MAX3488CSA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MPN: MAX3488CSA+T ✓ چالاکMAX3488CSA+T گشتی
An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into differential bus voltages and receives differential bus signals as logic-level data. In the broader semiconductor hierarchy, it belongs to the interface IC class and connects digital controllers to physically longer, noise-prone industrial communication networks. Its differential signaling improves common-mode rejection and allows reliable communication over cables where single-ended signaling would be more susceptible to interference.
The MAX3488 combines a low-power 3.3V supply with a 10Mbps maximum data rate. Its slew-rate-limited driver reduces EMI and reflections associated with improperly terminated RS-485 cables, while the receiver provides a practical path to high-speed data transfer. The device is offered in an 8-pin SOIC package for surface-mount assembly, and the CSA+T ordering code identifies the tape-and-reel production configuration.
The MAX3488 family includes devices intended for related RS-485 and RS-422 requirements, but speed and operating-temperature choices remain important during substitution. Some family members are optimized for lower data rates, while others target different environmental ranges or common-mode performance. For that reason, an alternative should be checked against the required bus rate, supply voltage, logic levels, termination strategy, and operating-temperature range rather than selected from the package name alone.
Typical uses include industrial serial links, programmable-logic controllers, test equipment, building automation, data acquisition systems, and embedded control boards. The 10Mbps capability is useful for factory links, while the 3.3V supply operation aligns with modern controller and digital logic rails. The 1/1 driver-receiver arrangement supports one communication channel per device.
A robust implementation requires correct logic-family interfacing, a bypass capacitor near the supply pin, a controlled ground-return path, and termination appropriate to the cable topology. Designers should also evaluate the transceiver's bus loading and common-mode limits against the longest cable and highest-noise operating condition. Slew-rate control reduces edge energy, but it does not replace correct topology, grounding, and cable-length planning.
This product page consolidates the manufacturer's device characteristics, sourcing guidance, compatible alternatives, and practical interface-design considerations into a single engineering-focused reference for evaluating the MAX3488CSA+T in 3.3V RS-485 and RS-422 systems.
جێگرەوەکانی جێگۆڕکێ بۆ MAX3488CSA+T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3488CSA+T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Cable Reflection Control, RoHS Status, Maximum Data Rate, Driver Count.
MAX3488ESA+T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3490EESA+
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3483CSA+
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX488ECSA+T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LTC2851CS8#PBF
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX3488CSA+T تایبەتمەندییەکان
| Product Type | RS-485/RS-422 transceiver |
| Number of Drivers | 1 driver |
| Number of Receivers | 1 receiver |
| Supply Voltage Range | 3 V to 3.6 V |
| Maximum Data Rate | 10 Mbps |
| Driver Edge Rate | Slew-rate limited |
| Supported Protocols | RS-422 and RS-485 |
| پاکێج | 8-SOIC, 0.154 m body width and 3.90 mm overall width |
| ژمارەی پینەکان | 8 pins |
| جۆری دامەزراندن | Surface mount |
| Packaging | Tape and reel |
| مەودای پلەی گەرمیی کارکردن | 0°C to +70°C |
| EMI Control | Slew-rate-limited driver reduces EMI |
| Cable Reflection Control | Reduced reflections from slew-rate limiting |
| Logic Compatibility | 3.3V transceiver interface |
ڕێنمایی ڕێکخستنی پینی MAX3488CSA+T 8-soic, 0.154 m body width and 3.90 mm overall width
ڕێکخستنی پین بۆ MAX3488CSA+T (پاکێجی 8-soic, 0.154 m body width and 3.90 mm overall width). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3488CSA+T.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX3488CSA+T گونجاوە بۆ 6 بەکارھێنانs: Industrial PLC Serial Links, Factory Automation Sensor Networks, Data Acquisition and Instrumentation, Building Automation Networks, Embedded Equipment Communication, Industrial Gate and Access Control.
Industrial PLC Serial Links
The MAX3488CSA+T fits 3.3V programmable-logic-controller links that require a one-driver/one-receiver RS-485 or RS-422 channel. Its 10 Mbps maximum data rate supports burst transfers, diagnostics, configuration data, and real-time commands, while the slew-limited driver reduces edge-related EMI. Place the transceiver between the controller UART and isolated or non-isolated differential bus, terminate the far end of the bus as appropriate, and preserve a common reference within the receiver's permitted common-mode range. The 0°C to +70°C rating suits controlled indoor factory equipment, but extended-temperature machinery should use a device rated for that environment.
پێشنیارکراو
Factory Automation Sensor Networks
The MAX3488CSA+T can connect a central controller to distributed sensors and actuators over a differential RS-485 bus. Its 3.3V operation matches low-voltage embedded controllers, and the 10 Mbps capability provides useful bandwidth for nodes that transmit compact measurement packets or configuration data. Slew-rate limiting helps reduce EMI and reflections on imperfectly terminated cables, although the designer must still minimize stub lengths and calculate the maximum node count from the transceiver's bus loading. A common ground reference or suitable isolation method is also required where the two ends of the bus can experience different ground potentials.
پێشنیارکراو
Data Acquisition and Instrumentation
The MAX3488CSA+T is appropriate for laboratory and process-instrumentation links where a compact controller must exchange commands and sampled data with a remote instrument. The combination of 3.3V operation, one driver, one receiver, and a 10 Mbps data rate supports responsive control traffic and efficient block transfers. Its differential RS-485 or RS-422 signaling improves noise immunity over longer interconnects. For bench systems, the design should include a defined cable ground, termination at the appropriate physical ends, protection against accidental handling, and separation from high-energy switching nodes that could exceed the transceiver's input common-mode range.
پێشنیارکراو
Building Automation Networks
The MAX3488CSA+T can serve as the physical-layer interface in a 3.3V building-controller or access-control subsystem using an RS-485 backbone. The 10 Mbps maximum rate leaves ample margin for short building-level segments and occasional firmware or configuration transfers, while slew-rate-limited outputs reduce conducted and radiated emissions. Long parallel branches should be avoided because they behave as stubs and can produce reflections. Use a linear bus topology, terminate only the designated endpoints, and provide an equipotential reference where practical. The 0°C to +70°C specification is appropriate for indoor control cabinets but not for outdoor equipment exposed to temperature extremes.
پێشنیارکراو
Embedded Equipment Communication
The MAX3488CSA+T is well suited to embedded boards that expose a legacy-style RS-485 or RS-422 field bus while using a modern 3.3V controller. Its 8-SOIC footprint simplifies board assembly, and the 10 Mbps capability supports both low-rate control traffic and faster diagnostic or data-log transfers. The logic interface should be checked for TTL or CMOS compatibility, and the UART baud rate should remain appropriate for the implemented protocol rather than relying on the transceiver's maximum electrical capability. Provide local supply bypassing, a continuous return path, and ESD protection where field cables enter the enclosure.
پێشنیارکراو
Industrial Gate and Access Control
The MAX3488CSA+T can connect an access-control controller, gate reader, or alarm panel to a short RS-485 peripheral bus. Differential signaling reduces susceptibility to the motor and relay noise commonly present around gate equipment, and the 10 Mbps rating comfortably supports command polling and status reporting. The transceiver's slew-rate-limited output also helps limit high-frequency emissions from the cable. Designers should separate the communication wiring from motor and solenoid power paths, use twisted-pair cabling, and include surge or ESD protection at the external connector. Confirm the ground reference and cable length against the receiver's common-mode limits before installation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX3488CSA+T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX3488ESA+T | MAX3490EESA+ | MAX3483CSA+ | MAX488ECSA+T | LTC2851CS8#PBF |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Linear Technology |
| Supported Protocols | RS-422 / RS-485 | RS-422 / RS-485 | RS-422 / RS-485 | RS-422 / RS-485 | RS-422 / RS-485 | RS-485 |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
جیاکەرەوە سەرەکییەکان
- Higher data-rate capability (بەراورد بەMAX3483CSA+)
- Direct same-footprint family substitution (بەراورد بەMAX3488ESA+T)
- 3.3V operation with 8-SOIC footprint (بەراورد بەLTC2851CS8#PBF)
تێبینییەکانی دیزاین
Place the transceiver close to the connector and route the differential pair as a short, continuous 8-SOIC-compatible pair. Keep the logic-side traces away from the bus connector and switching-power circuitry. Connect the bus ground reference with a low-impedance return path, and avoid placing test points that create unbalanced stubs on the differential lines.
Use a linear RS-485 bus with termination only at the two physical endpoints. Avoid long branches and star connections because each branch behaves as a transmission-line stub and can create reflections. For the MAX3488CSA+T, account for the 10 Mbps capability when selecting cable type, stub lengths, and connector layout; high data rates require tighter physical implementation than low-speed field buses.
Do not assume that any RS-485-compatible 8-SOIC device is a drop-in replacement. Compare the MAX3488CSA+T pin description against the candidate's driver input, driver output, receiver input, receiver output, enable, shutdown, ground, and supply connections. Also verify operating temperature, supply range, maximum data rate, receiver thresholds, and bus loading before approving a board change.
زانیاری پابەندبوون
The manufacturer product page identifies the MAX3488 family as production, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact ordering code.