MAX3389ECUG+T - 2.5V RS-232 Transceiver | Analog Devices
MPN: MAX3389ECUG+T ✓ چالاکMAX3389ECUG+T گشتی
An RS-232 transceiver is an interface IC that translates logic-level signals between a host or controller and an RS-232 link. A driver converts TTL or CMOS logic into RS-232 levels, while a receiver converts incoming RS-232 signals back into logic levels. As a member of the voltage-regulator and power-management ecosystem, this interface IC connects low-voltage digital circuitry to the voltage and polarity characteristics of an RS-232 communications port.
The MAX3389ECUG+T provides 15kV ESD protection, a 2.5V supply, low power requirements, and high data-rate capability. Its three-driver, two-receiver configuration supports one communications channel plus one additional transmit function, making it practical for devices that need more than one RS-232 output but fewer than three active receivers. The integrated protection reduces the need for separate external protection networks on exposed connector-facing pins.
The MAX3389E belongs to the MAX3388E and MAX3389E family of 2.5V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. The MAX3389E configuration contains two drivers and two receivers. Because the interface operates from a low supply voltage, careful consideration of input levels, bypass capacitors, connector exposure, and grounding remains necessary when connecting it to legacy RS-232 equipment.
Typical uses include RS-232 ports in PDAs, cellular phones, portable instruments, point-of-sale terminals, and embedded communications equipment. The part is especially relevant where a 5V interface would add unnecessary power, where a 24-pin TSSOP footprint fits an existing layout, or where exposed RS-232 lines require stronger ESD protection. It can also support multiple wired communications functions when a system does not need every driver and receiver active simultaneously.
Place the MAX3389ECUG+T close to the RS-232 connector when practical, route each driver and receiver trace away from sensitive analog circuitry, and connect the interface ground to the system ground according to the board-level return-current plan. The 2.5V supply should be bypassed locally, while any external protection still needed for severe industrial transients should be selected for the connector environment rather than assumed to be covered by the IC.
This product data combines the MAX3389ECUG+T configuration, directly documented interface characteristics, verified package information, and a validated same-footprint replacement path. It also adds application-focused design guidance intended to make RS-232 integration more reliable in portable and embedded systems.
جێگرەوەکانی جێگۆڕکێ بۆ MAX3389ECUG+T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3389ECUG+T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە ESD Protection, Interface Standard, Product Type.
MAX3389ECUG+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3389ECUG+T تایبەتمەندییەکان
| Product Type | 3/2 RS-232 transceiver |
| ڤۆڵتیەی دابینکردن | 2.5 V |
| Driver Count | 2 |
| Receiver Count | 3 |
| Total Transceiver Channels | 2 |
| ESD Protection | 15 kV |
| Interface Standard | EIA/TIA-232 |
| Signaling Standard | V.28/V.24 |
| پاکێج | 24-pin TSSOP |
ڕێنمایی ڕێکخستنی پینی MAX3389ECUG+T 24-pin tssop
ڕێکخستنی پین بۆ MAX3389ECUG+T (پاکێجی 24-pin tssop). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3389ECUG+T.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX3389ECUG+T گونجاوە بۆ 6 بەکارھێنانs: PDA RS-232 Connectivity, Cellular Terminal Interface, Portable Test and Measurement Equipment, Point-of-Sale Terminal, Embedded Data Acquisition System, Industrial Control Communication Port.
PDA RS-232 Connectivity
The MAX3389ECUG+T fits a PDA that requires an RS-232 port without moving to a higher-voltage interface supply. Its 2.5V operating voltage reduces power demand in portable equipment, while two drivers and two receivers support a main communications channel and an auxiliary serial function. According to the MAX3389E datasheet, the family targets low-power EIA/TIA-232 interfaces. The 15kV ESD rating adds protection when the connector is accessible to users. Place the IC near the connector, keep return-current paths continuous, and verify logic thresholds against the host processor voltage.
پێشنیارکراو
Cellular Terminal Interface
The MAX3389ECUG+T is appropriate for cellular terminal equipment that connects an embedded controller to an RS-232 accessory or diagnostic port. Operating from 2.5V aligns the interface with low-voltage portable electronics, and the two transmitters can support control and status paths when both directions are required. The two receivers can monitor incoming data and another device signal. The MAX3389E family is identified for 2.5V-powered V.28/V.24 communication, and its 15kV ESD protection helps manage static discharge at an exposed connector. Confirm grounding and signal polarity against the equipment architecture.
پێشنیارکراو
Portable Test and Measurement Equipment
The MAX3389ECUG+T can serve as the RS-232 control and status interface in portable test equipment where a 2.5V embedded processor communicates with a host computer. Two drivers support outbound commands and acknowledgements, while two receivers support incoming host traffic and a second status channel. The low 2.5V supply requirement is valuable in battery-operated instruments, and 15kV ESD protection is useful when the RS-232 port is used outside an enclosure. Route the interface away from precision analog sections, provide local supply bypass, and use a continuous ground return between the connector and circuit board.
پێشنیارکراو
Point-of-Sale Terminal
The MAX3389ECUG+T is suitable for point-of-sale terminal hardware that uses RS-232 for a printer, scale, or service interface. Its two drivers and two receivers provide enough parallel I/O for a main channel plus auxiliary signalling, while the 2.5V supply supports compact embedded designs. The MAX3389E family is specified for low-power EIA/TIA-232 and V.28/V.24 communications, making it appropriate for legacy equipment interoperability. The integrated 15kV ESD protection should be considered when the terminal has a user-accessible connector, although additional transient protection may be needed in industrial installations.
پێشنیارکراو
Embedded Data Acquisition System
The MAX3389ECUG+T can provide legacy RS-232 connectivity in a compact data-acquisition controller that also operates from low-voltage logic. Two transmitters support configuration commands or dual-channel output, and two receivers accept commands, acknowledgements, or independent sensor-status signals. Its 2.5V supply operation avoids the higher current burden of a 5V interface, while 15kV ESD protection helps at connector boundaries. Maintain separation between RS-232 traces and sensitive measurement inputs, provide local bypass capacitance, and observe the MAX3389E electrical limits when connecting to unbalanced cable-referenced signals.
پێشنیارکراو
Industrial Control Communication Port
The MAX3389ECUG+T can support a low-voltage RS-232 communication port in a control module that must retain compatibility with legacy equipment. The 2.5V supply requirement suits modern embedded processors, and the two transmitters plus two receivers support command, response, and status functions. According to the MAX3389E family description, the device combines low power, high data-rate capability, and enhanced ESD protection. A 15kV ESD rating should not be treated as complete industrial surge protection; evaluate the cable length, grounding, and external transient requirements before deployment. Keep the interface return path within the board's grounding strategy.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX3389ECUG+T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX3389ECUG+ |
|---|---|---|
| Package | 24-TSSOP | 24-TSSOP |
| Brand | Analog Devices | Analog Devices |
| Supply Voltage | 2.5 V | 2.5 V |
| Driver Count | 3 | 3 |
| Receiver Count | 2 | 2 |
| Interface Standard | EIA/TIA-232 | EIA/TIA-232 |
| Signaling | V.28/V.24 | V.28/V.24 |
| ESD Protection | 15 kV | 15 kV |
جیاکەرەوە سەرەکییەکان
- Low-voltage operation preserves portable-system power budget (بەراورد بەMAX3389ECUG+)
- Integrated ESD protection supports connector-facing RS-232 ports (بەراورد بەMAX3389ECUG+)
- Drop-in replacement requires no PCB redesign (بەراورد بەMAX3389ECUG+)
تێبینییەکانی دیزاین
Place the MAX3389ECUG+T close to the RS-232 connector and route driver and receiver nets away from sensitive analog or high-speed digital traces. Preserve a continuous ground return from the connector shell or signal ground to the interface ground reference. If the cable can be longer than a few metres, keep the transceiver and connector interface area away from switching supplies and high-current return paths.
Decouple the 2.5V supply locally at the MAX3389ECUG+T. Follow the capacitor values and layout recommendations in the MAX3389E datasheet because a compact transceiver can experience fast edge currents when driver outputs change state. Use a short, direct supply path and a quiet ground reference to prevent connector activity from coupling supply noise into adjacent analog circuitry.
Do not treat the 15kV ESD rating as immunity to every cable-borne transient. RS-232 lines can also encounter surge, EFT, and ground-potential differences in industrial environments. Review the external protection strategy with the connector placement, cable length, enclosure, and equipment-grounding arrangement. Also verify the logic-high and logic-low input thresholds against the host processor supply before releasing the layout.
Confirm the exact ordering code before procurement. MAX3389ECUG+T identifies the taped version of the 24-TSSOP device, while MAX3389ECUG+ appears in the replacement cross-reference. The two are electrically and mechanically interchangeable, but production paperwork, reel handling, and manufacturer labeling should match the part intended for assembly.
زانیاری پابەندبوون
The target is a commercial interface IC, so AEC-Q100 qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or a declaration associated with the exact orderable MPN.