Renesas Electronics

MK2049-45SILF - 51.84MHz Dual PLL Clock Synthesizer | Renesas

MPN: MK2049-45SILF ✓ چالاک
3.15 V to 3.45 V Vdss 20-SOIC, 0.295 in (7.50 mm) width Package 51.84 MHz Speed
MOQ: 1 |

MK2049-45SILF گشتی

Renesas Electronics MK2049-45SILF is a dual phase-locked-loop clock synthesizer with frequency synthesis and jitter attenuation, operating from a 3.3 V communications-clock supply and housed in a 20-pin SOIC package. The device is identified as a PLL clock synthesizer with a 51.84 MHz output frequency, while its reference circuitry accepts an 8 kHz clock input. Its first PLL uses a VCXO architecture with a pullable crystal to track signal wander and attenuate input jitter, providing a clocking solution for communications equipment requiring multiple synchronized outputs.

A PLL clock synthesizer is a clock-and-timing integrated circuit that multiplies, divides, or filters a reference frequency to create stable system clocks. Its hierarchy runs from clock generator to frequency synthesizer, then to PLL-based clock and timing IC. The MK2049-45SILF uses phase locking to relate its synthesized outputs to an external reference, allowing the downstream circuitry to obtain predictable frequencies while reducing phase noise and timing wander.

The principal benefits of this device are its dual-PLL organization, VCXO-based reference tracking, jitter attenuation, and support for communications-clock generation. The 51.84 MHz designation makes it relevant to legacy telecommunications, line-card, network-interface, and embedded synchronous systems. Using a single PLL-based clock synthesizer can reduce the number of separate oscillators and dividers required when several related clocks must remain phase-coherent.

Its first PLL accepts a reference signal and tracks wander with a pullable crystal, while the second PLL provides frequency synthesis and additional jitter attenuation. This architecture is useful when the source reference includes timing noise or long-term drift and the system requires locally generated clocks with improved stability. The SOIC-20 package also offers a conventional surface-mount footprint compatible with established communications and industrial PCB layouts.

Typical implementations include telecommunications line equipment, T1/E1 and related legacy transport systems, network-interface clock recovery, digital signal-processing modules, and embedded control systems requiring 51.84 MHz timing. In these applications, the PLL can derive operating clocks from a shared reference and distribute coherent timing among multiple functional blocks.

Designers should follow the Renesas MK2049-45 datasheet for the reference-crystal selection, loop-filter configuration, output-routing options, decoupling requirements, and recommended component values. The reference path and crystal network are critical to jitter performance, so traces should be short, return paths continuous, and supply bypassing placed close to the device pins.

This product page combines the manufacturer function description with distributor package and frequency data, practical PLL-design guidance, and confirmed cross-reference information. It is intended to help engineers determine whether the MK2049-45SILF fits a clocking requirement before completing reference, layout, qualification, and sourcing validation.

جێگرەوەکانی جێگۆڕکێ بۆ MK2049-45SILF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MK2049-45SILF (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type, Package, Supply Voltage, First PLL Architecture.

Renesas Electronics
Device Type: PLL Clock Synthesizer
Package: 20-pin SOIC
Supply Voltage: 3.3 V
بەراوردکردن لەگەڵ MK2049-45SILF →
Renesas Electronics
Device Type: Dual PLL clock synthesizer and jitter-attenuation device
Package: 20-pin SOIC, 7.50 mm width
Supply Voltage: 3.3 V
بەراوردکردن لەگەڵ MK2049-45SILF →
Renesas Electronics
Device Type: Dual PLL clock synthesizer and jitter-attenuation device
Package: 20-pin SOIC, 7.50 mm width
Supply Voltage: 3.3 V
بەراوردکردن لەگەڵ MK2049-45SILF →

MK2049-45ASI

✅ جێگرەوەی ڕاستەوخۆ
Renesas Electronics
📦 20-SOIC
PLL Clock Synthesizer · Dual Phase-Locked Loop · Yes · Clock · Clock · 51.84 MHz · 1 · 1:3

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MK2049-45SI

✅ جێگرەوەی ڕاستەوخۆ
Renesas Electronics
📦 20-SOIC
Dual PLL clock synthesizer and jitter-attenuation device · 3.3 V · 51.84 MHz · 8 kHz · 125 MHz · 1:3 · Dual PLL · VCXO-based with pullable crystal

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MK2049-45SILFTR

✅ جێگرەوەی ڕاستەوخۆ
📦 20-SOIC
Same 20-SOIC terminals and listed electrical characteristics; the alternate ordering suffix changes packing attributes, with a 0% listed key-rating difference.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MK2049-45SITR

✅ جێگرەوەی ڕاستەوخۆ
Renesas Electronics
📦 20-SOIC
Dual PLL clock synthesizer and jitter-attenuation device · 3.3 V · 51.84 MHz · 8 kHz · 125 MHz · 1:3 · Dual PLL · VCXO-based with pullable crystal

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MK2049-45ASILFTR

✅ جێگرەوەی ڕاستەوخۆ
📦 20-SOIC
Same 20-SOIC terminals and listed electrical characteristics; the alternate ordering suffix changes packing attributes, with a 0% listed key-rating difference.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MK2049-45SILF تایبەتمەندییەکان

Device Type PLL clock synthesizer IC
PLL Architecture Dual PLL
Output Frequency 51.84 MHz
Reference Input Frequency 8 kHz
ڤۆڵتیەی دابینکردن 3.15 V to 3.45 V
Primary Supply Nominal 3.3 V
First PLL Architecture VCXO based
Frequency Synthesis Supported
Jitter Attenuation Supported
پلەی گەرمیی کارکردن -40 C to +85 C
پاکێج 20-SOIC, 0.295 in (7.50 mm) width
جۆری دامەزراندن Surface Mount
Shipping Package Tube
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown
Lead-Free Status unknown
Halogen-Free Status unknown
Crystal Type Pullable crystal

ڕێنمایی ڕێکخستنی پینی MK2049-45SILF tube

ڕێکخستنی پین بۆ MK2049-45SILF (پاکێجی tube). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی tube بۆ MK2049-45SILF

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MK2049-45SILF.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MK2049-45SILF گونجاوە بۆ 6 بەکارھێنانs: Telecommunications Line Equipment, Network Interface Clocking, Digital Signal Processing Modules, Legacy T1/E1 Timing Systems, Industrial Synchronous Control, Test and Measurement Instrumentation.

🌐

Telecommunications Line Equipment

The MK2049-45SILF fits legacy telecommunications systems that require coherent clock generation at 51.84 MHz from an 8 kHz reference. Its dual-PLL architecture separates VCXO-based wander tracking from frequency synthesis and jitter attenuation, helping generate stable timing for line-card signal processing. A design can place the device near the system reference and distribution network, then use its synthesized outputs to support protocol processing and data-conversion circuits. The 3.15 V to 3.45 V operating range aligns with 3.3 V communications equipment, while the 20-SOIC package simplifies integration into established surface-mount designs. Loop bandwidth and crystal selection remain critical to final jitter performance.

🌐

Network Interface Clocking

The MK2049-45SILF can supply derived clock signals for network-interface and data-conversion modules requiring stable, phase-coherent timing. Its 51.84 MHz output capability is directly relevant to synchronous communications logic, while the 8 kHz reference input allows the PLL to track wander and suppress input jitter. Placing the PLL close to the active devices helps limit trace-level disturbance, and decoupling capacitors should be positioned at the supply pins. Engineers must configure the loop filters and crystal network according to the Renesas reference design and then verify phase-noise, acquisition behavior, and clock-output integrity under operating load.

🖥️

Digital Signal Processing Modules

The MK2049-45SILF is appropriate for digital signal-processing modules that need a low-jitter clock derived from a shared reference. Its dual PLL arrangement provides a VCXO-based tracking stage followed by a synthesis and jitter-attenuation stage, making it useful when multiple DSP or conversion blocks must operate coherently. The device can distribute 51.84 MHz-related timing locally instead of allowing each subsystem to use an independent oscillator. Layout should preserve a continuous ground plane, minimize clock-loop area, and isolate sensitive analog sections where applicable. Final suitability depends on the DSP clock-input tolerance and the module’s measured jitter requirement.

🌐

Legacy T1/E1 Timing Systems

The MK2049-45SILF is suited to legacy T1/E1-related timing architectures where a communications clock PLL must track an external reference and attenuate wander. Its reference input is specified at 8 kHz, and the device is associated with communications-clock synthesis and jitter filtering. The resulting clock can support line termination, framing, and multiplexing functions that require stable synchronization. Designers should account for the reference quality, permissible pull range of the selected crystal, and startup time of the PLL loops. The 20-SOIC package allows placement close to sensitive clock-consuming circuits without requiring a large discrete oscillator assembly.

🏭

Industrial Synchronous Control

The MK2049-45SILF can be used in industrial control equipment requiring a disciplined clock derived from a system reference. Its dual PLL design supports frequency synthesis and jitter attenuation, while the 3.3 V communications-clock supply range is compatible with compact embedded platforms. The SOIC-20 package is practical for industrial controller boards that already use surface-mount logic. To achieve repeatable performance, provide a clean reference path, follow the recommended crystal and loop-filter values, and maintain low-impedance supply and ground connections. Production validation should include frequency accuracy, phase-noise measurements, and behavior across temperature and supply tolerance.

🖥️

Test and Measurement Instrumentation

The MK2049-45SILF is useful in test and measurement modules that need a coherent clock tied to a stable external reference. The VCXO-based first PLL can track reference wander, while the second PLL provides synthesis and jitter attenuation for downstream acquisition or conversion circuits. At 51.84 MHz, it can support clocking for suitable legacy instrumentation and communication analyzers. Use short reference paths, carefully isolate the crystal loop, and verify output jitter with the final clock distribution network because PCB parasitics and connector transitions can affect measurements. The 3.3 V supply and 20-SOIC footprint make integration straightforward where these legacy timing requirements remain in use.

کورتەی بەرهەمە پێشنیارکراوەکان

MK2049-45SILF Renesas Electronics بەکارهێنراوە لە: Telecommunications Line Equipment, Network Interface Clocking, Digital Signal Processing Modules, Legacy T1/E1 Timing Systems, Industrial Synchronous Control, Test and Measurement Instrumentation MK2049-45 Associated dual-PLL device family بەکارهێنراوە لە: Telecommunications Line Equipment, Network Interface Clocking, Digital Signal Processing Modules, Legacy T1/E1 Timing Systems, Industrial Synchronous Control, Test and Measurement Instrumentation
What are the key specifications of MK2049-45SILF that engineers should know?
The MK2049-45SILF is a dual-PLL clock synthesizer rated for a 51.84 MHz output frequency, with an 8 kHz reference input and a 3.15 V to 3.45 V supply range. It uses a VCXO-based first PLL with a pullable crystal, while the second PLL supports frequency synthesis and jitter attenuation. The device is packaged in a 20-pin SOIC measuring 7.50 mm in width. According to the Renesas MK2049-45 datasheet, the device is intended for clock synthesis, wander tracking, and jitter-attenuation applications.
What is the operating voltage of MK2049-45SILF?
The MK2049-45SILF operates from a 3.15 V to 3.45 V communications-clock supply, with 3.3 V as the nominal rail. The Renesas MK2049-45 datasheet identifies the device as a 3.3 V communications clock PLL. A separate listing that states 4.75 V to 5.25 V conflicts with the manufacturer classification and is not used as the operating range. Designs should nevertheless verify supply tolerances and bypass requirements against the current manufacturer datasheet before release.
What clock frequencies does MK2049-45SILF generate?
The MK2049-45SILF is identified as a PLL clock synthesizer with a 51.84 MHz output and an 8 kHz reference input. The manufacturer describes the device as a dual-PLL solution combining frequency synthesis with jitter attenuation. Its first PLL is VCXO based and uses a pullable crystal to track signal wander, while the second PLL performs additional synthesis and filtering. The 12.96 MHz figure appearing in a secondary listing is not treated as the primary output because the distributor product record explicitly identifies 51.84 MHz.
Where can I download the MK2049-45SILF datasheet PDF?
The official MK2049-45 datasheet is available from Renesas Electronics through the manufacturer document page and should be the primary reference for design work. It describes the dual-PLL architecture, VCXO reference tracking, jitter attenuation, frequency synthesis, and recommended operating conditions. Use the manufacturer PDF rather than relying on distributor summaries when selecting the pullable crystal, configuring loop filters, assigning output frequencies, or determining PCB land patterns. The visible Download link on this page can also be used to request current documentation and commercial support.
Where can I find the MK2049-45SILF pinout?
The MK2049-45SILF uses a 20-pin SOIC package, and its authoritative pin descriptions and numbering are shown in the Renesas MK2049-45 datasheet. Use the pin-description table and land-pattern diagram to assign the reference input, crystal-network connections, supply pins, ground pins, and synthesized clock outputs. A complete pin-by-pin diagram is not presented on this page, so do not infer unused connections from a generic SOIC-20 footprint. Request the current manufacturer documentation before finalizing routing or assigning test points.
What can replace MK2049-45SILF?
Confirmed same-package replacements include MK2049-45ASI, MK2049-45SI, MK2049-45SILFTR, MK2049-45SITR, and MK2049-45ASILFTR, each identified by cross-reference records as having consistent terminals and packages. They use the same 20-SOIC footprint and communications-clock PLL classification. Because suffix codes can indicate ordering, packaging, or temperature distinctions, engineers should verify the relevant code against the Renesas ordering table before production. Use the Request a Quote form on this page when confirming availability for the exact replacement suffix.
Is MK2049-45SILF the same as MK2049-45ASI?
MK2049-45SILF and MK2049-45ASI are identified as completely replaceable in cross-reference data, with matching terminals, package, and principal performance characteristics. Both are classified as 20-SOIC, 3.3 V communications-clock PLL devices. The ordering suffix should still be checked because it may encode temperature grade, packing method, or another ordering attribute. For a new or replacement PCB, confirm the exact suffix and operating-temperature requirement rather than treating every “SILF” and “ASI” code as interchangeable without review.
MK2049-45SILF vs MK2049-45SI - which is better for a communications board?
MK2049-45SILF and MK2049-45SI are both listed as pin- and package-compatible 20-SOIC communications-clock PLLs, so the functional comparison is close. The practical choice depends on the required ordering suffix, packing method, temperature grade, and lifecycle conditions rather than the core PLL function. For an existing MK2049-45SILF design, retaining the original suffix minimizes procurement risk. For a new design, compare the current Renesas ordering information and qualification requirements before selecting the final manufacturer part number.
When should I choose MK2049-45SILF over MK2049-45SILFTR?
Choose MK2049-45SILF when its specified tube packing and ordering attributes match the intended production plan. Choose MK2049-45SILFTR when the assembly process requires the corresponding tape-and-reel ordering option and the suffix confirms the same electrical and pin configuration. The cross-reference record identifies both as compatible 20-SOIC parts, but packing code alone does not determine every commercial term. Confirm quantity, mounting method, and current availability through the Request a Quote form on this page.
Is MK2049-45SILF suitable for jitter-sensitive communications equipment?
The MK2049-45SILF is suitable when the design requires a PLL-based communications clock with frequency synthesis and jitter attenuation. Its VCXO-based first PLL uses a pullable crystal to track input wander, while the second PLL provides additional synthesis and filtering. Suitability ultimately depends on the required output frequencies, reference quality, loop settings, and system jitter budget. The Renesas MK2049-45 datasheet should guide crystal selection and loop-filter design, followed by board-level jitter and phase-noise measurements.
Where to buy MK2049-45SILF online?
The MK2049-45SILF can be requested through the Request a Quote form on this page, where the exact suffix, quantity, packing method, and delivery requirements can be reviewed. The part is listed as an active Renesas Electronics clock synthesizer in a 20-SOIC package, with tube packing indicated by a product listing. Request the current lead time and minimum order quantity with the quotation rather than relying on historical availability information. Confirm the manufacturer part number on the quote before releasing an order.
What is the price of MK2049-45SILF?
Current commercial pricing for the MK2049-45SILF should be obtained through the Request a Quote form on this page. The form allows the required quantity, 20-SOIC packaging preference, and any schedule or shipping requirements to be stated. No fixed price is printed in this product data because commercial terms can change with quantity and market conditions. The quotation should identify MK2049-45SILF explicitly and confirm whether the supplied packing method is acceptable for the receiving and assembly process.
What is the lead time for MK2049-45SILF?
The current lead time for MK2049-45SILF should be requested through the Request a Quote form on this page. Include the required order quantity and the desired tube packaging because these details can affect allocation and scheduling. The part is shown in current product listings, but listing presence does not establish a fixed factory lead time. A quotation provides the appropriate channel for confirming available inventory, manufacturing schedule, minimum order quantity, and shipment timing for the exact suffix.
Is MK2049-45SILF in stock?
Current stock for MK2049-45SILF should be confirmed through the Request a Quote form on this page. The exact suffix, quantity, and tube-packing requirement should be included in the request so the response reflects the relevant configuration. Product listings indicate market availability for the 20-SOIC device, but they do not guarantee a requested quantity or delivery date. Use the quotation response to confirm stock, lead time, and order acknowledgment for production planning.
How does MK2049-45SILF support jitter attenuation?
The MK2049-45SILF uses two coordinated phase-locked loops for clock generation. The first is VCXO based and uses a pullable crystal to track signal wander, allowing the oscillator to follow variations in the reference source. The second PLL provides frequency synthesis and further jitter attenuation. This arrangement is useful in communications systems where multiple clock domains require coherent frequencies and reduced timing noise. Actual performance depends on reference quality, crystal selection, loop bandwidth, and PCB implementation described in the manufacturer datasheet.

داتای سەرچاوەی ئەندازیاری بۆ MK2049-45SILF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MK2049-45SILF for a 3.3 V communications system that requires a 51.84 MHz PLL-derived clock, an 8 kHz reference, VCXO wander tracking, and jitter attenuation in a 20-SOIC footprint. It is particularly appropriate for legacy line equipment, network-interface timing, and synchronous processing systems that need coherent clocks derived from a shared source. The alternatives use the same 20-SOIC interface and principal PLL functions, so selection should focus on the exact ordering suffix, packing method, temperature qualification, and current commercial status rather than basic functionality. Retain MK2049-45SILF when the original design and assembly plan specify tube packing. Select an alternate ordering code when its documented suffix provides a required production or sourcing attribute, after checking the Renesas ordering information. None of the listed alternatives should be chosen solely from the abbreviated suffix; verify the complete ordering table and perform final timing, temperature, and qualification validation.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MK2049-45ASI MK2049-45SI MK2049-45SILFTR MK2049-45SITR MK2049-45ASILFTR
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 20-SOIC, 7.50 mm width 20-SOIC - same 20-SOIC - same 20-SOIC - same 20-SOIC - same 20-SOIC - same
Device Type PLL clock synthesizer IC Communications clock PLL Communications clock PLL Communications clock PLL Communications clock PLL Communications clock PLL
PLL Architecture Dual PLL Dual PLL Dual PLL Dual PLL Dual PLL Dual PLL
Jitter Attenuation Supported Supported Supported Supported Supported Supported

جیاکەرەوە سەرەکییەکان

  • Combines VCXO wander tracking with a second synthesis and jitter-attenuation PLL (بەراورد بەMK2049-45ASI)
  • Provides a communications-focused 51.84 MHz output (بەراورد بەMK2049-45SI)
  • Offers tube packing for production assembly (بەراورد بەMK2049-45SILFTR)

تێبینییەکانی دیزاین

Keep the reference input, pullable-crystal network, and PLL loop components close to the MK2049-45SILF. Maintain a continuous ground reference beneath the clock section and avoid routing sensitive reference nodes beneath digital switching traces. The first PLL is VCXO based, so parasitic capacitance, trace leakage, and ground bounce can affect wander tracking and loop stability. Follow the manufacturer’s recommended land pattern and component-placement diagram when laying out the 20-SOIC device.

Decouple each supply connection directly to the device using the capacitance and placement specified in the Renesas MK2049-45 datasheet. The device operates in the 3.3 V communications-clock range, so verify that system startup, load transients, and tolerance remain within the 3.15 V to 3.45 V limits. Keep clock-supply return current within the quiet logic area and separate the reference network from noisy switching nodes. Validate acquisition and stable locking at minimum and maximum supply conditions.

Route synthesized clock outputs as short, controlled-impedance traces and avoid unnecessary stubs or test-point discontinuities. Use a defined ground-return path beneath each clock trace and observe the maximum load and edge-rate limits from the manufacturer datasheet. The PLL can attenuate reference jitter, but poor PCB routing can reintroduce noise into the synthesized outputs. Measure clock frequency, phase noise, and jitter at the receiver pins rather than only at the generator.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No definitive compliance declarations were identified for the exact suffix. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification status with Renesas using the manufacturer ordering or quality documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MK2049-45SILF datasheet MK2049-45SILF pinout MK2049-45SILF datasheet pdf Renesas MK2049-45SILF MK2049-45SILF 51.84MHz MK2049-45SILF 20-SOIC MK2049-45SILF PLL synthesizer MK2049-45SILF communications clock MK2049-45SILF equivalent MK2049-45SILF replacement MK2049-45SILF vs MK2049-45SI MK2049-45SILF price MK2049-45SILF stock What is MK2049-45SILF MK2049-45SILF footprint

پێکهاتە و زاراوە پەیوەندیدارەکان

Renesas Electronics MK2049-45SILF MK2049-45 MK2049-45ASI MK2049-45SI MK2049-45SILFTR MK2049-45SITR MK2049-45ASILFTR PLL clock synthesizer dual PLL VCXO frequency synthesis jitter attenuation pullable crystal communications clock 51.84 MHz 8 kHz reference 3.3 V supply 20-SOIC SOIC family surface-mount package clock and timing IC wander tracking phase-locked loop
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ