MCP3564R-E/ST - 24-Bit Quad-Channel Delta-Sigma ADC | Microchip
MPN: MCP3564R-E/ST ✓ چالاکMCP3564R-E/ST گشتی
A delta-sigma ADC is a data-converter IC that oversamples its input and uses digital filtering to reduce quantization noise. Within the conversion hierarchy, the MCP3564R-E/ST belongs to the ADC > delta-sigma ADC > data converter > integrated circuit family. This architecture is particularly useful when a sensor or transducer produces a relatively slow signal that must be digitized with high resolution and low noise.
The converter supports eight single-ended or four differential inputs, allowing one device to serve multichannel measurement systems. Its 24-bit resolution captures small changes in voltage, while the programmable output data rate of up to 153.6 kSPS provides flexibility between measurement speed and noise performance. The integrated voltage reference reduces the external component count and simplifies board-level design compared with an ADC that requires a separate reference circuit.
MCP3564R-E/ST is offered in a leaded 20-pin TSSOP package measuring 6.4 mm by 6.4 mm. Its specified extended-temperature operation ranges from -40 °C to +125 °C. The package format supports conventional leaded assembly and inspection while providing enough pin count for multiple analog inputs, digital data, power, clock, and configuration connections.
Typical uses include industrial process monitoring, sensor-interface measurement, environmental instrumentation, data acquisition modules, and precision control systems. The four differential inputs are useful when rejecting common-mode noise or measuring bridge-based sensors, while eight single-ended inputs suit systems with several grounded voltage sources. The programmable data rate allows the system architect to balance throughput against the converter's noise performance.
For reliable operation, follow the manufacturer datasheet when assigning analog inputs, configuring the digital filter, routing the reference and supply connections, and selecting external input and reference components. Pay particular attention to source impedance and the settling behavior of the digital sinc filter when changing data rates. The four differential inputs must also be connected according to the input-channel architecture shown in the datasheet pin description.
This product page combines manufacturer specifications, application guidance, comparison parameters, and practical design considerations for engineers evaluating the MCP3564R-E/ST. It also identifies pin-compatible options while clearly distinguishing parts that reduce channel count or omit the integrated reference, helping selection based on actual measurement requirements.
جێگرەوەکانی جێگۆڕکێ بۆ MCP3564R-E/ST — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MCP3564R-E/ST (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Operating Temperature Range, Package, Input Configuration, RoHS Status, Differential Input Channels.
MCP3564-E/ST
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MCP3561R-E/ST
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MCP3562R-E/ST
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MCP3564R-E/ST زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| ADC Type | 24-bit delta-sigma ADC |
| Input Configuration | 8 single-ended or 4 differential inputs |
| Maximum Data Rate | 153.6 kSPS |
| Programmable Data Rate | Up to 153.6 kSPS |
| Internal Voltage Reference | Integrated |
| ڤۆڵتیەی دابینکردن | 3 V |
| وردی | 24 bit |
| مەودای پلەی گەرمیی کارکردن | -40 °C to +125 °C |
| Package Type | TSSOP-20 |
| Lead Count | 20 leads |
| Package Dimensions | 6.4 mm x 6.4 mm |
| جۆری دامەزراندن | Surface mount |
| Packing Media | Tube |
| Tube Quantity | 74 units |
| دۆخی RoHS | unknown |
| REACH Status | unknown |
ڕێنمایی ڕێکخستنی پینی MCP3564R-E/ST 6.4 mm x 6.4 mm
ڕێکخستنی پین بۆ MCP3564R-E/ST (پاکێجی 6.4 mm x 6.4 mm). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MCP3564R-E/ST.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MCP3564R-E/ST گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Bridge Sensor Acquisition, Environmental Data Logging, Precision Data Acquisition, Precision Control Systems, Instrumentation and Test Equipment.
Industrial Process Measurement
The MCP3564R-E/ST fits industrial process monitoring where several slowly changing signals must be measured against a common reference. Its four differential input pairs can monitor thermocouple, bridge, or conditioned transmitter outputs while rejecting common-mode voltage present on long field-wired cables. The 24-bit conversion resolution preserves small process variations, and the programmable rate of up to 153.6 kSPS allows slower filtering for stable readings or faster acquisition for dynamic events. The integrated reference reduces board complexity, although accuracy still depends on reference performance, input protection, grounding, and calibration.
پێشنیارکراو
Bridge Sensor Acquisition
The MCP3564R-E/ST is well suited to multiple bridge-based sensors because four differential input channels can measure small voltage differences produced by strain, pressure, and load cells. Differential acquisition is valuable when sensor leads share ground offsets or pick up common-mode noise, provided the inputs remain within the converter's electrical limits. The 24-bit resolution supports fine measurement resolution, while the adjustable data rate lets the designer select a filter profile appropriate for the mechanical bandwidth. Front-end instrumentation amplifiers, input dividers, and surge protection may still be needed depending on excitation and installation conditions.
پێشنیارکراو
Environmental Data Logging
The MCP3564R-E/ST can support compact environmental acquisition systems that combine temperature, humidity, light, pressure, or gas-sensor outputs. Eight single-ended inputs allow several analog sensors to share one converter, reducing component count and simplifying synchronization. A lower programmed data rate can improve noise averaging when environmental variables change slowly, while the 24-bit format retains fine changes in sensor voltage. Because sensors may have wide supply ranges or nonlinear outputs, each channel normally needs suitable buffering, scaling, filtering, and protection before reaching the converter inputs.
پێشنیارکراو
Precision Data Acquisition
The MCP3564R-E/ST is appropriate for precision data-acquisition modules that record low-level analog measurements without the complexity of a high-speed ADC clocking system. Its delta-sigma conversion approach and programmable filtering suit continuous monitoring of slow or narrow-band signals, and the integrated reference simplifies a compact analog front end. Four differential inputs can be used for active transducer outputs, while eight single-ended inputs handle multiplexed or grounded sources. The 20-lead TSSOP package is practical for conventional PCB assembly, but analog routing must remain short and shielded from digital switching activity.
پێشنیارکراو
Precision Control Systems
The MCP3564R-E/ST can serve as the measurement front end in industrial control systems that monitor temperature, position, pressure, or process feedback. The four differential channels support several feedback signals, while the programmable data rate allows control-loop bandwidth and measurement noise to be balanced. The 24-bit resolution can reveal small errors before they materially affect system performance, and the integrated voltage reference helps stabilize the measurement chain. The control processor must select an appropriate filter settling time and account for the delay introduced by digital filtering when determining loop response.
پێشنیارکراو
Instrumentation and Test Equipment
The MCP3564R-E/ST is suitable for compact instrumentation that measures low-level voltages with high resolution and limited board space. Multiple inputs permit sharing the converter among several test points, and differential operation improves robustness when the source includes a significant common-mode voltage. The integrated reference reduces calibration complexity compared with an external-reference configuration, although reference accuracy ultimately contributes to gain and offset error. Designers should follow the manufacturer datasheet for input impedance, digital-filter response, calibration methods, and the required relationship between output rate and measurement settling time.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MCP3564R-E/ST — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MCP3564-E/ST | MCP3561R-E/ST | MCP3562R-E/ST |
|---|---|---|---|---|
| Package | TSSOP-20 | TSSOP-20 | TSSOP-20 | TSSOP-20 |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Differential Input Channels | 4 channels | 4 channels | 1 channel | 2 channels |
| Single-Ended Input Channels | 8 channels | 8 channels | 2 channels | 4 channels |
| Integrated Voltage Reference | Yes | No | Yes | Yes |
| Converter Architecture | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC |
جیاکەرەوە سەرەکییەکان
- Higher channel count than the reduced-channel family alternatives (بەراورد بەMCP3561R-E/ST)
- More measurement channels than the two-channel family member (بەراورد بەMCP3562R-E/ST)
- Integrated reference simplifies new designs (بەراورد بەMCP3564-E/ST)
تێبینییەکانی دیزاین
Route analog inputs as short traces directly from their sources to the assigned converter pins, with a continuous ground plane beneath the analog section. Keep digital clock and serial-data traces away from the input and reference nodes, and place analog bypass capacitors close to their power pins. The MCP3564R-E/ST uses differential or single-ended input channels, so analog routing should preserve symmetry between paired differential inputs to avoid converting common-mode voltage into differential error.
Select the programmable output data rate together with the digital-filter configuration rather than evaluating conversion rate alone. A lower rate increases averaging and can improve rejection of noise outside the signal bandwidth, while a higher rate returns results sooner but may reduce available resolution. Confirm the settling interval for the selected filter in the manufacturer datasheet and avoid changing rates faster than the acquisition system can discard old results.
Do not substitute MCP3564 for MCP3564R without reviewing the reference implementation. Microchip identifies MCP3564R as the preferred pin-compatible option, while the original MCP3564 does not contain the onboard reference. Also avoid treating the UQFN-20 MCP3564R package as interchangeable with the leaded TSSOP-20 MCP3564R-E/ST because their land patterns, dimensions, and assembly requirements differ.
زانیاری پابەندبوون
The manufacturer information used for this product does not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Use the Microchip product page and current material declaration for formal compliance determination.