NXP Semiconductors

MC9S08SH4CPJ - 40MHz 8-Bit MCU with 4KB Flash | NXP

MPN: MC9S08SH4CPJ ✓ چالاک
3.3 V / 5 V Vdss 20-DIP Package 40 MHz Speed 4 KB Memory
MOQ: 1 |

MC9S08SH4CPJ گشتی

NXP MC9S08SH4CPJ is an 8-bit S08SH-series microcontroller built around a 40 MHz HCS08 processor, with 4 KB of Flash program memory and a 20-pin DIP package. It targets compact 5 V control systems and combines an HC08-compatible instruction set with serial communications interface, serial peripheral interface, I2C, a 12-channel 10-bit analog-to-digital converter, and analog peripherals. The 0.300-inch, 7.62 mm lead pitch supports conventional through-hole assembly and educational or industrial control prototypes.

An S08 microcontroller is an embedded processor family designed for compact control tasks such as sensing, actuator control, communications, and simple product automation. The S08SH series occupies the low end of the NXP S08 portfolio and provides a direct migration path toward the pin-, tool-, and software-compatible S08SG family. This makes the MC9S08SH4CPJ useful where a small flash footprint, straightforward peripherals, and a familiar development environment are more important than a high pin count.

Key features include 40 MHz operation, 8-bit processing, 4 KB of Flash memory, support for up to 32 interrupt and reset sources, and 10-bit ADC conversion in 2.5 microseconds. The integrated communication interfaces allow the MCU to connect sensors, displays, transceivers, and external converters without requiring separate interface devices. The 3.3 V and 5 V operating choices also accommodate legacy industrial and embedded-control systems.

The HCS08 CPU uses the HC08 instruction set with the added BGND instruction. At its 40 MHz operating frequency, the processor provides considerably more timing margin than many simple 8-bit applications require, allowing designers to combine control-loop work with serial communications and periodic analog sampling. The 12-channel ADC, automatic compare function, and internal temperature-sensor capability further reduce the number of external components needed for basic monitoring functions.

Typical applications include educational motor-control platforms, simple sensor nodes, compact keypad interfaces, LED-control boards, basic industrial controllers, and low-cost communication equipment. The 20-pin DIP package is particularly useful when a controller must be assembled on a perfboard, prototype PCB, or manually serviced assembly rather than a highly automated surface-mount line.

Design around the device's 5 V application focus and confirm the operating-voltage requirements of every attached peripheral. Place the MCU's decoupling capacitors close to the supply pins, route analog inputs away from fast switching nodes, and follow the NXP pin-description table when assigning the 20 DIP leads. The S08SH-to-S08SG compatibility can aid design expansion, but memory size and peripheral availability must be checked for the selected replacement.

This page consolidates the manufacturer's device description with package characteristics, interface details, drop-in-family candidates, and practical selection guidance for engineers evaluating the MC9S08SH4CPJ.

جێگرەوەکانی جێگۆڕکێ بۆ MC9S08SH4CPJ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MC9S08SH4CPJ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Mounting Type, Connectivity, Number of I/O, Operating Temperature.

NXP Semiconductors
Package: 16-TSSOP (VTG) - 4.4 mm body
Mounting Type: Surface Mount
Connectivity: LINbus, SPI, UART/USART
بەراوردکردن لەگەڵ MC9S08SH4CPJ →
NXP Semiconductors
Package: 16-TSSOP (VTG) - 4.4 mm body
Mounting Type: Surface Mount
Connectivity: LINbus, SPI, UART/USART
بەراوردکردن لەگەڵ MC9S08SH4CPJ →
NXP Semiconductors
Package: 8-SOIC
Mounting Type: Surface Mount
بەراوردکردن لەگەڵ MC9S08SH4CPJ →
NXP Semiconductors
Package: 20-DIP (PDIP), 0.300 inch, 7.62mm
Connectivity: I2C, LIN, SCI, SPI
Number of I/O: 17
بەراوردکردن لەگەڵ MC9S08SH4CPJ →

MC9S08SH2CPJ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 20-DIP
Uses the same 40 MHz S08SH platform and 20-DIP footprint, but Flash decreases from 4 KB to 2 KB (-50%); firmware size must fit within 2 KB

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MC9S08SH8CPJ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
NXP Semiconductors
📦 20-DIP
8-bit HCS08 microcontroller · S08 · CISC · 40 MHz · 8KB (8K x 8) · 3.3V or 5V · 20-DIP (PDIP), 0.300 inch, 7.62mm · 17

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MC9S08SH4CPJ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit HCS08 microcontroller
Series S08SH
Maximum CPU Frequency 40 MHz
CPU Architecture 8-bit HCS08
Instruction Set HC08 instruction set with added BGND instruction
Flash Memory 4 KB
Flash Organization 4K x 8
ADC Resolution 10 bit
ADC Channel Count 12 channels
ADC Conversion Time 2.5 us
ADC Feature Automatic compare function
Integrated Temperature Sensor Yes
Serial Communications Interface SCI interface
Serial Peripheral Interface SPI interface
Inter-Integrated Circuit Interface I2C interface
Interrupt and Reset Sources Up to 32 sources
ڤۆڵتیەی دابینکردن 3.3 V / 5 V
Target Voltage Range 5 V applications
پاکێج 20-DIP
Package Body Width 0.300 inch (7.62 mm)
جۆری دامەزراندن Through-hole
دۆخی چرخەی ژیان Active

ڕێنمایی ڕێکخستنی پینی MC9S08SH4CPJ 0.300 inch (7.62 mm)

ڕێکخستنی پین بۆ MC9S08SH4CPJ (پاکێجی 0.300 inch (7.62 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 0.300 inch (7.62 mm) بۆ MC9S08SH4CPJ

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MC9S08SH4CPJ.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MC9S08SH4CPJ گونجاوە بۆ 6 بەکارھێنانs: Educational Motor-Control Platform, Compact Sensor-Node Controller, Basic Industrial Control Module, LED and Keypad Interface Board, Temperature and Analog Monitoring Unit, Low-Cost Communication Controller.

🏭

Educational Motor-Control Platform

The MC9S08SH4CPJ fits an educational motor-control platform that requires a fast 8-bit core, mixed analog and digital functions, and simple through-hole assembly. Its 40 MHz HCS08 processor provides timing margin for pulse-width modulation, input sampling, and user-interface updates, while the 12-channel 10-bit ADC can monitor analog control signals. The 20-DIP package with a 0.300-inch, 7.62 mm lead pitch is easy to install on educational boards and prototype instruments.

🧩

Compact Sensor-Node Controller

MC9S08SH4CPJ is appropriate for a compact sensor node that gathers analog measurements and forwards information over a short serial link. The 12-channel, 10-bit ADC supports multiple sensor inputs, with a documented 2.5 microsecond conversion time, while SCI, SPI, and I2C provide options for connecting a sensor, display, or radio module. Its 4 KB Flash capacity suits a focused acquisition and control program, and the 20-pin DIP construction simplifies prototype assembly and replacement.

🏭

Basic Industrial Control Module

The MC9S08SH4CPJ can serve as the central controller in a basic 5 V industrial module handling discrete inputs, analog measurements, and remote communications. The 40 MHz processor supports responsive task scheduling, and the integrated SCI, SPI, and I2C interfaces reduce the need for separate protocol converters. Its 12-channel ADC and automatic compare function suit threshold-based supervision, while the DIP package allows straightforward replacement on control boards that use through-hole assembly.

💡

LED and Keypad Interface Board

MC9S08SH4CPJ works well in an LED or keypad interface board where a low-cost 8-bit MCU must scan inputs and update multiple outputs. Its 40 MHz operating speed leaves substantial processing margin for debouncing, display refresh, and communication tasks. The 3.3 V and 5 V operating choices support both legacy and modern peripheral arrangements, and the 20-DIP package simplifies manual soldering, prototyping, and field replacement compared with a leadless package.

💊

Temperature and Analog Monitoring Unit

The MC9S08SH4CPJ is suitable for a dedicated temperature and analog monitoring unit because it combines a 12-channel 10-bit ADC, automatic compare capability, and an integrated temperature sensor. The 40 MHz core can perform periodic acquisition, filtering, threshold evaluation, and serial reporting within a compact 20-DIP footprint. Its 4 KB flash program space is appropriate for focused monitoring logic, while SCI or I2C can carry readings to a host controller or local display.

🌐

Low-Cost Communication Controller

MC9S08SH4CPJ can act as a low-cost communication controller for an embedded peripheral that must combine serial traffic with local control functions. SCI, SPI, and I2C interfaces are integrated on the device, allowing protocol-specific hardware connections without multiple interface packages. The 40 MHz 8-bit processor provides service capacity for framing, acknowledgments, status reporting, and actuator commands, while the 20-DIP package is practical for rapid prototype construction and low-volume control boards.

What are the key specifications of MC9S08SH4CPJ that engineers should know?
The MC9S08SH4CPJ is an 8-bit S08SH microcontroller with a 40 MHz HCS08 processor, 4 KB of Flash memory, and a 20-pin DIP package. It includes SCI, SPI, I2C, and a 12-channel 10-bit ADC with a stated 2.5 microsecond conversion time. According to the NXP MC9S08SH4 product documentation, the S08SH family targets 5 V applications and is pin-, tool-, and software-compatible with S08SG devices.
What is the operating voltage of MC9S08SH4CPJ?
The MC9S08SH4CPJ is identified as a 3.3 V and 5 V microcontroller, with the S08SH family specifically positioned for 5 V applications. According to the NXP MC9S08SH4 product documentation, the device belongs to a low-end 8-bit family designed around the 5 V range. Check each external peripheral's voltage requirements before connecting it to the MCU supply and I/O pins.
Where can I download the MC9S08SH4CPJ datasheet?
The MC9S08SH4CPJ datasheet and supporting documents are available through the official NXP product page at https://www.nxp.com/part/MC9S08SH4CPJ. That page identifies the device as an S08SH-family 8-bit MCU with a 40 MHz processor, 4 KB of Flash, SCI, SPI, I2C, and ADC capabilities. Use the manufacturer's pin-description and electrical-characteristics tables when assigning PCB tracks.
Where can I find the MC9S08SH4CPJ pinout?
The MC9S08SH4CPJ uses a 20-pin DIP footprint with a 0.300-inch, 7.62 mm lead pitch. Its complete pin assignments should be taken from the pin-description table in the NXP device documentation rather than inferred from another S08 package. The package contains 20 physical leads, but the visible list on this page is intentionally not reconstructed without a verified manufacturer pin table.
What can replace MC9S08SH4CPJ?
The closest same-family replacement is another 20-pin S08SH device with the same CPU, voltage range, and peripheral architecture, provided its Flash capacity and temperature grade meet the design requirements. MC9S08SH2CPJ and MC9S08SH8CPJ are family candidates, but their 2 KB and 8 KB Flash capacities differ from the target's 4 KB. Verify pin assignments, firmware memory requirements, and qualification before replacement.
Is MC9S08SH4CPJ suitable for 5 V industrial control applications?
Yes, the MC9S08SH4CPJ is suitable for compact 5 V control applications when the required interfaces and processing speed are modest. Its 40 MHz HCS08 core, SCI, SPI, I2C, and 12-channel 10-bit ADC provide the basic functions expected in sensing, monitoring, and actuator-control systems. Its 20-pin DIP package also simplifies manual assembly and prototype rework compared with a fine-pitch surface-mount package.
What is the difference between MC9S08SH4CPJ and MC9S08SH8CPJ?
The principal documented difference is Flash capacity: MC9S08SH4CPJ contains 4 KB, while MC9S08SH8CPJ contains 8 KB. Both belong to the 20-pin S08SH family and use the same 40 MHz, 8-bit S08 architecture. A device with 8 KB provides twice the program-memory capacity of the target, while a 4 KB target can use less flash for firmware and data storage.
When should I choose MC9S08SH4CPJ over MC9S08SH8CPJ?
Choose MC9S08SH4CPJ when a 4 KB flash allowance is sufficient and the 20-pin DIP S08SH platform meets the assembly and connectivity requirements. Choose MC9S08SH8CPJ when firmware growth or data storage requires 8 KB of program memory. Both provide the same 40 MHz S08 processing platform and 20-pin package family, so memory capacity is the principal selection criterion documented for these options.
What is the best equivalent for MC9S08SH4CPJ?
The best equivalent must match the 20-DIP footprint, 3.3 V and 5 V operating environment, 40 MHz processor class, and required S08 peripherals. MC9S08SH8CPJ is the closest higher-memory family candidate because it retains the 20-pin package while doubling Flash to 8 KB. No cross-brand drop-in candidate is documented for this device, so an equivalent should not be selected solely by matching clock speed and pin count.
Is MC9S08SH4CPJ the same as an S08SG microcontroller?
No, MC9S08SH4CPJ belongs to the S08SH family, but NXP states that S08SH devices are pin-, tool-, and software-compatible with S08SG devices. This compatibility broadens design flexibility, but it does not mean every S08SG part has identical memory, pin assignments, or peripherals. Select the exact S08SG MPN only after checking its package, Flash and RAM requirements, operating conditions, and peripheral map.
How much ADC performance does MC9S08SH4CPJ provide?
MC9S08SH4CPJ provides a 12-channel, 10-bit ADC with a stated conversion time of 2.5 microseconds. The documented automatic compare function supports threshold-oriented measurements and control tasks, while the integrated temperature sensor adds another internal measurement source. According to the S08SH documentation, these functions reduce the need for external analog components in compact monitoring and control systems.
Where can I buy MC9S08SH4CPJ online?
Use the Request a Quote form on this page to request MC9S08SH4CPJ availability, current lead time, and order handling. The manufacturer identifies the device as active, and the part is also listed by authorized distribution channels. Quote requests allow the exact 20-DIP ordering code, required quantity, and shipment destination to be confirmed without relying on a generic family-level price.
What is the price of MC9S08SH4CPJ?
MC9S08SH4CPJ pricing depends on quantity, order breaks, availability, and the confirmed 20-DIP ordering code. Submit a request through the Request a Quote form on this page for current commercial terms. The structured pricing fields are intentionally empty because no listing in the retrieved records presented an explicit quantity-and-price table for the exact MPN.
What is the lead time for MC9S08SH4CPJ?
Request the current MC9S08SH4CPJ lead time through the Request a Quote form on this page. Lead time can vary with order quantity, packaging, production scheduling, and destination, so a generic interval would not represent a firm commitment. NXP lists the lifecycle status as active, while the quote process allows manufacturing availability to be confirmed for the specific order.
Is MC9S08SH4CPJ in stock?
MC9S08SH4CPJ stock status should be confirmed through the Request a Quote form on this page for the required quantity and shipment location. The manufacturer identifies the device as active, but that lifecycle designation does not guarantee inventory for every order quantity. A quote response can confirm current allocation, standard packaging, and the expected handling schedule.

داتای سەرچاوەی ئەندازیاری بۆ MC9S08SH4CPJ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose MC9S08SH4CPJ when a compact 8-bit controller can satisfy the design with 4 KB of Flash and a 20-pin DIP assembly is preferable. Its 40 MHz HCS08 core and integrated SCI, SPI, I2C, and 12-channel ADC provide useful capability without a larger package. Select MC9S08SH8CPJ when firmware growth requires twice the Flash memory, while the same processor speed and package preserve most of the platform. MC9S08SH2CPJ is appropriate only when a 2 KB code budget is sufficient; it halves the target's memory capacity and may require restructuring the firmware. NXP states that S08SH is pin-, tool-, and software-compatible with S08SG, but an exact S08SG device should be selected only after checking its package, memory, peripheral map, and clock requirements. No cross-brand drop-in replacement is documented, so changing manufacturers is not a board-level substitution without a redesign.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MC9S08SH2CPJ MC9S08SH8CPJ
Manufacturer NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 20-DIP 20-DIP 20-DIP
CPU Architecture 8-bit HCS08 8-bit HCS08 8-bit HCS08
Maximum CPU Frequency 40 MHz 40 MHz 40 MHz
Flash Memory 4 KB 2 KB (-50%) 8 KB (+100%)
Supply Voltage 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V
ADC Resolution 10 bit 10 bit 10 bit
ADC Channel Count 12 channels 12 channels 12 channels
Serial Interfaces SCI, SPI and I2C SCI, SPI and I2C SCI, SPI and I2C

جیاکەرەوە سەرەکییەکان

  • Balanced 4 KB Flash configuration within the 20-pin S08SH family (بەراورد بەMC9S08SH8CPJ)
  • Higher memory ceiling than the 2 KB S08SH option (بەراورد بەMC9S08SH2CPJ)
  • 40 MHz processing speed is retained across the compared S08SH drop-in family (بەراورد بەMC9S08SH2CPJ)

تێبینییەکانی دیزاین

Place the MCU supply-decoupling capacitor immediately adjacent to the device power pins and follow the connection sequence shown in the NXP layout guidance. Route the 20 DIP leads to avoid long loops around analog inputs. Because the device is designed around 5 V applications, verify that every connected sensor, communication transceiver, and indicator operates correctly at the selected supply level.

Use the NXP pin-description table to assign all 20 leads before laying out the board; do not infer pin functions from another S08 package. Keep analog ADC traces away from high-current switching paths and clocks, provide a quiet ground reference for analog measurements, and place input protection close to connector entries. This separation is particularly important when the MCU is used for both sensing and switching-control functions.

Do not treat the stated 40 MHz CPU speed as permission to run the maximum clock without checking supply voltage, bus timing, and peripheral configuration. When upgrading from MC9S08SH4CPJ to an 8 KB S08SH variant, retain the 20-pin footprint but review linker placement and flash-size assumptions. When moving toward S08SG, verify the exact pinout, memory map, peripheral availability, and development-tool configuration rather than relying on family-level compatibility.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The device is listed as active, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the retrieved records.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MC9S08SH4CPJ datasheet MC9S08SH4CPJ pinout MC9S08SH4CPJ datasheet pdf MC9S08SH4CPJ equivalent MC9S08SH4CPJ replacement MC9S08SH4CPJ cross reference MC9S08SH4CPJ price MC9S08SH4CPJ stock MC9S08SH4CPJ vs MC9S08SH8CPJ NXP MC9S08SH4CPJ MC9S08SH4 20 DIP pinout MC9S08SH4 application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

NXP Semiconductors MC9S08SH4CPJ MC9S08SH2CPJ MC9S08SH8CPJ S08SH S08SG HCS08 8-bit microcontroller embedded microcontroller HC08 instruction set BGND instruction 40 MHz processor 4 KB Flash SCI SPI I2C 12-channel ADC 10-bit ADC automatic compare internal temperature sensor 5 V applications 20-DIP DIP package through-hole assembly semiconductor
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ