Renesas Electronics

MK2703BSILF - 27MHz PLL Audio Clock Synthesizer IC | Renesas

MPN: MK2703BSILF ✗ کۆتایی ژیان
8-SOIC (PDSO8), 0.154 in / 3.90 mm width Package 27 MHz Speed
MOQ: 1 |

MK2703BSILF گشتی

The Renesas Electronics MK2703BSILF is a PLL audio clock synthesizer integrated circuit that delivers a CMOS clock output up to 27 MHz from a crystal or external clock reference, in an 8-pin SOIC (PDSO8, 0.154 in / 3.90 mm wide) surface-mount package. The device contains an internal phase-locked loop with no bypass path and no divider or multiplier stage, and it ships in tube packaging as a RoHS-compliant, surface-mount clock and timing IC.

A PLL clock synthesizer is a clock and timing integrated circuit that locks an internal voltage-controlled oscillator to a stable external reference, normally a crystal resonator, and multiplies that reference into a higher, jitter-cleaned frequency. In the device hierarchy it sits above a plain crystal oscillator and above a divider-only clock buffer, but below a general-purpose fractional-N PLL clock generator with programmable multipliers and dividers. That middle position is exactly why the MK2703BSILF suits audio subsystems: it delivers a multiplied, low-jitter clock without the programming overhead of a fractional-N device.

Key specifications of the MK2703BSILF include a 27 MHz maximum output frequency, CMOS output type, an input that accepts either a crystal or a clock, an internal PLL, and a package body of only 8 pins. Because the loop offers no bypass option and no user-selectable divider or multiplier, the design is fixed-function, which reduces external component count and removes firmware or register configuration from the clocking path. The part is RoHS compliant and supplied in tube packing for prototype and low-volume assembly.

Architecturally, the MK2703BSILF belongs to the legacy IDT/Renesas PLL audio clock synthesizer family documented under the MK2703B datasheet. The PLL multiplies a high-stability reference, and the multiplied clock is presented on CMOS-compatible output drivers intended for driving audio codec and DAC clock inputs directly. Because the loop uses a fixed multiplication ratio, phase noise and jitter are characterised for a single operating point rather than a programmable set, so supply decoupling and reference layout quality dominate achievable jitter in a finished design.

Typical uses include audio codec master-clock generation, digital-to-analog converter clocking in CD and DVD receivers, consumer audio hubs, and multimedia processor subsystems that need a multiplied CMOS clock from a single crystal source. The 8-pin SOIC footprint is also convenient for legacy audio board revisions where a small, low-cost, fixed-function clock generator is preferred over a configurable jitter cleaner with serial programming.

When designing around this part, plan the reference network carefully: keep the crystal or oscillator close to the input pins, provide solid ground-plane return for output return paths, and bypass the supply pins locally with ceramic capacitance. Because this is an obsolete, fixed-function device, verify pin compatibility and supply sequencing against any replacement before committing to a new design revision.

This page consolidates manufacturer datasheet details, distributor availability, drop-in replacement candidates and practical design guidance for the MK2703BSILF in one place, saving the cross-checking normally spread across datasheet, lifecycle and cross-reference lookups.

جێگرەوەکانی جێگۆڕکێ بۆ MK2703BSILF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MK2703BSILF (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Device Type, Manufacturer, RoHS Status, Order Code.

Renesas Electronics
RoHS Status: Compliant
بەراوردکردن لەگەڵ MK2703BSILF →
Renesas Electronics
RoHS Status: Compliant
بەراوردکردن لەگەڵ MK2703BSILF →
Renesas Electronics
Package: 8-SOIC, 0.154 inch body width, 3.90 mm width
Manufacturer: Renesas Electronics Corporation
بەراوردکردن لەگەڵ MK2703BSILF →
Renesas Electronics
Package: 8-pin SOIC, 3.90 mm width
Device Type: PLL audio clock synthesizer
Manufacturer: Renesas Electronics
بەراوردکردن لەگەڵ MK2703BSILF →
Renesas Electronics
Package: 8-pin SOIC, 3.90 mm width
Device Type: PLL audio clock synthesizer
Manufacturer: Renesas Electronics
بەراوردکردن لەگەڵ MK2703BSILF →

MK2703SILF

✅ جێگرەوەی ڕاستەوخۆ
Renesas Electronics
📦 8-SOIC (PDSO8)
PLL audio clock synthesizer · Renesas Electronics · 27 MHz · 3.13 V to 5.5 V · 2 outputs: buffered reference clock and selectable audio clock · Analog phase-locked loop · 8-pin SOIC, 3.90 mm width · Surface mount

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MK2703S

✅ جێگرەوەی ڕاستەوخۆ
Renesas Electronics
📦 8-SOIC (PDSO8)
PLL clock synthesizer IC · 27 MHz · 3.13 V to 5.5 V · 1 · PLL clock synthesizer · PLL

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MK2703BSLF

✅ جێگرەوەی ڕاستەوخۆ
Renesas Electronics
📦 8-SOIC (PDSO8)
PLL clock synthesizer IC · 27 MHz · 3.13 V to 5.5 V · CMOS · 8-pin SOIC, 0.150 inch, 3.90 mm width · Surface mount · Analog phase-locked loop · 27 MHz crystal or clock input

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MK2705SLFTR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Renesas Electronics
📦 8-SOIC (PDSO8)
Audio clock source IC · PLL-based synchronous audio clock generator · 24.576 MHz · 1 output · 27 MHz crystal · Yes · 8-SOIC · Surface mount

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MK2702BSILF

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 8-SOIC (PDSO8)
Same Renesas/IDT PLL audio clock family and 8-SOIC PDSO8 footprint; multiplication ratio and maximum output frequency differ from the 27 MHz MK2703BSILF

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MK2703BSILF تایبەتمەندییەکان

Device Type PLL Clock Synthesizer IC
Description PLL Audio Clock Synthesizer
Maximum Output Frequency 27 MHz
جۆری دەرچوون CMOS
Input Type Clock, Crystal
PLL Yes
With Bypass No
Divider / Multiplier No / No
پاکێج 8-SOIC (PDSO8), 0.154 in / 3.90 mm width
شێوازی دامەزراندن Surface Mount (SMD)
ژمارەی پینەکان 8
دۆخی RoHS RoHS Compliant
دۆخی چرخەی ژیان Obsolete
Shipping Package Tube
Supplier Category Clock Generators, PLLs, Frequency Synthesizers

ڕێنمایی ڕێکخستنی پینی MK2703BSILF tube

ڕێکخستنی پین بۆ MK2703BSILF (پاکێجی tube). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی tube بۆ MK2703BSILF

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MK2703BSILF.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MK2703BSILF گونجاوە بۆ 6 بەکارھێنانs: Audio Codec Master Clock Generation, CD and DVD Player Digital Audio Clocking, Consumer Audio Hub and Multichannel Amplifier Systems, Industrial Audio and Intercom Control Panels, Networked Media Player and Streaming Client, Legacy Board Revision and Sustaining Designs.

🎧

Audio Codec Master Clock Generation

The MK2703BSILF fits audio codec clocking because it multiplies a stable crystal reference and presents a CMOS clock of up to 27 MHz directly on the codec master-clock input, removing the need for a separate oscillator and buffer. The fixed-function internal PLL means no register writes and no microcontroller boot sequence are required to bring the clock up, which simplifies both the firmware and the board layout. Keep the crystal close to the input pins and place a local ceramic bypass capacitor on the supply pin, since reference and supply noise map straight into the multiplied output clock. The 8-pin SOIC (PDSO8) footprint also fits easily alongside the codec in a compact consumer audio board.

📀

CD and DVD Player Digital Audio Clocking

In CD and DVD player designs the digital audio path is timing-critical, and the MK2703BSILF provides the multiplied CMOS clock the decoder and DAC chain expects. At up to 27 MHz maximum output frequency the device comfortably covers the sampling-rate-derived clocks required by classic audio decoders, while the absence of a bypass mode and of user-programmable dividers keeps the signal path deterministic. Because the loop ratio is fixed, layout discipline around the crystal oscillator network matters more than software configuration, and designers should verify the reference frequency against the datasheet before committing the bill of materials.

🔊

Consumer Audio Hub and Multichannel Amplifier Systems

Multi-zone audio hubs and multichannel amplifier controllers need one stable clock distributed to several subsystems, and the MK2703BSILF supplies that CMOS reference from a single crystal source in only 8 pins. Compared with a general fractional-N generator, the fixed-function device needs no I2C/SPI configuration, no microcontroller involvement and no calibration sequence, which shortens bring-up time and reduces firmware risk in cost-sensitive consumer electronics. The trade-off is that the output frequency and multiplication ratio cannot be changed in the field, so designs that need multiple selectable rates should plan a different clocking topology.

🏭

Industrial Audio and Intercom Control Panels

Industrial intercom and audio control panels operate in fixed installations where a stable clock is required for digital signal processing but the environment is hostile and long-lived. The MK2703BSILF suits this because the 8-pin SOIC (PDSO8) package, surface-mount assembly and tube packing are standard industrial manufacturing formats, and the fixed-function PLL needs no field updates after deployment. Using a single crystal reference limits the number of oscillators on the board, reducing failure points and EMI sources in a metal enclosure. Engineering teams should confirm the operating temperature grade and supply range against the industrial enclosure temperature before releasing the design.

🌐

Networked Media Player and Streaming Client

Networked media players synchronize decode, DAC and wireless subsystems to a common clock domain, and the MK2703BSILF provides the multiplied CMOS clock that keeps the audio chain coherent across the device. Its 27 MHz maximum output frequency suits classic streaming-client architectures where the audio path is separate from the main application processor domain. Since the device requires no serial programming, the network stack boot sequence stays simple and the clock is available as soon as power is applied. Designers migrating a legacy player revision should treat the obsolete status carefully and qualify a family alternative before the product reaches volume production.

🛠️

Legacy Board Revision and Sustaining Designs

The MK2703BSILF is most relevant today in sustaining programs: audio and multimedia boards built in the 2000s that still need an identical clock circuit for field replacements, spare-parts builds and repair depots. Because the 8-SOIC (PDSO8) footprint, 27 MHz maximum output frequency and CMOS output type are shared across the MK2703 family, the sibling parts act as drop-in replacements without any layout change. The practical engineering step is to verify pin-level compatibility against the datasheet pin description table and to secure traceability documentation where the application is safety- or warranty-sensitive. Obsolete status means stocking strategy matters as much as the circuit itself.

What is the MK2703BSILF?
The MK2703BSILF is a PLL audio clock synthesizer integrated circuit from Renesas Electronics, originally introduced by Integrated Device Technology, that produces a CMOS clock output up to 27 MHz from a crystal or external clock reference. According to the manufacturer datasheet for the MK2703B family, the device is a PLL clock synthesizer with the PLL enabled, no bypass option, and no divider or multiplier stage, housed in an 8-pin SOIC (PDSO8) surface-mount package.
What is the maximum output frequency of the MK2703BSILF?
The maximum output frequency of the MK2703BSILF is 27 MHz, with CMOS output type. The part accepts either a crystal or a clock reference at its input, runs an internal phase-locked loop to multiply that reference, and presents the result on CMOS-compatible outputs in a single 8-SOIC (PDSO8) package. Because there is no programmable divider or multiplier, the output frequency is fixed by the device's internal multiplication ratio rather than by user configuration.
What package does the MK2703BSILF come in?
The MK2703BSILF is supplied in an 8-pin SOIC package, designated PDSO8 by the manufacturer, with a body width of 0.154 in (3.90 mm). It is a surface-mount device with an 8-SOIC (0.154 in, 3.90 mm width) outline, and production units ship in tube packing. The same 8-pin SOIC footprint is used across the MK2703 family, which simplifies board reuse when moving between MK2703 variants.
Where can I download the MK2703BSILF datasheet PDF?
The authoritative document is the MK2703B datasheet published by Renesas Electronics, available from the Renesas document page for this family; an archived PDF copy is also distributed through alldatasheet as an 8-page document. The device is an 8-pin PLL audio clock synthesizer with a 27 MHz maximum output frequency, so the MK2703B datasheet covers the electrical characteristics, pin description and reference circuit for the MK2703BSILF ordering code.
Where do I find the MK2703BSILF pinout?
Use the pin description table and package outline drawing in the Renesas MK2703B datasheet for the definitive 8-pin SOIC (PDSO8) pin assignments, including which pins carry the crystal inputs, the supply and ground, and the CMOS clock outputs. Because the part is a fixed-function device with no bypass and no divider, the pin map is unambiguous, but always confirm the pin numbering against the top-mark orientation of the SOIC body before assigning PCB tracks.
Is the MK2703BSILF still an active part?
The MK2703BSILF is listed as obsolete in distributor lifecycle data, which means normal new-production stocking has ended and supply comes from remaining stock or qualified sourcing. Renesas publishes a cross-reference tool for finding equivalent components for legacy designs, and that search should be the first step in any replacement plan. Use the Request a Quote form on this page to check current availability and lead time for the obsolete ordering code.
What is the difference between MK2703BSILF and MK2703SILF?
Sequential database comparison of the MK2703BSILF and MK2703SILF shows no measurable differences across the primary technical parameters, so the two are functionally equivalent for most designs. Both are PLL clock synthesizers in the same 8-pin SOIC family with a 27 MHz maximum output frequency and CMOS output type, which makes the MK2703SILF the natural candidate when checking a second source for the same board revision.
MK2703BSILF vs MK2703BSLF - which one should I order?
The MK2703BSILF and MK2703BSLF are compared directly in parametric comparison databases and belong to the same Renesas/IDT PLL audio clock synthesizer family in the 8-SOIC package, so both drop into the same footprint. Because suffix changes on legacy IDT parts can indicate a silicon revision rather than a functional change, verify the specific revision in the MK2703B datasheet before substituting, and confirm the maximum output frequency of 27 MHz and CMOS output type match your design.
What is the best drop-in replacement for the MK2703BSILF?
The best drop-in replacements are the sibling parts in the same Renesas MK2703 family that share the 8-SOIC (PDSO8) footprint and the same 27 MHz CMOS PLL clock synthesizer function, notably MK2703SILF, MK2703S and MK2703BSLF. Each is listed as a drop-in option because the package, pinout and core clock parameters match, with the caveat that the exact silicon revision should be confirmed against the datasheet before volume commitment.
Can MK2703BSLFTR replace the MK2703BSILF?
Yes, the MK2703BSLFTR can serve as a replacement for the MK2703BSILF because it uses the same 8-pin SOIC package and the same PLL clock synthesizer function with CMOS output and a 27 MHz maximum output frequency; the trailing TR denotes a tape-and-reel shipping option rather than an electrical change. Because it is a packaging variant of a sibling MPN, confirm reel orientation, tape dimensions and moisture handling against your assembly process before substitution.
What can replace the MK2703BSILF?
The MK2703BSILF can be replaced by other members of the same Renesas MK2703 PLL clock synthesizer family in the 8-SOIC package, such as MK2703SILF, MK2703S or MK2703BSLF, all of which share the 27 MHz maximum output frequency, CMOS output type and crystal-or-clock input arrangement. Cross-brand drop-in equivalents are not documented in the available cross-reference results, so treat any third-party proposal as a redesign candidate until its pinout and jitter behaviour are verified.
Where can I buy the MK2703BSILF online?
Use the Request a Quote form on this page to source the MK2703BSILF from XAIPART, including allocation of remaining factory and distribution stock for this obsolete ordering code. Because the device is listed as obsolete, availability is quantity dependent and may include traceability and inspection options; submit the required quantity, package form (tube or reel) and target date with the request so the sourcing team can respond with a firm schedule.
What is the price of the MK2703BSILF?
Pricing for the MK2703BSILF is generated from live sourcing channels and is shown on this page through the quote workflow rather than as a static table, so request a quote for a binding figure at your quantity and package form. Because the part is obsolete, the value depends on remaining stock, traceability documentation and lot consistency. Submit your requirement through the Request a Quote form and the commercial terms will be returned with the availability confirmation.
What is the lead time for the MK2703BSILF?
The MK2703BSILF is an obsolete PLL clock synthesizer, so there is no standard factory lead time; delivery depends on remaining factory stock, authorized distribution inventory and, where required, qualified sourcing with traceability documentation. Request the current lead time through the Request a Quote form on this page by stating quantity, tube or reel packaging, target date and whether full traceability is needed, and the sourcing team will confirm the schedule for that configuration.
What are the key specifications of the MK2703BSILF that engineers should know?
The MK2703BSILF is a Renesas (IDT) PLL audio clock synthesizer IC with a 27 MHz maximum output frequency, CMOS output type, crystal or clock input, PLL enabled, no bypass, no divider and no multiplier, packaged in an 8-pin SOIC (PDSO8, 3.90 mm width) surface-mount package and shipped in tubes. The part is RoHS compliant and is currently listed as obsolete, which is the single most important planning fact for any new or sustaining design.
When should I choose the MK2703BSILF over the MK2703S?
Choose the MK2703BSILF when you are sustaining an existing audio board whose schematic and layout were already built around that ordering code and you want the lowest-risk path to keep the clocking section unchanged. Choose the MK2703S when you are starting a new layout or re-spinning and want to compare revision behaviour and availability before committing. In both cases the 8-SOIC footprint is shared, so no mechanical change is implied.
Is the MK2703BSILF suitable for audio DAC and codec clocking?
Yes, the MK2703BSILF is designed for exactly this class of application: it is described by the manufacturer as a PLL audio clock synthesizer that multiplies a crystal or clock reference and drives CMOS clock inputs of audio codecs and digital-to-analog converters up to 27 MHz. In such designs the crystal should sit close to the input pins and the supply pins should be locally bypassed with ceramic capacitance, because the fixed multiplication ratio means reference and supply noise map directly into the output clock.
What is the best Renesas equivalent for the MK2703BSILF?
The best Renesas equivalents are the sibling MK2703 family parts in the identical 8-SOIC (PDSO8) package, notably the MK2703SILF, the MK2703S and the MK2703BSLF, each of which is listed as functionally equivalent or pin-compatible with the MK2703BSILF for a 27 MHz CMOS PLL clock output. Renesas also publishes an official cross-reference tool for legacy designs, which should be used to confirm any equivalence before it is committed to a production build.

داتای سەرچاوەی ئەندازیاری بۆ MK2703BSILF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MK2703BSILF when you are sustaining an existing audio board whose schematic, layout and BOM already reference this ordering code and the goal is zero redesign risk; its 8-SOIC (PDSO8) footprint and 27 MHz CMOS PLL clock output are unchanged by any substitution. Choose MK2703SILF or MK2703S when a second source or a supply-chain hedge is needed for the same circuit, since comparison data shows identical primary performance profiles. Choose MK2703BSLF when a silicon revision or availability channel in the same family fits your sourcing plan. Choose MK2705SLFTR for new designs that need selectable output rates or a configurable PLL rather than the fixed 27 MHz function, accepting the additional configuration effort. Because the part is listed as obsolete, verify supply, traceability and the pin description table in the MK2703B datasheet before committing any candidate to production.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MK2703SILF MK2703S MK2703BSLF MK2705SLFTR MK2702BSILF
Package 8-SOIC (PDSO8) 8-SOIC (PDSO8) - same 8-SOIC (PDSO8) - same 8-SOIC (PDSO8) - same 8-SOIC (PDSO8) - same 8-SOIC (PDSO8) - same
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Device Type PLL Clock Synthesizer IC PLL Clock Synthesizer IC PLL Clock Synthesizer IC PLL Clock Synthesizer IC PLL Clock Synthesizer PLL Clock Synthesizer

جیاکەرەوە سەرەکییەکان

  • Direct pin-compatible family replacement without layout change (بەراورد بەMK2703SILF)
  • Fixed-function operation removes configuration overhead (بەراورد بەMK2705SLFTR)
  • RoHS-compliant 8-pin SMD construction for direct PCB rework (بەراورد بەMK2703BSLF)
  • Bypass-free PLL path for deterministic audio clocking (بەراورد بەMK2702BSILF)

تێبینییەکانی دیزاین

Place the crystal resonator or clock source as close as possible to the input pins and keep the reference loop area free of switching traces, because the multiplication ratio is fixed and any coupled noise appears directly on the multiplied clock output. Route the CMOS clock output as a short, impedance-controlled trace away from high-current switching nodes, and keep the output return path referenced to a continuous ground plane to limit radiated emissions.

Decouple the supply pins locally with ceramic capacitance placed within a few millimetres of the package, with a bulk capacitor nearby for supply-transient energy. The device multiplies the reference internally, so supply ripple at the supply pin is multiplied along with the signal. Keep the clock section on its own filtered branch from the main regulator rather than sharing a noisy switching converter node directly.

Do not assume a sibling MPN with a different suffix is electrically identical. Although comparison data shows the MK2703SILF, MK2703S and MK2703BSLF share the primary performance parameters of the MK2703BSILF, silicon revisions can change tested corners and marking. Verify the pin description table and the maximum output frequency in the family datasheet, and treat tape-and-reel variants such as the TR suffix as a packaging change only after confirming reel orientation and moisture handling.

The 8-pin SOIC (PDSO8) outline, 3.90 mm body width, is a standard footprint with ample pad geometry for a 27 MHz CMOS clock, so no high-speed layout techniques are required. Standard reflow profiles apply, and the part ships in tube packing, so plan pick-and-place and tube-to-reel handling accordingly for prototype quantities. Keep a thermal and copper-free region under any adjacent tall components to avoid package co-planarity problems.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

RoHS compliance is stated on the manufacturer product listing for this device. No REACH, lead-free, halogen-free or conflict-minerals declarations appear in the available technical documentation, so those fields are recorded as unknown.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MK2703BSILF MK2703BSILF datasheet MK2703BSILF datasheet pdf MK2703BSILF pinout MK2703BSILF equivalent MK2703BSILF replacement MK2703BSILF cross reference MK2703BSILF price MK2703BSILF stock Renesas MK2703BSILF MK2703B PLL audio clock synthesizer MK2703BSILF vs MK2703SILF MK2703BSILF vs MK2703BSLF 27MHz CMOS PLL clock synthesizer SOIC-8 MK2703BSILF audio codec master clock

پێکهاتە و زاراوە پەیوەندیدارەکان

Renesas Electronics Integrated Device Technology (IDT) MK2703BSILF MK2703SILF MK2703S MK2703BSLF MK2705SLFTR PLL clock synthesizer clock generator phase-locked loop jitter cleaner CMOS clock output crystal oscillator clock and timing IC surface mount device SOIC-8 PDSO8 package RoHS audio codec digital-to-analog converter master clock 27 MHz frequency synthesis obsolete component
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ