MAX310CWN+ - 8-Channel RF Video Multiplexer | Analog Devices
MPN: MAX310CWN+ ✓ چالاکMAX310CWN+ گشتی
A multiplexer is a switching component that connects one signal path to one of several possible signal paths. An 8:1 RF/video multiplexer is therefore positioned between multiple source signals and a shared destination, allowing a system to select among eight inputs instead of duplicating downstream amplification and routing circuitry. This is useful in cameras, video test systems, measurement equipment, and other applications where the selected source must remain compatible with the connected receiver.
The MAX310CWN+ is identified as a single-channel, 8:1 analog multiplexer. Its CMOS implementation is intended for RF and video signal routing, where low-noise signal handling and predictable channel selection are important. The device is available in an 18-pin SOIC package, a surface-mount package that supports conventional PCB assembly and provides a practical option for compact analog switching systems.
The manufacturer product page lists the MAX310 as a production 8-channel CMOS RF video multiplexer and provides the product selection table, data sheet, sample and buy resources, and supporting documentation. The distributor listing describes the MAX310CWN+ as a video switch IC with one channel in an 18-SOIC package. Use the manufacturer data sheet for the exact electrical ratings, control logic, insertion loss, isolation, bandwidth, on-resistance, supply requirements, and pin-level truth table before finalizing a circuit.
In a typical design, the selected source is connected to the common output, while the eight input paths are driven by the source being tested or displayed. The device should be placed close enough to the controlled signal sources to minimize board-level interference and trace loss. Keep sensitive video or RF routing on controlled-impedance structures when signal integrity matters, and route control traces away from analog and RF paths where practical.
The main design consideration is verification of the exact MAX310CWN+ configuration, including supply voltage, control-pin polarity, and the pinout associated with the 18-SOIC package. Do not assume that a similar MAX310 order code has identical enable logic, pin assignment, or electrical limits. Consult the pin-description table and typical application circuit in the manufacturer data sheet when assigning PCB tracks.
This product page organizes the MAX310CWN+ identity, package information, sourcing guidance, alternatives, and application-oriented engineering notes. It is intended to help engineers locate the correct manufacturer documentation and make a documented replacement decision rather than relying only on a generic video-switch description.
جێگرەوەکانی جێگۆڕکێ بۆ MAX310CWN+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX310CWN+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type.
MAX310CWN
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX310CWN+T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX310EWN+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX310EWN+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX310MJE/883B
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX310CWN+ تایبەتمەندییەکان
| Product Type | 8-channel CMOS RF/video multiplexer |
| Multiplexer Configuration | Single 8:1 |
| Number of Channels | 8 channels |
| Signal Type | RF/video |
| Technology | CMOS |
| پاکێج | 18-SOIC |
| Package Type | SOIC |
| ژمارەی پینەکان | 18 pins |
| جۆری دامەزراندن | Surface mount |
| Production Status | Production |
ڕێنمایی ڕێکخستنی پینی MAX310CWN+ soic
ڕێکخستنی پین بۆ MAX310CWN+ (پاکێجی soic). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX310CWN+.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX310CWN+ گونجاوە بۆ 6 بەکارھێنانs: Video Source Selection, RF Signal Routing, Test and Measurement Systems, Video Cameras and Surveillance, Industrial Control Interfaces, RF and Video Lab Equipment.
Video Source Selection
The MAX310CWN+ fits video-source selection systems that need to route one of eight RF or video inputs into a shared display, capture, or analysis path. Its 8:1 architecture avoids duplicating the receiver chain across every source. Place the device near the source connections, keep traces short, and use the manufacturer data sheet to verify bandwidth, insertion loss, isolation, and control timing. The 18-SOIC package supports surface-mount assembly while requiring careful routing to preserve video quality.
پێشنیارکراو
RF Signal Routing
The MAX310CWN+ can be used when a compact RF system must select among eight signal sources. The single 8:1 topology provides a common route while reducing the number of downstream receivers, amplifiers, or analyzers. Designers should verify frequency range, on-resistance, insertion loss, off isolation, and control behavior against the official MAX310 data sheet. Controlled-impedance routing and a continuous ground reference are important when the selected path carries high-frequency energy.
پێشنیارکراو
Test and Measurement Systems
The MAX310CWN+ fits instrumentation that switches among multiple test sources while sharing a measurement front end. Eight inputs can be presented through one multiplexer, simplifying sequencing and reducing duplicated analog channels. The design must account for channel-to-channel isolation, insertion loss, and the exact select-input truth table. Use short traces, local bypassing, and a clean ground plane, then characterize the assembled fixture if precise amplitude measurements are required.
پێشنیارکراو
Video Cameras and Surveillance
The MAX310CWN+ is applicable to camera and surveillance systems that need to select among multiple video sources before downstream processing. Its CMOS RF/video multiplexer function supports compact routing in an 18-SOIC surface-mount package. Confirm that the input bandwidth and isolation meet the camera's video standard, and keep the analog path away from switching and digital return currents. The maximum channel count allows eight sources to share one processing chain without eight complete receiver sections.
پێشنیارکراو
Industrial Control Interfaces
The MAX310CWN+ can support industrial systems that select one of eight external RF or video signals for centralized monitoring. Its 8:1 architecture helps preserve a common downstream control and inspection path. The design should use the exact pin-description table for control polarity and supply connections, and should verify operating-temperature and isolation requirements for the deployment environment. PCB layout should minimize loop area and prevent noisy control traces from coupling into the selected analog path.
پێشنیارکراو
RF and Video Lab Equipment
The MAX310CWN+ fits laboratory equipment requiring flexible selection among eight RF or video inputs. A common output can feed an analyzer, display, or receiver while the operator or control system selects the required source. For accurate measurements, review the official data sheet for bandwidth, insertion loss, isolation, and on-resistance, and account for PCB parasitics in the signal path. The 18-SOIC package makes the device practical for a compact instrument front panel or internal routing board.
پێشنیارکراو
داتای سەرچاوەی ئەندازیاری بۆ MAX310CWN+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX310CWN | MAX310CWN+T | MAX310EWN | MAX310E | MAX310MJE/883B |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Function | CMOS RF/video multiplexer | CMOS RF/video multiplexer | CMOS RF/video multiplexer | Related MAX310 RF/video multiplexer | MAX310-family RF/video multiplexer | MAX310-family RF/video multiplexer |
| Technology | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
| Ordering or Qualification Variant | MAX310CWN+ | Base order code | T/R order-code form | MAX310E order-code variant | Base MAX310E order code | MAX310MJE/883B qualification suffix |
جیاکەرەوە سەرەکییەکان
- Single 8:1 routing in one 18-SOIC device (بەراورد بەMAX310EWN)
- Direct fit to the documented MAX310CWN package family (بەراورد بەMAX310CWN+T)
- Production status on the official manufacturer page (بەراورد بەMAX310MJE/883B)
تێبینییەکانی دیزاین
Place the MAX310CWN+ close to the source connectors or controlled signal origins and keep the eight input routes and common output electrically short. Use a continuous ground reference and route control traces separately from RF or video paths. Before layout release, verify the 18-SOIC pin names, supply connections, and select-input truth table in the manufacturer data sheet.
Treat the multiplexer as part of the complete signal path rather than as an ideal switch. Confirm the applicable bandwidth, on-resistance, insertion loss, and off-isolation limits for the intended frequency and video amplitude. If the path is sensitive, use controlled-impedance routing, minimize stub effects, and validate channel-to-channel crosstalk on the assembled PCB.
Use the supply voltage and decoupling arrangement specified by the manufacturer. Place bypass capacitors close to the device's supply and ground pins, keep their return current within a compact loop, and avoid sharing high-current return paths directly beneath sensitive RF or video traces. The exact capacitor values and permissible supply range are not stated in the available snippets, so use the official data sheet before finalizing the power network.
Do not substitute another MAX310 order code solely because it has a similar description or package. Compare pin assignment, control polarity, supply voltage, bandwidth, on-resistance, insertion loss, isolation, operating temperature, and qualification requirements. The MAX310CWN, MAX310CWN+T, and MAX310EWN listings identify close family candidates, but each requires direct manufacturer-document validation before it is approved as a drop-in replacement.
زانیاری پابەندبوون
The available manufacturer and distributor snippets do not state the target part's compliance status. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation for the exact MAX310CWN+ order code before release.