Analog Devices

MAX3232CAE+ - Dual RS-232 Transceiver | Analog Devices

MPN: MAX3232CAE+ ✓ چالاک
3.0 V to 5.5 V Vdss 16-pin SSOP Package
MOQ: 1 |

MAX3232CAE+ گشتی

The Analog Devices MAX3232CAE+ is a low-power, true RS-232 transceiver with two transmitters and two receivers, operating from a 3.0 V to 5.5 V single supply in a 16-pin SSOP package. It supports data rates up to 1 Mbps and uses a dual charge-pump architecture to generate the positive and negative voltage levels required by true RS-232 links. The low-dropout transmitter output stage preserves RS-232 performance across the complete supply range, while the receiver design supports low-power operation.

A true RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar, differential voltage signaling used by RS-232. In the product hierarchy, the MAX3232CAE+ belongs to the RS-232 interface transceiver class, within interface ICs and broader semiconductor signal-conditioning devices. It is intended for equipment that must communicate over longer cable runs where logic-level signaling would not provide sufficient noise margin.

Key features include two driver channels, two receiver channels, a 3.0 V to 5.5 V supply range, operation up to 1 Mbps, and a 16-pin SSOP footprint. The dual charge pumps generate the required RS-232 voltage levels without a separate negative supply. Its low-dropout transmitter architecture is particularly useful when the transceiver operates from a 3.0 V rail, where maintaining useful driver amplitude would otherwise be difficult.

The integrated charge-pump and driver circuitry places most of the signal-conversion function inside the package. External charge-pump capacitors and receiver input bypass capacitors must still be connected according to the manufacturer datasheet. The MAX3232CAE+ supports both transmit and receive paths in one device, allowing a compact design to implement a complete asynchronous RS-232 port using one transceiver package.

Typical applications include industrial control equipment, test and measurement instruments, point-of-sale terminals, security systems, and embedded serial-port interfaces. It is especially appropriate where equipment must support a legacy RS-232 connector while the rest of the system uses low-voltage digital logic. The 1-Mbps capability also accommodates instrument-control links and industrial data buses operating below the transceiver's maximum rate.

Design the circuit around the exact SSOP-16 footprint and follow the manufacturer datasheet for charge-pump capacitor values, receiver capacitor placement, and unused-channel handling. Keep the interface connector and transceiver analog pins away from fast digital clocks and switching supplies. Check the complete power-up and shutdown sequence in the system specification, especially when the host interface may remain active while the RS-232 rails change state.

This product page combines the MAX3232CAE+ device specifications with package guidance, application-oriented design notes, and a compatibility-focused comparison. It is intended to help engineers confirm electrical fit, understand implementation trade-offs, and evaluate suitable drop-in choices without relying on a generic component listing alone.

جێگرەوەکانی جێگۆڕکێ بۆ MAX3232CAE+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3232CAE+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Voltage Range, Product Type, ESD Protection, Maximum Data Rate.

Maxim Integrated
Package: 16-pin TSSOP
بەراوردکردن لەگەڵ MAX3232CAE+ →
Analog Devices
Product Type: RS-232 transceiver
ESD Protection: ±15 kV
بەراوردکردن لەگەڵ MAX3232CAE+ →
Texas Instruments
Package: 16-pin SSOP, 5.30 mm width
Supply Voltage Range: 3 V to 5.5 V
ESD Protection: ±15 kV IEC ESD protection
بەراوردکردن لەگەڵ MAX3232CAE+ →
MaxLinear
Package: 16-SSOP (0.209, 5.30 mm Width)
Supply Voltage Range: +3.0 V to +5.5 V
ESD Protection: 15 kV
MaxLinear
Supply Voltage Range: 3 V to 5.5 V
ESD Protection: 15 kV on RS-232 pins
MaxLinear
Package: 16-pin SOIC
Supply Voltage Range: 3.0V to 5.5V
Product Type: RS-232 transceiver interface IC
MaxLinear
Product Type: RS-232 transceiver IC
بەراوردکردن لەگەڵ MAX3232CAE+ →
MaxLinear
Product Type: RS-232 transceiver IC

MAX3232ECAE+

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 SSOP-16
RS-232 transceiver · 2 transmitters · 2 receivers · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA · 4 × 0.1 µF

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SP3232EBCA-L/TR

✅ جێگرەوەی ڕاستەوخۆ
MaxLinear
📦 SSOP-16
RS-232 transceiver · 2 · 2 · +3.0 V to +5.5 V · 250 kbit/s · 15 kV · 0.1 µF · RS-232

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SP3232EBCN-L/TR

✅ جێگرەوەی ڕاستەوخۆ
MaxLinear
📦 SSOP-16
2/2 · Full duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps under load · 15 kV on RS-232 pins · True EIA/TIA-232-F · On-chip charge pump, single supply · 0.1 uF per pump node

✓ بەردەستە

$0.7711 / یەکە

بینینی داتاشیت →

MAX3232CAE+ تایبەتمەندییەکان

Product Type RS-232 interface transceiver
Transmitter Channels 2
Receiver Channels 2
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
Interface Standard True RS-232
پاکێج 16-pin SSOP
Charge-Pump Architecture Dual charge pump
Transmitter Output Stage Low-dropout design
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی MAX3232CAE+ 16-pin ssop

ڕێکخستنی پین بۆ MAX3232CAE+ (پاکێجی 16-pin ssop). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 16-pin ssop بۆ MAX3232CAE+

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3232CAE+.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX3232CAE+ گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Control Interfaces, Test and Measurement Instruments, Point-of-Sale and Peripheral Equipment, Embedded Data Acquisition Equipment, Security and Access-Control Equipment, Legacy Computer and Service Ports.

🏭

Industrial Serial Control Interfaces

The MAX3232CAE+ fits industrial equipment that must retain a true RS-232 service or configuration port while the internal controller operates at 3.3 V or 5 V. Two transmitters and two receivers support bidirectional communication, while the single 3.0 V to 5.5 V supply and dual charge pumps eliminate a separate negative rail. Its rate capability of up to 1 Mbps gives designers margin for common UART links. In a practical implementation, place the transceiver near the connector, route the differential RS-232 outputs as a paired pair, and follow the datasheet's capacitor values and layout.

🔧

Test and Measurement Instruments

The MAX3232CAE+ is useful for laboratory instruments that require a legacy RS-232 command interface alongside modern digital control electronics. Its two full RS-232 drivers and two receivers can support transmit, receive, and handshaking functions in a single 16-pin SSOP, reducing board area. Operation from a 3.0 V to 5.5 V supply allows use in mixed-voltage instruments, and the up-to-1-Mbps capability covers many serial-control protocols below that limit. Designers should preserve the bipolar signal at the connector and observe the recommended charge-pump and bypass-capacitor layout.

📱

Point-of-Sale and Peripheral Equipment

The MAX3232CAE+ can provide a compact RS-232 connection between a point-of-sale terminal, peripheral, or service computer and an embedded controller. The dual-driver, dual-receiver configuration supports a complete asynchronous port without using two separate interface packages. Its 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V logic environments, while the low-dropout transmitter stage helps maintain performance at the lower voltage limit. Keep the interface connector and transceiver away from switching regulators and high-current return paths to avoid disturbing the RS-232 receiver input.

🖥️

Embedded Data Acquisition Equipment

The MAX3232CAE+ is appropriate for data-acquisition equipment that must send configuration commands or transfer records through an RS-232 link. Two receivers can accommodate data and control inputs, while two transmitters support communication in both directions. The true RS-232 output levels improve noise immunity over longer installed cables compared with an unbuffered logic-level interface. The device operates from one 3.0 V to 5.5 V supply and reaches up to 1 Mbps, but the selected UART baud rate, cable length, grounding method, and receiver thresholds must be evaluated as a complete signaling system.

🎥

Security and Access-Control Equipment

The MAX3232CAE+ can support configuration and diagnostic communication in access-control readers, alarm panels, and security-system controllers that expose an RS-232 service port. Its integrated dual charge pumps produce the positive and negative voltages required for true RS-232 from a single 3.0 V to 5.5 V rail, which simplifies system power architecture. Two transmitters and two receivers cover standard bidirectional command and status paths. For reliable deployment, verify the operating-temperature requirement, protect the connector from surge events, and separate the interface ground strategy from noisy actuator and relay return currents.

💻

Legacy Computer and Service Ports

The MAX3232CAE+ is well suited to equipment that must connect a modern controller to an RS-232 service port, diagnostic connector, or legacy peripheral. The 16-pin SSOP package contains two transmitters, two receivers, and the dual charge-pump circuitry required to generate compliant bipolar levels. Its single-rail operation simplifies adaptation to 3.3 V and 5 V systems, and the 1-Mbps maximum rate exceeds the requirements of many conventional UART peripherals. During layout, keep the interface path short from the transceiver to the connector and use the manufacturer capacitor and grounding recommendations.

What is the MAX3232CAE+ used for?
The MAX3232CAE+ is a true RS-232 transceiver that converts between logic-level digital signals and the bipolar voltage levels used by RS-232 ports. It integrates two transmitters, two receivers, and a dual charge-pump circuit in a 16-pin SSOP package. According to the manufacturer datasheet, the charge pumps generate the required positive and negative voltage levels from a single 3.0 V to 5.5 V supply, making the device suitable for industrial, test, control, and legacy serial-interface equipment.
What is the operating voltage of the MAX3232CAE+?
The MAX3232CAE+ operates from a 3.0 V to 5.5 V supply. This range allows the same transceiver design to be used with 3.3 V or 5 V system rails. The manufacturer datasheet identifies the low-dropout transmitter output stage as an important feature because it maintains useful true RS-232 operation even when the supply voltage is close to the lower operating limit. Confirm capacitor values and operating limits against the datasheet for the selected system voltage.
How fast is the MAX3232CAE+ RS-232 transceiver?
The MAX3232CAE+ supports RS-232 data rates up to 1 Mbps. The device combines two full RS-232 drivers and two receivers, allowing bidirectional communication through one package. According to the manufacturer datasheet, the maximum signaling rate is 1 Mbps. Actual application throughput can be lower because of UART baud-rate error, character framing, cable characteristics, timing, and the host controller's serial implementation.
What is the MAX3232CAE+ pinout and package?
The MAX3232CAE+ is packaged as a 16-pin SSOP for surface-mount PCB assembly. The MAX3232CAE+ pin description, including power pins, driver outputs, receiver inputs, and charge-pump capacitor connections, must be assigned from the manufacturer datasheet pin table before schematic capture or PCB routing. The footprint should be checked against the exact ordering code because package drawings can differ in body width and lead spacing even when the pin count is the same.
Where can I download the MAX3232CAE+ datasheet PDF?
The MAX3232CAE+ datasheet is available through the Maxim Integrated device documentation linked on this page. The manufacturer datasheet defines the electrical characteristics, SSOP-16 footprint, recommended charge-pump capacitors, receiver bypass capacitors, and pin configuration. Use that document as the controlling reference for layout and implementation because package drawings, capacitor recommendations, and maximum ratings are device-specific.
Is the MAX3232CAE+ suitable for 3.3 V systems?
Yes, the MAX3232CAE+ is suitable for a 3.3 V system because its specified supply range is 3.0 V to 5.5 V. Its low-dropout transmitter output stage supports true RS-232 operation from the lower end of that range. The host logic should still be checked for compatible input thresholds and output levels, and the external capacitor values should follow the manufacturer datasheet rather than a generic RS-232 example.
What is the best drop-in replacement for the MAX3232CAE+?
The MAX3232ECAE+ is the closest documented same-family option because it is identified as a two-driver, two-receiver true RS-232 transceiver in the same 16-SSOP package. Its stated operating range is also 3.0 V to 5.5 V with operation up to 1 Mbps, while the related documentation adds a 15 kV ESD-protection description. Validate temperature limits, ESD rating, supply current, and exact pin functions before approving it for a new design.
Can the MAX3232ECAE+ replace the MAX3232CAE+?
The MAX3232ECAE+ can serve as a drop-in candidate for the MAX3232CAE+ because both are described as 2/2 true RS-232 transceivers in 16-SSOP packages operating from 3.0 V to 5.5 V at up to 1 Mbps. The ECA variant additionally carries a 15 kV ESD-protection description in the product listing. Final approval should confirm that every exposed function remains unchanged and that the temperature and protection requirements match the application.
What can replace the MAX3232CAE+ in an existing design?
A replacement must use the same SSOP-16 footprint, preserve the two-driver and two-receiver configuration, and operate from the same 3.0 V to 5.5 V supply range. The MAX3232ECAE+ is a documented same-family candidate, while the SP3232EBCA-L/TR and SP3232EB are identified as direct drop-in alternatives in a cross-reference listing. Check the exact pinout, ESD rating, data rate, temperature range, and external capacitor requirements before replacing the original part.
MAX3232CAE+ vs MAX3232ECAE+ - which is better?
Choose the MAX3232CAE+ when the exact original ordering code and its characterized behavior are required; choose the MAX3232ECAE+ when its documented 15 kV ESD-protection feature is needed. Both are listed as 2/2 true RS-232 transceivers in 16-SSOP packages with 3.0 V to 5.5 V operation and rates up to 1 Mbps. Review the manufacturer datasheet for any protection, supply-current, or temperature differences that matter to the design.
What is the best equivalent for the MAX3232CAE+?
The best equivalent depends on package, pinout, protection, and operating requirements rather than interface function alone. The MAX3232ECAE+ is a same-manufacturer SSOP-16 option with a documented 15 kV ESD-protection description, while the SP3232EBCA-L/TR and SP3232EB are listed as direct drop-in alternatives. Confirm the exact SSOP dimensions and electrical differences against the manufacturer datasheet before production use.
When should I choose the MAX3232CAE+ over a cross-brand RS-232 transceiver?
Choose the MAX3232CAE+ when maintaining the original Maxim-compatible SSOP-16 design is simpler than qualifying another supplier's device. It provides two drivers, two receivers, a 3.0 V to 5.5 V supply range, and operation up to 1 Mbps in one package. A cross-brand drop-in can reduce sourcing risk, but only after its exact pinout, footprint dimensions, ESD rating, temperature range, and capacitor requirements have been verified.
Is the MAX3232CAE+ suitable for industrial equipment?
The MAX3232CAE+ is electrically suitable for RS-232 links in industrial equipment when its specified operating limits satisfy the application. Its true RS-232 operation, 3.0 V to 5.5 V supply range, two transmitters, two receivers, and 1-Mbps capability support conventional serial interfaces. The operating-temperature and ESD ratings must be checked in the manufacturer datasheet before deployment in temperature extremes or electrically noisy environments.
Where can I buy the MAX3232CAE+ and check its lead time?
Use the Request a Quote form on this page to ask for MAX3232CAE+ availability, lead time, order quantity, and current commercial terms. The component is listed as an active 2/2 true RS-232 transceiver in a 16-SSOP package. For production planning, provide the required quantity, packaging preference, target date, and country of shipment so the supply response reflects the actual order.
What are the key specifications of MAX3232CAE+ that engineers should know?
The MAX3232CAE+ is a 2/2 true RS-232 transceiver with a 3.0 V to 5.5 V supply range, operation up to 1 Mbps, a dual charge-pump architecture, and a 16-pin SSOP package. Its low-dropout transmitter output stage allows useful RS-232 performance near the lower supply limit. According to the manufacturer datasheet, the dual charge pumps generate positive and negative levels from one supply, eliminating the need for a separate negative rail.
Do MAX3232CAE+ charge-pump capacitors affect RS-232 performance?
Yes, the external charge-pump and bypass capacitors directly support the transceiver's voltage generation and signal integrity. Their values, tolerance, voltage rating, placement, and trace routing should follow the manufacturer datasheet exactly. Incorrect capacitance can reduce driver amplitude or disturb the regulated charge-pump node, while long capacitor routes can introduce timing and noise problems. Keep the charge-pump network compact and connect the bypass capacitors close to their specified pins.

داتای سەرچاوەی ئەندازیاری بۆ MAX3232CAE+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MAX3232CAE+ when the design needs a true RS-232 interface operating from a 3.0 V to 5.5 V supply at rates as high as 1 Mbps. Its dual charge-pump architecture eliminates the need for a separate negative supply, while two drivers and two receivers consolidate a complete port into one 16-pin SSOP package. The MAX3232ECAE+ is the logical same-family option when the documented 15 kV ESD-protection feature is desirable and the complete pin and electrical characteristics remain acceptable. Consider SP3232EBCA-L/TR or SP3232EB when a cross-brand direct drop-in is needed and the required baud rate remains below their listed 250-kbit/s capability. For any alternative, verify the package body dimensions, lead spacing, pin functions, temperature limits, external capacitor requirements, and ESD rating. The MAX3232CAE+ is the strongest choice when maximum data rate and low-voltage true RS-232 operation are the dominant requirements.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX3232ECAE+ SP3232EBCA-L/TR SP3232EB
Brand Analog Devices Analog Devices Sierra Semiconductor Sierra Semiconductor
Package SSOP-16 SSOP-16 SSOP-16 SSOP-16
Maximum Data Rate 1 Mbps Up to 1 Mbps Up to 250 kbit/s Up to 250 kbit/s
Interface Standard True RS-232 True RS-232 RS-232 transceiver RS-232 transceiver

جیاکەرەوە سەرەکییەکان

  • Higher documented signaling rate than the cross-brand direct replacements (بەراورد بەSP3232EBCA-L/TR)
  • Higher documented signaling rate than the SP3232EB alternative (بەراورد بەSP3232EB)
  • Low-dropout true RS-232 operation across a 3.0 V to 5.5 V supply (بەراورد بەMAX3232ECAE+)

تێبینییەکانی دیزاین

Place the charge-pump capacitors, receiver bypass capacitors, and transceiver close to their associated pins according to the manufacturer datasheet layout. Keep the charge-pump node and its capacitor loop compact to reduce switching-node area and radiated noise. Route each RS-232 driver and receiver as a paired signal with a continuous return path, and avoid sharing narrow return-current segments with switching-power or high-current actuator circuits.

Decouple the MAX3232CAE+ supply with local high-frequency bypass capacitance and route it through a quiet ground reference. The 3.0 V to 5.5 V operating range permits 3.3 V and 5 V rails, but the external charge-pump capacitors must be rated for the actual node voltages, not merely the supply voltage. Validate startup behavior with the host UART disabled or in a defined state so an unintended line condition does not appear at the connector.

Protect the RS-232 connector and cable route from sources of surge, ESD, and high-energy transients. The MAX3232ECAE+ is documented with 15 kV ESD protection, but protection rating alone does not replace correct board-level protection or a suitable grounding strategy. Keep long traces away from clocks and switching-node copper, and use controlled-impedance routing when cable transitions or exposed test points materially affect signal integrity.

Do not substitute capacitors solely by capacitance value; follow the required dielectric, tolerance, voltage rating, and placement in the manufacturer datasheet. Also verify whether an unused receiver input may float, whether an unused driver output requires a defined termination, and how shutdown behaves during host reset. These details determine whether the unused RS-232 channel can produce noise or unintended current at the connector.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The MAX3232CAE+ is a commercial interface IC rather than an AEC-Q100 automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or an authorized compliance declaration.

داتا پشتڕاستکراوەتەوە لە: 2026-11-09 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX3232CAE+ datasheet MAX3232CAE+ pinout MAX3232CAE+ datasheet pdf MAX3232CAE+ specifications MAX3232CAE+ SSOP-16 package Analog Devices MAX3232CAE+ MAX3232CAE+ RS-232 transceiver MAX3232CAE+ 1 Mbps MAX3232CAE+ equivalent MAX3232CAE+ drop-in replacement MAX3232CAE+ vs MAX3232ECAE+ MAX3232CAE+ application circuit MAX3232CAE+ price MAX3232CAE+ stock MAX3232CAE+ RS-232 interface IC

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices MAX3232CAE+ MAX3232ECAE+ SP3232EBCA-L/TR SP3232EB RS-232 true RS-232 transceiver interface IC digital interface semiconductor dual charge pump RS-232 driver RS-232 receiver low-dropout transmitter UART SSOP-16 SSOP package family surface-mount technology SMD package ESD protection 3.3 V logic 5 V logic industrial control equipment test and measurement instruments point-of-sale equipment
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ