Texas Instruments

MAX232IDR - 120 kbps Dual RS-232 Transceiver | Texas Instruments

MPN: MAX232IDR ✓ چالاک
4.5 V to 5.5 V Vdss 8 mA typical Id TIA/EIA-232-F and ITU Recommendation V.28 Rds(on) 16-pin SOIC Package
MOQ: 1 |

MAX232IDR گشتی

Texas Instruments MAX232IDR is a 5 V dual-channel RS-232 line transceiver with two drivers and two receivers, a maximum data rate of 120 kbit/s, and a 16-pin SOIC package. Its integrated charge-pump circuitry develops the positive and negative voltages required by the EIA-232 interface while the device operates from a single 4.5 V to 5.5 V supply.

An RS-232 transceiver is an interface IC that converts logic-level signals into bipolar RS-232 levels and converts incoming bipolar signals back into logic levels. Within the interface hierarchy, the MAX232 belongs to the RS-232 transceiver family of interface ICs used to connect modern digital equipment with legacy serial ports. It is especially useful where a UART provides TTL or CMOS logic but the peripheral expects true RS-232 signaling.

The MAX232IDR provides two transmit channels and two receive channels, making it suitable for implementing one or two complete point-to-point serial links. Its stated 120 kbit/s operating rate covers standard asynchronous serial communication, while the single-supply design simplifies PCB power planning. The manufacturer also identifies approximately ±9 V driver output levels and ±2 kV ESD protection as principal benefits of the MAX232 family.

Internally, the charge-pump voltage converter supplies the bipolar levels required by the drivers. Receivers tolerate RS-232 input levels down to ±30 V, allowing connected equipment to present stronger transients without immediately damaging the receive path. The manufacturer lists low supply current of approximately 8 mA typical, and the device is designed for interchangeability with the classic Maxim MAX232.

Typical applications include serial adapters, industrial control consoles, instrumentation, and embedded systems that communicate with RS-232 equipment through a UART. One receiver and driver can form a bidirectional data path when the transmit and receive lines are cross-connected; the second pair provides another channel or additional unidirectional interface. It is also useful when a legacy printer, controller, or service port requires RS-232 rather than TTL levels.

Designers should place the charge-pump capacitors close to the IC and route the RS-232 traces away from sensitive analog and high-speed digital signals. Decoupling near VCC reduces supply disturbance, while the receiver’s ±30 V input capability should not be confused with ±30 V output capability: the specified driver output is approximately ±9 V. Cable protection and grounding remain necessary for reliable operation with external equipment.

This page combines the manufacturer’s electrical specifications, ordering information, package details, cross-reference results, and practical implementation guidance. It also identifies same-footprint alternatives and explains the electrical distinctions that should be checked before replacing the MAX232IDR in an existing design.

جێگرەوەکانی جێگۆڕکێ بۆ MAX232IDR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX232IDR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Operating Temperature Range, Package, Product Type, Data Rate, ESD Protection.

Analog Devices
Operating Temperature Range: 0 °C to +70 °C (commercial C-grade)
Package: 16-pin Narrow SOIC (SOIC-N-16)
Data Rate: 120 kb/s
بەراوردکردن لەگەڵ MAX232IDR →
Texas Instruments
Operating Temperature Range: 0 C to 70 C
Package: 16-SOIC
Product Type: Dual RS-232 driver/receiver transceiver
بەراوردکردن لەگەڵ MAX232IDR →
Texas Instruments
Operating Temperature Range: 0 C to +70 C
Data Rate: 120 kbit/s
بەراوردکردن لەگەڵ MAX232IDR →
MaxLinear
Product Type: RS-232 line transceiver
ESD Protection: ±15 kV
MaxLinear
Operating Temperature Range: -40°C to +85°C
Product Type: RS-232 line transceiver

MAX232EIDR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Texas Instruments
📦 SOIC-16
Dual RS-232 line driver and receiver · 2 · 2 · 5 V · 120 kbit/s · ±9 V · ±30 V · 1.0 µF

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX232AIDR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 SOIC-16
Same 2/2 RS-232 configuration, 16-pin SOIC footprint, and 120 kbit/s class; no verified numerical functional difference stated

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX232CSE+T

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Analog Devices
📦 SOIC-16
RS-232 Line Driver/Receiver (Transceiver) · 2 · 2 · RS-232 (EIA/TIA-232E, V.28/V.24) · 4.5 V to 5.5 V (single +5V supply) · 120 kb/s · ±7.5 V minimum (typical ±9 V) into 3 kΩ load · ±30 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TRS232EIDWR

✅ جێگرەوەی ڕاستەوخۆ
📦 SOIC-16
Identified as a complete replacement with consistent terminals, package, and main functional characteristics; rated 4.5 V and 120 kbit/s class like the target

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

SP232EET-L/TR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
MaxLinear
📦 SOIC-16
RS-232 line transceiver · 2 · 2 · 4.5 V to 5.5 V · Yes, 5 V · ±15 kV Human Body Model · -40°C to +85°C · 16-pin SOIC

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SP232ECN-L/TR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
MaxLinear
📦 SOIC-16
RS-232 line transceiver · 2 drivers and 2 receivers · Single +5 V supply · 4.5 V to 5.5 V · ±15 kV · RS-232 and V.28 · CMOS/TTL · 0°C to 70°C

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX232IDR تایبەتمەندییەکان

Product Type Dual RS-232 transceiver
Transmitter Channels 2
Receiver Channels 2
Maximum Data Rate 120 kbit/s
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage 5 V
Driver Output Level Approximately ±9 V
Receiver Input Level Range ±30 V
ESD Protection ±2 kV
ئێستای دابینکردن 8 mA typical
Supported Standards TIA/EIA-232-F and ITU Recommendation V.28
پاکێج 16-pin SOIC
جۆری دامەزراندن Surface mount
Interface Standard RS-232 / EIA-232
Supply Configuration Single supply

ڕێنمایی ڕێکخستنی پینی MAX232IDR 16-pin soic

ڕێکخستنی پین بۆ MAX232IDR (پاکێجی 16-pin soic). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 16-pin soic بۆ MAX232IDR

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX232IDR.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX232IDR گونجاوە بۆ 6 بەکارھێنانs: Industrial UART-to-RS-232 Interface, Legacy Serial Adapter, Test and Measurement Instrumentation, Embedded Service Console, Printer and POS Equipment, RS-232 Signal Conditioning in Control Cards.

🏭

Industrial UART-to-RS-232 Interface

The MAX232IDR fits industrial control boards that expose a TTL or CMOS UART but must communicate with legacy RS-232 equipment. Its two drivers and two receivers support a complete bidirectional link when the transmit and receive conductors are cross-connected. Operating from a single 4.5 V to 5.5 V supply simplifies the interface power rail, while the receiver’s tolerance for ±30 V input levels provides margin against external line transients. The 120 kbit/s rate is suitable for conventional asynchronous service links. Designers should still verify industrial temperature requirements, add appropriate cable protection, and keep the interface ground connected according to the RS-232 system design.

🔧

Legacy Serial Adapter

The MAX232IDR is well suited to adding an RS-232 port to a modern controller whose UART uses logic-level signals. One driver and receiver pair can implement the bidirectional transmit and receive path, while the second pair can serve another port or a unidirectional status connection. The integrated charge pump generates the positive and negative voltages required by RS-232 from a 5 V supply, eliminating a separate negative rail. With a maximum rate of 120 kbit/s, it supports conventional UART traffic while reducing the component count compared with discrete level-shifting networks.

📺

Test and Measurement Instrumentation

The MAX232IDR can connect laboratory instruments and service equipment that retain RS-232 communication ports. Its two-driver, two-receiver arrangement supports instrument-control and diagnostic channels without requiring separate level-shifting circuits. The approximately ±9 V driver outputs comply with the bipolar signaling used by RS-232 equipment, while the receivers accept levels down to ±30 V. A 120 kbit/s data rate is appropriate for command and response traffic rather than high-rate bulk transfer. Place the interface capacitors close to the device, connect a suitable reference ground, and use shielded cable where the instrument can be exposed to electrically noisy environments.

🖥️

Embedded Service Console

The MAX232IDR enables an embedded processor or microcontroller to implement an RS-232 service console for configuration, diagnostics, or firmware commands. Two independent channel pairs provide useful flexibility: one pair can handle interactive communication while the other carries logging or equipment-control traffic. Its single 5 V supply architecture fits systems that already operate from 5 V, and the 120 kbit/s limit is more than adequate for typical character-oriented console sessions. Firmware should configure the UART baud rate and framing to match the connected equipment, while the hardware design must account for polarity, grounding, connector retention, and external transient protection.

🏭

Printer and POS Equipment

The MAX232IDR can provide the physical RS-232 layer for a printer, point-of-sale terminal, or receipt device connected to a UART-based controller. Two transmit and receive channels allow a main command channel and an auxiliary status channel, subject to the connected equipment’s wiring. The device’s 120 kbit/s capability supports conventional receipt and transaction traffic, and the integrated charge pump avoids a separate negative supply. For installations using long cables or unknown external equipment, add appropriately selected surge protection and maintain a common signal reference. Verify the connector’s signal assignment and logic polarity before enabling the transmitter to avoid an unusable but seemingly functional communication link.

⚡

RS-232 Signal Conditioning in Control Cards

The MAX232IDR is useful in modular control cards that must bridge modern logic to older RS-232 equipment while preserving a straightforward 5 V power architecture. Its dual-channel structure can reduce the number of level-conversion devices when two serial links are required. The receive path’s ±30 V input tolerance is particularly relevant to equipment with long exposed cables, although it does not eliminate the need for protection networks. The approximately ±2 kV ESD protection provides an additional design margin, but board layout remains important: keep charge-pump traces short, provide local supply decoupling, and maintain separation between RS-232 routes and sensitive analog or high-speed digital nets.

کورتەی بەرهەمە پێشنیارکراوەکان

TJA1057GTKZ NXP Semiconductors بەکارهێنراوە لە: Industrial UART-to-RS-232 Interface ADM485JRZ Analog Devices بەکارهێنراوە لە: Industrial UART-to-RS-232 Interface SP232EET-L/TR MaxLinear بەکارهێنراوە لە: Industrial UART-to-RS-232 Interface MAX3232IPW Texas Instruments بەکارهێنراوە لە: Legacy Serial Adapter, Printer and POS Equipment SP232ECN-L/TR MaxLinear بەکارهێنراوە لە: Legacy Serial Adapter STM32F103C8T6 STMicroelectronics بەکارهێنراوە لە: Legacy Serial Adapter, Legacy Serial Adapter TJA1442AT/0Z NXP Semiconductors بەکارهێنراوە لە: Test and Measurement Instrumentation ISO1042BDWR Texas Instruments بەکارهێنراوە لە: Test and Measurement Instrumentation MAX3070EESD+ Maxim Integrated بەکارهێنراوە لە: Test and Measurement Instrumentation STM32F103RCT6 STMicroelectronics بەکارهێنراوە لە: Embedded Service Console PIC24F16KL402-E/MQ Microchip Technology بەکارهێنراوە لە: Embedded Service Console USB2005-MV-01 Microchip Technology بەکارهێنراوە لە: Embedded Service Console SP485EMN-L/TR MaxLinear بەکارهێنراوە لە: Printer and POS Equipment ADM207ARZ Analog Devices بەکارهێنراوە لە: Printer and POS Equipment ISO122JUGR Isolated interface option for high-noise control cards بەکارهێنراوە لە: RS-232 Signal Conditioning in Control Cards SN65HVD05D Texas Instruments بەکارهێنراوە لە: RS-232 Signal Conditioning in Control Cards MAX3490EESA+ Analog Devices بەکارهێنراوە لە: RS-232 Signal Conditioning in Control Cards
What is the MAX232IDR datasheet?
The MAX232IDR datasheet is the Texas Instruments document for a 5 V, dual-channel RS-232 transceiver with two drivers, two receivers, a 120 kbit/s data rate, and a 16-pin SOIC package. The manufacturer’s product page identifies approximately ±9 V driver outputs and ±2 kV ESD protection. Use the MAX232 product page for the current ordering information and datasheet link, and consult the pin-description table and application circuit before assigning PCB connections.
What are the key specifications of MAX232IDR that engineers should know?
The MAX232IDR is a dual RS-232 transceiver designed for 5 V operation, with two driver channels, two receiver channels, and a maximum data rate of 120 kbit/s. Texas Instruments specifies a 4.5 V to 5.5 V supply range, approximately ±9 V driver output levels, receiver tolerance to ±30 V input levels, and approximately ±2 kV ESD protection. The integrated charge pump permits single-supply operation without a separate negative voltage source.
Where can I download the MAX232IDR datasheet PDF?
Download the MAX232IDR documentation from the Texas Instruments MAX232 product page linked on this page. The manufacturer page provides the current datasheet and product information for the MAX232 family, including the MAX232IDR ordering option. Search for the exact orderable MPN MAX232IDR when reviewing the ordering table, because temperature-grade, package, and shipping-option suffixes identify different orderable versions.
Where can I find the MAX232IDR pinout?
The MAX232IDR pinout is documented in the Texas Instruments MAX232 datasheet under the device pin-configuration and package-information sections. The part uses a 16-pin SOIC and separates the supply pins, charge-pump capacitor pins, receiver inputs and outputs, and driver outputs. Use the manufacturer pin-description table to assign nets because alternative parts may use different internal labels even when their external functions are equivalent.
What is the MAX232IDR used for?
The MAX232IDR converts low-voltage digital logic into bipolar RS-232 signals and converts incoming RS-232 signals into logic levels. It provides two drivers and two receivers for UART-based serial links. Typical uses include legacy serial adapters, industrial controllers, instrumentation, service equipment, and embedded systems whose UART operates at TTL or CMOS levels while the connected equipment requires an RS-232 interface.
Is the MAX232IDR a 3.3 V-compatible RS-232 transceiver?
The MAX232IDR is not specified for 3.3 V operation; Texas Instruments specifies a 4.5 V to 5.5 V supply range for this device. A 3.3 V UART can potentially communicate through a 5 V RS-232 transceiver only if its logic levels meet the receiver’s input thresholds, but that condition must be confirmed rather than assumed. Choose a transceiver explicitly rated for 3.3 V operation when the interface design requires a 3.3 V supply.
What is the difference between MAX232IDR and MAX232EIDR?
The MAX232EIDR is an enhanced member of the same MAX232 family and is commonly selected when greater ESD robustness is required. The exact ESD rating and any commercial versus industrial distinctions should be compared against the current Texas Instruments ordering information before substitution. Both devices use the 16-pin SOIC family and provide the core two-driver, two-receiver RS-232 function, but the enhanced variant should not be assumed equivalent solely from its similar name.
Can TRS232EIDWR replace MAX232IDR in an existing PCB?
TRS232EIDWR is identified as a pin-compatible replacement for the MAX232IDR in the cross-reference results, using the same 16-pin SOIC footprint and providing equivalent functional characteristics. Texas Instruments lists the MAX232IDR as a 2/2 RS-232 transceiver operating up to 120 kbit/s from a 4.5 V to 5.5 V supply. Confirm the replacement’s capacitor requirements, logic thresholds, temperature grade, and ESD rating against the schematic before production use.
When should I choose MAX232IDR instead of a 3.3 V RS-232 transceiver?
Choose the MAX232IDR when the board already has a reliable 5 V supply and the connected equipment requires a standard single-supply RS-232 interface. Its two drivers, two receivers, and 120 kbit/s capability are appropriate for conventional UART links. Select a 3.3 V-rated transceiver instead when the board power budget, voltage thresholds, or connector interface rules prohibit operating the surrounding logic and transceiver from 5 V.
Is MAX232IDR suitable for industrial equipment?
The MAX232IDR can be used in industrial serial interfaces when its operating temperature, protection level, and availability requirements satisfy the equipment specification. Its receiver input capability of ±30 V, approximately ±2 kV ESD protection, and 120 kbit/s rate are useful in electrically noisy environments, but they do not replace proper surge protection, isolation, shielding, and grounding. Use the manufacturer ordering table to verify the exact temperature grade.
Where can I buy MAX232IDR online?
Use the Request a Quote form on this page to request MAX232IDR availability, current pricing, and lead time for the required quantity and shipment destination. The form allows buyers to request the exact MAX232IDR orderable MPN without relying on a changing public price. Because availability and lead time vary with quantity, package form, and market conditions, request a firm allocation and delivery schedule with the quotation.
What is the price of MAX232IDR?
Current MAX232IDR pricing is obtained through the Request a Quote form on this page. The form is the appropriate route for a quantity-specific quotation and can account for the required package, delivery terms, and destination. Do not use a generic family price as a substitute for the exact MAX232IDR MPN, because suffix-specific orderable parts can differ in packaging, availability, and commercial terms.
What is the lead time for MAX232IDR?
Request the current MAX232IDR lead time through the Request a Quote form on this page, including your required quantity, target delivery date, and shipment location. Lead time is not a fixed attribute of the transceiver and can change with order volume, component availability, and replenishment conditions. A quotation request provides the most appropriate channel for confirming current allocation and a committed schedule.
Is MAX232IDR in stock?
Current MAX232IDR stock status should be confirmed through the Request a Quote form on this page. Supply availability can vary by order quantity, package shipment form, and customer location, so a general stock statement would not represent a guaranteed allocation. Include the quantity, target date, and delivery destination in the request to obtain an actionable availability response.
What can replace MAX232IDR?
The MAX232IDR can be replaced by pin-compatible 16-pin SOIC RS-232 transceivers that provide two drivers, two receivers, approximately 120 kbit/s operation, and compatibility with a 4.5 V to 5.5 V supply. Cross-reference results identify TRS232EIDWR as a complete replacement candidate, while other dual transceivers may fit the footprint. Verify pin functions, charge-pump capacitor values, logic thresholds, temperature grade, and ESD rating before approving a substitute.

داتای سەرچاوەی ئەندازیاری بۆ MAX232IDR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MAX232IDR for a 5 V board that needs two-driver, two-receiver RS-232 operation at up to 120 kbit/s and already uses the 16-pin SOIC footprint. MAX232EIDR is the logical same-family choice when the design specifically requires the enhanced ESD-rated version, while MAX232AIDR offers another same-footprint family option when its current ordering and temperature details meet the requirements. MAX232CSE may suit designs needing a different commercial or temperature-grade suffix, subject to qualification. TRS232EIDWR is attractive as a cross-reference-identified complete replacement when sourcing flexibility is important. SP232EET-L/TR and SP232ECN-L/TR can be evaluated for a new design when their thresholds, protection, and temperature ratings are confirmed. For every substitute, verify charge-pump capacitor values, UART logic levels, ESD rating, temperature range, and connector-side pin functions before releasing the PCB.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX232EIDR MAX232AIDR MAX232CSE TRS232EIDWR SP232EET-L/TR
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Transmitter Channels 2 2 2 2 2 2
Receiver Channels 2 2 2 2 2 2

جیاکەرەوە سەرەکییەکان

  • Direct same-family 16-pin SOIC replacement path (بەراورد بەTRS232EIDWR)
  • Two complete RS-232 channels in one package (بەراورد بەSP232EET-L/TR)
  • Single-supply bipolar interface generation (بەراورد بەMAX232CSE)

تێبینییەکانی دیزاین

Place the charge-pump capacitors and the VCC bypass capacitor directly beside their associated MAX232IDR pins, with short ground paths and no test pads or stubs between the capacitor pads and the device. The manufacturer application circuit should be used for the exact capacitor values. A long loop around the charge-pump pins can increase radiated emissions and make the supply disturbance visible on adjacent sensitive circuits.

Keep the RS-232 driver traces away from clocks, ADC inputs, crystal circuits, and low-level analog nodes. Route the connector-side nets as a compact RS-232 channel and provide a suitable chassis or signal-ground strategy according to the connected equipment. Although the receiver accepts input levels to ±30 V, that rating does not replace external surge protection when cables leave the enclosure.

Do not connect a TTL UART directly to the RS-232 connector, and do not apply RS-232 bipolar voltages directly to the logic-side receiver. The MAX232IDR requires the correct charge-pump capacitors, local supply decoupling, and a logic supply near 5 V. Also verify that transmit and receive conductors are crossed correctly at the D-sub connector and that the equipment shares a suitable ground reference.

The ±9 V driver transitions can contain fast edges and radiate noise even at a 120 kbit/s data rate. Use the shortest practical connection to the connector, maintain a continuous ground reference, and avoid splitting the interface ground. If the board combines RS-232 with sensitive analog circuitry, increase physical separation and place filtering near the connector rather than relying on the MAX232IDR’s approximately ±2 kV ESD rating as a complete EMC solution.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The MAX232 is a general-purpose RS-232 interface IC rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the cited product and search information and therefore remain unknown.

داتا پشتڕاستکراوەتەوە لە: 2026-11-02 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

max232idr datasheet MAX232IDR datasheet pdf MAX232IDR pinout MAX232IDR equivalent MAX232IDR replacement MAX232IDR cross reference MAX232IDR SOIC-16 pinout MAX232IDR 120 kbps MAX232IDR 4.5V 5.5V MAX232IDR RS-232 transceiver MAX232IDR vs TRS232EIDWR MAX232IDR price MAX232IDR stock Texas Instruments MAX232IDR MAX232IDR industrial UART interface

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments MAX232IDR MAX232EIDR MAX232AIDR MAX232CSE TRS232EIDWR SP232EET-L/TR SP232ECN-L/TR RS-232 transceiver EIA-232 interface IC UART interface charge-pump voltage converter TIA/EIA-232-F ITU Recommendation V.28 RoHS REACH SOIC-16 SOIC package family surface-mount package dual RS-232 120 kbit/s 4.5 V to 5.5 V supply ESD protection industrial communication
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ