Microchip Technology

MCP2515-E/ML - 1 Mbps CAN 2.0B SPI Controller | Microchip

MPN: MCP2515-E/ML ✓ چالاک
5 V Vdss 20-QFN, 4 x 4 mm Package
MOQ: 1 |

MCP2515-E/ML گشتی

The Microchip Technology MCP2515-E/ML is a stand-alone Controller Area Network controller with a serial peripheral interface, a CAN 2.0B-compliant protocol engine, and a 20-QFN 4 x 4 mm package. It supports standard data frames, extended data frames, and remote frames at up to 1 Mb/s. The controller provides two receive buffers, acceptance masks, acceptance filters, and byte-level filtering for separating accepted traffic from other CAN traffic.

A CAN controller is an interface IC that converts commands and received bus data into a serial interface suitable for a host microcontroller. Within the broader hierarchy, the MCP2515-E/ML is a stand-alone CAN interface controller, an industrial communications interface IC, and a peripheral for embedded control systems. Unlike a combined controller and transceiver, it requires an external CAN transceiver to connect its logic-level CANH and CANL pins to a physical CAN bus.

The -E variant is identified in the verified data as a 5 V, lead-free 4 x 4 mm plastic QFN device with an operating temperature range of -40 C to +125 C. Its CAN implementation supports 1 Mb/s operation and handles standard, extended, and remote frames. Two receive buffers, masks, and filters support message prioritization and traffic management, while the SPI host interface allows an external microcontroller or processor to configure the controller and exchange CAN frames.

The MCP2515 family is described by Microchip as a second-generation stand-alone CAN controller. The device is compatible in function and pin arrangement with the MCP2510 while adding faster throughput, byte filtering, and support for time-triggered protocols. These features make it useful where deterministic message handling, reception filtering, and host-processor independence are important rather than using an MCU-integrated CAN peripheral.

Typical uses include industrial automation equipment, automotive body and comfort systems, building controls, robotics, medical equipment, and embedded monitoring systems. In these applications, the MCP2515-E/ML handles CAN framing and filtering while the external microcontroller manages application logic, diagnostics, and communications above the CAN bus.

Designers should verify the exact pin assignments and exposed-pad connection against the manufacturer datasheet before layout. The SPI interface, oscillator timing, interrupt signals, and standby behavior also require attention in firmware and PCB planning. This page combines verified manufacturer and distributor information with practical integration guidance, comparison criteria, and procurement-oriented details for engineers evaluating the MCP2515-E/ML.

جێگرەوەکانی جێگۆڕکێ بۆ MCP2515-E/ML — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MCP2515-E/ML (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, CAN Specification, Operating Temperature, Supported Frame Types, Maximum CAN Data Rate.

Microchip Technology
Package: 20-QFN (4 mm x 4 mm)
CAN Specification: CAN 2.0
Supported Frame Types: Standard data frames, extended data frames, and remote frames
Microchip Technology
CAN Specification: CAN 2.0B
Supported Frame Types: Standard data frames, extended data frames, and remote frames
Microchip Technology
Package: 20-VFQFN with exposed pad
CAN Specification: CAN 2.0B
Microchip Technology
Package: 20-pin QFN, 4 x 4 mm
CAN Specification: CAN 2.0B
Operating Temperature: -40°C to +85°C
Microchip Technology
CAN Specification: Version 2.0B
Operating Temperature: -40°C to +125°C
Supported Frame Types: Standard data frames, extended data frames, and remote frames

MCP2515T-E/MLVAO

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 20-QFN 4 x 4 mm
Stand-alone CAN controller · CAN 2.0B · SPI · Standard data, extended data, and remote frames · Data-byte filtering and time-triggered protocol support · Pin- and function-compatible with MCP2510 · 125 deg C · 20-VFQFN with exposed pad

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MCP2515-I/ML

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 20-QFN 4 x 4 mm
Stand-alone CAN controller · CAN Version 2.0B · 1 Mbps · SPI · Standard, extended data, and remote frames · 3.3 V and 5 V · Sleep and standby · Two acceptance masks and six acceptance filters

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MCP2515T-I/ML

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 20-QFN 4 x 4 mm
Stand-alone CAN controller · CAN 2.0B · 1 Mbps · SPI · 2.7 V to 5.5 V · -40°C to +85°C · Standard data frames, extended data frames, and remote frames · 2 buffers

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MCP2515-E/P

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 20-QFN 4 x 4 mm
Stand-alone CAN controller with SPI interface · CAN 2.0B · 1 Mb/s · Standard data frames, extended data frames, and remote frames · SPI · 5 V · -40°C to +125°C · 2 receive buffers

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MCP2515T-I/SO

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 20-QFN 4 x 4 mm
Stand-alone CAN controller · Version 2.0B · 1 Mb/s · SPI · Standard data frames, extended data frames, and remote frames · 2 · 2 acceptance masks and 6 acceptance filters · 5 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MCP2515-E/ML تایبەتمەندییەکان

Device Type Stand-alone CAN controller
CAN Protocol CAN version 2.0B
Maximum CAN Data Rate 1 Mb/s
Host Interface SPI
Supported Frame Types Standard data, extended data, and remote frames
Receive Buffer Count 2 buffers
Filtering Receive masks, acceptance filters, and byte-level filtering
ڤۆڵتیەی دابینکردن 5 V
پلەی گەرمیی کارکردن -40 C to +125 C
پاکێج 20-QFN, 4 x 4 mm
Package Height 0.90 mm
Termination / Finish Lead-free plastic
Technology CMOS
Transceiver Requirement External CAN transceiver required
MCP2510 Compatibility Pin and function compatible
Upgraded Features Faster throughput, databyte filtering, and time-triggered protocol support

ڕێنمایی ڕێکخستنی پینی MCP2515-E/ML 0.90 mm

ڕێکخستنی پین بۆ MCP2515-E/ML (پاکێجی 0.90 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 0.90 mm بۆ MCP2515-E/ML

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MCP2515-E/ML.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MCP2515-E/ML گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation and PLC Communication, Automotive Body and Comfort Modules, Robotics and Motor-Control Coordination, Building Controls and HVAC Equipment, Medical and Diagnostic Equipment, Remote Monitoring and Sensor Networks.

🏭

Industrial Automation and PLC Communication

The MCP2515-E/ML fits an industrial CAN node that must exchange process and diagnostic data with a host controller over SPI. Its CAN 2.0B protocol engine supports standard and extended data frames plus remote frames at up to 1 Mb/s, while two receive buffers, acceptance masks, and byte filtering help separate relevant traffic. A 5 V supply and -40 C to +125 C operating range align with many factory environments. The controller should be paired with an external industrial CAN transceiver, protection components, and correctly terminated bus wiring.

🚗

Automotive Body and Comfort Modules

The MCP2515-E/ML can support a body or comfort-control node that links door, lighting, climate, or seat functions to a vehicle CAN network. Handling of standard and extended frames at up to 1 Mb/s provides compatibility with common CAN traffic, and the two receive buffers plus filtering help organize messages received by the host processor. The -40 C to +125 C rating is useful in vehicle environments, but the verified data does not establish AEC-Q100 qualification for this exact suffix, so automotive qualification must be confirmed separately.

🔧

Robotics and Motor-Control Coordination

The MCP2515-E/ML is appropriate for robot controllers, sensor nodes, and actuator hubs that coordinate motion commands and status messages over a CAN network. Its SPI host interface keeps CAN frame handling separate from the real-time processor, and the 1 Mb/s capability accommodates command and diagnostic traffic when the network is designed appropriately. Acceptance filters reduce irrelevant message handling in the host software. Designers must still account for external-transceiver propagation delay, bus termination, electromagnetic compatibility, and deterministic task scheduling.

🏭

Building Controls and HVAC Equipment

The MCP2515-E/ML can serve as the CAN controller in heating, ventilation, air-conditioning, lighting-control, and building-automation equipment. It supports remote frames and extended identifiers, which are useful for equipment discovery and control hierarchies, while byte filtering helps the host MCU focus on assigned messages. The -40 C to +125 C range supports temperature variation commonly encountered around equipment rooms and control cabinets. An external transceiver with the required isolation, surge protection, and network compatibility must be selected separately.

💊

Medical and Diagnostic Equipment

The MCP2515-E/ML can provide a dedicated CAN interface in medical monitoring, laboratory, and diagnostic instruments that exchange data with a separate controller. Its stand-alone architecture allows the main processor to handle user-interface and signal-processing tasks while the CAN controller manages frame reception, filtering, and transmission. The 5 V supply matches many embedded subsystems, and the -40 C to +125 C range covers varied enclosure conditions. Safety, isolation, and medical regulatory requirements are system-level concerns and are not established by the component data.

🧩

Remote Monitoring and Sensor Networks

The MCP2515-E/ML suits distributed sensor and remote-monitoring nodes that periodically report measurements and receive configuration commands over CAN. The 1 Mb/s CAN 2.0B capability supports multiple message classes, and acceptance masks and filters allow the host firmware to reject unrelated traffic efficiently. Using a controller rather than a combined transceiver preserves the option to select the transceiver according to bus topology, isolation, and environmental requirements. Low-power designs must evaluate the controller's active and standby consumption from the manufacturer datasheet because those values were not included in the supplied verification data.

What is the MCP2515-E/ML and what does it do?
The MCP2515-E/ML is a Microchip Technology stand-alone CAN 2.0B controller that communicates with a host processor through SPI. According to the manufacturer datasheet, it can transmit and receive standard data frames, extended data frames, and remote frames at rates up to 1 Mb/s. It provides two receive buffers together with masks and filters for managing accepted CAN traffic. It does not include a physical-layer transceiver, so an external CAN transceiver is required.
What are the key specifications of MCP2515-E/ML that engineers should know?
The MCP2515-E/ML combines a 1 Mb/s CAN 2.0B controller, an SPI host interface, two receive buffers, acceptance masks, filters, and byte-level filtering in a 20-QFN 4 x 4 mm package. The verified product information identifies a 5 V supply and an operating range of -40 C to +125 C. The MCP2515 family also supports time-triggered protocols and is pin and function compatible with the MCP2510 while providing faster throughput.
Where can I download the MCP2515-E/ML datasheet PDF?
The official MCP2515 Family Data Sheet can be downloaded from Microchip Technology using the manufacturer PDF link published with the verified product data. It is the appropriate source for the complete 20-QFN pin assignment, electrical characteristics, register map, timing information, and application guidance. The document identifier appearing in the verified URL is DS20001801K. Engineers should consult that datasheet and the product page before finalizing PCB and firmware designs.
Where can I find the MCP2515-E/ML pinout?
The MCP2515-E/ML pinout is published in the official MCP2515 Family Data Sheet at the manufacturer PDF URL on this page. The verified package information identifies the device as a 20-QFN with a 4 x 4 mm body and 0.90 mm height. Exact pin names, exposed-pad requirements, and numbering are not reproduced here because the supplied verification data does not include the complete pin table. Use the manufacturer pinout and land pattern without inferring connections from another package variant.
Does the MCP2515-E/ML need an external CAN transceiver?
Yes, the MCP2515-E/ML requires an external CAN transceiver for physical bus connection. It is a stand-alone controller rather than a combined controller and transceiver, so its logic-level CAN interface must connect through a suitable CANH and CANL transceiver. The verified family description identifies CANH and CANL as bus-facing functions, while the controller handles framing, filtering, buffers, and host-interface operations. The transceiver should be selected separately for bus speed, fault tolerance, and application environment.
What is the operating voltage of MCP2515-E/ML?
The MCP2515-E/ML operates from a 5 V supply according to the verified product specifications. This value describes the controller's supply voltage rather than the voltage on the physical CAN bus, which is handled by the external transceiver. Before using the device with another supply rail, consult the official MCP2515 Family Data Sheet for all input and output voltage limits, timing margins, and decoupling requirements.
What is the operating temperature range of MCP2515-E/ML?
The MCP2515-E/ML is rated for an operating temperature range of -40 C to +125 C. That range supports use across industrial temperature environments when the complete system, external CAN transceiver, crystal or timing circuit, and board materials are also suitable. The temperature rating is extracted from the verified component listing rather than inferred from the generic MCP2515 family. It should not be treated as proof that every associated external part has the same rating.
How does the MCP2515-E/ML compare with the MCP2510?
The MCP2515-E/ML is pin and function compatible with the MCP2510 according to Microchip Technology, but the MCP2515 family adds faster throughput, databyte filtering, and support for time-triggered protocols. This compatibility supports established MCP2510 designs, although engineers should still check package, supply, timing, and exposed-pad details for the exact ordered part. The added filtering and throughput features distinguish the MCP2515 for more demanding CAN traffic.
MCP2515-E/ML vs MCP25625: which is better for a new design?
Choose the MCP2515-E/ML when the design already includes or requires a separate CAN transceiver and uses a 20-QFN controller-only architecture. The MCP25625 is a different family with an integrated CAN transceiver, so its pinout, supply design, and PCB layout are not interchangeable with this part. For a new compact design, the integrated-transceiver option may reduce component count, but it is not a drop-in replacement for the MCP2515-E/ML.
When should I choose MCP2515-E/ML over an SPI CAN controller with an integrated transceiver?
Choose the MCP2515-E/ML when separate transceiver selection, diagnostic access, or reuse of an established controller-only PCB is valuable. Its stand-alone architecture uses SPI for host communication and supports CAN 2.0B traffic up to 1 Mb/s with two receive buffers and acceptance filtering. An integrated-transceiver controller may be simpler for a new board, but it cannot replace this IC without changing the package, pin connections, supply architecture, and usually the firmware driver.
Is MCP2515-E/ML suitable for industrial automation and vehicle systems?
The MCP2515-E/ML is suitable for many industrial automation and vehicle-related CAN nodes because it provides a 1 Mb/s CAN 2.0B controller, SPI host access, receive filtering, and a -40 C to +125 C operating range. The verified information does not state AEC-Q100 qualification for this ordered variant, so automotive production use requires separate lifecycle and qualification review. The external transceiver, protection network, and regulatory requirements remain system-level responsibilities.
What can replace MCP2515-E/ML without changing the PCB?
A true drop-in replacement must use the same 20-QFN 4 x 4 mm footprint, preserve pin-to-pin connections, and remain within the verified operating limits. The supplied cross-reference results identify several same-brand MCP2515 ordering variants, including temperature and tape-and-reel options, but the web data does not establish a separately qualified cross-brand equivalent. Confirm the exact suffix, pin table, temperature grade, and qualification status before treating any alternative as a production replacement.
Is MCP2515-E/ML the same as TCAN4550-Q1?
No, the MCP2515-E/ML and TCAN4550-Q1 are not the same device and are not presented as package-identical drop-in equivalents. The verified technical discussion identifies the TCAN4550-Q1 as an SPI CAN controller with an integrated transceiver, while the MCP2515-E/ML is a stand-alone controller requiring an external transceiver. Although controller-mode operation may create a functional migration path, the package, pinout, power design, and firmware implications prevent a direct claim of drop-in compatibility.
Where to buy MCP2515-E/ML online and what is the price?
MCP2515-E/ML can be found through the linked DigiKey and Mouser product listings, while Octopart provides a multi-distributor availability and pricing reference. The supplied distributor snippets confirm the part is offered, but they do not expose numeric price breaks. Therefore, the quantity tiers on this page are left as null rather than inventing prices. Request a current quote from the distributor for the exact qty-1, 10, 100, 500, and 1000-unit quantities as of 2026-10-28.
What is the lead time and stock status for MCP2515-E/ML?
Stock and lead time must be confirmed directly with the linked distributors as of 2026-10-28. The verified DigiKey snippet states that the part can be purchased and ships today, but it does not provide a stable numeric lead time or a quantity-specific inventory count. Because the exact commercial status is time-sensitive and can vary by package suffix and order quantity, the Product offer uses BackOrder rather than claiming schema.org InStock.

داتای سەرچاوەی ئەندازیاری بۆ MCP2515-E/ML — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MCP2515-E/ML for a controller-only CAN design that already uses an external transceiver and requires a compact 20-QFN implementation, SPI host connectivity, CAN 2.0B operation up to 1 Mb/s, and receive filtering. MCP2515T-E/ML is the preferred same-family alternative when the exact ordering suffix meets the required temperature and shipment conditions. MCP2515-I/ML or MCP2515T-I/ML may be appropriate when a different temperature grade is required, but their limits must be verified against the ordering table. MCP2515-E/P and MCP2515T-I/SO are not physical footprint matches despite being in the same family. TCAN4550-Q1 is functionally relevant because it combines an SPI controller and transceiver, but it requires a different package, board, and power design rather than a drop-in substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MCP2515T-E/ML MCP2515-I/ML MCP2515T-I/ML MCP2515-E/P MCP2515T-I/SO
Package 20-QFN 4 x 4 mm 20-QFN 4 x 4 mm 20-QFN 4 x 4 mm 20-QFN 4 x 4 mm 18-pin package per verified comparison result SO package per verified comparison result
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Product Type Stand-alone CAN controller Stand-alone CAN controller Stand-alone CAN controller Stand-alone CAN controller Stand-alone CAN controller Stand-alone CAN controller
CAN Protocol CAN version 2.0B CAN version 2.0B CAN version 2.0B CAN version 2.0B CAN version 2.0B CAN version 2.0B
Maximum Data Rate 1 Mb/s 1 Mb/s 1 Mb/s 1 Mb/s 1 Mb/s 1 Mb/s
Host Interface SPI SPI SPI SPI SPI SPI
Receive Buffers 2 buffers 2 buffers 2 buffers 2 buffers 2 buffers 2 buffers

جیاکەرەوە سەرەکییەکان

  • Stand-alone CAN 2.0B controller architecture (بەراورد بەTCAN4550-Q1)
  • Up to 1 Mb/s CAN throughput (بەراورد بەMCP2510)
  • Integrated reception management (بەراورد بەMCP2510)
  • Compact 20-QFN implementation (بەراورد بەMCP2515-E/P)

تێبینییەکانی دیزاین

Lay out the MCP2515-E/ML using the exact Microchip recommended land pattern and exposed-pad connection for the 20-QFN 4 x 4 mm package. The verified snippets do not provide the complete pin table or thermal-land geometry, so do not infer them from an 18-pin or SO variant. Keep the SPI clock and data traces away from CAN transceiver edge currents, place required input and output capacitors close to their associated pins, and provide a low-impedance ground path beneath and around the controller.

Decouple the 5 V controller supply locally and follow the capacitor values and placement shown in the manufacturer datasheet. The controller is separate from the physical-layer transceiver, so its supply rails and the transceiver rails may require different filtering. Check voltage tolerance, startup behavior, and quiescent current for the exact suffix before fixing the architecture. Keep switching-regulator and motor-drive energy paths physically separated from the SPI and CANH/CANL routing.

Do not treat an MCP2515 family variant with a different package suffix as automatically interchangeable. The verified comparison data identifies MCP2515-E/P as an 18-pin part and MCP2515T-I/SO as an SO-package part, whereas MCP2515-E/ML is a 20-QFN. Verify pin numbering, exposed-pad requirements, temperature range, shipping format, and supply limits against the manufacturer ordering information before approving any substitution.

SPI timing between the host MCU and MCP2515-E/ML should be analyzed with the actual clock rate, trace length, load, and grounding arrangement. The CAN bus itself must be routed as a differential pair through the external transceiver, with appropriate termination only at the physical ends of the bus. Avoid routing CAN bus traces through switching-power or motor-node areas, and keep ground and return-current paths continuous under transient conditions.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Yes
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The verified component listing identifies MCP2515-E/ML as lead-free plastic. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statements were not supplied and therefore remain unknown. The -40 C to +125 C operating range is not, by itself, evidence of AEC-Q100 qualification.

داتا پشتڕاستکراوەتەوە لە: 2026-10-28 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MCP2515-E/ML MCP2515-E/ML datasheet PDF Microchip MCP2515-E/ML MCP2515-E/ML 1 Mbps CAN 2.0B controller MCP2515-E/ML 20-QFN pinout MCP2515-E/ML SPI CAN controller MCP2515-E/ML industrial CAN application MCP2515-E/ML automotive CAN interface MCP2515-E/ML vs MCP2510 MCP2515-E/ML vs MCP25625 MCP2515-E/ML drop-in replacement MCP2515-E/ML buy online price MCP2515-E/ML lead time and stock What can replace MCP2515-E/ML? Where to find MCP2515-E/ML pinout?

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology MCP2515-E/ML MCP2515 MCP2515T-E/ML MCP2515-I/ML MCP2515T-I/ML MCP2515-E/P MCP2515T-I/SO MCP2510 TCAN4550-Q1 Controller Area Network CAN 2.0B SPI stand-alone CAN controller CAN interface IC embedded control system industrial automation vehicle body control CANH CANL external CAN transceiver 20-QFN QFN package family surface mount SMD
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ