MAX3095EPE+ - 10Mbps Quad RS-422/485 Receiver | ADI
MPN: MAX3095EPE+ ✓ چالاکMAX3095EPE+ گشتی
An RS-422/RS-485 receiver is an interface IC that converts differential serial-data signals into a logic-level output for a host controller. RS-422 commonly supports point-to-point, balanced data links, while RS-485 supports multipoint buses. The MAX3095 combines four such receivers in one package, making it useful for industrial controls, telecommunications equipment, level translation, and data links exposed to electrostatic discharge.
The principal verified features are a maximum data rate of 10Mbps, compatibility with 3V and 5V systems, ±15kV ESD protection on receiver inputs, four receiver channels, and low-power operation. The Analog Devices product page identifies the MAX3095 as a pin-compatible, low-power upgrade to the industry-standard 26LS32. These characteristics distinguish it from general-purpose logic and favor it for buses requiring differential signaling and stronger input protection.
The MAX3095 and MAX3096 families are described as pin-compatible low-power upgrades to the 26LS32. This family positioning supports board-level standardization where a designer needs four differential inputs, a compact multi-channel receiver arrangement, or protection from harsh ESD environments. Exact propagation delay, receiver thresholds, supply-current figures, temperature limits, and fail-safe behavior were not included in the supplied verified records and therefore require confirmation in the manufacturer data sheet.
Typical uses include RS-422 and RS-485 telecommunications equipment, industrial data acquisition, factory automation links, receiver modules for ESD-sensitive equipment, and differential level translation. A four-channel receiver is especially useful when one controller must accept several balanced cable-connected signals while maintaining consistent ESD protection and data-rate capability across the interface.
A key design consideration is PCB footprint. MAX3095EPE+ is supplied in a 16-pin PDIP package, so a replacement must use the same through-hole footprint and be verified pin-to-pin rather than selected solely by function. Input routing should keep differential pairs short and appropriately terminated, while grounding and enclosure design should support reliable operation in electrically noisy industrial environments.
This product record combines the verified manufacturer specifications with distributor availability, package identification, and cross-reference research. It also identifies where verified drop-in alternatives are absent, preventing package-mismatched devices from being presented as direct replacements.
جێگرەوەکانی جێگۆڕکێ بۆ MAX3095EPE+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3095EPE+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, Package.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەMAX3095EPE+ تایبەتمەندییەکان
| Receiver Configuration | Quad receiver |
| Number of Receiver Channels | 4 channels |
| Supported Standards | RS-422 and RS-485 |
| Maximum Data Rate | 10Mbps |
| Supply Voltage Options | 3V or 5V |
| ESD Protection | ±15kV |
| پاکێج | 16-pin PDIP |
| جۆری دامەزراندن | Through-hole |
| Power Class | Low-power |
| Production Status | Production |
| Reference Design | Industry-standard 26LS32 upgrade |
ڕێنمایی ڕێکخستنی پینی MAX3095EPE+ 16-pin pdip
ڕێکخستنی پین بۆ MAX3095EPE+ (پاکێجی 16-pin pdip). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3095EPE+.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX3095EPE+ گونجاوە بۆ 6 بەکارھێنانs: RS-485 Industrial Data Acquisition, RS-422 Telecommunications Equipment, Factory Automation Controller Interface, ESD-Sensitive Receiver Module, Differential Logic Level Translation, Rugged Remote Sensor Interface.
RS-485 Industrial Data Acquisition
The MAX3095EPE+ fits industrial acquisition systems that need up to four balanced RS-485 inputs on one interface card. Its four receiver channels can monitor several remote sensors, actuators, or controller signals while sharing one package, and the verified 10Mbps capability supports communication rates well above typical low-speed field-bus traffic. The ±15kV ESD protection is particularly useful in industrial environments where connected cables can expose the receiver to electrostatic discharge. Designers should provide correct differential routing and terminations, while confirming the MAX3095 electrical limits in the official data sheet before finalizing the input network.
RS-422 Telecommunications Equipment
The MAX3095EPE+ is appropriate for telecommunications equipment requiring multiple differential receive channels and protection against cable-connected ESD events. Four integrated receivers reduce the number of separate receiver packages needed when a line card must accept several balanced signaling inputs. The device supports 3V or 5V supply operation and data rates to 10Mbps according to the Analog Devices product page, allowing it to serve both legacy and higher-rate differential interfaces. Board designers should preserve the recommended signal geometry, provide the required interface grounding, and verify receiver thresholds and common-mode limits from the complete manufacturer data sheet.
Factory Automation Controller Interface
The MAX3095EPE+ can consolidate four RS-422 or RS-485 receiver channels in a factory automation controller, reducing the footprint needed for external line-receiver ICs. Its 10Mbps capability provides margin for factory data links, while ±15kV ESD protection adds resilience at connector-facing inputs where static discharge is a practical concern. The 16-pin PDIP package is particularly useful for legacy or maintenance-oriented controller boards that already define through-hole receiver footprints. Because the verified records do not include fail-safe behavior, propagation delay, or common-mode limits, those details must be checked before using the part in safety-related control paths.
ESD-Sensitive Receiver Module
The MAX3095EPE+ is suitable for a remote receiver module where several cable-connected differential inputs require ESD protection. The integrated ±15kV protection rating is the central verified benefit, while four receiver channels allow the module to handle multiple RS-422, RS-485, or compatible RS-423 inputs without using four separate line-receiver packages. Its 10Mbps maximum data rate supports high-speed communication links. Practical implementation still requires careful external network design, including suitable cable termination, controlled return paths, and a layout that avoids converting ESD events into excessive stress on any non-protected interface section.
Differential Logic Level Translation
The MAX3095EPE+ can act as a differential-to-logic receiver at the boundary between a balanced communications cable and a digital controller. Four channels allow one package to translate several RS-422, RS-485, or compatible RS-423 signals simultaneously, and the 3V/5V operating support offers flexibility for mixed-voltage digital systems. The family is described by Analog Devices as a low-power upgrade to the industry-standard 26LS32, making it useful when maintaining an established receiver architecture while adding ESD protection. Logic thresholds and supply sequencing must be checked in the manufacturer data sheet before using translation for high-speed or nonstandard input levels.
Rugged Remote Sensor Interface
The MAX3095EPE+ is well suited to remote sensor interfaces that combine several differential data lines with exposed cable connections. A 10Mbps receiver rate accommodates fast sensor data transfers, while four channels limit the number of packages required for multi-axis, multi-channel, or redundant measurement systems. The ±15kV ESD rating adds protection at the external interface, although it does not replace correct surge protection, isolation, shielding, or grounding. Because the verified information does not specify input impedance, common-mode range, or propagation delay, engineers should confirm those values and preserve the recommended differential trace geometry in the final layout.
داتای سەرچاوەی ئەندازیاری بۆ MAX3095EPE+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Receiver Configuration | Quad receiver |
| Number of Channels | 4 channels |
| Supported Standards | RS-422 and RS-485 |
| Maximum Data Rate | 10Mbps |
| Supply Voltage | 3V or 5V |
| ESD Protection | ±15kV |
| Package | 16-pin PDIP |
| Brand | Analog Devices |
| Power Class | Low-power |
| Production Status | Production |
| Price Reference | $4.87 manufacturer 1,000-unit starting list price; $5.8419 distributor price as of 2026-10-28 |
| Reference Positioning | Pin-compatible, low-power upgrade to the industry-standard 26LS32 |
جیاکەرەوە سەرەکییەکان
- Four differential receiver channels in one package (بەراورد بەMAX3095CSE+)
- 10Mbps differential receive capability (بەراورد بەMAX3095CEE+)
- ±15kV ESD protection on the receiver family (بەراورد بەIndustry-standard 26LS32)
تێبینییەکانی دیزاین
Route each differential input as a tightly coupled pair and keep the receiver circuitry close to the connector entry point where practical. Avoid switching or high-current return paths beneath the pairs, and provide a continuous reference plane where the board stackup permits it. The verified data confirms ±15kV ESD protection and a 10Mbps rate, but external layout still controls how much ESD or coupled noise actually reaches the receiver pins.
Do not substitute MAX3095CSE+, MAX3095CEE+, or another surface-mount family member directly for MAX3095EPE+ on an existing board. The target part uses a 16-pin PDIP footprint, while the verified comparisons identify narrow SOIC and QSOP-style alternatives. Confirm package dimensions, lead pitch, pin functions, and pin numbering before release. A functionally similar receiver can still be electrically or mechanically incompatible if the land pattern changes.
Use the receiver's specified termination and fail-safe network exactly as documented in the manufacturer data sheet rather than estimating values from cable length. The supplied records do not include input impedance, common-mode range, propagation delay, or threshold limits, so those missing values must be obtained before tuning an RS-422 or RS-485 interface. Preserve symmetry between the two conductors of each differential pair and keep stub lengths short.
Decouple the receiver supply locally and provide a return path that remains effective when external cables carry ESD current. The verified sources identify 3V/5V operation and low-power design but do not provide the supply-current values, so the complete data sheet is required to select capacitor voltage ratings and estimate total board power. Avoid routing connector-discharge currents through sensitive logic or the receiver ground reference.
زانیاری پابەندبوون
The supplied verified records describe production status and interface characteristics but do not provide definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for the MAX3095EPE+ ordering code. AEC-Q100 qualification is not indicated; this industrial communications interface is not treated as an automotive-qualified device.