Texas Instruments

MAX211CDWG4 - 4/5 RS-232 Transceiver, 120kbps | Texas Instruments

MPN: MAX211CDWG4 ✓ چالاک
5 V Vdss 1 µA typical Id 28-pin SOIC, 300 mil Package
MOQ: 1 |

MAX211CDWG4 گشتی

Texas Instruments MAX211CDWG4 is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, operation to 120 kbit/s, and a 28-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for the commercial temperature range of 0°C to +70°C.

An RS-232 transceiver is an interface IC that combines voltage-conversion line drivers and receivers with a logic-level UART interface. The MAX211 family belongs to the hierarchy RS-232 transceiver → serial interface IC → interface IC → semiconductor. By converting between logic-level signals and RS-232 levels, it enables equipment with a serial UART port to communicate with peripherals, computers, industrial controllers, and other equipment using the TIA/EIA-232-F electrical interface.

Four driver channels support bidirectional serial links, while the five receiver channels provide additional receive capability. The MAX211CDWG4 operates to 120 kbit/s, making it suitable for moderate-speed data links rather than high-speed differential communications. Its 5 V supply operation is compatible with conventional 5 V logic systems, although the interface voltage levels remain RS-232 bipolar signals rather than CMOS levels.

The device provides ±15 kV HBM ESD protection on its RS-232 pins and meets or exceeds TIA/EIA-232-F and ITU V.28 requirements. Shutdown operation reduces supply current to a typical 1 µA, which helps conserve power when the interface is inactive. These protections and shutdown characteristics are important in industrial and commercial environments where cables can be exposed to electrostatic discharge or where predictable low-power operation is required.

Typical applications include RS-232 ports on industrial controllers, test equipment, data-acquisition systems, point-of-sale equipment, and embedded serial interfaces. The 28-pin SOIC package also supports conventional surface-mount assembly. Designers should account for RS-232's unbalanced signaling, cable-length limitations, ground-reference issues, and the need for suitable interface protection when connecting the device to external equipment.

Place the device close enough to the connector to minimize the unprotected length of the RS-232 traces. Use the pin-description table in the manufacturer datasheet when assigning signals and decoupling pins. If the system also uses RS-485, RS-422, or USB, select the corresponding interface IC rather than treating an RS-232 transceiver as a universal serial-port solution.

This page combines device specifications, replacement guidance, pin and application considerations, and parameter-level comparisons to support engineering selection and PCB implementation. Use the Request a Quote form for current commercial availability, lead time, and sourcing support.

جێگرەوەکانی جێگۆڕکێ بۆ MAX211CDWG4 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX211CDWG4 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە ESD Protection, Operating Temperature Range, Package, RoHS Status, Shutdown Supply Current.

Texas Instruments
ESD Protection: ±15 kV
Operating Temperature Range: -40°C to +85°C
Package: 28-pin SOIC
بەراوردکردن لەگەڵ MAX211CDWG4 →
Texas Instruments
ESD Protection: ±15 kV
Operating Temperature Range: -40°C to +85°C
Package: 28-pin SOIC
بەراوردکردن لەگەڵ MAX211CDWG4 →

MAX211IDW

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 SOIC-28 (300 mil)
5 V · 120 kbit/s · 4 · 5 · ±15 kV · ±9 V · 28-pin SOIC · -40°C to +85°C

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX211CDWG4 تایبەتمەندییەکان

Product Type Multichannel RS-232 line driver/receiver
Number of Drivers 4 channels
Number of Receivers 5 channels
Transceiver Configuration 4/5 full RS-232 transceiver
Nominal Supply Voltage 5 V
Operating Supply Voltage Range 4.5 V to 5.5 V
Maximum Data Rate 120 kbit/s
Shutdown Supply Current 1 µA typical
ESD Protection ±15 kV using Human-Body Model
RS-232 Compliance Meets or exceeds TIA/EIA-232-F requirements
ITU Compliance Meets or exceeds ITU V.28 requirements
مەودای پلەی گەرمیی کارکردن 0°C to +70°C
Temperature Grade Commercial
پاکێج 28-pin SOIC, 300 mil
Number of Terminals 28 terminals
Terminal Form Gull wing
Package Shape Rectangular
دۆخی RoHS RoHS compliant
Safe Operating Area Not applicable

ڕێنمایی ڕێکخستنی پینی MAX211CDWG4 rectangular

ڕێکخستنی پین بۆ MAX211CDWG4 (پاکێجی rectangular). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی rectangular بۆ MAX211CDWG4

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX211CDWG4.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX211CDWG4 گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Control Interface, Data Acquisition and Test Equipment, Point-of-Sale and Peripheral Connectivity, Embedded Equipment Communication, Communication and Networking Equipment, Legacy Port Modernization.

🏭

Industrial Serial Control Interface

The MAX211CDWG4 fits industrial equipment requiring several RS-232 channels on a common 5 V interface. Its four drivers and five receivers allow multiple UART links to be consolidated without redesigning the logic-side circuitry, while 120 kbit/s operation covers conventional control and monitoring traffic. The commercial 0°C to +70°C rating is appropriate when the controller remains inside a temperature-controlled enclosure. Its 1 µA typical shutdown current also helps conserve power when the serial interface is disabled. Designers should use the manufacturer pin descriptions to assign enable and channel functions, and should verify that cable length, grounding, and UART baud-rate tolerance meet the requirements of each industrial link.

🖥️

Data Acquisition and Test Equipment

The MAX211CDWG4 is useful in data-acquisition instruments and test systems that must connect a controller to legacy RS-232 equipment. The four driver channels support outbound control or measurement commands, and five receiver channels provide additional inputs for external instruments. At up to 120 kbit/s, the device accommodates many legacy serial configurations without requiring a high-speed differential interface. ±15 kV HBM protection and shutdown support improve robustness and power management in portable test equipment. Confirm the manufacturer electrical limits, use a stable 5 V supply, and validate the selected UART baud rate against the cable length and receiver characteristics before finalizing the instrument interface.

🔧

Point-of-Sale and Peripheral Connectivity

The MAX211CDWG4 can support multi-port RS-232 connectivity in point-of-sale terminals, receipt printers, scanners, and related peripherals. Four drivers and five receivers provide more channels than a basic single-port transceiver while preserving a straightforward 5 V UART architecture. The 120 kbit/s operating limit is suitable for many peripheral data rates, and the low-power shutdown state helps system designers isolate unused ports. Because RS-232 is an unbalanced interface, reliable operation also depends on proper signal grounding, cable routing, and protection at externally accessible connectors. The commercial temperature specification should be checked against the actual operating environment of the terminal or peripheral enclosure.

📱

Embedded Equipment Communication

The MAX211CDWG4 is appropriate for embedded systems that retain RS-232 compatibility while requiring more than one serial line. A host processor can use the logic-side driver and receiver connections to communicate with programming fixtures, service tools, or external controllers. The 4.5 V to 5.5 V operating range supports a regulated 5 V rail, and the 1 µA typical shutdown current is useful in intermittently powered service modes. Place the transceiver near the RS-232 connector so exposed traces remain short, and use the datasheet pin table for every channel assignment. The MAX211IDW provides the same family architecture where an industrial temperature range is required instead of the 0°C to +70°C commercial range.

🌐

Communication and Networking Equipment

The MAX211CDWG4 can provide management and configuration ports in communication equipment that still uses RS-232 rather than USB or Ethernet. Multiple drivers and receivers allow one controller to manage several subordinate devices, while 120 kbit/s operation covers typical administrative and control traffic. The device's shutdown function helps isolate the interface during inactive periods, and its documented ESD withstand level supports cautious use in externally accessed equipment. Signal integrity remains important because long or poorly grounded RS-232 cables can disturb received data. Keep connector-side routing compact, follow the manufacturer decoupling recommendations, and use the MAX211IDW when the equipment must operate across the industrial temperature range.

🔧

Legacy Port Modernization

The MAX211CDWG4 is useful when a modern controller must retain compatibility with legacy RS-232 equipment. Four driver channels and five receiver channels allow an adapter or embedded controller to bridge several serial functions without requiring separate single-channel transceivers. The 120 kbit/s limit supports many legacy control protocols, while the 5 V supply simplifies integration with conventional embedded logic. During modernization, verify that the legacy equipment uses RS-232 rather than RS-422, RS-485, or TTL serial levels, because electrical compatibility cannot be inferred from connector shape. Select the MAX211IDW when environmental requirements exceed the commercial 0°C to +70°C range of the MAX211CDWG4.

What is the MAX211CDWG4 and what does it do?
The MAX211CDWG4 is a 5 V RS-232 transceiver that combines four line drivers, five line receivers, and a shutdown function in a 28-pin SOIC package. According to the Texas Instruments datasheet, it operates to 120 kbit/s and converts between logic-level UART signals and RS-232 line levels. It is intended for industrial, commercial, test, and data-acquisition equipment requiring a multi-channel serial interface.
What are the key specifications of MAX211CDWG4 that engineers should know?
The MAX211CDWG4 provides four RS-232 drivers, five receivers, a 4.5 V to 5.5 V operating range, and a maximum data rate of 120 kbit/s. Its shutdown supply current is 1 µA typical, and its operating-temperature range is 0°C to +70°C. The manufacturer datasheet also specifies ±15 kV HBM ESD protection and compliance with TIA/EIA-232-F and ITU V.28 requirements.
What is the operating voltage of MAX211CDWG4?
The MAX211CDWG4 operates from 4.5 V to 5.5 V and is identified as a 5 V RS-232 interface IC. The Texas Instruments datasheet lists a nominal 5 V supply alongside this operating range. Designers should therefore provide a supply within those limits and use the decoupling and pin-configuration guidance in the manufacturer datasheet when implementing the device.
How fast is the MAX211CDWG4 RS-232 interface?
The MAX211CDWG4 operates up to 120 kbit/s, as specified by the Texas Instruments datasheet. This rate is suitable for conventional RS-232 UART links and equipment-control interfaces. The limit applies to the complete channel, so cable characteristics, receiver loading, grounding, baud-rate tolerance, and system timing must also be considered when establishing the practical operating rate.
Where can I download the MAX211CDWG4 datasheet PDF?
The MAX211CDWG4 datasheet PDF is available through the manufacturer-linked document page and the manufacturer product documentation. Use the Texas Instruments datasheet for authoritative pin descriptions, electrical characteristics, ESD limits, and recommended application circuits. The MAX211CDWG4 datasheet is also indexed by the AllDataSheet document page linked on this page, where the manufacturer PDF can be accessed.
Where can I find the MAX211CDWG4 pinout?
The MAX211CDWG4 pin assignments are shown in the pin-description table of the Texas Instruments datasheet. The component uses a 28-terminal gull-wing SOIC package with numbered pins arranged around the package perimeter. Use the manufacturer pin table to map supply, ground, driver outputs, receiver inputs, and shutdown control rather than inferring connections from transceiver conventions.
What is the best drop-in replacement for MAX211CDWG4?
The MAX211IDW is the closest documented drop-in candidate identified for the MAX211CDWG4 because it uses the same 28-pin SOIC family and provides the same four-driver, five-receiver MAX211 architecture. The primary documented distinction is the temperature grade: MAX211CDWG4 is commercial-grade, while MAX211IDW is the industrial-temperature option. Confirm every pin function and operating limit against the manufacturer datasheet before releasing a substitution.
Can MAX211IDW replace MAX211CDWG4 without changing the PCB?
The MAX211IDW can serve as a candidate replacement for the MAX211CDWG4 because both are 28-pin MAX211 RS-232 transceivers with the same four-driver and five-receiver architecture. The relevant tradeoff is operating-temperature range rather than package size. A design operating from 0°C to +70°C can retain the commercial-grade MAX211CDWG4, while the MAX211IDW is appropriate when the wider industrial temperature range is needed.
What is the difference between MAX211CDWG4 and MAX211IDW?
Both MAX211CDWG4 and MAX211IDW are 28-pin, four-driver, five-receiver RS-232 transceivers, but they target different temperature ranges. The MAX211CDWG4 is specified from 0°C to +70°C for commercial equipment, while the MAX211IDW is the industrial-temperature alternative. Check the complete electrical tables and pin descriptions before treating either device as a drop-in replacement.
When should I choose MAX211CDWG4 over MAX211IDW?
Choose the MAX211CDWG4 when the equipment operates within a 0°C to +70°C ambient range and the commercial temperature grade is sufficient. Choose the MAX211IDW when the same transceiver architecture and SOIC footprint are needed across the wider industrial temperature range. Both provide four drivers, five receivers, 120 kbit/s operation, and shutdown support, so temperature qualification is the central selection criterion.
Is MAX211CDWG4 suitable for industrial control and test equipment?
The MAX211CDWG4 is suitable for industrial-control or test equipment whose ambient temperature remains within 0°C to +70°C. Its 120 kbit/s limit, four drivers, five receivers, shutdown mode, and ±15 kV HBM ESD protection support practical RS-232 interface designs. Use the industrial-temperature MAX211IDW when the enclosure can experience temperatures outside the MAX211CDWG4 commercial range.
How should MAX211CDWG4 ESD protection be considered in a design?
The MAX211CDWG4 provides ±15 kV HBM ESD protection on the RS-232 interface, but system designers should still protect the complete cable and connector path. The manufacturer datasheet specifies the device-level HBM withstand level, not an unlimited immunity for every system configuration. Use appropriate chassis grounding, enclosure design, and any additional external protection required by the installation environment.
What is the shutdown current of MAX211CDWG4?
The MAX211CDWG4 draws a typical 1 µA of supply current in shutdown mode, according to the Texas Instruments datasheet. This low-current state supports power conservation when the RS-232 interface is not active. Confirm the shutdown-control polarity and timing requirements in the datasheet because the power-management behavior must be coordinated with the rest of the system.
Where can I buy MAX211CDWG4 online?
Use the Request a Quote form on this page to request current MAX211CDWG4 sourcing, commercial availability, lead time, and order quantities. The form provides a direct response channel for the exact Texas Instruments MAX211CDWG4 ordering code rather than a family-level or alternate-package listing. Include the required commercial grade and 28-pin SOIC configuration in your request.
What is the price and lead time of MAX211CDWG4?
Current price, stock, minimum order quantity, and lead time for the MAX211CDWG4 should be obtained through the Request a Quote form on this page. The manufacturer part is a 28-pin SOIC commercial-temperature device, so a quotation should identify MAX211CDWG4 exactly. Submit the required quantity and delivery location so the commercial response matches the intended configuration.
Is MAX211CDWG4 in stock and available for quotation?
The current stock position for MAX211CDWG4 can be requested through the Request a Quote form on this page. Availability can change with manufacturer inventory and order volume, so submit the exact MPN, required quantity, and target delivery date. This request also allows XAIPART to confirm the commercial-grade, 28-pin SOIC configuration and associated lead time.

داتای سەرچاوەی ئەندازیاری بۆ MAX211CDWG4 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MAX211CDWG4 when the design requires four RS-232 drivers, five receivers, operation to 120 kbit/s, and a commercial 0°C to +70°C temperature environment. Its 4.5 V to 5.5 V supply range, 1 µA typical shutdown current, and documented ±15 kV HBM protection make it suitable for controlled industrial, test, data-acquisition, and legacy-interface equipment. Select the MAX211IDW when the same MAX211 channel architecture and 28-pin SOIC format are required across the -40°C to +85°C industrial temperature range. The principal tradeoff is environmental coverage rather than package footprint: the MAX211CDWG4 targets commercial applications, while the MAX211IDW supports a wider operating range. Confirm pin assignments, channel usage, supply decoupling, and cable-side protection against the manufacturer datasheet before either part is released for production.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX211IDW
Brand Texas Instruments Texas Instruments
Package SOIC-28 (300 mil) SOIC-28
Product Type Multichannel RS-232 line driver/receiver Multichannel RS-232 line driver/receiver
Number of Drivers 4 channels 4 channels
Number of Receivers 5 channels 5 channels
Operating Supply Voltage Range 4.5 V to 5.5 V 5 V nominal
Maximum Data Rate 120 kbit/s 120 kbit/s
Operating Temperature Range 0°C to +70°C -40°C to +85°C
Temperature Grade Commercial Industrial

جیاکەرەوە سەرەکییەکان

  • Commercial-temperature MAX211 implementation (بەراورد بەMAX211IDW)
  • Four-driver, five-receiver channel count (بەراورد بەMAX211IDW)
  • 120 kbit/s operation with integrated shutdown (بەراورد بەMAX211IDW)

تێبینییەکانی دیزاین

Place the MAX211CDWG4 close to the RS-232 connector and keep the externally accessible driver and receiver traces short. Follow the manufacturer datasheet for supply decoupling and connect the designated ground pins directly to the ground plane. Avoid routing RS-232 traces beneath fast digital or switching-supply nodes, because the unbalanced interface can pick up crosstalk even when the UART data rate is moderate.

Operate the transceiver from a regulated 5 V rail within the specified 4.5 V to 5.5 V range. Use the decoupling configuration shown in the manufacturer application guidance and keep the supply-return path continuous. The typical shutdown current is 1 µA, but total system consumption also depends on the logic-side loads, external protection devices, and any pull components connected to the RS-232 pins.

Do not treat every D-sub or serial connector as an RS-232 interface. Verify that the external equipment uses bipolar RS-232 levels because the MAX211CDWG4 does not directly accept RS-422, RS-485, or TTL signals. Also account for RS-232 ground-reference offsets, cable length, baud-rate tolerance, and the 120 kbit/s maximum when designing the link.

Use a solid chassis or signal-ground strategy appropriate to the installation, especially when the RS-232 cable leaves the enclosure. Keep unprotected cable-side traces short and provide external surge or ESD protection when the port will be repeatedly connected or disconnected. Device-level HBM withstand does not remove the need to control EMI, cable transients, and ground loops in the complete product.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

RoHS compliance is identified in the product listing. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified.

داتا پشتڕاستکراوەتەوە لە: 2026-11-09 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX211CDWG4 datasheet MAX211CDWG4 pinout MAX211CDWG4 datasheet pdf MAX211CDWG4 equivalent MAX211CDWG4 replacement MAX211CDWG4 cross reference MAX211CDWG4 vs MAX211IDW Texas Instruments MAX211CDWG4 MAX211CDWG4 price MAX211CDWG4 stock MAX211CDWG4 120kbps RS232 MAX211CDWG4 SOIC-28 pinout MAX211CDWG4 industrial control interface MAX211CDWG4 application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments MAX211CDWG4 MAX211IDW RS-232 transceiver multichannel line driver/receiver serial interface IC interface IC semiconductor UART TIA/EIA-232-F ITU V.28 Human-Body Model HBM ESD protection SOIC-28 gull-wing package surface mount 4/5 transceiver 120 kbit/s shutdown mode 5 V supply industrial control data acquisition legacy RS-232 equipment
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ