MC908AS60ACFNE - 8-bit HC08 MCU 60KB Flash 8.4MHz PLCC-52 | NXP
MPN: MC908AS60ACFNE ✗ کۆتایی ژیانMC908AS60ACFNE گشتی
A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and integrated peripherals. The HC08 family represents the 8-bit branch of the broader Motorola/Freescale/NXP M68HCxx lineage, which sits within the larger category of embedded microcontrollers -> microprocessors -> digital ICs -> semiconductors. The 8-bit MCU segment remains relevant for cost-sensitive, deterministic, low-power embedded applications where ARM Cortex-M overhead is unnecessary.
Key features of the MC908AS60ACFNE include 60KB (60K x 8) of FLASH program memory, 2KB of on-chip EEPROM for non-volatile data storage, an internal 8.4 MHz bus clock derived from the on-chip oscillator, and the standard HC08 peripheral set. The 52-pin PLCC package provides ample I/O for automotive body, appliance, and industrial control applications and supports surface-mount assembly with J-leads.
Architecturally, the device uses the enhanced CPU08 core, which adds a few instructions and addressing modes over the original HC08 core while preserving code compatibility. The FLASH/EEPROM split enables field re-programmability for calibration data and protocol parameters, a useful feature for late-stage product customization or firmware updates.
Typical applications include automotive body controllers, HVAC controls, appliance motor control, industrial sensor interface boards, and legacy embedded systems requiring proven 8-bit processing. The HC08AS/AZ family was widely adopted in automotive clusters and instrument panels.
When designing with this MCU, note the End-of-Life status - qualify a successor early or commit to a last-time-buy inventory plan. Engineers should also evaluate migration paths to the S08 or S12 families for new designs since tooling, compilers, and development support for legacy HC08 parts are increasingly community-maintained.
This page synthesizes distributor inventory data, drop-in replacement candidates from the HC08 family, and practical design considerations not found in the original manufacturer datasheet.
جێگرەوەکانی جێگۆڕکێ بۆ MC908AS60ACFNE — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MC908AS60ACFNE (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Core Architecture, EEPROM Size, Mounting Type, Package.
MC908AS60ACFN
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MC908AS60ACFNR2
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MC908AS60ACFU
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MC908AS60ACFNE
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MC908AZ60ACFNE
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MC908AS60ACFNE زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Core Processor | HC08 (CPU08) |
| Core Architecture | 8-bit M68HC08 |
| Family | HC08AS/AZ (MC908AS60 series) |
| Program Memory Size | 60 KB (60K x 8) FLASH |
| EEPROM Size | 2 KB (2K x 8) |
| زۆرترین فرێکوێنسیی کاتژمێر | 8.4 MHz |
| پاکێج | 52-PLCC (J-Lead), 19.1 x 19.1 mm |
| جۆری دامەزراندن | Surface Mount |
ڕێکخستنی پینی MC908AS60ACFNE
| پین 1 | IRQ — External interrupt request input |
| پین 2 | TCLK — Timer external clock input |
| پین 3 | PTA0/KBD0 — Port A bit 0 / keyboard wakeup |
| پین 4 | PTA1/KBD1 — Port A bit 1 / keyboard wakeup |
| پین 5 | PTA2/KBD2 — Port A bit 2 / keyboard wakeup |
| پین 6 | PTA3/KBD3 — Port A bit 3 / keyboard wakeup |
| پین 7 | PTA4/KBD4 — Port A bit 4 / keyboard wakeup |
| پین 8 | PTA5/KBD5 — Port A bit 5 / keyboard wakeup |
| پین 9 | PTA6/KBD6 — Port A bit 6 / keyboard wakeup |
| پین 10 | PTA7/KBD7 — Port A bit 7 / keyboard wakeup |
| پین 11 | VSS — Ground |
| پین 12 | VDD — Positive supply voltage |
| پین 13 | PTB0/ADC0 — Port B bit 0 / ADC channel 0 |
| پین 14 | PTB1/ADC1 — Port B bit 1 / ADC channel 1 |
| پین 15 | PTB2/ADC2 — Port B bit 2 / ADC channel 2 |
| پین 16 | PTB3/ADC3 — Port B bit 3 / ADC channel 3 |
| پین 17 | PTB4/ADC4 — Port B bit 4 / ADC channel 4 |
| پین 18 | PTB5/ADC5 — Port B bit 5 / ADC channel 5 |
| پین 19 | PTB6/ADC6 — Port B bit 6 / ADC channel 6 |
| پین 20 | PTB7/ADC7 — Port B bit 7 / ADC channel 7 |
| پین 21 | PTC0 — Port C bit 0 |
| پین 22 | PTC1 — Port C bit 1 |
| پین 23 | PTC2 — Port C bit 2 |
| پین 24 | PTC3 — Port C bit 3 |
| پین 25 | PTC4 — Port C bit 4 |
| پین 26 | PTC5 — Port C bit 5 |
| پین 27 | PTC6 — Port C bit 6 |
| پین 28 | PTC7 — Port C bit 7 |
| پین 29 | PTD0/SS — Port D bit 0 / SPI slave select |
| پین 30 | PTD1/MISO — Port D bit 1 / SPI MISO |
| پین 31 | PTD2/MOSI — Port D bit 2 / SPI MOSI |
| پین 32 | PTD3/SPSCK — Port D bit 3 / SPI clock |
| پین 33 | PTD4/TxD — Port D bit 4 / SCI transmit |
| پین 34 | PTD5/RxD — Port D bit 5 / SCI receive |
| پین 35 | PTD6 — Port D bit 6 |
| پین 36 | PTD7 — Port D bit 7 |
| پین 37 | PTE0 — Port E bit 0 |
| پین 38 | PTE1 — Port E bit 1 |
| پین 39 | PTE2 — Port E bit 2 |
| پین 40 | PTE3 — Port E bit 3 |
| پین 41 | PTE4 — Port E bit 4 |
| پین 42 | PTE5 — Port E bit 5 |
| پین 43 | PTE6 — Port E bit 6 |
| پین 44 | PTE7 — Port E bit 7 |
| پین 45 | OSC1 — Crystal oscillator input |
| پین 46 | OSC2 — Crystal oscillator output |
| پین 47 | RESET — Reset input (active low) |
| پین 48 | BKGD/MS — Background debug mode / mode select |
| پین 49 | VPP — FLASH programming voltage |
| پین 50 | VSS — Ground |
| پین 51 | VDD — Positive supply voltage |
| پین 52 | NC — Not connected (per datasheet) |
بەکارهێنانە باوەکان
MC908AS60ACFNE گونجاوە بۆ 6 بەکارھێنانs: Automotive Body Controller, HVAC Control Module, Appliance Motor Controller, Industrial Sensor Interface Board, Automotive Instrument Cluster, Legacy Embedded System Maintenance.
Automotive Body Controller
The MC908AS60ACFNE's 60KB FLASH, 2KB EEPROM, and 8.4 MHz CPU08 core suit automotive body controllers managing door locks, window lifts, seat memories, and lighting. The HC08 deterministic interrupt handling and 52-PLCC package with socket compatibility made this part a 2000s-era workhorse for body electronics. Its EEPROM supports persistent configuration storage for VIN-linked personalization data that survives battery disconnect. The EOL status requires lifecycle planning: qualify a S08 or S12 successor now or commit to a last-time-buy inventory buffer sized to cover the program's production lifetime.
پێشنیارکراو
HVAC Control Module
HVAC control modules require deterministic response to sensor inputs and reliable actuator drive sequencing, both of which the MC908AS60ACFNE's 8-bit CPU08 core delivers at 8.4 MHz. The 60KB FLASH holds the blower, blend-door, and temperature-control algorithms; the 2KB EEPROM stores calibration coefficients learned during factory test. With ample I/O on the 52-PLCC package, the MCU interfaces directly to NTC temperature sensors, potentiometer inputs, and backlight drivers without external I/O expanders. Migration to the S08 family is straightforward for new HVAC designs.
پێشنیارکراو
Appliance Motor Controller
Washing machines, dishwashers, and dryers historically used the HC08AS/AZ family for motor timing, pump control, and user-interface management. The MC908AS60ACFNE's 8.4 MHz core and 2KB EEPROM handle brushed and BLDC motor commutation tables plus wash-cycle state machines with deterministic timing. PLCC packaging enables through-hole or socketed assembly for service-friendly appliance designs. The EOL transition means appliance OEMs must re-qualify firmware on the S08 platform or commit to a multi-year last-time-buy stockpile sized to the appliance's market life.
پێشنیارکراو
Industrial Sensor Interface Board
Industrial sensor interface boards aggregate 4-20 mA loops, thermocouples, and digital inputs into a network-attached module. The MC908AS60ACFNE's 8-bit CPU08 and 60KB FLASH are well-suited to protocol conversion (Modbus RTU to HART or proprietary buses), with the 2KB EEPROM storing calibration coefficients and node configuration. Its deterministic interrupt response suits time-critical sensor polling. For new industrial designs, the S08 family with enhanced peripherals and longer lifecycle is preferred, but the legacy MC908AS60ACFNE continues to serve installed bases and retrofits.
پێشنیارکراو
Automotive Instrument Cluster
Instrument clusters of the late 1990s and 2000s relied on HC08-family MCUs to drive stepper-motor gauges, read speedometer/tachometer inputs, and manage warning lamps. The MC908AS60ACFNE's 8.4 MHz bus clock and 60KB FLASH drove stepper motor control loops for fuel and temperature gauges, plus odometer storage in EEPROM. Its 52-PLCC footprint was common across multiple cluster programs. Modern replacements use S12 or S08 derivatives; existing production continues to source this EOL part through authorized distributors.
پێشنیارکراو
Legacy Embedded System Maintenance
Long-life programs in industrial automation, building controls, and military systems continue to use the MC908AS60ACFNE because the firmware was qualified years ago and re-certification costs are prohibitive. The part's EOL status triggers last-time-buy inventory planning: OEMs must forecast remaining production volume and place a single bulk purchase. Authorized distributors hold remaining stock; aftermarket brokers and obsolete-parts specialists provide secondary sourcing. EEPROM-backed configuration data preserves system calibration across decades of operation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MC908AS60ACFNE — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MC908AS60ACFN | MC908AS60ACFNR2 | MC908AS60ACFU | MC908AS60ACFNE | MC908AZ60ACFNE |
|---|---|---|---|---|---|---|
| Package | 52-PLCC (J-Lead) | 52-PLCC (J-Lead) - same | 52-PLCC (J-Lead) - same | 52-PLCC (J-Lead) - same | 52-PLCC (J-Lead) - same | 52-PLCC (J-Lead) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HC08 (CPU08) 8-bit | HC08 (CPU08) 8-bit | HC08 (CPU08) 8-bit | HC08 (CPU08) 8-bit | HC08 (CPU08) 8-bit | HC08 (CPU08) 8-bit |
| FLASH Memory | 60 KB | 60 KB | 60 KB | 60 KB | 60 KB | 60 KB |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| Max Clock | 8.4 MHz | 8.4 MHz | 8.4 MHz | 8.4 MHz | 8.4 MHz | 8.4 MHz |
| Pin Count | 52 | 52 | 52 | 52 | 52 | 52 |
| Lifecycle Status | EOL | EOL | EOL | EOL | EOL | EOL |
| AEC-Q100 Qualified | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown |
جیاکەرەوە سەرەکییەکان
- Established automotive body-control heritage (بەراورد بەMC908AS60ACFN (same die, tube packaging))
- HC08AZ60 variant available in same package (بەراورد بەMC908AZ60ACFNE)
- 52-PLCC socket-friendly package (بەراورد بەModern QFP/LQFP MCU packages)
تێبینییەکانی دیزاین
Because the MC908AS60ACFNE is in End-of-Life status, the most critical design consideration is lifecycle planning. For new designs, qualify the S08AC family (e.g., MC9S08AC60CFGE) immediately rather than building inventory around an EOL part. For existing production, place a last-time-buy sized to your entire product lifetime plus a safety buffer for warranty service. Counterfeit risk rises sharply on EOL 8-bit MCUs; purchase only from authorized distributors with full traceability documentation.
Place the HC08 decoupling capacitors (typically 100 nF ceramic plus 10 uF bulk) as close to VDD/VSS pins as physically possible. The 52-PLCC package has two VDD and two VSS pins on opposite sides - place one 100 nF cap per VDD pin. Route the OSC1/OSC2 crystal traces short and symmetric, surrounded by ground pour, to minimize EMI and ensure stable clock startup. Keep the RESET pin trace short and add a 10 kohm pullup to VDD if the application environment has noise.
The FLASH and EEPROM endurance specifications must be respected: EEPROM typically supports 100k write cycles minimum, FLASH 10k cycles. Implement wear-leveling or store changing data in RAM backed by a battery/supercap rather than burning EEPROM cycles on hot counters. Use the HC08 BDM interface for in-circuit programming during development - production programming should use a standalone programmer for faster throughput.
زانیاری پابەندبوون
Compliance documentation not provided in verified web data. Check specific lot certificate of conformance with the distributor. Many 2000s-era HC08 parts were produced in both lead-free and leaded finishes depending on date code.