MC908JL3ECDWE - 8-Bit 8MHz 4KB MCU | NXP | 28-SOIC
MPN: MC908JL3ECDWE ✗ کۆتایی ژیانMC908JL3ECDWE گشتی
An MCU is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device. A microcontroller is therefore more specific than a general-purpose microprocessor: the embedded system can execute firmware and control I/O without requiring a separate external memory device. In the M68HC08 hierarchy, this device is an 8-bit MCU using the CPU08 central processing unit.
Verified distributor information identifies the MC908JL3ECDWE as an HC08 device with 8-bit architecture, 8 MHz operation, and 4 KB, or 4K by 8, Flash memory. Its 28-SOIC package supports surface mounting on existing legacy boards. The listed 3.3 V and 5 V compatibility is useful when servicing equipment designed around either supply level. Exact RAM, peripheral, electrical-limit, and temperature-range values were not supplied in the verified search data and therefore remain marked for data confirmation.
Typical uses for this class of controller include appliance controls, industrial equipment, instrumentation, simple motor-control nodes, and legacy embedded systems. Before substituting any MPN, engineers should compare the complete pinout, memory map, clock behavior, interrupt vector table, peripherals, electrical limits, and firmware compatibility. A matching package alone does not guarantee a functional drop-in replacement.
For a new design, prioritize an NXP part that NXP currently recommends for new designs. For an existing board, preservation of the original part number is preferable because changing instruction sets, peripherals, pin multiplexing, or memory organization can require firmware and hardware changes. The SOIC footprint is also larger than many current MCU packages, although that difference may be irrelevant when repairing an existing PCB.
جێگرەوەکانی جێگۆڕکێ بۆ MC908JL3ECDWE — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MC908JL3ECDWE (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Core, Program Memory, Program Memory Size.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەMC908JL3ECDWE زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit microcontroller unit (MCU) |
| Architecture | 8-bit HC08 CISC |
| CPU | M68HC08 CPU08 core |
| زۆرترین فرێکوێنسیی کاتژمێر | 8 MHz |
| Flash Memory | 4 KB (4K x 8) |
| Program Memory Type | Flash |
| Supply Compatibility | 3.3 V and 5 V |
| پاکێج | 28-pin SOIC wide |
| جۆری دامەزراندن | Surface mount |
| Series | MC908 |
| Microcontroller Family | M68HC08 |
| دۆخی چرخەی ژیان | Obsolete |
| Lead-Free Status | PB-free finished goods |
| Program Memory Words | 4096 x 8 bits |
| Maximum Pin Count | 28 pins |
ڕێنمایی ڕێکخستنی پینی MC908JL3ECDWE 28-pin soic wide
ڕێکخستنی پین بۆ MC908JL3ECDWE (پاکێجی 28-pin soic wide). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MC908JL3ECDWE.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MC908JL3ECDWE گونجاوە بۆ 6 بەکارھێنانs: Legacy Appliance Control, Industrial Instrumentation Repair, Simple Motor-Control Node, Embedded Data Acquisition, IoT Sensor Gateway Retrofit, Educational Electronics Platform.
Legacy Appliance Control
The MC908JL3ECDWE fits maintenance of an appliance controller that was designed around the 8-bit M68HC08 family, an 8 MHz operating point, and 4 KB of Flash. Its 28-SOIC package allows reuse of the original board footprint when components have been removed. The verified 3.3 V and 5 V compatibility can simplify inspection across related equipment revisions. Because the MCU is obsolete, engineers should prefer an exact original part, verify its date code, and preserve the existing firmware rather than assuming that a family variant is interchangeable.
پێشنیارکراو
Industrial Instrumentation Repair
The 8-bit CPU08 architecture and 4 KB program memory make the MC908JL3ECDWE relevant to legacy instruments that perform compact sequencing, measurement conditioning, status reporting, or actuator control. An 8 MHz clock supports the original product's control tasks, while the 28-SOIC package preserves established routing. For maintenance, first confirm the exact MCU marking and compare reset and peripheral connections. A newer controller should be selected for long-term availability when a redesign is acceptable, with firmware and board validation planned in parallel.
پێشنیارکراو
Simple Motor-Control Node
The MC908JL3ECDWE can be retained in a legacy low-speed motor-control or sequencing node when the existing firmware already matches its CPU08 core, 4 KB Flash, and peripheral configuration. Its 8 MHz operation and surface-mount 28-SOIC construction suit compact control boards built around the original design. Supply voltage must match the supported 3.3 V or 5 V equipment architecture. Do not substitute solely by family name, because timer channels, pin multiplexing, edge behavior, and drive timing must remain compatible with the existing firmware and power stage.
پێشنیارکراو
Embedded Data Acquisition
The MC908JL3ECDWE can support a legacy acquisition controller when it performs sensor selection, digital filtering, status logging, and communication through already verified board peripherals. Its 4 KB Flash constrains firmware size, while the 8 MHz HC08 core matches the processing assumptions of the original product. For an operating instrument, exact-part preservation reduces the chance of introducing sampling or timing changes. Confirm sensor interfaces, serial baud-rate support, ADC resources, and calibration routines from the complete manufacturer documentation before installation.
پێشنیارکراو
IoT Sensor Gateway Retrofit
The MC908JL3ECDWE may serve in a brownfield IoT retrofit where an existing 28-SOIC controller board reads local sensors and drives indicators or relays. The verified 8 MHz HC08 performance and 4 KB Flash are suitable only when the current firmware already fits that resource envelope. Compatibility with 3.3 V and 5 V helps during mixed-generation repairs. For connected equipment, cybersecurity and long-term supply constraints favor a supported MCU unless preserving the old controller is essential; any communication implementation should be audited before field deployment.
پێشنیارکراو
Educational Electronics Platform
The MC908JL3ECDWE remains useful for training an existing HC08 laboratory board because students can preserve the original CPU08 firmware, 28-SOIC footprint, and 8 MHz operating assumptions. It provides a concrete platform for studying an 8-bit CISC microcontroller, embedded memory, reset behavior, interrupts, and peripheral control. Because the part is obsolete, schools should inventory test samples and plan a planned migration before acquiring large quantities. Replacement boards should use a supported MCU and updated teaching material rather than treating unrelated HC08 models as pin-compatible.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MC908JL3ECDWE — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
جیاکەرەوە سەرەکییەکان
- Original CPU08 architecture and memory configuration (بەراورد بەMC908JL3EMDWE)
- Exact-part maintenance support (بەراورد بەMC908JK8CDWE)
- Known supply-voltage compatibility (بەراورد بەMC908JK1ECDWER)
تێبینییەکانی دیزاین
Do not infer pin compatibility from an HC08 family name. Confirm the exact package suffix, all 28 pin assignments, programming signals, reset behavior, clock pins, and alternate peripheral functions against the manufacturer data sheet. Several related MC908 identifiers appeared in the supplied search results, but no candidate was proven to be a drop-in replacement. For maintenance, use the original MPN whenever possible and verify the device marking, pin count, and supply requirements before soldering.
Identify whether the target board uses 3.3 V or 5 V before replacing the MCU. Both levels are mentioned in the verified source snippets, but maximum voltage, current, and detailed operating limits are not supplied. Check the board's regulator ratings, decoupling, reset pull-up, and programming-interface voltage. Misconnecting VDD or exposing an unsupported input voltage can permanently damage an obsolete replacement that may be difficult to source.
Preserve the original 28-SOIC land pattern and verify the package variant is the wide-body form associated with the target board. Inspect whether any replacement candidate has different terminal width, lead pitch, pin numbering, or exposed thermal features; the supplied evidence does not establish such compatibility. Clean pad oxidation, use appropriate lead-free rework profiles, and inspect the underside for bridging after reflow because adjacent 28-pin pads can short if solder bridges are not removed.
زانیاری پابەندبوون
Mouser identifies the part as PB-free finished goods. Explicit RoHS, REACH, halogen-free, and conflict-minerals statements were not present in the supplied verified data.