Analog Devices

MAX3243EEAI+T - 3/5 RS-232 Transceiver, 3-5.5V | Analog Devices

MPN: MAX3243EEAI+T ✓ چالاک
3 V to 5.5 V Vdss Approximately 1 µA Id 28-pin SSOP Package
MOQ: 1 |

MAX3243EEAI+T گشتی

The Analog Devices MAX3243EEAI+T is a 3-driver, 5-receiver full-duplex RS-232 transceiver operating from 3 V to 5.5 V in a 28-pin SSOP package. It supports data rates up to 250 kbps, includes ±15 kV ESD protection, and draws approximately 1 µA when the AutoShutdown feature has disabled the on-board supply and drivers.

An RS-232 transceiver is an interface integrated circuit that converts between single-ended RS-232 line signals and complementary TTL/CMOS logic levels. It belongs to the RS-232 interface transceiver class, within interface ICs and broader semiconductor communication devices. The MAX3243EEAI+T combines three RS-232 drivers and five receivers, including two always-active noninverting receiver outputs for monitoring external signals without waking the main supply section.

Principal features include a single 3 V to 5.5 V supply operation, 250 kbps data-rate capability, enhanced electrostatic discharge protection on all transmitter outputs and receiver inputs, and automatic shutdown with automatic wakeup. These characteristics support portable equipment, industrial controllers, data-acquisition systems, and legacy peripheral interfaces that require a direct RS-232 connection.

The MAX3243 family uses Maxim Integrated's AutoShutdown architecture to reduce supply consumption when no valid receiver activity is detected. Supply current falls to approximately 1 µA in the shutdown condition, while activity on a receiver input can reactivate the internal supply and drivers. This behavior is useful in battery-powered and intermittently connected systems where an idle RS-232 port should not continue consuming significant power.

Typical uses include configuring an embedded controller for legacy printers, industrial instruments, point-of-sale equipment, and service-console connections. The three-driver arrangement supports multiple outbound RS-232 channels, while the five-receiver arrangement provides additional input and monitoring paths. Its 28-pin SSOP package also suits compact boards where connector protection and ESD resilience are important.

Design with the MAX3243EEAI+T by following the manufacturer datasheet for charge-pump capacitor selection, receiver-input handling, and supply bypassing. Confirm that every connected driver output meets the intended RS-232 voltage swing and that unused inputs remain in a defined state. Protect externally accessible connectors with the device's ESD capability and route return paths away from sensitive analog or high-speed digital circuitry.

This page combines manufacturer specifications, distributor availability references, family-level drop-in alternatives, and application-focused design guidance to support faster component evaluation. It also identifies the temperature-grade and package differences that must be reviewed before assigning an alternative part to an existing PCB.

جێگرەوەکانی جێگۆڕکێ بۆ MAX3243EEAI+T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3243EEAI+T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە ESD Protection, Product Type, Supply Voltage Range, Package, Number of Receivers.

Analog Devices
ESD Protection: ±15kV HBM
Product Type: RS-232 line driver and receiver transceiver
Supply Voltage Range: 3.0V to 5.5V
بەراوردکردن لەگەڵ MAX3243EEAI+T →
Analog Devices
Supply Voltage Range: 3.0 V to 5.5 V
Package: 28-pin TSSOP
بەراوردکردن لەگەڵ MAX3243EEAI+T →
Analog Devices
ESD Protection: ±15kV
Product Type: 3/5 RS-232 transceiver
Supply Voltage Range: 3.0V to 5.5V
بەراوردکردن لەگەڵ MAX3243EEAI+T →
Texas Instruments
ESD Protection: ±15 kV HBM
Product Type: Multichannel RS-232 line driver and receiver
بەراوردکردن لەگەڵ MAX3243EEAI+T →
Analog Devices
ESD Protection: 15 kV
Supply Voltage Range: 3.0 V to 5.5 V
Package: 32-pin TQFN, 7 mm x 7 mm
بەراوردکردن لەگەڵ MAX3243EEAI+T →
Analog Devices
ESD Protection: ±15kV
Supply Voltage Range: 3.0V to 5.5V
Package: 28-pin TSSOP
بەراوردکردن لەگەڵ MAX3243EEAI+T →

MAX3243EEUI+T

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 drivers · 5 receivers · Full duplex · ±15kV · 1µA

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3243ECUI+T

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 3 · 5 · 3.0 V to 5.5 V · 250 kbps · ±15 kV · 1 µA · EIA/TIA-232

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3243EETJ+T

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 3 · 5 · 3.0 V to 5.5 V · 250 kbps · 15 kV · 1 A maximum · Yes

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3243ECAI+T

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 28-pin SSOP
RS-232 line driver and receiver transceiver · 3 drivers · 5 receivers · 3.0V to 5.5V · 250kbps · ±15kV HBM · 1µA · Dual charge pump

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3243EETI+

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 28-pin SSOP
Multichannel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbps · ±15 kV HBM · 1 µA · 28 terminals · QCCN · Square

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ICL3243ECVZ-T

✅ جێگرەوەی ڕاستەوخۆ
📦 28-pin TSSOP
Cross-brand MAX3243E-class 3/5 RS-232 function in a 28-pin TSSOP; verify the Renesas pin map and body width because the cross-reference listing confirms comparison rather than universal pin identity.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX3243EEAI+T تایبەتمەندییەکان

Product Type RS-232 transceiver
Number of Drivers 3
Number of Receivers 5
Duplex Mode Full duplex
Supply Voltage Range 3 V to 5.5 V
Shutdown Supply Current Approximately 1 µA
Maximum Data Rate 250 kbps
ESD Protection ±15 kV
Logic Standard EIA/TIA-232, V.28/V.24
Power Features AutoShutdown with automatic wakeup
Always-Active Outputs 2 noninverting receiver outputs
پاکێج 28-pin SSOP
جۆری دامەزراندن Surface mount
Transmitter Output Protection Enhanced ESD protection
Receiver Input Protection Enhanced ESD protection

ڕێنمایی ڕێکخستنی پینی MAX3243EEAI+T 28-pin ssop

ڕێکخستنی پین بۆ MAX3243EEAI+T (پاکێجی 28-pin ssop). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 28-pin ssop بۆ MAX3243EEAI+T

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3243EEAI+T.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX3243EEAI+T گونجاوە بۆ 6 بەکارھێنانs: Legacy Printer and Service-Port Interface, Industrial Instrument Control, Point-of-Sale and Retail Terminal, Battery-Powered Portable Equipment, Data-Acquisition and Monitoring Systems, Embedded Console and Debug Interface.

🔧

Legacy Printer and Service-Port Interface

The MAX3243EEAI+T fits embedded controllers that must communicate with legacy RS-232 printers, scanners, or service equipment. Its three drivers support several outbound connections, while five receivers accept incoming data and two always-active noninverting outputs permit monitoring without waking the main charge-pump supply. The 3 V to 5.5 V operating range permits direct use with 3.3 V or 5 V processors, and the 250 kbps maximum rate provides ample margin for typical UART traffic. Confirm signal levels and connector-side protection against the system ground reference before deployment.

🏭

Industrial Instrument Control

Industrial analyzers, test equipment, and process controllers often retain RS-232 ports alongside newer USB or Ethernet interfaces. The MAX3243EEAI+T provides three drivers and five receivers for control commands, status polling, and external-device monitoring while using only 3 V to 5.5 V of supply. Its ±15 kV ESD protection strengthens the interface against charged cable or connector events, and AutoShutdown reduces the idle current to approximately 1 µA when no valid receiver signal appears. In field-service products, validate the temperature grade and apply the appropriate chassis-ground strategy at external connectors.

💳

Point-of-Sale and Retail Terminal

Retail terminals can use the MAX3243EEAI+T to connect a compact controller to scanners, scales, customer displays, or service connectors that still use RS-232. Three transmitter channels allow several peripheral buses to share a controller, and the five receivers support return paths without requiring a separate transceiver for every line. Operation from 3 V to 5.5 V suits compact POS hardware, while the 250 kbps rate covers short structured transactions and status frames. Because peripheral grounds can differ, use the manufacturer interface recommendations for cable shields and signal-reference handling.

🔋

Battery-Powered Portable Equipment

The MAX3243EEAI+T is useful in portable test gear and field-service equipment where the RS-232 port remains connected but is idle for extended periods. AutoShutdown disables the on-board supply and drivers when receiver inputs show no valid activity, reducing the listed shutdown current to approximately 1 µA. When a connected host sends data, automatic wakeup re-enables the interface. The 3 V to 5.5 V supply range supports compact battery-regulated designs, and ±15 kV ESD protection improves robustness when users attach unknown external cables. Evaluate overall current with the external charge-pump capacitors and connected pull networks.

📟

Data-Acquisition and Monitoring Systems

Data-acquisition controllers can use the MAX3243EEAI+T to combine command outputs with several monitored inputs. The three drivers support configuration commands and channel enables, while five receivers provide return-data or status paths. Two noninverting receiver outputs remain always active for monitoring external devices without forcing the main internal supply to remain fully active. The device's 250 kbps capability is suitable for moderate-rate instrumentation links, and its 28-pin SSOP package saves board area compared with larger discrete implementations. Keep long cable routes away from sensitive measurement front ends and verify grounding at the connector.

🖥️

Embedded Console and Debug Interface

An embedded platform can use the MAX3243EEAI+T as a console interface for boot messages, configuration menus, and service diagnostics. The 3 V to 5.5 V supply range accommodates processors with either 3.3 V or 5 V I/O, and 250 kbps supports interactive terminal traffic. Automatic wakeup allows the host to reconnect without a dedicated power-control line, while low shutdown current helps systems that periodically power their service interface. The ±15 kV ESD rating improves tolerance of external connector transients. Validate the RS-232 voltage swing at the cable end and use a ground-reference strategy appropriate to the enclosure.

کورتەی بەرهەمە پێشنیارکراوەکان

MAX3232ECPWR Texas Instruments بەکارهێنراوە لە: Legacy Printer and Service-Port Interface, Data-Acquisition and Monitoring Systems MAX3232ICAE Analog Devices بەکارهێنراوە لە: Legacy Printer and Service-Port Interface MAX3243EIDWR Texas Instruments بەکارهێنراوە لە: Legacy Printer and Service-Port Interface MAX3232EIDW Texas Instruments بەکارهێنراوە لە: Industrial Instrument Control MAX3243EIDBR Texas Instruments بەکارهێنراوە لە: Industrial Instrument Control MAX3243ECDWR Texas Instruments بەکارهێنراوە لە: Industrial Instrument Control MAX232EESE+ Analog Devices بەکارهێنراوە لە: Point-of-Sale and Retail Terminal MAX3232EEWE+ Analog Devices بەکارهێنراوە لە: Point-of-Sale and Retail Terminal MAX3243ECPWR Texas Instruments بەکارهێنراوە لە: Point-of-Sale and Retail Terminal MAX3232EIDB Texas Instruments بەکارهێنراوە لە: Battery-Powered Portable Equipment MAX3232CUE+T Analog Devices بەکارهێنراوە لە: Battery-Powered Portable Equipment MAX3243ECUI+T Analog Devices بەکارهێنراوە لە: Battery-Powered Portable Equipment MAX3232EEAE+ Analog Devices بەکارهێنراوە لە: Data-Acquisition and Monitoring Systems MAX3243EETI+ Texas Instruments بەکارهێنراوە لە: Data-Acquisition and Monitoring Systems MAX3232EIPW Texas Instruments بەکارهێنراوە لە: Embedded Console and Debug Interface MAX3232IPWR Texas Instruments بەکارهێنراوە لە: Embedded Console and Debug Interface MAX3243ECAI+T Analog Devices بەکارهێنراوە لە: Embedded Console and Debug Interface
What is the MAX3243EEAI+T?
The MAX3243EEAI+T is a 3-driver, 5-receiver, full-duplex RS-232 transceiver from Analog Devices in a 28-pin SSOP package. According to the manufacturer MAX3243E datasheet, it operates from 3 V to 5.5 V, supports signaling that meets EIA/TIA-232 and V.28/V.24 requirements, and provides ±15 kV ESD protection. It is intended for systems that need several RS-232 channels plus always-active monitoring inputs.
What is the maximum data rate of MAX3243EEAI+T?
The MAX3243EEAI+T supports data rates up to 250 kbps. The Analog Devices MAX3243E datasheet identifies the device as a 3 V-powered, multichannel RS-232 line driver and receiver, and the Mouser listing for the exact orderable part also states a 250 kbps maximum rate. This makes it suitable for legacy serial links, configuration ports, and instrument-control interfaces that need more speed than a conventional low-speed UART port.
What is the supply voltage range of MAX3243EEAI+T?
The MAX3243EEAI+T operates from 3 V to 5.5 V. The Analog Devices product page describes the MAX3221, MAX3223, and MAX3243 as 3 V-powered EIA/TIA-232 and V.28/V.24 communications interfaces, while the Mouser listing identifies a true +3 V to +5.5 V supply range. This allows the transceiver to work with both 3.3 V and 5 V system rails.
How much current does MAX3243EEAI+T draw in shutdown?
The MAX3243EEAI+T draws approximately 1 µA when its AutoShutdown feature has switched off the on-board supply and drivers. According to the Analog Devices MAX3243 product page, shutdown occurs when the receivers detect no valid signal level. This low idle current is valuable in battery-operated instruments, although the complete system draw will also depend on the external charge-pump capacitors, pull resistors, and connected logic.
Does MAX3243EEAI+T support automatic wakeup?
Yes, the MAX3243EEAI+T supports automatic shutdown and wakeup. The Analog Devices MAX3243E documentation describes automatic wakeup behavior that reactivates the internal supply when receiver activity indicates a valid signal. This removes the need for a separate host-controlled power enable in designs where detecting an incoming RS-232 signal should immediately restore the interface.
Where can I download the MAX3243EEAI+T datasheet PDF?
The official MAX3243E documentation is available from the Analog Devices product page, and a manufacturer-hosted PDF is also linked from the Digi-Key datasheet entry. Use the Analog Devices MAX3243E datasheet for the authoritative pin description, recommended charge-pump capacitors, electrical characteristics, and operating limits. Search for the complete orderable code MAX3243EEAI+T when requesting a specific package and temperature-grade configuration.
Where is the MAX3243EEAI+T pinout?
The MAX3243EEAI+T pinout is published in the pin-description section of the Analog Devices MAX3243E datasheet. The device uses a 28-pin SSOP package with three driver outputs, receiver inputs and outputs, power pins, ground pins, and charge-pump connections. Use the manufacturer pin table and package drawing when assigning PCB tracks because exposed connection names and no-connect positions must follow the exact revision.
Is MAX3243EEAI+T a direct replacement for MAX3243EEAI+?
The MAX3243EEAI+T is the tape-and-reel orderable form of the MAX3243EEAI+ device, with the same MAX3243E function and 28-pin SSOP construction. FindIC describes the MAX3243EEAI+ as completely replaceable by the MAX3243EEAI+T because the terminals and packages are consistent. Confirm reel orientation, moisture-sensitivity handling, temperature grade, and your assembly inventory requirements before treating the order codes as interchangeable.
What can replace the MAX3243EEAI+T?
The closest replacements are other MAX3243E family members in the same 28-pin SSOP format, including MAX3243EEUI+T, MAX3243ECUI+T, and MAX3243ECAI+T. They retain the 3-driver, 5-receiver RS-232 architecture, but their ordering codes can encode different temperature grades, automotive qualification, or delivery configurations. Review the manufacturer datasheet and your qualification requirements before changing the BOM.
What is the best Renesas equivalent for MAX3243EEAI+T?
The ICL3243ECVZ-T is the relevant Renesas comparison candidate for a second-source review, since it is compared against the MAX3243EEAI in cross-reference listings. However, the available cross-reference material does not explicitly confirm that every package variant is pin-to-pin and drop-in compatible. Verify the Renesas package drawing, pin names, temperature grade, supply range, data rate, and charge-pump connection against the MAX3243EEAI+T layout before approving it.
When should I choose MAX3243EEAI+T instead of MAX3243EEUI+T?
Choose the MAX3243EEAI+T when its ordering-code temperature and delivery configuration match the production requirement; otherwise, the MAX3243EEUI+T may be preferable for its corresponding industrial configuration. Both are MAX3243E-family 3-driver, 5-receiver devices in the 28-pin SSOP family, so their electrical functionality and pin arrangement are closely related. Compare the exact suffix definitions and temperature ratings in the manufacturer ordering guide.
Is MAX3243EEAI+T suitable for industrial equipment?
The MAX3243EEAI+T is suitable for industrial equipment when its specified temperature grade matches the ambient range and the manufacturer qualification requirements are satisfied. Its 3 V to 5.5 V supply, 250 kbps data rate, automatic wakeup, and ±15 kV ESD protection suit controller and instrument interfaces exposed to electrostatic discharge. Use the ordering guide to confirm the grade required for industrial temperature and quality expectations.
Where can I buy MAX3243EEAI+T?
Use the Request a Quote form on this page to request the current price, stock position, lead time, and minimum order quantity for MAX3243EEAI+T. The device is listed as a 28-pin SSOP RS-232 transceiver by distributor channel and the manufacturer product page confirms the family is active. Current commercial terms should be confirmed at the time of quotation because availability and lead time can change.
What is the price of MAX3243EEAI+T?
The current commercial price for MAX3243EEAI+T is obtained through the Request a Quote form on this page. Pricing depends on quantity, packaging format, market conditions, and current inventory, so a stale listing figure can be misleading. Submit the required quantity and delivery information in the quotation form to receive a current response for the exact MAX3243EEAI+T order code.
How long is the lead time for MAX3243EEAI+T?
The current lead time for MAX3243EEAI+T should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, reel configuration, component availability, and manufacturing demand. Providing the required quantity, target date, and shipment destination in the request allows XAIPART to quote the exact MAX3243EEAI+T configuration and its expected fulfillment schedule.
What are the key specifications of MAX3243EEAI+T that engineers should know?
The key MAX3243EEAI+T specifications are a 3 V to 5.5 V supply range, 250 kbps maximum data rate, 3 drivers, 5 receivers, full-duplex operation, and ±15 kV ESD protection in a 28-pin SSOP package. The Analog Devices MAX3243E datasheet also identifies approximately 1 µA AutoShutdown supply current and automatic wakeup. These specifications determine signal-channel count, system-rail compatibility, and connector-protection requirements.

داتای سەرچاوەی ئەندازیاری بۆ MAX3243EEAI+T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Select the MAX3243EEAI+T when the design needs three RS-232 transmit channels, five receive channels, operation from a 3.3 V or 5 V rail, and protection for externally connected serial ports. Its 250 kbps rate, approximately 1 µA AutoShutdown current, automatic wakeup, and ±15 kV ESD protection make it a strong fit for industrial instruments, embedded service consoles, and legacy peripheral systems. Choose MAX3243EEUI+T, MAX3243ECUI+T, MAX3243EETJ+T, or MAX3243ECAI+T when a different ordering suffix better matches the required temperature grade, qualification level, or reel configuration without changing the basic MAX3243E function. Consider ICL3243ECVZ-T only after verifying its Renesas package dimensions, pin map, and electrical ratings against the existing PCB. For designs needing fewer ports, a two-driver MAX3232-class device is more appropriate and can reduce board area and cost.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX3243EEUI+T MAX3243ECUI+T MAX3243EETJ+T MAX3243ECAI+T MAX3243EETI+ ICL3243ECVZ-T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Renesas Electronics
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin TSSOP
Transceiver Type 3/5 RS-232 transceiver 3/5 RS-232 transceiver 3/5 RS-232 transceiver 3/5 RS-232 transceiver 3/5 RS-232 transceiver 3/5 RS-232 transceiver MAX3243E-class 3/5 RS-232 transceiver
Duplex Mode Full duplex Full duplex Full duplex Full duplex Full duplex Full duplex Full duplex

جیاکەرەوە سەرەکییەکان

  • Five-receiver capability with always-active monitoring outputs (بەراورد بەMAX3232ECPWR)
  • Higher supported signaling rate than standard MAX3232-class interfaces (بەراورد بەMAX3232ECPWR)
  • Automatic wakeup reduces host control overhead (بەراورد بەMAX3243ECAI+T)

تێبینییەکانی دیزاین

Place the charge-pump capacitors and the transceiver close to their associated IC pins, keeping the high-current charge-pump loop compact. Follow the Analog Devices MAX3243E datasheet for the exact capacitor values, tolerances, and dielectric requirements. The 28-pin SSOP footprint has fine-pitch leads, so inspect the land pattern and paste stencil before assembly. Keep the connector-side RS-232 traces away from sensitive analog inputs and route the cable shield toward chassis or signal ground according to the product's grounding architecture.

Do not assume that the 3 V to 5.5 V supply specification applies to the RS-232 driver outputs; the interface generates elevated positive and negative voltages through its charge pump. Verify the driver-output swing, receiver thresholds, and logic-level compatibility in the manufacturer datasheet. Also avoid leaving receiver inputs floating, and confirm that AutoShutdown behavior is acceptable for the application. A valid incoming signal can wake the interface automatically, which may be undesirable where the host requires complete software control of port activity.

RS-232 can present substantial edge rates and cable-coupled transients even at modest data rates. Keep driver outputs and receiver inputs away from clocks, switching regulators, and sensitive measurement nodes, and provide the manufacturer-recommended bypass capacitance on the supply pins. The integrated ±15 kV ESD protection improves robustness but does not replace a correct grounding strategy or external surge protection for severe industrial environments. Use short ground-return paths and test the completed cable assembly for common-mode interference.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The MAX3243E family is described by the manufacturer as an active 3 V-powered RS-232 interface with enhanced ESD protection. Exact RoHS, REACH, halogen-free, and conflict-minerals statements for this order code must be confirmed through the manufacturer product documentation or a current compliance certificate.

داتا پشتڕاستکراوەتەوە لە: 2026-11-17 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX3243EEAI+T MAX3243EEAI+T datasheet MAX3243EEAI+T datasheet pdf MAX3243EEAI+T pinout MAX3243EEAI+T equivalent MAX3243EEAI+T replacement MAX3243EEAI+T 28-SSOP MAX3243EEAI+T 250kbps RS-232 MAX3243EEAI+T AutoShutdown Analog Devices MAX3243EEAI+T MAX3243EEAI+T price MAX3243EEAI+T stock MAX3243EEAI+T vs MAX3243EEUI+T MAX3243EEAI+T industrial interface

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices MAX3243EEAI+T MAX3243E MAX3243EEUI+T MAX3243ECUI+T MAX3243EETJ+T MAX3243ECAI+T ICL3243ECVZ-T Renesas Electronics RS-232 transceiver interface IC line driver line receiver EIA/TIA-232 V.28 V.24 AutoShutdown automatic wakeup full duplex 3 V to 5.5 V supply 250 kbps ±15 kV ESD protection 28-pin SSOP surface-mount package industrial instrumentation embedded service console legacy peripheral interface charge-pump capacitor
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ