MK2746-01GLF - 27MHz USB-DVR Clock Synthesizer | Renesas
MPN: MK2746-01GLF ✓ چالاکMK2746-01GLF گشتی
A clock synthesizer is a timing IC that accepts a reference clock and derives one or more related output clocks. The clock synthesizer category belongs to the broader clock and timing hierarchy, which includes clock generators, phase-locked loops, frequency synthesizers, dividers, buffers, and timing controllers. In a USB-DVR system, this device helps organize reference-clock distribution so that digital video, USB, and associated processing circuits can operate from a controlled clock source.
The MK2746-01GLF is specified as a clock/frequency synthesizer IC with a single circuit, CMOS output type, and clock or crystal input. Its analog PLL architecture is intended for multiple-output USB and video clock generation, while the bypass function provides a direct clocking path when the system requires it. The low-jitter, low-cost positioning makes the part relevant to cost-sensitive consumer electronics, set-top equipment, USB-DVR designs, and other embedded multimedia platforms.
The exact output-frequency plan, voltage ratings, supply-current limits, operating-temperature limits, and pin-level electrical characteristics are not stated in the retrieved manufacturer synopsis. Those parameters should be confirmed in the Renesas MK2746-01 datasheet before schematic capture, crystal selection, or PCB release. In particular, confirm each output's frequency, supply voltage, enable or bypass behavior, and grounding requirements against the exact system timing tree.
A typical implementation uses a 27 MHz crystal or clock source at the reference input, routes the synthesized outputs to the required USB and video clock domains, and decouples the supply pins close to the device. Because the part is packaged in a 16-pin TSSOP, the layout should preserve its compact footprint while keeping crystal and clock traces short. The application guidance below focuses on the part's documented USB-DVR clock-generation role rather than assuming an unverified output configuration.
This page consolidates the documented USB-DVR application, 27 MHz reference capability, PLL and bypass functions, package information, and verified replacement information into an engineering-oriented selection guide. Review the manufacturer datasheet for the complete pin descriptions, timing diagrams, recommended crystal network, electrical limits, and reference design values before releasing production hardware.
جێگرەوەکانی جێگۆڕکێ بۆ MK2746-01GLF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MK2746-01GLF (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Input Type, Package, Product Type.
MK2746-01G
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MK2746-01GLF تایبەتمەندییەکان
| Product Type | Clock/Frequency Synthesizer IC |
| PLL | Yes, with bypass |
| Input Type | 27 MHz clock or fundamental-mode crystal |
| جۆری دەرچوون | CMOS |
| Maximum Frequency | 27 MHz |
| Number of Circuits | 1 circuit |
| Input-to-Output Ratio | 2:5 |
| ژمارەی پینەکان | 16 pins |
| پاکێج | 16-TSSOP, 0.173 inch lead pitch |
| شێوازی دامەزراندن | Surface mount |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Application | USB-DVR clock generation |
| Architecture | Analog phase-locked loop |
| Temperature Grade | Commercial |
ڕێنمایی ڕێکخستنی پینی MK2746-01GLF rectangular
ڕێکخستنی پین بۆ MK2746-01GLF (پاکێجی rectangular). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MK2746-01GLF.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MK2746-01GLF گونجاوە بۆ 6 بەکارھێنانs: USB-DVR Reference Clocking, Set-Top Video Clock Distribution, USB Interface Timing, Consumer Multimedia Processor Clocking, MPEG2-Based Video Equipment, Compact Embedded Clock Module.
USB-DVR Reference Clocking
The MK2746-01GLF fits a USB-DVR design that uses a 27 MHz crystal or clock reference to derive clocks for USB and video functions. Its documented analog PLL architecture and multiple-output capability reduce the number of independent clock sources required by a multimedia system. The implementation can place the reference source and oscillator network close to the device, then route only the required clock domains to downstream circuitry. Before layout, confirm the exact output-frequency assignments, supply voltage, enable logic, bypass behavior, and output-drive limits in the Renesas MK2746-01 datasheet. The 16-pin TSSOP footprint supports compact consumer-electronics construction, while short clock traces help reduce coupling and maintain signal integrity.
پێشنیارکراو
Set-Top Video Clock Distribution
The MK2746-01GLF is appropriate for set-top and MPEG-related video equipment where a common 27 MHz reference can support several related clock domains. By using analog PLL synthesis, the device can organize clock outputs around a single reference source instead of relying on multiple unrelated oscillators. This architecture is useful when the system needs deterministic clock relationships between processor, audio, bus, memory, or video interface sections. Engineers should map the intended outputs against the manufacturer timing diagrams before assigning nets, especially where bypass mode changes the clock path. Keep the 27 MHz reference and sensitive output routes compact, observe the recommended grounding and supply-decoupling arrangement, and verify that each downstream load remains within the documented CMOS output capability.
پێشنیارکراو
USB Interface Timing
The MK2746-01GLF can support USB timing in a multimedia appliance when the 27 MHz reference and the generated USB clock satisfy the interface's frequency and jitter requirements. Its low-jitter positioning is relevant because clock quality can affect data sampling margin and interoperability across a USB link. The clock source should be connected according to the manufacturer's reference configuration, with short traces, a stable return path, and local supply decoupling. Engineers must compare the documented output timing and load assumptions with the USB controller requirements rather than assuming every USB clock domain is interchangeable. During bring-up, measure the active and bypass outputs with suitable test points, verify startup sequencing, and confirm that the downstream receiver has adequate clock margin across voltage and temperature.
پێشنیارکراو
Consumer Multimedia Processor Clocking
The MK2746-01GLF fits consumer multimedia processors that need related clocks from one 27 MHz reference. Consolidating clock generation can simplify system architecture and reduce the number of independent oscillator components in a compact USB-DVR or set-top design. The device's CMOS outputs can feed suitable digital timing domains when their frequency, drive strength, and loading match the receiving circuitry. Layout should separate sensitive clock routes from high-current switching nodes and maintain a continuous ground reference under the TSSOP. Firmware and hardware validation should include checking clock presence after power-up, exercising bypass transitions, and confirming that every downstream domain remains within its timing budget. Confirm supply sequencing and power-current behavior against the complete Renesas electrical specification before production use.
پێشنیارکراو
MPEG2-Based Video Equipment
The MK2746-01GLF is relevant to MPEG2-based video equipment because the related MK2746 family is identified for generating processor, audio, bus-driver, SDRAM, and other system clocks from a 27 MHz reference. The -01 variant focuses on USB-DVR use, so the system clock map must match the specific device datasheet rather than the broader family description. This makes it well suited to compact consumer products that require coordinated timing across several digital blocks. Designers should create a clock-budget table for each output, check duty-cycle and edge-rate requirements, and reserve component footprints for the manufacturer's recommended crystal network. Short, impedance-controlled clock traces and local decoupling are especially important where the device sits between a crystal network and several high-speed digital loads.
پێشنیارکراو
Compact Embedded Clock Module
The MK2746-01GLF can serve as the timing center of a compact embedded module when a 27 MHz crystal provides the primary reference and several derived clocks are needed. Its 16-pin TSSOP package leaves more board area than a larger clock-generator package and is suitable for tightly integrated consumer electronics. The design should reserve the full manufacturer-recommended support network and follow the exact pin assignments for input, outputs, control, supply, and ground. Because clock-generation ICs can couple reference harmonics into nearby analog sections, place the device away from sensitive analog routing and maintain conservative return paths. Validate frequency, jitter, and startup behavior at the module's intended supply voltage, and use the bypass path only where the manufacturer's switching requirements are satisfied.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MK2746-01GLF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MK2746-01G |
|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics |
| Package | 16-TSSOP, 0.173 inch lead pitch | 16-TSSOP |
| Product Type | Clock/Frequency Synthesizer IC | USB-DVR clock-source IC |
| Number of Pins | 16 pins | 16 pins |
جیاکەرەوە سەرەکییەکان
- Purpose-built USB-DVR clock synthesis (بەراورد بەMK2746-01G)
- Documented PLL and bypass functions (بەراورد بەMK2746-01G)
- Compact identified package and pin count (بەراورد بەMK2746-01G)
تێبینییەکانی دیزاین
Place the 27 MHz crystal and its required load network close to the reference-input pins, and keep the clock routes away from switching-node copper and noisy digital returns. Route each output according to the manufacturer's recommended topology, using a continuous ground reference beneath the TSSOP where practical. Confirm the exact pin assignments and recommended external values in the Renesas datasheet before fixing the layout.
Treat the oscillator and PLL outputs as high-value timing nets even though they are digital CMOS signals. Keep traces short, minimize unnecessary stubs, preserve return continuity, and avoid routing clock lines beside parallel buses or power inductors. Validate eye margin, duty cycle, startup time, and bypass-transition behavior on the assembled board because the package-level timing specifications do not guarantee adequate system margins after PCB effects.
Decouple each supply connection using the capacitance and placement required by the Renesas application guidance, and verify the complete current consumption across operating frequency, bypass state, and supply voltage. The retrieved synopsis does not provide a usable supply-current limit, so do not size the regulator from an assumed value. Confirm the operating-voltage range and absolute maximum ratings in the manufacturer datasheet before power-up.
Do not assume that similarly suffixed MK2746 devices are interchangeable. Compare the complete pin-description table, output-frequency map, control logic, bypass behavior, electrical limits, and package drawing for the exact ordering code. In particular, confirm that the 2:5 ratio and 27 MHz maximum frequency correspond to the clock plan being used, and that the alternative's lead numbering aligns with the existing footprint.
زانیاری پابەندبوون
The exact-ordering-code compliance declarations were not stated in the retrieved manufacturer synopsis. One catalog description identifies the part as commercial grade but does not establish RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status.