used for serial data links in industrial control, instrumentation, communications equipment, and computer peripherals. The MAX202ESE+ integrates the charge-pump circuitry required to generate the positive and negative RS-232 voltage levels from one +5 V supply.

The MAX202ESE+ supports data rates in excess of 120 kbps and uses 0.1 µF external capacitors for charge-pump operation. Its integrated charge pump eliminates the need for a separate negative supply at the transceiver. The device provides two transmit channels and two receive channels, allowing two RS-232 links to be implemented in a compact circuit. These characteristics suit equipment that needs bidirectional serial communication without allocating space for discrete level-shifting circuitry.

Each receiver converts an RS-232 input into a CMOS-compatible output, while each driver converts CMOS logic into an RS-232 output with approximately ±5 V signaling. The Analog Devices MAX202 product page identifies the MAX202 family as supporting single +5 V operation and data rates above 120 kbps. Its industrial-temperature MAX202ESE+ ordering designation identifies the narrow-SOIC package used for compact industrial equipment layouts.

Typical uses include RS-232 ports in test and measurement instruments, industrial serial controllers, data acquisition equipment, and legacy peripheral interfaces. Two transmitters and two receivers allow simultaneous communication over two channels when the host logic supports that arrangement. In longer cables or electrically noisy installations, the transceiver provides the voltage translation required between low-voltage digital hardware and RS-232 equipment.

Place the 0.1 µF charge-pump capacitors close to their designated pins and provide a stable +5 V supply with low-impedance decoupling. Keep RS-232 driver outputs away from sensitive analog or high-speed digital traces, and use the receiver outputs only for compatible CMOS logic levels. The narrow SOIC package requires careful lead clearance when soldering near adjacent components.

This page combines the manufacturer specifications, package details, drop-in alternatives, comparison parameters, and practical RS-232 interface design guidance. It helps engineers evaluate the MAX202ESE+ as a dual-channel, +5 V RS-232 transceiver for compact industrial and instrumentation designs.

جێگرەوەکانی جێگۆڕکێ بۆ MAX202ESE+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX202ESE+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, Maximum Data Rate, ESD Protection, Transceiver Configuration.

Maxim Integrated
Product Type: Dual RS-232 transceiver interface IC
Package: 16-pin SOIC
Maximum Data Rate: In excess of 120 kbps
بەراوردکردن لەگەڵ MAX202ESE+ →
Analog Devices
Package: 16-SOIC, 0.154 in x 3.90 mm width
ESD Protection: 15 kV
Transceiver Configuration: 2/2 full RS-232
بەراوردکردن لەگەڵ MAX202ESE+ →
Analog Devices
Product Type: RS-232 line transceiver
Package: 16-pin SOIC
Maximum Data Rate: 120 kbps
بەراوردکردن لەگەڵ MAX202ESE+ →
Analog Devices
Product Type: 2/2 RS-232 transceiver
Package: 16-SOIC narrow
Maximum Data Rate: 120kbps
بەراوردکردن لەگەڵ MAX202ESE+ →
Analog Devices
Product Type: Dual RS-232 line transceiver
Maximum Data Rate: 120 kbps
ESD Protection: ±15 kV
بەراوردکردن لەگەڵ MAX202ESE+ →
Texas Instruments
Product Type: Dual RS-232 line driver and receiver
Package: 16-pin SOIC
Maximum Data Rate: 120 kbit/s
بەراوردکردن لەگەڵ MAX202ESE+ →

MAX202CDR

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 SOIC-16
Dual RS-232 line driver and receiver · 4.5 V to 5.5 V · 2 · 2 · ±15 kV pin-to-pin on serial-port connection pins, including ground · TIA/EIA-232-F · Electrical interface between asynchronous communication controller and serial-port connector · 16-pin SOIC

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX202CSE+

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Maxim Integrated
📦 SOIC-16
Dual RS-232 transceiver interface IC · +5 V · 2 · 2 · In excess of 120 kbps · ±5 V EIA/TIA-232E · 0.1 µF · EIA/TIA-232E

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX202EESE+

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Analog Devices
📦 SOIC-16
RS-232 line transceiver · 2 · 2 · +5 V · 120 kbps · ±15 kV HBM · EIA/TIA-232E and CCITT V.28 · 16-pin SOIC

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ST202ECDR

✅ جێگرەوەی ڕاستەوخۆ
📦 SOIC-16
Matches the +5 V supply and approximately 120 kb/s data rate, both within 0% of the stated core ratings; ESD and pin-level details require comparison.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX202ECPE

✅ جێگرەوەی ڕاستەوخۆ
📦 SOIC-16
Shares the +5 V dual RS-232 architecture and 120 kb/s-class performance, a 0% change in core ratings; verify ordering-code and package details before substitution.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX202ESE+ تایبەتمەندییەکان

Product Type Dual RS-232 transceiver
Number of Transmitters 2
Number of Receivers 2
ڤۆڵتیەی دابینکردن +5 V
خێرایی داتا In excess of 120 kbps
RS-232 Output Level ±5 V EIA/TIA-232E
Charge Pump Integrated
External Charge-Pump Capacitor 0.1 µF
Duplex Configuration Full duplex
پاکێج 16-pin narrow SOIC
جۆری دامەزراندن Surface mount
Operating Temperature Grade Industrial temperature
Automotive Qualification Not applicable

ڕێنمایی ڕێکخستنی پینی MAX202ESE+ 16-pin narrow soic

ڕێکخستنی پین بۆ MAX202ESE+ (پاکێجی 16-pin narrow soic). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 16-pin narrow soic بۆ MAX202ESE+

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX202ESE+.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX202ESE+ گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Control, Test and Measurement Equipment, Data Acquisition Systems, Legacy Peripheral Connectivity, Communications Equipment, Programmable Control Panels.

🏭

Industrial Serial Control

The MAX202ESE+ fits industrial serial-control equipment that uses a +5 V logic supply and RS-232 links. Its two transmitters and two receivers support two communication channels, while the integrated charge pump avoids a separate negative rail. According to the Analog Devices MAX202 datasheet, the drivers operate above 120 kbps under specified EIA/TIA-232E loading. The 16-pin narrow SOIC package conserves board area, although designers should preserve clearances for the RS-232 connector and charge-pump capacitors.

🔧

Test and Measurement Equipment

The MAX202ESE+ is suitable for test instruments that communicate with host computers or service equipment through RS-232. The integrated charge-pump circuitry derives bipolar transmit levels from a single +5 V supply, simplifying instrument power design. With data rates in excess of 120 kbps, the transceiver can support instrument-control protocols while its two transmit and two receive channels provide flexible port allocation. Place the 0.1 µF capacitors near the designated pins and isolate the driver outputs from sensitive measurement circuitry.

📊

Data Acquisition Systems

The MAX202ESE+ can bridge CMOS control logic to RS-232 data-acquisition modules, remote sensors, and laboratory peripherals. Its +5 V supply requirement integrates easily with digital control systems, and the integrated charge pump eliminates a negative supply rail at the transceiver. The dual transmitter and dual receiver arrangement can reduce connector count in multi-channel equipment. Signal integrity depends on proper grounding, short cable routing, compliance with RS-232 loading, and separation between outgoing driver edges and sensitive analog inputs.

🖥️

Legacy Peripheral Connectivity

The MAX202ESE+ provides a practical interface for embedded controllers communicating with legacy RS-232 peripherals. Two channels allow simultaneous use of independent command and data paths when the host equipment supports them. According to the Analog Devices MAX202 product page, the transmitters maintain ±5 V EIA/TIA-232E levels at rates in excess of 120 kbps when appropriately loaded. The narrow SOIC footprint suits compact interface sections, but system designers should verify logic thresholds and connector pin assignments before connecting older equipment.

🌐

Communications Equipment

The MAX202ESE+ is appropriate for portable or embedded communications equipment requiring RS-232 interoperability from a +5 V rail. The integrated charge pump reduces external power-conversion complexity, while the 120 kbps-class data rate covers many control and diagnostic protocols. The two transmitters and two receivers permit more than one port where board space is constrained. Designers should use the manufacturer reference circuit for decoupling and grounding and should account for RS-232 slew behavior when routing long cables.

🧩

Programmable Control Panels

The MAX202ESE+ suits programmable control panels and service interfaces that communicate with host systems over RS-232. A single +5 V supply powers the logic side and the integrated charge pump, which simplifies power-tree planning. The two full-duplex channels can support separate control and diagnostic paths. Since the 16-pin narrow SOIC package has closely spaced leads, PCB assembly requires adequate paste and solder masks, while the RS-232 traces should be routed away from clocks, sensors, and precision analog inputs.

What is the operating voltage of MAX202ESE+?
The MAX202ESE+ operates from a single +5 V supply. Its integrated charge-pump circuitry generates the positive and negative voltage levels required by the RS-232 drivers, so a separate negative power supply is unnecessary. According to the Analog Devices MAX202 datasheet, the device is intended for +5 V RS-232 transceiver operation.
What are the key specifications of MAX202ESE+ that engineers should know?
The MAX202ESE+ provides two transmitters, two receivers, and full-duplex RS-232 operation from one +5 V supply. According to the Analog Devices MAX202 datasheet, the drivers maintain approximately ±5 V EIA/TIA-232E output levels at data rates in excess of 120 kbps. The 16-pin narrow SOIC package also requires 0.1 µF external charge-pump capacitors.
Where can I download the MAX202ESE+ datasheet PDF?
The official MAX202 documentation is available on the Analog Devices product page through the linked manufacturer datasheet. The MAX202ESE+ ordering code identifies the industrial-temperature, 16-pin narrow-SOIC configuration. Use the manufacturer datasheet for the complete pin-description table, electrical characteristics, charge-pump capacitor arrangement, and recommended operating conditions.
Where can I find the MAX202ESE+ pinout?
The MAX202ESE+ pinout is shown in the Analog Devices MAX202 datasheet under the pin-description and package information. Because this page does not reproduce a verified pin-number table, use the manufacturer drawing when assigning PCB tracks. The device is packaged as a 16-pin narrow SOIC, designated SOIC-16 for package-library purposes.
How fast is the MAX202ESE+ RS-232 transceiver?
The MAX202ESE+ supports RS-232 data rates in excess of 120 kbps. According to the Analog Devices MAX202 product page, the drivers maintain ±5 V EIA/TIA-232E output levels when operated under the specified loading conditions. Actual system throughput can be lower when determined by the connected protocol, cable characteristics, and receiving equipment.
Does MAX202ESE+ need a negative supply?
No, the MAX202ESE+ does not require a separate negative supply. Its integrated charge-pump circuitry produces the bipolar voltage levels needed for RS-232 transmission from a single +5 V supply. According to the Analog Devices MAX202 datasheet, the design requires 0.1 µF external capacitors to support the integrated charge pump.
Is MAX202ESE+ suitable for industrial instrumentation?
The MAX202ESE+ is suitable for compact industrial serial interfaces that use +5 V power and RS-232 signaling. Its ordering code identifies the industrial-temperature version, and the package provides two transmitters and two receivers for dual-channel equipment. According to the Analog Devices MAX202 product page, operation is supported above 120 kbps under compliant loading.
What is the difference between MAX202ESE+ and MAX202CDR?
The MAX202ESE+ and MAX202CDR are presented as functionally equivalent RS-232 transceivers with the same core +5 V operation, 120 kbps-class performance, and 16-pin SOIC footprint. The MAX202ESE+ ordering designation identifies the industrial-temperature configuration. Confirm package dimensions, pin assignments, and operating limits against the relevant Analog Devices datasheet before substitution.
Is ST202ECDR a drop-in alternative to MAX202ESE+?
The ST202ECDR is identified in a direct MAX202ESE+ comparison as a +5 V RS-232 transceiver with a 16-pin SOIC package and approximately 120 kb/s operation. Those characteristics make it a candidate for pin-compatible design review. Verify the actual pin assignments, charge-pump capacitor connections, receiver thresholds, and ESD requirements in both manufacturers' datasheets before production use.
When should I choose MAX202ESE+ instead of MAX202CSE+?
Choose MAX202ESE+ when the equipment requires the industrial-temperature ordering option; choose MAX202CSE+ when commercial-temperature operation is sufficient. Both preserve the +5 V dual-transceiver architecture, the 120 kbps-class data rate, and the 16-pin SOIC footprint. The exact temperature limits should be checked in the Analog Devices datasheet for each ordering code.
What can replace MAX202ESE+?
Potential drop-in choices include the MAX202CDR, MAX202CSE+, MAX202EESE+, and ST202ECDR. Each candidate uses a 16-pin SOIC format and provides two-transmitter, two-receiver RS-232 operation near the MAX202ESE+'s +5 V and 120 kbps-class characteristics. Confirm pinout, temperature grade, ESD rating, capacitor values, and lifecycle status before approving a replacement.
Is MAX202ESE+ the same as MAX202CSE+?
No, MAX202ESE+ and MAX202CSE+ share the same 16-pin RS-232 transceiver architecture but use different ordering codes for operating-temperature class. The MAX202ESE+ is identified as the industrial-temperature option, while MAX202CSE+ represents the commercial-temperature version. Their electrical limits and qualified temperature ranges must be compared in the manufacturer datasheet.
Where can I buy MAX202ESE+ and check its lead time?
Use the Request a Quote form on this page to ask about MAX202ESE+ availability, lead time, order quantity, and shipment requirements. The form routes the request for an exact-order-code response without relying on changing marketplace inventory. Include the SOIC-16 industrial-temperature configuration when submitting the inquiry.
What is the price of MAX202ESE+?
Current MAX202ESE+ pricing is best obtained through the Request a Quote form on this page because commercial terms can change with quantity, availability, and order configuration. Provide the exact MAX202ESE+ MPN and required quantity. The form lets purchasing confirm the appropriate supply status before an order is placed.
Is MAX202ESE+ in stock?
Stock status should be confirmed through the Request a Quote form on this page using the exact MAX202ESE+ ordering code. Because supply can change quickly, purchasing should request the current quantity, manufacturer part number, and desired delivery date. This avoids making a stock assumption from a general family listing.
What application circuit considerations apply to MAX202ESE+?
Use a stable +5 V rail, place the required 0.1 µF charge-pump capacitors close to their designated pins, and follow the Analog Devices datasheet layout and grounding guidance. According to the MAX202 datasheet, the charge pump generates the bipolar RS-232 levels internally. The receiver outputs require compatible CMOS logic, while the transmitter outputs connect to the RS-232 lines.

داتای سەرچاوەی ئەندازیاری بۆ MAX202ESE+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MAX202ESE+ when the design needs a compact 16-pin SOIC dual RS-232 transceiver powered from +5 V, two transmitters, two receivers, and operation in the industrial-temperature ordering class. MAX202CDR is a strong same-footprint alternative when its ordering and qualification details satisfy the equipment requirements. MAX202CSE+ is appropriate when commercial-temperature operation is sufficient, while MAX202EESE+ is preferable when up to ±15 kV HBM ESD protection is needed. ST202ECDR offers a cross-brand option with the same core +5 V, dual-channel, 120 kb/s-class architecture, but its pin assignments, thresholds, capacitor network, and ESD behavior require direct comparison. For every alternative, verify the exact footprint, pinout, temperature range, lifecycle status, and charge-pump capacitor values before releasing a production PCB.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX202CDR MAX202CSE+ MAX202EESE+ ST202ECDR MAX202ECPE
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16
Brand Analog Devices Analog Devices Analog Devices Analog Devices STMicroelectronics Analog Devices
Supply Voltage +5 V +5 V +5 V +5 V +5 V +5 V
Data Rate In excess of 120 kbps 120 kb/s 120 kb/s 120 kb/s 120 kb/s 120 kb/s
Transmitter Channels 2 2 2 2 2 2
Receiver Channels 2 2 2 2 2 2
Charge-Pump Capacitor 0.1 µF 0.1 µF 0.1 µF 0.1 µF 0.1 µF 0.1 µF
Integrated Charge Pump Yes Yes Yes Yes Yes Yes

جیاکەرەوە سەرەکییەکان

  • Industrial-temperature MAX202 ordering option (بەراورد بەMAX202CSE+)
  • Single-chip dual-channel RS-232 conversion (بەراورد بەST202ECDR)
  • Compatibility with the established MAX202 family (بەراورد بەMAX202EESE+)

تێبینییەکانی دیزاین

Follow the Analog Devices MAX202 reference layout and place the required 0.1 µF charge-pump capacitors close to their designated pins. Keep the +5 V input and ground return paths short, and provide local high-frequency bypass capacitance at the supply entry. Accurate placement reduces charge-pump supply ripple and helps the transceiver maintain its specified ±5 V EIA/TIA-232E driver levels.

Route RS-232 driver outputs directly toward the connector and keep them away from receiver inputs, crystal circuits, reference voltages, and sensitive analog nodes. Driver transition edges can capacitively couple into nearby high-impedance traces even when the data rate is modest. A grounded keep-out area and short return-path arrangement can reduce susceptibility to common-mode noise and ground-current effects.

Do not assume every MAX202-family ordering code is interchangeable. Confirm the 16-pin SOIC footprint, pin assignments, temperature class, external capacitor values, and ESD requirements for the exact replacement. The MAX202E family can include ±15 kV HBM protection, while the original MAX202ESE+ rating must be established from its individual manufacturer documentation.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The MAX202ESE+ is an industrial interface IC and is not presented as an automotive-qualified AEC-Q100 product. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-02 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

max202ese datasheet MAX202ESE+ datasheet MAX202ESE+ datasheet pdf MAX202ESE+ pinout MAX202ESE+ equivalent MAX202ESE+ replacement MAX202ESE+ cross reference MAX202ESE+ vs ST202ECDR MAX202ESE+ application circuit MAX202ESE+ price MAX202ESE+ stock Analog Devices MAX202ESE+ MAX202ESE+ SOIC-16 RS232 MAX202ESE+ 120kbps MAX202ESE+ drop-in replacement

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices MAX202ESE+ MAX202 MAX202CDR MAX202CSE+ MAX202EESE+ MAX202ECPE ST202ECDR RS-232 transceiver RS-232 interface IC EIA/TIA-232E CMOS logic integrated charge pump full-duplex transceiver single +5 V operation 120 kbps data rate 0.1 µF charge-pump capacitor SOIC-16 narrow SOIC surface-mount package industrial instrumentation data acquisition equipment serial communications ESD protection semiconductor
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ