Maxim Integrated

MAX3388EEUG+T - 2.5V ESD-Protected RS-232 Transceiver | Maxim

MPN: MAX3388EEUG+T ✓ چالاک
2.5 V Vdss EIA/TIA-232 and V.28/V.24 Rds(on) 24-TSSOP Package
MOQ: 1 |

MAX3388EEUG+T گشتی

The Maxim Integrated MAX3388EEUG+T is a 2.5V-powered, ±15kV ESD-protected RS-232 transceiver designed for portable data and communications equipment. The device combines three drivers and two receivers in a 24-TSSOP package, operates from a single 2.5V supply, and supports data rates up to 460kbps. Its combination of low power requirements, high data-rate capability, and enhanced electrostatic-discharge protection makes it appropriate for RS-232 links in PDAs, cellular phones, and other compact portable systems.

An RS-232 transceiver is an interface IC that converts between digital logic-level signals and RS-232 line-level signals. The transmitter section drives logic-level data onto a serial interface, while the receiver section converts incoming RS-232 signals back into logic-compatible data. As a 3/2 transceiver, the MAX3388EEUG+T provides three transmit channels and two receive channels in one package, reducing component count and simplifying portable serial-interface designs.

The main advantages of this MAX3388E-family device include its low 2.5V operating supply, data-rate capability of 460kbps, and ±15kV ESD protection. The low supply voltage supports designs in which conserving battery energy and reducing overall system voltage are priorities. ESD protection is particularly valuable in handheld equipment because exposed serial connectors are susceptible to electrostatic discharge during use, handling, and connection to external accessories.

The MAX3388EEUG+T belongs to the MAX3388E and MAX3389E interface family, which is designed around EIA/TIA-232 and V.28/V.24 communications interfaces. Both families share a low-power 2.5V architecture, high data-rate operation, and enhanced ESD protection. The MAX3388E provides two receivers, making it appropriate for designs that need more driver channels than receiver channels.

Typical uses include RS-232 connections in PDAs and cellular phones, portable data acquisition equipment, and embedded systems that exchange serial data with accessories or service equipment. In these applications, the device can bridge a low-voltage controller to an external RS-232 port while maintaining a compact 24-pin surface-mount footprint. Board designers should still provide suitable connector protection and route the interface according to the manufacturer's application guidance.

A key design consideration is the distinction between the low-voltage logic side and the RS-232 side. Decoupling, grounding, and connector placement can affect signal integrity and ESD performance even when the IC itself includes internal protection. Use the pin-description and application-circuit information in the manufacturer datasheet when assigning input, output, enable, ground, and supply connections.

This product page combines exact package and interface information with practical drop-in cross-reference options, application guidance, and design considerations. It supports faster component identification while preserving the distinction between verified electrical facts and engineering guidance that still requires circuit-level validation.

جێگرەوەکانی جێگۆڕکێ بۆ MAX3388EEUG+T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3388EEUG+T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Driver Count, ESD Protection, Interface Standard, Maximum Data Rate.

Maxim Integrated
Product Type: 3/2 RS-232 transceiver
Interface Standard: EIA/TIA-232, RS-232
Maximum Data Rate: 460kbps
بەراوردکردن لەگەڵ MAX3388EEUG+T →
Analog Devices
Driver Count: 3 drivers
ESD Protection: 15 kV
Interface Standard: EIA/TIA-232
بەراوردکردن لەگەڵ MAX3388EEUG+T →

MAX3388ECUG+

✅ جێگرەوەی ڕاستەوخۆ
Maxim Integrated
📦 24-TSSOP
3/2 RS-232 transceiver · 2.5 V · 460kbps · 15kV · 3 · 2 · EIA/TIA-232, RS-232 · V.28/V.24

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3388EEUG-T

✅ جێگرەوەی ڕاستەوخۆ
📦 24-TSSOP
Documented package-and-terminal-compatible replacement; rated data-rate difference is 0% because both are listed at 460kbps

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX3388EEUG+T تایبەتمەندییەکان

Product Type RS-232 transceiver
Transceiver Configuration 3 drivers and 2 receivers
ڤۆڵتیەی دابینکردن 2.5 V
Maximum Data Rate 460 kbps
ESD Protection ±15 kV
Supported Interface Standards EIA/TIA-232 and V.28/V.24
پاکێج 24-TSSOP
Package Width 4.40 mm
Package Height 0.173 inch
Number of Terminals 24
Terminal Form Gull wing
جۆری دامەزراندن Surface mount
Temperature Grade Industrial
Receiver Count 2
Driver Count 3

ڕێنمایی ڕێکخستنی پینی MAX3388EEUG+T 0.173 inch

ڕێکخستنی پین بۆ MAX3388EEUG+T (پاکێجی 0.173 inch). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 0.173 inch بۆ MAX3388EEUG+T

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3388EEUG+T.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX3388EEUG+T گونجاوە بۆ 6 بەکارھێنانs: Personal Digital Assistant Serial Interface, Cellular Phone Data Interface, Portable Data Acquisition Equipment, Embedded Service and Configuration Port, Portable Instrumentation Control Link, Battery-Powered Wireless Terminal.

📱

Personal Digital Assistant Serial Interface

The MAX3388EEUG+T fits a PDA design that requires a compact, low-voltage RS-232 connection to an accessory, cradle, or service port. Its 2.5V supply matches low-voltage portable-system rails, while three drivers and two receivers provide asymmetric channel support without requiring separate transmitter and receiver packages. The 460kbps rate allows the design to move serial data faster than a conventional low-speed RS-232 port. The ±15kV ESD rating is especially relevant when the connector is accessible to the user. Place the transceiver close to the connector and follow the datasheet layout guidance to preserve signal quality and protection performance.

📱

Cellular Phone Data Interface

The MAX3388EEUG+T is suitable for a cellular phone or companion data module requiring an EIA/TIA-232 interface at 2.5V. The low supply voltage aligns with portable power budgets, while the 460kbps data rate supports command, diagnostic, and configuration traffic. Three transmitters and two receivers can support several point-to-point links, subject to the electrical limits of each RS-232 connection. The integrated ±15kV ESD protection strengthens a connector-facing interface that may be exposed during everyday handling. Use low-ESR supply decoupling and route transceiver traces away from sensitive radio and display circuitry.

🖥️

Portable Data Acquisition Equipment

The MAX3388EEUG+T can provide the host-side RS-232 interface in compact data-acquisition equipment that communicates with a laptop, service console, or external instrument. Its 460kbps capability is suitable for transferring commands and sampled data where higher throughput is useful, while its three-driver and two-receiver arrangement supports typical console and control connections. Operation from 2.5V simplifies integration with low-voltage embedded controllers. The ±15kV ESD protection adds robustness for field equipment, but the final interface still needs correct grounding, connector placement, and cable compatibility. Validate the complete signal path at the intended data rate.

🏭

Embedded Service and Configuration Port

The MAX3388EEUG+T is appropriate for an embedded system that exposes a service or configuration port over RS-232. A 2.5V supply supports low-voltage industrial and portable controller designs, and the 460kbps rate allows responsive command exchange without imposing a large host-processing burden. Two receiver channels can support independent inbound status signals, while three driver channels cover common outbound control paths. The 24-TSSOP package keeps the interface compact, and ±15kV ESD protection is useful when the port is exposed during maintenance. Confirm logic levels, enable polarity, and connector requirements in the manufacturer pin descriptions.

🔧

Portable Instrumentation Control Link

The MAX3388EEUG+T can bridge a low-voltage controller to an RS-232-controlled instrument in portable test equipment. The transceiver's 460kbps data rate supports faster configuration streams and status polling than a slow asynchronous interface, while its three transmitters and two receivers can consolidate more than one point-to-point link in a single 24-TSSOP package. The 2.5V supply reduces power-conversion complexity in portable systems. Its ±15kV ESD protection is beneficial when users connect external test leads or service cables. Validate the full electrical interface and use a twisted-pair cable arrangement for dependable RS-232 operation.

🌐

Battery-Powered Wireless Terminal

The MAX3388EEUG+T is useful in a battery-powered wireless terminal that needs a wired RS-232 diagnostic or configuration connection alongside its wireless function. The 2.5V operating supply fits compact power trees, and the transceiver's three-driver and two-receiver arrangement can support several point-to-point console links. At up to 460kbps, the interface can exchange logs and setup data quickly enough for service workflows. ESD protection rated at ±15kV improves resilience in portable equipment where connectors are touched regularly. Designers should isolate noisy wireless and switching circuitry from the RS-232 path and follow the manufacturer's decoupling and grounding recommendations.

What is the MAX3388EEUG+T?
The MAX3388EEUG+T is a 2.5V-powered RS-232 transceiver with three drivers, two receivers, a 460kbps maximum data rate, and ±15kV ESD protection. According to the manufacturer datasheet description, it is intended for low-power EIA/TIA-232 and V.28/V.24 communications interfaces in equipment such as PDAs and cellular phones. It is supplied in a 24-TSSOP package.
What are the key specifications of MAX3388EEUG+T that engineers should know?
The principal MAX3388EEUG+T specifications are a 2.5V supply, a 460kbps data rate, three transmit channels, two receive channels, and ±15kV ESD protection. The manufacturer describes the device as a low-power, high-data-rate RS-232 interface for portable equipment. Its 24-TSSOP package has 24 terminals, a 4.40mm width, and a 0.173-inch height, making it suitable for compact surface-mount assemblies.
Where can I download the MAX3388EEUG+T datasheet PDF?
The MAX3388EEUG+T datasheet can be opened through the Maxim Integrated document link listed on this page. The document identifies the MAX3388E and MAX3389E as 2.5V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with two receivers, high data-rate capability, and enhanced ESD protection. Use the manufacturer's pin table and typical circuit before assigning PCB functions.
Where is the MAX3388EEUG+T pinout located?
The MAX3388EEUG+T pinout is located in the pin-description section of the manufacturer datasheet. The package contains 24 terminals in a gull-wing 24-TSSOP configuration. Use that table to identify supply pins, driver outputs, receiver inputs, enable functions, and ground connections before laying out the PCB or assigning signals.
Is the MAX3388EEUG+T suitable for PDAs and cellular phones?
Yes, the MAX3388EEUG+T is specifically described as a 2.5V, ±15kV ESD-protected RS-232 transceiver for PDAs and cellular phones. Its low 2.5V operating supply fits low-voltage portable systems, while the 460kbps data rate supports faster serial communication than a basic RS-232 implementation. The integrated ESD protection improves interface robustness in connector-accessible equipment.
What is the difference between MAX3388EEUG+T and MAX3388ECUG+?
The MAX3388ECUG+ is identified as a complete replacement for the MAX3388EEUG+T because its terminals, package, performance parameters, and functional characteristics are consistent. Both use a 24-TSSOP package, and a comparison identifies the data rate as 460kbps for each. Confirm enable and shutdown behavior, supply limits, and every pin function in the manufacturer datasheet before production substitution.
Can MAX3388ECUG+ replace MAX3388EEUG+T without a PCB change?
Yes, the MAX3388ECUG+ is listed as a complete replacement for the MAX3388EEUG+T with consistent terminals and packages, so it can serve as a no-PCB-change candidate in the 24-TSSOP footprint. Both are associated with a 460kbps data rate. Production engineers should still compare the complete pin descriptions and operating conditions and approve the substitution through normal change-control procedures.
What is the best drop-in replacement for MAX3388EEUG+T?
The strongest documented drop-in replacement is the Maxim Integrated MAX3388ECUG+, which is described as completely replaceable because its terminals, package, and principal performance characteristics are consistent. It also uses a 24-TSSOP package and a 460kbps data rate. No additional pin-compatible cross-brand replacement was established by the cross-reference results, so do not treat similarly described RS-232 transceivers as drop-in parts without a complete pin-level review.
When should I choose MAX3388EEUG+T over MAX3388ECUG+?
Choose the MAX3388EEUG+T when its documented electrical behavior and temperature grade match the design exactly, particularly for industrial 2.5V portable-equipment interfaces requiring three drivers and two receivers. Choose the MAX3388ECUG+ only after its complete manufacturer datasheet confirms equivalent supply, enable, shutdown, and signal-level behavior. Because cross-reference information reports package and terminal compatibility, the deciding factors are procurement and exact parameter matching.
Is MAX3388EEUG+T suitable for a 460kbps RS-232 link?
Yes, the MAX3388EEUG+T is rated for data rates up to 460kbps, making it suitable for a 460kbps RS-232 link within the manufacturer's specified operating conditions. The device provides three driver outputs and two receiver inputs in one 24-TSSOP device. Cable length, capacitance, grounding, and connector quality can still limit practical RS-232 performance and should be evaluated at the system level.
How does MAX3388EEUG+T support low-power portable equipment?
The MAX3388EEUG+T supports low-power portable equipment through its 2.5V operating supply and low-power interface architecture. The manufacturer specifically identifies PDAs and cellular phones as target applications for the MAX3388E family. Operating from 2.5V can simplify integration with compact digital systems, although total power consumption depends on the enabled channels, operating data rate, and external circuit configuration.
What ESD protection does MAX3388EEUG+T provide?
The MAX3388EEUG+T provides enhanced electrostatic-discharge protection rated at ±15kV. This feature is valuable in portable products because their RS-232 connectors can be exposed to electrostatic discharge. Internal protection does not eliminate the need for careful connector placement, grounding, and board layout; follow the manufacturer's application guidance when routing the exposed interface.
Where can I buy MAX3388EEUG+T online?
Use the Request a Quote form on this page to request the MAX3388EEUG+T, current price, stock, and lead time. The form provides a single channel for a quote against the exact MAX3388EEUG+T ordering code rather than a related package or temperature variant. Include your target quantity and required delivery location so the commercial response can be matched to the production demand.
What is the price of MAX3388EEUG+T?
The current commercial terms for the MAX3388EEUG+T are shown through the Request a Quote form on this page. Submit the required quantity and shipment details to obtain a current price for the exact 24-TSSOP ordering code. The form can also address stock, minimum-order quantity, packaging requirements, and lead time without relying on a potentially stale static price.
What is the lead time for MAX3388EEUG+T?
Request the current lead time for MAX3388EEUG+T through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, and delivery destination, so it should be confirmed for the exact ordering code. Include your production schedule in the request to determine whether replenishment timing supports the required build plan.
Is MAX3388EEUG+T in stock?
Check current availability by sending a quote request through the Request a Quote form on this page. Stock status should be confirmed for the exact MAX3388EEUG+T ordering code because package and temperature-grade variants may have different replenishment conditions. Provide the required quantity and delivery country or region so the availability response reflects the intended shipment.
What can replace MAX3388EEUG+T?
The MAX3388ECUG+ can replace the MAX3388EEUG+T without a package or terminal change because cross-reference information identifies the devices as completely replaceable. It retains the 24-TSSOP format and a 460kbps data rate. The MAX3388EEUG-T is also identified as a compatible replacement candidate, but verify its temperature and ordering details against the production requirements before release.

داتای سەرچاوەی ئەندازیاری بۆ MAX3388EEUG+T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MAX3388EEUG+T for a 2.5V portable RS-232 design that requires three transmit channels, two receive channels, operation up to 460kbps, and ±15kV ESD protection. The MAX3388ECUG+ is the preferred documented substitution when procurement requires an alternative because its terminals, 24-TSSOP package, and main performance characteristics are reported as consistent. The MAX3388EEUG-T is another package-compatible candidate with an industrial temperature-grade description, but verify its complete ordering code and electrical specifications before production release. Neither cross-brand function nor a different RS-232 transceiver should be treated as drop-in without a complete package, pin, and parameter review. For new layouts, choose the exact MAX3388EEUG+T when its documented low-voltage application fit and ordering conditions are preferable, and use the Request a Quote form for current commercial availability.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX3388ECUG+ MAX3388EEUG-T
Package 24-TSSOP 24-TSSOP 24-TSSOP
Brand Maxim Integrated Maxim Integrated Maxim Integrated
Product Type RS-232 transceiver RS-232 transceiver RS-232 line transceiver
Number of Terminals 24 24 24

جیاکەرەوە سەرەکییەکان

  • Complete three-driver and two-receiver integration (بەراورد بەMAX3388ECUG+)
  • Documented 460kbps class operation (بەراورد بەMAX3388EEUG-T)
  • Low-voltage portable-system positioning (بەراورد بەMAX3388ECUG+)

تێبینییەکانی دیزاین

Place the MAX3388EEUG+T and its decoupling capacitors close to the associated connector and supply source. Keep the 2.5V supply path short, provide local ground return paths, and avoid routing RS-232 driver outputs beneath sensitive analog or high-speed digital sections. The manufacturer application guidance should be used to reproduce the recommended connection and grounding arrangement.

Treat each RS-232 channel as a separate point-to-point interface and avoid long unterminated branches. Keep driver and receiver traces away from switching nodes and radiating sources, and use a solid ground reference beneath the interface area when practical. Because the device can operate at 460kbps, verify signal transitions and ringing on the assembled PCB rather than relying only on simulation.

Do not substitute the RS-232 line interface with a TTL or CMOS UART transmitter. The MAX3388EEUG+T includes the line-level drivers and receivers required by an RS-232 port. Also confirm the exact ordering code, enable state, and pin functions before using MAX3388ECUG+ or MAX3388EEUG-T as replacements, even though both are documented as package-compatible candidates.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The RS-232 transceiver is not an automotive-qualified device based on the stated industrial temperature grade. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current product documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-09 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX3388EEUG+T datasheet MAX3388EEUG+T pinout MAX3388EEUG+T datasheet pdf MAX3388EEUG+T equivalent MAX3388EEUG+T replacement MAX3388EEUG+T cross reference MAX3388EEUG+T vs MAX3388ECUG+ MAX3388EEUG+T price MAX3388EEUG+T stock Maxim Integrated MAX3388EEUG+T MAX3388EEUG 2.5V RS-232 transceiver MAX3388EEUG 24-TSSOP footprint MAX3388EEUG ESD protected RS-232 MAX3388EEUG schematic

پێکهاتە و زاراوە پەیوەندیدارەکان

Maxim Integrated MAX3388EEUG+T MAX3388ECUG+ MAX3388EEUG-T RS-232 transceiver EIA/TIA-232 V.28 V.24 line transceiver receiver driver 2.5V power supply 460kbps data rate ±15kV ESD protection 24-TSSOP TSSOP package family surface mount SMD PDA cellular phone portable data acquisition RS-232 interface electrostatic discharge industrial temperature grade
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ