MAX3232EEWE+T - 1Mbps RS-232 Transceiver | Analog Devices
MPN: MAX3232EEWE+T ✓ چالاکMAX3232EEWE+T گشتی
A true RS-232 transceiver is an interface circuit that converts logic-level signals between a host or embedded controller and an RS-232 link. The MAX3232 family uses charge-pump circuitry to generate the positive and negative voltage levels required by true RS-232, while integrated level translation allows the logic-side interface to operate from a low-voltage supply. This makes the device useful at the boundary between modern microcontrollers, industrial controllers, and legacy serial equipment.
Key features include a 3.0V to 5.5V operating range, operation up to 1Mbps, ±15kV ESD protection, and shutdown current down to 10nA. Each channel includes a driver and receiver, allowing two communication paths in one package. The 16-pin wide SOIC footprint supports conventional surface-mount assembly and thermal design without requiring a high-pin-count package.
The MAX3232E architecture is intended for systems where a compact true RS-232 interface, low standby consumption, and higher data-rate capability are important. Its 1Mbps maximum rate exceeds the common 250kbps operating point of many older RS-232 transceivers, while the 3.0V minimum supply supports direct operation from modern 3.3V system rails. The ±15kV protection rating improves robustness when exposed cables connect to exposed equipment or industrial control ports.
Typical uses include industrial serial controllers, instrumentation, data-acquisition equipment, point-of-sale terminals, and embedded systems that need to connect to an RS-232 host. It is also appropriate for configuration and service ports in communications equipment. When paired with a microcontroller UART, the transceiver can provide bidirectional serial connectivity without implementing the RS-232 voltage levels externally.
PCB design should place the charge-pump capacitors and bypass capacitors close to their specified pins. Keep the logic-side and RS-232-side routing paths separated to reduce coupling between fast switching nodes and sensitive receiver inputs. Follow the Analog Devices MAX3232E data sheet for the exact capacitor values, pin assignment, and layout pattern rather than substituting generic RS-232 layouts.
This page combines manufacturer specifications, exact-ordering information, compatible alternatives, application guidance, and design notes to support component selection and PCB implementation. It is intended to answer practical engineering questions about voltage compatibility, data rate, ESD protection, pin compatibility, and replacement decisions.
جێگرەوەکانی جێگۆڕکێ بۆ MAX3232EEWE+T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3232EEWE+T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Maximum Data Rate, Supply Voltage Range, ESD Protection, Interface Standard.
MAX3232EEWE+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3232EEAE+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3232ECWE+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →SP3232EBEN-L/TR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ICL3232IBNZ-T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ICL3232ECBNZ-T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX3232EEWE+T تایبەتمەندییەکان
| Product Type | Dual RS-232 line driver/receiver transceiver |
| Number of Channels | 2 channels |
| Transceiver Configuration | 2 driver and 2 receiver channels |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | Up to 1Mbps |
| ESD Protection | ±15kV |
| Shutdown Supply Current | Down to 10nA |
| Interface Standard | True RS-232 |
| پاکێج | 16-pin wide SOIC |
| Package Width | 7.50mm |
| جۆری دامەزراندن | Surface mount |
| Order Code | MAX3232EEWE+T |
| Production Status | PRODUCTION |
| دۆخی RoHS | unknown |
| REACH Status | unknown |
ڕێنمایی ڕێکخستنی پینی MAX3232EEWE+T 7.50mm
ڕێکخستنی پین بۆ MAX3232EEWE+T (پاکێجی 7.50mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3232EEWE+T.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX3232EEWE+T گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Controller Interface, Data Acquisition Equipment, Point-of-Sale Terminal, Instrumentation and Test Equipment, Embedded Configuration Port, Communication and Network Equipment.
Industrial Serial Controller Interface
The MAX3232EEWE+T fits an industrial controller that must connect a low-voltage microcontroller UART to an RS-232 service port. Its 3.0V to 5.5V operating range supports common 3.3V or 5V control rails, while the 1Mbps maximum data rate provides margin over the 250kbps rate common in many legacy serial links. The device generates true RS-232 bipolar levels internally. Place the specified charge-pump and bypass capacitors close to the device pins, and route the RS-232 side away from sensitive logic and clock circuitry.
پێشنیارکراو
Data Acquisition Equipment
The MAX3232EEWE+T is suitable for laboratory and industrial data-acquisition equipment that exchanges commands and measurement data with a host computer. The dual-channel arrangement permits two RS-232 links, and the 1Mbps capability reduces protocol timeouts when transferring larger data blocks. Its logic-side supply operation from 3.0V to 5.5V is useful with embedded processors operating from 3.3V. For long external cables, retain the IC's ±15kV ESD protection but evaluate whether the installation also needs separate surge and ground-fault protection.
پێشنیارکراو
Point-of-Sale Terminal
The MAX3232EEWE+T can provide a legacy point-of-sale terminal with a reliable RS-232 connection to a printer, scanner, or customer-facing display. The 1Mbps maximum data rate accommodates modern terminal traffic while remaining compatible with slower peripherals, and the 16-pin wide SOIC package is straightforward to assemble on a conventional PCB. Its shutdown current down to 10nA is advantageous in compact terminals that must reduce standby consumption. Confirm the peripheral voltage levels and connector pinout before connecting it to equipment that uses non-RS-232 signaling.
پێشنیارکراو
Instrumentation and Test Equipment
The MAX3232EEWE+T is appropriate for bench instruments that communicate configuration commands and results to a host or service laptop. The device's true RS-232 implementation supports positive and negative signal levels required by legacy instrumentation interfaces, while its low-voltage logic supply simplifies integration with test and control electronics. Its 1Mbps data-rate ceiling offers design margin for block transfers. Keep the interface reference ground and cable routing controlled in high-energy laboratory environments, where ESD protection alone may not address larger surge events.
پێشنیارکراو
Embedded Configuration Port
The MAX3232EEWE+T can add an RS-232 configuration and maintenance port to an embedded controller without requiring a separate external transceiver. Operating from 3.0V to 5.5V allows direct use of common processor supply rails, and the 10nA shutdown current supports systems that power the interface only during diagnostics. The dual-channel capability allows separate command and logging links when needed. Use the manufacturer capacitor values and pin layout directly, and ensure the host software uses inverted logic levels compatible with RS-232 rather than conventional UART signal polarity.
پێشنیارکراو
Communication and Network Equipment
The MAX3232EEWE+T is useful in communication equipment for local console, management, or factory-test connections. Its dual transceiver supports two ports in one package, while the 1Mbps rate and 3.0V to 5.5V supply range align with modern control hardware. The ±15kV ESD rating improves protection for ports connected to service cables, although chassis grounding and external protection may be required in severe industrial environments. Keep switching charge-pump nodes compact on the PCB to minimize coupling into the receiver and logic-side nets.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX3232EEWE+T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX3232EEWE+ | MAX3232EEAE+ | MAX3232ECWE+ | SP3232EBEN-L/TR | ICL3232IBNZ-T | ICL3232ECBNZ-T |
|---|---|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | MaxLinear | Renesas Electronics | Renesas Electronics |
| Interface Standard | True RS-232 | True RS-232 | True RS-232 | True RS-232 | Functionally equivalent RS-232 transceiver | RS-232 interface IC | RS-232 interface IC |
| Special Ordering Feature | +T tape-and-reel shipping option | Without +T tape-and-reel suffix | AE ordering option | EC ordering option | L/TR ordering option | I industrial-grade option with tape-and-reel suffix | EC ordering option with tape-and-reel suffix |
جیاکەرەوە سەرەکییەکان
- Higher maximum signaling rate within the same wide-SOIC footprint (بەراورد بەMAX3232ECWE+)
- Documented cross-brand pin-compatible equivalent (بەراورد بەSP3232EBEN-L/TR)
- Lower standby demand for intermittently used serial ports (بەراورد بەICL3232IBNZ-T)
- Production MAX3232E family with 1Mbps operation and ±15kV ESD protection (بەراورد بەICL3232ECBNZ-T)
تێبینییەکانی دیزاین
Place the charge-pump capacitors and bypass capacitors immediately adjacent to their designated MAX3232EEWE+T pins, with short ground returns. Follow the capacitor values and placement in the Analog Devices MAX3232E data sheet, Rev. 13. Do not substitute capacitors based only on capacitance rating; voltage tolerance, dielectric type, ESR, and package size also affect charge-pump behavior and line-rate performance.
Keep the RS-232-side nets and charge-pump nodes away from logic-side clocks, reset lines, ADC inputs, and sensitive analog inputs. Route the ground connection from the transceiver to the interface reference ground using a short return path, and follow the connector-side ground and surge-protection layout recommended by the system designer. Adequate spacing helps prevent cable transients and switching energy from coupling directly into receiver inputs.
Do not treat every 16-pin SOIC RS-232 transceiver as electrically interchangeable. Confirm the wide-SOIC footprint, maximum data rate, supply range, logic thresholds, ESD rating, temperature grade, and external capacitor requirements. In particular, the MAX3232ECWE+ alternative is listed at 250kbps rather than the MAX3232EEWE+T maximum of 1Mbps, so a footprint match does not guarantee equivalent data-rate performance.
Decouple the MAX3232EEWE+T supply with the capacitance specified by the manufacturer and keep the supply return path compact. The device's 10nA shutdown-current capability can reduce standby consumption, but the external capacitor leakage, pull-up networks, and connected logic devices may dominate total board current. Verify the complete circuit's minimum operating voltage before relying on low-power shutdown behavior.
زانیاری پابەندبوون
The manufacturer product page identifies MAX3232E as production. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the supplied product information, so those fields remain unknown.