MAX3232CDRE4 - Dual 250kbps RS-232 Transceiver | Texas Instruments
MPN: MAX3232CDRE4 ✓ چالاکMAX3232CDRE4 گشتی
An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 voltage levels and converts received RS-232 signals back into logic-compatible levels. In the broader hierarchy, it is a transceiver within the interface IC category and a physical-layer device for point-to-point serial communication. The MAX3232 is designed for equipment that must communicate with legacy RS-232 ports, industrial controllers, service equipment, and computer peripherals.
Key features include a 3 V to 5.5 V operating supply, two driver channels, two receiver channels, data rates up to 250 kbps, and ±15 kV ESD protection. The wide 3 V supply range supports both 3.3 V and 5 V system rails. The integrated dual-channel architecture is particularly useful for ports carrying two independent RS-232 signals or for paired transmit and receive paths in control and diagnostic equipment.
The MAX3232 family uses charge-pump circuitry to generate the positive and negative RS-232 voltage levels required by the drivers. This internal approach allows operation from a single low-voltage supply, avoiding a separate bipolar power source. Its 250 kbps maximum signaling rate is suitable for many control, instrumentation, and legacy peripheral interfaces, although cable length, baud rate, capacitance, grounding, and signal integrity can limit practical communication distance.
Typical applications include industrial serial controllers, programmable instrumentation, test equipment, POS systems, service interfaces, and embedded systems that retain an RS-232 connection. The device is also useful in modern mixed-signal products where an external legacy device requires RS-232 but the main logic operates from a 3.3 V supply.
When laying out the circuit, follow the charge-pump capacitor and input/output capacitor recommendations in the manufacturer datasheet. Place the associated capacitors close to their designated pins, provide a low-impedance ground connection, and route driver outputs away from sensitive receiver inputs to reduce coupling and false triggering.
This page combines the MAX3232CDRE4 operating characteristics, verified document links, application guidance, package information, and drop-in alternatives. It is intended to help engineers evaluate electrical fit, board compatibility, and design integration before making a component-selection decision.
جێگرەوەکانی جێگۆڕکێ بۆ MAX3232CDRE4 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3232CDRE4 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە ESD Protection, Maximum Data Rate, Package, Transceiver Configuration.
MAX3232CDWR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX3232CDE4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3232CDRE4 تایبەتمەندییەکان
| Product Type | Dual RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Number of Driver Channels | 2 |
| Number of Receiver Channels | 2 |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV |
| Interface Standard | RS-232 |
| Transceiver Configuration | 2 drivers and 2 receivers |
| پاکێج | 16-pin SOIC |
| جۆری دامەزراندن | Surface mount |
ڕێکخستنی پینی MAX3232CDRE4
| پین 1 | R1OUT — RS-232 receiver 1 output |
| پین 2 | R1IN — RS-232 receiver 1 input |
| پین 3 | R2OUT — RS-232 receiver 2 output |
| پین 4 | R2IN — RS-232 receiver 2 input |
| پین 5 | VCC — Positive supply connection |
| پین 6 | ISPEED — Transceiver speed-control connection |
| پین 7 | NC — Not connected |
| پین 8 | GND — Ground connection |
| پین 9 | GND — Ground connection |
| پین 10 | NC — Not connected |
| پین 11 | ISPEED — Transceiver speed-control connection |
| پین 12 | VCC — Positive supply connection |
| پین 13 | R2IN — RS-232 receiver 2 input |
| پین 14 | R2OUT — RS-232 receiver 2 output |
| پین 15 | R1IN — RS-232 receiver 1 input |
| پین 16 | R1OUT — RS-232 driver 1 output |
بەکارهێنانە باوەکان
MAX3232CDRE4 گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Controller, Programmable Test Instrument, Point-of-Sale Terminal Interface, Service and Diagnostics Interface, Embedded Data Acquisition Unit, Mixed 3.3 V and 5 V Equipment.
Industrial Serial Controller
The MAX3232CDRE4 suits an embedded controller that must retain a legacy RS-232 service or configuration port. Its two drivers and two receivers can carry two independent communication paths from a single 3.3 V or 5 V logic system, reducing the number of interface packages needed on a crowded control board. The 250 kbps maximum rate is more than adequate for many configuration protocols, while ±15 kV ESD protection adds useful defense around an exposed connector. Design the circuit with the manufacturer-specified charge-pump capacitors, provide a low-impedance ground plane, and verify the communication distance with the actual cable. The principal design trade-off is that RS-232 is a point-to-point physical layer, so long cables or noisy industrial environments require careful shielding, grounding, and signal-integrity review.
پێشنیارکراو
Programmable Test Instrument
The MAX3232CDRE4 is useful in programmable laboratory and field-test equipment that must exchange commands with older RS-232 instruments. Two integrated driver channels support outbound control signals, while two receiver channels handle returned status or measurement data. The device operates from a 3 V to 5.5 V supply, allowing it to share a 3.3 V system rail without requiring a separate bipolar supply, and its 250 kbps rate supports many legacy serial instruments. Keep the transceiver close to the connector-side protection network to limit ESD current paths into the board, and route the receive traces away from the high-voltage driver outputs. Verify that the selected instrument uses conventional RS-232 levels and that the cable ground is available.
پێشنیارکراو
Point-of-Sale Terminal Interface
The MAX3232CDRE4 can support point-of-sale peripherals that expose an RS-232 service, receipt-printer, or customer-display interface. Its dual-channel architecture allows one channel to carry transaction commands and another to receive peripheral status, while the 3.3 V-compatible supply range fits modern embedded systems. The 250 kbps maximum rate is suitable for many legacy peripheral protocols, and ±15 kV ESD protection is valuable in retail equipment where cables are repeatedly connected. Use the datasheet reference values for external charge-pump and bypass capacitors, place the interface near the connector, and maintain separation between driver outputs and receiver inputs. Confirm the peripheral's logic polarity and connector pinout because DTE and DCE equipment can assign the two RS-232 signal roles differently.
پێشنیارکراو
Service and Diagnostics Interface
The MAX3232CDRE4 is well suited to equipment that exposes a service connector for configuration, firmware access, or diagnostics. Its dual drivers and receivers provide two channels for commands, status, and diagnostic traffic, while the 3 V to 5.5 V operating range allows integration with both 3.3 V and 5 V embedded platforms. At a maximum rate of 250 kbps, the interface can support many legacy service protocols, although actual range depends on cable capacitance and system grounding. The ±15 kV ESD protection rating helps protect the interface when service personnel connect an external cable, but connector design, board grounding, and protective components remain important. Follow the manufacturer reference circuit and confirm the connector's DTE or DCE signal assignment before layout release.
پێشنیارکراو
Embedded Data Acquisition Unit
The MAX3232CDRE4 can connect an embedded data-acquisition unit to legacy laboratory or plant equipment through two RS-232 channels. One pair can carry sampled data commands and the other can return configuration or alarm information, reducing the need for separate driver and receiver packages. Operation from 3.3 V is particularly useful for compact acquisition modules, and the 250 kbps rate is adequate for many supervisory and low-bandwidth sensor-control links. RS-232 signaling still requires a common ground and a suitable cable, and cable length must be reduced as data rate and capacitance increase. Place the transceiver and its prescribed capacitors near the connector, maintain uninterrupted ground returns, and avoid routing driver nets beneath sensitive analog or receive traces.
پێشنیارکراو
Mixed 3.3 V and 5 V Equipment
The MAX3232CDRE4 is useful in mixed-voltage equipment where modern control logic operates at 3.3 V but an external RS-232 port still requires full bipolar signaling. The 3 V to 5.5 V supply range lets the interface operate from a 3.3 V rail without a separate negative-voltage supply, while the internal charge-pump circuitry produces the required RS-232 levels. Two channels can support both control and status paths, and the 250 kbps rate is suitable for conventional control traffic. Ensure the rest of the interface can tolerate the connector-side voltage levels, apply the manufacturer capacitor values, and provide a short, low-impedance ground path. The interface does not replace galvanic isolation, so a separate isolation method is necessary when the connected equipment may sit at a different ground potential.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX3232CDRE4 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX3232CDWR | MAX3232CDE4 |
|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps |
| Driver Channels | 2 | 2 | 2 |
| Receiver Channels | 2 | 2 | 2 |
| ESD Protection | ±15 kV | ±15 kV | ±15 kV |
| Interface | RS-232 | RS-232 | RS-232 |
جیاکەرەوە سەرەکییەکان
- Two complete RS-232 channels in one compact package (بەراورد بەMAX3232CDWR)
- Low-voltage operation supports modern embedded rails (بەراورد بەMAX3232CDE4)
- ESD protection supports externally cabled ports (بەراورد بەMAX3232CDWR)
تێبینییەکانی دیزاین
Place the MAX3232 charge-pump capacitors and the bypass capacitor directly beside the pins specified in the manufacturer datasheet. Keep these high-frequency charge-pump paths short and connect the IC ground pins to a low-impedance ground plane. Place the ESD-protection network near the external connector so surge current is diverted before reaching the transceiver pins. Avoid long copper loops between the protection components, connector, and device ground.
Route the two RS-232 driver outputs as short, isolated traces to their connector or protection nodes, and keep those traces away from receiver inputs and sensitive analog signals. RS-232 driver outputs transition between positive and negative voltage levels, so coupling into an adjacent receiver can create false data. Use a continuous ground reference beneath or alongside the interface where practical, and avoid sharing narrow ground-current paths between the transceiver and unrelated high-current circuitry.
Do not treat every MAX3232 suffix as electrically and mechanically interchangeable. Before substituting a candidate, compare the 16-SOIC pin assignments, operating-temperature grade, enable or shutdown behavior, supply range, data-rate limits, external capacitor values, and ESD configuration. The MAX3232E family may provide improved performance over the original MAX3232, but an E-series order code can use a different package, so its presence in a family comparison does not establish pin-to-pin compatibility.
زانیاری پابەندبوون
The target-specific compliance and qualification information is not stated in the manufacturer snippets or official product-page excerpt. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the exact MAX3232CDRE4 orderable suffix in TI product and quality documentation.