ئاگاداری دوایین کڕین: MK2745-21SLF نزیکە لە کۆتایی ژیان. دوایین ڕێکەوتی داواکاری: پەیوەندیمان پێوە بکە. بینینی بەشە جێگرەوە بەردەستەکان →
Renesas Electronics

MK2745-21SLF 80MHz DVD/MPEG Clock Source | Renesas

MPN: MK2745-21SLF ⚠ کۆتا کڕین
3 V to 5.5 V Vdss 16-SOIC, 0.150 inch width Package Analog phase-locked loop (PLL) Speed
MOQ: 1 |

MK2745-21SLF گشتی

Renesas Electronics MK2745-21SLF is an 80 MHz maximum-output clock synthesizer and frequency synthesizer designed for DVD players, MPEG 2 equipment, and related multimedia systems. It uses analog phase-locked loop technology, accepts a 27 MHz fundamental-mode crystal or clock input, and operates from a 3 V to 5.5 V supply in a 16-pin SOIC surface-mount package.

A clock synthesizer is a timing IC that derives one or more stable digital clock signals from a common reference. It belongs to the clock and timing hierarchy that includes clock generators, phase-locked loops, clock buffers, and clock dividers. The MK2745-21SLF consolidates reference conditioning, multiplication, division, and clock distribution into a device intended to simplify the timing architecture of DVD and MPEG 2 systems.

The device generates multiple audio output clocks, a processor clock, the processor clock divided by two, and fixed 27 MHz and 24 MHz-related outputs. Its maximum output frequency is 80 MHz, while its 27 MHz reference input supports integration with common DVD source-clock architectures. The 3 V to 5.5 V supply range allows operation from nominal 3.3 V and 5 V system rails, subject to the detailed operating limits in the manufacturer datasheet.

Its internal analog PLL multiplies or conditions the reference frequency to generate the required output clocks. Maintaining a single reference improves system timing coordination compared with independent oscillators, while the divided processor output supports systems that require related clocks at different rates. Exact output-drive, jitter, phase, and stability characteristics should be taken from the Renesas datasheet rather than inferred from the basic clock-function description.

Typical uses include DVD and MPEG 2 player mainboards, optical-disc playback systems, set-top equipment, and multimedia processors requiring coordinated audio and processor clocks. It is also appropriate for legacy equipment repairs where replacing a surface-mount clock-source IC without altering the existing board layout is important.

For a new design, verify every required output frequency, supported reference mode, voltage rail, load, and package footprint before committing the 16-pin SOIC footprint. Crystal selection and PLL loop components are timing-critical, so use the reference values and layout guidance in the manufacturer datasheet. Decoupling should be placed close to the supply pins, and unused outputs should be handled according to the device's output-drive and no-connect guidance.

This product page combines the Renesas device description with package information, verified sourcing links, engineering-oriented application guidance, and a parameter-by-parameter replacement comparison. It is intended to help engineers identify the correct clock-source function, assess board compatibility, and plan a qualified replacement or repair before layout changes are made.

جێگرەوەکانی جێگۆڕکێ بۆ MK2745-21SLF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MK2745-21SLF (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type.

Renesas Electronics
Device Type: Clock/Frequency Synthesizer IC
بەراوردکردن لەگەڵ MK2745-21SLF →

MK2745-21S

✅ جێگرەوەی ڕاستەوخۆ
Renesas Electronics
📦 16-SOIC (0.154 inch, 3.90 mm width)
Clock/Frequency Synthesizer IC · 80 MHz · Yes, analog PLL · 1 PLL circuit · Clock or crystal · 27 MHz · CMOS · 2:5

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MK2745-21S

✅ جێگرەوەی ڕاستەوخۆ
Renesas Electronics
📦 16-SOIC
Clock/Frequency Synthesizer IC · 80 MHz · Yes, analog PLL · 1 PLL circuit · Clock or crystal · 27 MHz · CMOS · 2:5

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MK2745-21SLF تایبەتمەندییەکان

Device Type Clock generator / clock and frequency synthesizer IC
Primary Function DVD and MPEG 2 clock source
Clock Generation Technology Analog phase-locked loop (PLL)
Maximum Output Frequency 80 MHz
Reference Input 27 MHz fundamental-mode crystal or clock input
Supply Voltage Range 3 V to 5.5 V
Output Functions Multiple audio output clocks, processor clock, and processor clock divided by two
Fixed Clock Outputs 27 MHz and 24 MHz
Bus Interface CMOS
Package Type 16-SOIC, 0.150 inch width
جۆری دامەزراندن Surface mount
Target Applications DVD players and MPEG 2-based systems

ڕێنمایی ڕێکخستنی پینی MK2745-21SLF 16-soic, 0.150 inch width

ڕێکخستنی پین بۆ MK2745-21SLF (پاکێجی 16-soic, 0.150 inch width). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 16-soic, 0.150 inch width بۆ MK2745-21SLF

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MK2745-21SLF.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MK2745-21SLF گونجاوە بۆ 6 بەکارھێنانs: DVD Player Mainboard Timing, MPEG 2 Multimedia Processor Board, Optical Disc Playback Equipment, Legacy Set-Top Box Repair, Clock-Distribution Retrofit, Audio-Video Clock Reference.

📀

DVD Player Mainboard Timing

The MK2745-21SLF fits legacy DVD player mainboards that require a common 27 MHz reference to produce coordinated audio and processor clocks. Its analog PLL architecture generates multiple audio outputs, an 80 MHz maximum-rate processor clock, and a divided processor clock from the same source. Using the dedicated DVD/MPEG clock-source device simplifies clock-tree replication and reduces the number of independent oscillators. The 16-SOIC package also matches boards designed around surface-mount clock-generation ICs. During repair, verify every output frequency and the original control-state requirements before replacement.

🖥️

MPEG 2 Multimedia Processor Board

MPEG 2 playback and processing boards can use the MK2745-21SLF to distribute related clock domains from one 27 MHz crystal or clock reference. The device produces multiple audio clocks along with processor and divided-processor outputs, reducing the complexity of maintaining several unrelated timing sources. Its maximum output frequency of 80 MHz covers the documented device class, while the 3 V to 5.5 V supply range supports common digital rails. The implementation must still account for each load's frequency, phase relationship, enable condition, and output-drive requirement from the manufacturer datasheet.

▶️

Optical Disc Playback Equipment

Optical-disc playback systems often combine audio, video, and processor timing within one board, making a dedicated clock synthesizer useful. The MK2745-21SLF accepts a 27 MHz fundamental-mode crystal or clock input and uses analog PLL techniques to derive several clock outputs. Its 80 MHz maximum output and fixed 27 MHz and 24 MHz outputs can simplify replication of established DVD timing architectures. When adapting the design to another media platform, confirm that every required clock exists in the output table and that oscillator startup and jitter are acceptable for the media subsystem.

📺

Legacy Set-Top Box Repair

The MK2745-21SLF is useful for maintaining older set-top and multimedia platforms whose clock trees were built around a dedicated DVD/MPEG clock-source IC. A same-family ordering code in the 16-SOIC format can support repair work without introducing a new package footprint. The important checks are the exact pin functions, 3 V to 5.5 V operating range, required 27 MHz reference, and availability of each audio and processor output. Because the original part has a last-buy lifecycle history, inventory planning should include traceability and a careful functional comparison before installation.

🔧

Clock-Distribution Retrofit

A clock-distribution retrofit can replace multiple loosely coordinated oscillators with a single MK2745-21SLF reference architecture. The analog PLL provides a common relationship among the 27 MHz source, the 80 MHz maximum-rate output, and the divided processor clock. This arrangement can reduce clock skew concerns and simplify firmware expectations that depend on derived, synchronized rates. The retrofit remains appropriate only when the required output frequencies, voltage levels, load capacities, and enable sequencing match the original system. Use the manufacturer's application circuit as the basis for the oscillator and decoupling layout.

🎧

Audio-Video Clock Reference

The multiple audio clocks generated by the MK2745-21SLF make it suitable for audio and video subsystems that need a shared reference in legacy MPEG equipment. Deriving the clocks from one 27 MHz input supports repeatable timing between digital audio and processor domains. The device is especially relevant when reproducing an established DVD architecture because its output set is tailored to that use case. For new multimedia designs, verify that the documented output frequencies and fixed clocks match every codec, DAC, and controller requirement, and evaluate jitter and phase margins using the complete system specification.

What is the Renesas MK2745-21SLF?
The Renesas MK2745-21SLF is an 80 MHz maximum-output DVD and MPEG 2 clock synthesizer that uses an analog phase-locked loop. According to the Renesas MK2745-21 datasheet, it accepts a 27 MHz crystal or clock reference and generates multiple audio clocks, a processor clock, a divided processor clock, and fixed clock outputs. It is intended for multimedia equipment requiring coordinated timing signals.
What are the key specifications of MK2745-21SLF that engineers should know?
The MK2745-21SLF combines a 27 MHz reference input, an 80 MHz maximum output frequency, a 3 V to 5.5 V operating range, and a 16-pin SOIC package. According to the Renesas MK2745-21 datasheet, its analog PLL generates multiple audio clocks and processor-related outputs from the common reference. The exact jitter, phase, and drive limits should be checked for the clock frequencies used by the target system.
Where can I download the MK2745-21SLF datasheet PDF?
The official MK2745-21 datasheet is available from Renesas Electronics at the product document page identified in the manufacturer datasheet link on this page. It describes the analog PLL architecture, supported reference input, generated clock outputs, electrical characteristics, and pin configuration. Use the manufacturer document for design decisions because generic clock-generator data may not include the exact output combinations required by DVD and MPEG 2 equipment.
Where can I find the MK2745-21SLF pinout?
The MK2745-21SLF pinout is identified in the pin-description table of the Renesas MK2745-21 datasheet. The component uses a 16-pin SOIC package, but a complete pin-by-pin assignment is not reproduced on this page. Assign PCB tracks and supply connections directly from the manufacturer diagram, including the crystal or clock input, clock outputs, control connections, ground pins, and any reserved or no-connect positions.
What supply voltage does the MK2745-21SLF require?
The MK2745-21SLF operates from a 3 V to 5.5 V supply, making it suitable for common 3.3 V and 5 V digital systems. According to the Renesas datasheet, this range applies to the complete clock-synthesis function rather than a single output. Designers should still check each clock output's voltage compatibility and ensure that the selected crystal, load capacitors, and external circuitry support the intended rail.
What clock outputs does the MK2745-21SLF generate?
The MK2745-21SLF generates multiple audio output clocks, a processor clock, the processor clock divided by two, and fixed 27 MHz and 24 MHz outputs. According to the Renesas MK2745-21 datasheet, these clocks are derived through analog PLL techniques from a 27 MHz fundamental-mode crystal or clock input. Verify output availability, drive strength, and enable behavior against the specific board requirements.
Is the MK2745-21SLF suitable for a DVD player clock circuit?
Yes, the MK2745-21SLF is specifically designed as a DVD and MPEG 2 clock source. Its 27 MHz reference input, analog PLL architecture, 80 MHz maximum output, multiple audio clocks, and processor-related outputs match the timing requirements of legacy DVD and MPEG 2 mainboards. Suitability still depends on matching the required output frequencies, supply voltage, package footprint, and control wiring of the original design.
Can the MK2745-21S replace the MK2745-21SLF?
The Renesas MK2745-21S is the closest documented family alternative because it is identified as a clock and frequency synthesizer in a 16-SOIC package with an 80 MHz maximum frequency. Its exact temperature suffix, availability marking, and electrical equivalence must be checked against the MK2745-21 datasheet before production use. The MK2745-21SLF is also associated with a last-buy date, so procurement should include a lifecycle review.
What is the difference between MK2745-21SLF and MK2745-21S?
The principal documented difference is the orderable suffix: MK2745-21SLF identifies the original Renesas ordering code, while MK2745-21S is listed as an 80 MHz clock and frequency synthesizer in a 16-SOIC package. The visible listing does not establish every temperature-grade, marking, or lifecycle detail. Compare the complete ordering information and manufacturer datasheet before treating MK2745-21S as a production drop-in replacement.
When should I choose the MK2745-21SLF over another clock generator?
Choose the MK2745-21SLF when repairing or reproducing a legacy DVD or MPEG 2 design that specifically expects its 27 MHz reference, generated audio clocks, processor clock, divided processor clock, and 80 MHz maximum output. A general-purpose clock generator is preferable only when its output map, electrical limits, control interface, and package can be verified against the complete board design. The original device offers the clearest path when the existing footprint and clock tree are unchanged.
What can replace the MK2745-21SLF?
The strongest documented replacement candidate is the Renesas MK2745-21S, which is listed in the same 16-SOIC clock-synthesizer family with an 80 MHz maximum frequency. No verified cross-brand, pin-to-pin replacement was identified, so the MK2745-21S should be treated as a family candidate rather than an automatically approved substitute. Confirm pin functions, output availability, electrical limits, temperature grade, and lifecycle status before substitution.
Is there a Renesas equivalent for the MK2745-21SLF?
The Renesas MK2745-21S is the relevant same-family equivalent candidate for the MK2745-21SLF because the listing identifies both as 80 MHz clock and frequency synthesizer ICs in 16-SOIC packages. A definitive production replacement requires comparison of the full ordering codes and datasheet limits. The available information does not establish a cross-brand equivalent, so a broader substitution would carry a higher verification risk.
Where can I buy MK2745-21SLF and check its lead time?
Use the Request a Quote form on this page to request MK2745-21SLF availability, current lead time, and order quantity. Because the MK2745-21SLF is associated with a 2015 last-buy date, procurement should explicitly confirm remaining supply, traceability, and any obsolescence risk. Do not assume that a catalog listing guarantees production allocation or future replenishment.
What is the current price and stock status of MK2745-21SLF?
Current price and stock status should be confirmed through the Request a Quote form on this page because the available listing information does not provide a reliable quantity-break table or an active inventory commitment for this exact ordering code. The device is associated with a last-buy lifecycle status, so availability may be limited and should be treated as case-specific. Request the required quantity, packaging form, and traceability details with the quote.
How should the MK2745-21SLF crystal and PLL layout be designed?
Design the reference oscillator and PLL section by following the application circuit, crystal load-capacitor values, grounding, and layout guidance in the Renesas MK2745-21 datasheet. Keep the crystal and its load network close to the oscillator pins, provide local supply bypassing at the device, and avoid routing sensitive clock traces through noisy power-stage areas. Confirm the crystal frequency, load rating, drive level, and startup behavior for the exact board.

داتای سەرچاوەی ئەندازیاری بۆ MK2745-21SLF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MK2745-21SLF for repair, replication, or redesign of a DVD or MPEG 2 platform whose existing clock tree expects a 27 MHz reference, analog PLL operation, multiple audio outputs, and processor-related clocks. The 16-SOIC package is suitable for boards designed around this clock-source family. Consider the Renesas MK2745-21S only after checking its complete ordering information, temperature grade, pin compatibility, and lifecycle position. The base MK2745-21 ordering code is another same-family candidate, but its exact suffix and supply status must be confirmed. Do not select a generic or cross-brand clock generator solely from its maximum frequency; the output map, reference requirements, control logic, supply range, and timing characteristics must match the original system. Because the original device is associated with a last-buy date, treat availability and traceability as procurement requirements rather than assuming continuing production.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MK2745-21S MK2745-21
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Package 16-SOIC, 0.150 inch width 16-SOIC, 0.154 inch, 3.90 mm width 16-SOIC family package
Device Type Clock generator / clock and frequency synthesizer IC Clock and frequency synthesizer IC DVD and MPEG 2 clock synthesizer
Primary Application DVD and MPEG 2 systems DVD and MPEG 2 clock source DVD and other MPEG 2-based applications

جیاکەرەوە سەرەکییەکان

  • Purpose-built output set for legacy multimedia clock trees (بەراورد بەMK2745-21)
  • Documented 16-SOIC package compatibility (بەراورد بەMK2745-21S)
  • Common-reference analog PLL architecture (بەراورد بەMK2745-21S)

تێبینییەکانی دیزاین

Place the 27 MHz crystal and its load capacitors close to the oscillator pins and keep the oscillator loop compact. Route the reference away from switching-converter nodes and high-current return paths. Because the device uses an analog PLL, small changes to stray capacitance and return impedance can affect startup or clock quality; reproduce the manufacturer application layout and use a short ground return for the reference network.

Follow the manufacturer pin-description table when assigning the 16-SOIC footprint. Verify supply, ground, crystal, control, and clock-output connections rather than relying on the abbreviated ordering code. Place local bypass capacitors at the device supply pins and provide an unobstructed return to the ground plane. For repair boards, inspect for lifted or contaminated SOIC pins because poor soldering can appear as unstable or missing PLL outputs.

Confirm each clock output's required frequency, phase relationship, load, and receiver timing margin before enabling the complete clock tree. Keep clock traces short, use controlled reference planes, and avoid unnecessary test-point stubs on sensitive oscillator or PLL nodes. When comparing a replacement with the MK2745-21SLF, evaluate both edge quality and jitter at the actual receiving circuit instead of relying only on the maximum frequency.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The Renesas MK2745-21 datasheet is the governing technical document, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified. Automotive qualification should not be assumed for this multimedia clock-source device.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MK2745-21SLF datasheet MK2745-21SLF pinout MK2745-21SLF datasheet pdf MK2745-21SLF specifications MK2745-21SLF 16-SOIC MK2745-21SLF 80MHz MK2745-21SLF equivalent MK2745-21SLF replacement MK2745-21SLF cross reference MK2745-21SLF vs MK2745-21S Renesas MK2745-21SLF MK2745-21SLF DVD clock source MK2745-21SLF application circuit MK2745-21SLF price MK2745-21SLF stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Renesas Electronics MK2745-21SLF MK2745-21S MK2745-21 clock synthesizer clock generator frequency synthesizer phase-locked loop analog PLL DVD clock source MPEG 2 timing 27 MHz reference clock 80 MHz maximum output CMOS clock output 16-SOIC SOIC package family surface-mount package DVD player mainboard optical disc playback legacy multimedia system audio clock generation processor clock division 3 V to 5.5 V supply
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ