MAX3221EUE+T - 1/1 RS-232 Transceiver | Analog Devices
MPN: MAX3221EUE+T ✓ چالاکMAX3221EUE+T گشتی
An RS-232 transceiver is an interface IC that translates between logic-level signals and the voltage levels used by RS-232 equipment. The transmitter converts a low-voltage digital signal into the bipolar voltage swing required by the RS-232 standard, while the receiver converts the incoming bipolar signal back into a logic-level output. Within the product hierarchy, the MAX3221EUE+T is an RS-232 transceiver, a serial-interface IC, and a member of the broader interface and semiconductor categories.
The principal device characteristics are its 120 Kbps data rate, one transmit channel, one receive channel, 3.0 V to 5.5 V operating supply range, and 16-pin TSSOP package. Analog Devices describes the MAX3221 family as using AutoShutdown to reduce supply current to approximately 1 µA when no valid receiver signal is present. This low-power behavior is useful in battery-operated and intermittently connected systems where a permanently powered interface would otherwise waste energy.
The MAX3221 family differs from the larger MAX3223 and MAX3243 devices in channel count and package size. The MAX3221 provides one driver and one receiver in a 16-pin package, making it appropriate for point-to-point links, while the MAX3223 and MAX3243 support multiple channels. AutoShutdown allows the interface to remain attached to a connector while reducing current consumption during inactivity, provided the system uses the shutdown and wake-up control functions as described by the manufacturer.
Typical uses include industrial serial adapters, point-of-sale equipment, instrumentation, data acquisition systems, embedded control consoles, and maintenance interfaces. The single-channel arrangement is well suited to a local host port or service connector. For designs using a longer cable or a noisy industrial environment, the circuit should also consider connector grounding, cable length, signal polarity, and the ESD protection requirements of the complete system rather than relying on the transceiver alone.
For layout, place the transceiver close to the RS-232 connector and keep the charge-pump, bypass-capacitor, driver, and receiver paths compact. Keep sensitive logic traces away from the switching node of the internal charge pump. Decouple the supply pins locally, use the package pin definitions in the manufacturer datasheet, and confirm external protection requirements for the connector and cable environment.
This page consolidates the manufacturer family information, verified distributor listings, package details, compatible interface alternatives, and practical design guidance into one engineering reference. It also distinguishes documented performance from parameters that require confirmation in the complete datasheet before a new PCB is released for production.
جێگرەوەکانی جێگۆڕکێ بۆ MAX3221EUE+T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3221EUE+T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Supply Voltage Range, AutoShutdown Supply Current, ESD Protection, Maximum Data Rate, Package.
MAX3221EEUE+T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3221ECAE+T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ICL3221EIAZ-T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ICL3221EIVZ
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX3221EUE+T تایبەتمەندییەکان
| Transceiver Configuration | 1 transmitter and 1 receiver |
| خێرایی داتا | 120 Kbps |
| Supply Voltage Range | 3.0 V to 5.5 V |
| ئێستای دابینکردن | 1 A maximum |
| Interface Standard | RS-232 |
| Driver and Receiver Count | 1/1 |
| پاکێج | 16-pin TSSOP |
| جۆری دامەزراندن | Surface Mount |
| AutoShutdown Supply Current | Approximately 1 µA for the MAX3221 family |
ڕێنمایی ڕێکخستنی پینی MAX3221EUE+T 16-pin tssop
ڕێکخستنی پین بۆ MAX3221EUE+T (پاکێجی 16-pin tssop). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3221EUE+T.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX3221EUE+T گونجاوە بۆ 6 بەکارھێنانs: Point-to-Point Industrial Serial Console, Point-of-Sale Terminal Interface, Data Acquisition and Instrumentation, Embedded Controller Maintenance Port, RS-232-to-TTL Serial Adapter, Battery-Powered Field Test Equipment.
Point-to-Point Industrial Serial Console
The MAX3221EUE+T fits a point-to-point service console because it combines one RS-232 driver and one receiver in a compact 16-pin TSSOP package. Its 120 Kbps rate is appropriate for configuration commands, diagnostic logs, and legacy controller traffic. The device operates from 3.0 V to 5.5 V, allowing the interface to share either 3.3 V or 5 V system rails. In a service-port design, place the transceiver near the connector, decouple the supply locally, and route the charge-pump section away from sensitive logic. Confirm connector grounding and add protection appropriate to the exposed cable environment.
پێشنیارکراو
Point-of-Sale Terminal Interface
The MAX3221EUE+T is well suited to a point-of-sale terminal or peripheral interface that uses one full-duplex RS-232 link. Its single-driver, single-receiver organization avoids the footprint and cost of a multi-channel transceiver, while the 3.0 V to 5.5 V supply range supports common embedded logic rails. The 120 Kbps maximum data rate supports command exchanges and receipt-data transfer without demanding the performance of the 250 Kbps MAX3221EEUE+T variant. Keep the connector and transceiver on the protected side of the chassis and validate the cable, ground reference, and electrostatic-discharge requirements for retail deployments.
پێشنیارکراو
Data Acquisition and Instrumentation
The MAX3221EUE+T can connect a controller, analyzer, or service terminal to a laboratory instrument through one RS-232 channel. Its 120 Kbps rate is suitable for command-oriented instruments and moderate diagnostic data streams, and the small TSSOP package leaves board area for analog and precision circuitry. The MAX3221 family's AutoShutdown capability can reduce idle consumption when no valid receiver activity is present. During PCB design, separate the RS-232 traces from sensitive analog inputs, keep the charge-pump nodes compact, and confirm the instrument's request-to-send, ground, and signal-polarity conventions before fabrication.
پێشنیارکراو
Embedded Controller Maintenance Port
The MAX3221EUE+T provides a compact maintenance and firmware-recovery link for an embedded controller with one service connector. One transmitter and one receiver are sufficient for a conventional serial console, while the 16-pin TSSOP package simplifies routing compared with larger multi-channel RS-232 devices. Operation from 3.0 V to 5.5 V supports integration with 3.3 V control logic and 5 V interface rails. Locate the device near the connector entry point, provide a stable common ground, and use the manufacturer's pin descriptions to assign receiver-enable and shutdown functions so the host can detect an attached terminal reliably.
پێشنیارکراو
RS-232-to-TTL Serial Adapter
The MAX3221EUE+T is appropriate for a compact RS-232-to-TTL adapter because the 1/1 topology matches a single-ended logic conversion channel and the 120 Kbps rate covers many serial peripherals. Its 3.0 V to 5.5 V operation permits selection of the adapter's logic supply while the MAX3221 family handles the RS-232 signal levels internally. The TSSOP package is useful in small adapter boards, but connector clearance often governs the final footprint. Keep the device close to both the connector and logic interface, provide local supply bypassing, and follow the manufacturer layout guidance for charge-pump capacitors and grounding.
پێشنیارکراو
Battery-Powered Field Test Equipment
The MAX3221EUE+T can serve as the communications interface in portable field-test equipment where an RS-232 connection is required intermittently. The MAX3221 family's AutoShutdown feature reduces supply current to approximately 1 µA when a valid receiver signal is absent, helping preserve energy between measurements. The device's 120 Kbps rating and single-channel arrangement are adequate for compact loggers and service tools. The actual battery-life benefit depends on correct shutdown wiring, cable detection, and the duration of each measurement session. Validate the complete power profile and ensure that the selected regulator supports the listed 1 A maximum supply-current condition.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX3221EUE+T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX3221EEUE+T | MAX3221ECAE+T | ICL3221EIAZ-T | ICL3221EIVZ |
|---|---|---|---|---|---|
| Package | TSSOP-16 | TSSOP-16 | TSSOP-16 | TSSOP-16 | TSSOP-16 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Renesas Electronics | Renesas Electronics |
| Interface Type | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
جیاکەرەوە سەرەکییەکان
- Lower documented data-rate ceiling than the MAX3221EEUE+T (بەراورد بەMAX3221EEUE+T)
- Single-channel RS-232 interface with compact 16-pin TSSOP packaging (بەراورد بەICL3221EIAZ-T)
- Three-level supply compatibility for embedded systems (بەراورد بەMAX3221ECAE+T)
- AutoShutdown family architecture supports low idle consumption (بەراورد بەICL3221EIVZ)
تێبینییەکانی دیزاین
Place the MAX3221EUE+T close to the RS-232 connector and place its required bypass and charge-pump capacitors immediately adjacent to the associated pins. Keep the driver traces short and away from clocks, reset lines, precision analog inputs, and other sensitive nets. This arrangement limits connector-borne transients at the IC, reduces loop area, and prevents the internal charge-pump switching area from coupling into unrelated circuitry.
Design the supply rail for the listed 1 A maximum supply-current condition and provide local high-frequency decoupling at the transceiver. Although the MAX3221 family can enter a low-current AutoShutdown state, normal operating current and transient demand still depend on the exact device mode and load. Confirm whether the system supplies 3.3 V or 5 V to the interface and ensure downstream logic thresholds remain compatible with the selected voltage.
Do not substitute MAX3221EUE+T and MAX3221EEUE+T solely because both are 16-pin devices. Their documented maximum data rates differ at 120 Kbps and 250 Kbps, and suffix-specific ESD, shutdown, or qualification details may also differ. Before approving a drop-in replacement, compare the pin-description tables, charge-pump capacitor values, logic thresholds, temperature range, and protection ratings for the exact ordering codes.
Treat the RS-232 connector and cable as a potential source of conducted and radiated interference. Use the connector shell and circuit ground according to the interface's grounding strategy, keep the unprotected cable side away from sensitive board areas, and validate the completed assembly with the intended cable attached. The transceiver's internal ESD capability does not remove the need for connector placement, chassis grounding, and system-level surge protection.
زانیاری پابەندبوون
No exact-code compliance declarations were identified in the verified product listings. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current manufacturer product documentation before procurement release.