NXP Semiconductors

MKE16Z32VLF4 - 48MHz 32KB Cortex-M0+ MCU | NXP | 48-LQFP

MPN: MKE16Z32VLF4 ✓ چالاک
3.3 V to 5 V Vdss 48-LQFP, 7 x 7 mm Package 48 MHz Speed 32 KB Memory
MOQ: 1 |

MKE16Z32VLF4 گشتی

The NXP Semiconductors MKE16Z32VLF4 is a 32-bit Arm Cortex-M0+ Kinetis KE1xZ microcontroller operating at up to 48 MHz, with 32 KB of Flash memory and a 48-LQFP 7 x 7 mm package. It supports 3.3 V and 5 V main-stream operation and integrates CAN control, NXP Touch sensing, analog features, and FlexIO capabilities for automotive and industrial systems.

A microcontroller is a semiconductor that integrates a processor core, programmable memory, peripheral interfaces, and I/O into one compact device. The Cortex-M0+ architecture uses the Arm instruction set and provides a low-complexity platform for embedded control. Within the product hierarchy, MKE16Z32VLF4 belongs to the Cortex-M0+ microcontroller, embedded processor, and semiconductor categories, combining deterministic control with communication and touch-capable peripherals.

The principal features include a 48 MHz maximum clock, 32 KB Flash, 4 KB SRAM, a 48-LQFP package, CAN connectivity, and NXP Touch sensing through the TSI peripheral. Its 3.3 V and 5 V operating support allows deployment across common industrial and automotive supply environments. The combination of local flash, a compact package, and multiple communication functions makes the device suitable for systems that need flexible sensing and network connectivity without a separate high-performance processor.

The KE1xZ architecture is intended for cost-conscious embedded applications requiring broad peripheral integration. Flash provides executable program storage, while SRAM supports working memory for control logic and communication stacks. FlexIO adds programmable interface flexibility, while the CAN controller supports industrial networking. NXP Touch sensing supports touch keys, sliders, and rotary controls, reducing the need for discrete input devices in control panels and compact human-interface equipment.

Typical uses include automotive body and comfort modules, industrial controllers, CAN-connected sensors, touch-equipped control panels, building equipment, and compact embedded systems. Its 48 MHz Cortex-M0+ core is sufficient for supervisory control, protocol handling, state-machine logic, and peripheral coordination. Applications requiring larger code storage should be evaluated separately, because this MPN contains 32 KB rather than 64 KB of Flash.

PCB design should preserve the manufacturer's recommended power, decoupling, clock, and decoupling-capacitor placement. The 48-LQFP footprint requires adequate fan-out routing and careful inspection of exposed power and ground pins. Firmware changes should also account for the 32 KB Flash ceiling and the MCU's peripheral multiplexing rather than assuming every connector or peripheral signal is simultaneously available.

This product record combines device specifications, source links, application guidance, design considerations, and like-for-like Kinetis family alternatives. It is intended to help engineers establish whether the 48 MHz Cortex-M0+ core, 32 KB Flash, CAN, touch sensing, and 48-LQFP package fit the mechanical and electrical requirements of an embedded design.

جێگرەوەکانی جێگۆڕکێ بۆ MKE16Z32VLF4 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MKE16Z32VLF4 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, Supply Voltage, Product Family.

NXP Semiconductors
Flash Memory: 64 KB
Package: 48-LQFP, 7 mm x 7 mm
Product Family: Kinetis KE1xZ
بەراوردکردن لەگەڵ MKE16Z32VLF4 →
NXP Semiconductors
Flash Memory: 32 KB (32K x 8)
Package: 48-QFN (7x7 mm) with exposed pad
Supply Voltage: 1.8 V / 2.5 V / 3.3 V
بەراوردکردن لەگەڵ MKE16Z32VLF4 →

KE16Z32VLF4

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 48-LQFP (7x7 mm)
Same 48 MHz Cortex-M0+ core, 32 KB Flash, 4 KB RAM, and 48-LQFP footprint; order-code grade differs by 0% in core frequency and memory

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MKE16Z64VLF4

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
NXP Semiconductors
📦 48-LQFP (7x7 mm)
32-bit ARM Cortex-M0+ Microcontroller · Kinetis KE1xZ · 48 MHz · 64 KB · 8 KB · Arm Cortex-M0+ · 3.3 V to 5 V · 48-LQFP, 7 mm x 7 mm

پەیوەندی بۆ نرخ

بینینی داتاشیت →

KE16Z64VLF4

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 48-LQFP (7x7 mm)
Same package, 48 MHz core, and 4 KB RAM; Flash increases from 32 KB to 64 KB by 32 KB while frequency changes by 0%

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MKE16Z16VLF4

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 48-LQFP (7x7 mm)
Same 48 MHz Cortex-M0+ core and 48-LQFP footprint; Flash decreases from 32 KB to 16 KB by 16 KB while CPU frequency remains unchanged

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

KE16Z16VLF4

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 48-LQFP (7x7 mm)
Same package, 48 MHz CPU, and 4 KB RAM; Flash decreases from 32 KB to 16 KB by 16 KB while frequency changes by 0%

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MKE16Z32VLF4 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 32-bit Arm Cortex-M0+ microcontroller
Series Kinetis KE1xZ
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB
Flash Organization 32K x 8 bits
RAM 4 KB
Core Architecture 32-bit Arm Cortex-M0+
ڤۆڵتیەی دابینکردن 3.3 V to 5 V
پاکێج 48-LQFP, 7 x 7 mm
Package Pin Count 48 pins
جۆری دامەزراندن Surface mount
Communication Interface CAN control
Touch Sensing NXP Touch sensing interface
Programmable I/O FlexIO
Analog Features Integrated analog features
RoHS Compliance Compliant

ڕێنمایی ڕێکخستنی پینی MKE16Z32VLF4 48 pins

ڕێکخستنی پین بۆ MKE16Z32VLF4 (پاکێجی 48 pins). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 48 pins بۆ MKE16Z32VLF4

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MKE16Z32VLF4.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MKE16Z32VLF4 گونجاوە بۆ 6 بەکارھێنانs: Automotive Body Control Modules, CAN-Connected Industrial Sensors, Touch-Equipped Control Panels, Industrial Communication Hubs, Building Equipment Control Modules, Compact Embedded Control Modules.

🚗

Automotive Body Control Modules

The MKE16Z32VLF4 fits compact body-control modules that coordinate switches, lamps, inputs, CAN traffic, and local diagnostic logic. Its 48 MHz Cortex-M0+ core provides sufficient performance for event handling and protocol tasks, while 32 KB Flash stores application code and 4 KB SRAM supports buffers and state variables. Integrated CAN reduces the need for a separate communications controller, and the 48-LQFP 7 x 7 mm package supports space-constrained electronics. The primary engineering trade-off is the 32 KB code ceiling: reserve space for diagnostics, bootloader functionality, and future updates, and confirm the exact temperature and qualification grade in the NXP ordering information.

🏭

CAN-Connected Industrial Sensors

The MKE16Z32VLF4 is appropriate for industrial sensors that must sample analog inputs, run local compensation, and report measurements over a CAN network. Its 48 MHz Arm Cortex-M0+ core can service interrupts, filtering, and communication tasks, while the integrated analog features reduce the amount of external signal conditioning required. Four kilobytes of SRAM is useful for working buffers and a compact protocol stack, and FlexIO can extend peripheral options when fixed functions are insufficient. Designers should validate conversion performance, input protection, CAN timing, and calibration storage for the intended sensor, while keeping firmware within the 32 KB Flash budget.

🧩

Touch-Equipped Control Panels

The MKE16Z32VLF4 supports compact human-interface modules that combine capacitive touch controls with CAN-connected supervisory logic. NXP Touch sensing allows touch keys, sliders, or rotary controls to share a controller with the application firmware, reducing separate sensor hardware and panel wiring. The 48 MHz Cortex-M0+ core can scan touch inputs while managing debouncing, local indication, and network communication. The 48-LQFP package simplifies assembly compared with a larger leaded outline, but the layout must follow the touch-controller guidance for sensor geometry, guard traces, grounding, and filtering. Firmware capacity must also cover UI behavior, touch calibration, diagnostics, and communication code.

🌐

Industrial Communication Hubs

The MKE16Z32VLF4 can act as the central controller in a compact industrial communication hub that translates or manages CAN traffic and local digital I/O. Its integrated CAN controller, FlexIO, and 48 MHz Cortex-M0+ performance provide adequate throughput for supervisory protocols, routing tables, status reporting, and fault handling. The 32 KB Flash capacity is suitable when the hub has a defined protocol and limited local logging, but it may be restrictive for gateways requiring multiple protocol stacks, secure boot, or extensive diagnostics. Designers should calculate code and RAM requirements before finalizing the firmware, and use the manufacturer's reference clock, termination, and bus-layout guidance for reliable CAN communication.

⚡

Building Equipment Control Modules

The MKE16Z32VLF4 is well suited to building equipment controllers that combine analog monitoring, digital control, CAN connectivity, and local touch interfaces. For pumps, valves, lighting controllers, or HVAC interfaces, the Cortex-M0+ core can execute control state machines, while 4 KB SRAM accommodates temporary measurement and communication data. The integrated analog and FlexIO features can simplify board design when their electrical limits meet the application. A 7 x 7 mm LQFP preserves a conventional surface-mount assembly process and provides exposed perimeter access for general-purpose I/O. Validation should cover environmental limits, isolation strategy, analog grounding, brownout behavior, communication fault recovery, and the memory margin needed for field maintenance.

🔧

Compact Embedded Control Modules

The MKE16Z32VLF4 works well as the controller for compact embedded modules that combine a real-time state machine, local data acquisition, and serial communication. Its 48 MHz Cortex-M0+ processing capability provides responsive peripheral handling without the complexity of a higher-tier processor, and 32 KB Flash is suitable for focused applications with modest code requirements. FlexIO offers additional peripheral options beyond the fixed CAN and touch functions, helping designers preserve a common board platform. The main limitation is code density: larger protocol stacks, logging, encryption, or bootloader features can exhaust the available 32 KB. A memory budget should therefore be established during firmware planning, and every unused peripheral should be disabled to reduce system complexity.

What are the key specifications of MKE16Z32VLF4 that engineers should know?
The MKE16Z32VLF4 is a 48 MHz, 32-bit Arm Cortex-M0+ microcontroller with 32 KB Flash, 4 KB SRAM, CAN control, NXP Touch sensing, and FlexIO in a 48-LQFP 7 x 7 mm package. The NXP product information and distributor listings identify the Kinetis KE1xZ family and 3.3 V or 5 V main-stream operation. Its integration is especially useful when a design needs local control logic, network communication, and touch-capable input without adding separate interface devices.
Where can I download the MKE16Z32VLF4 datasheet PDF?
The MKE16Z32VLF4 datasheet can be obtained through the official NXP product page at https://www.nxp.com/part/MKE16Z32VLF4, where the manufacturer provides the Data Sheet document. The NXP page also identifies the part as active and links its operating features, environmental information, product notices, and ordering options. Engineers should use the NXP document for pin assignments, electrical limits, clock requirements, and recommended application circuits.
Where can I find the MKE16Z32VLF4 pinout?
The MKE16Z32VLF4 pinout is defined in the pin-description table of the NXP Kinetis KE1xZ datasheet. The device uses a 48-LQFP package, so the PCB footprint and pin numbering should be checked against the package drawing and pin table before routing begins. Assign signals using the manufacturer's alternate-function and multiplexing tables rather than assuming every peripheral function is simultaneously available on every port pin.
What is the maximum CPU frequency of MKE16Z32VLF4?
The MKE16Z32VLF4 has a maximum CPU frequency of 48 MHz according to its NXP product listing and distributor specifications. This Cortex-M0+ operating rate supports responsive supervisory control, peripheral service routines, communication handling, and moderate real-time workloads. Actual application performance also depends on bus configuration, flash wait states, interrupt latency, and the selected clock source.
How much Flash and RAM does MKE16Z32VLF4 contain?
The MKE16Z32VLF4 contains 32 KB of Flash organized as 32K x 8 bits and 4 KB of SRAM. The 32 KB Flash level is adequate for compact embedded applications, but firmware size, bootloader space, calibration data, and update storage must be checked against that limit. The 4 KB SRAM supports stack, variables, buffers, and protocol state without the memory overhead of a larger MCU.
What communication and peripheral features are integrated in MKE16Z32VLF4?
The MKE16Z32VLF4 integrates CAN control, NXP Touch sensing, FlexIO, and analog features in a Kinetis KE1xZ microcontroller. CAN supports connected industrial or automotive control networks, while FlexIO provides programmable interface flexibility. The NXP Touch interface supports capacitive sensing functions, allowing touch keys, sliders, or rotary controls to be implemented when the external sensor geometry and firmware are properly designed.
Is MKE16Z32VLF4 suitable for automotive and industrial applications?
Yes, the MKE16Z32VLF4 is suitable for automotive and industrial embedded-control designs because it combines CAN, analog functions, touch sensing, and 3.3 V or 5 V operation in one 48-LQFP device. Suitability also depends on the required temperature grade, automotive qualification, transient tolerance, and lifecycle expectations. Confirm those device-specific requirements in the NXP datasheet before releasing a production design.
MKE16Z32VLF4 vs KE16Z32VLF4 - which is better for an automotive design?
MKE16Z32VLF4 and KE16Z32VLF4 are closely related 48 MHz, 32 KB Kinetis KE1xZ devices in the same 48-LQFP footprint, but their order-code temperature or qualification grades must be checked before substitution. MKE16Z32VLF4 is the named target for the design, while KE16Z32VLF4 may represent a different grade. Compare the NXP ordering information, temperature range, qualification statement, and exposed-device status before making a replacement.
When should I choose MKE16Z32VLF4 over MKE16Z64VLF4?
Choose MKE16Z32VLF4 when 32 KB of Flash is sufficient and the 48-LQFP 7 x 7 mm footprint is required. Choose MKE16Z64VLF4 when firmware, a bootloader, data logging, or field updates require 64 KB, which is twice the available Flash of MKE16Z32VLF4. Because both devices use the same family and package, the decision should be based on code margin, memory longevity, and validated grade rather than board interchange alone.
Is MKE16Z32VLF4 the same as MKE16Z64VLF4?
No. MKE16Z32VLF4 and MKE16Z64VLF4 are related Kinetis KE1xZ devices, but their Flash capacities differ by 32 KB: 32 KB versus 64 KB. Their shared 48-LQFP package makes PCB reuse practical, yet firmware requiring more than 32 KB will not fit in MKE16Z32VLF4. Check memory use, startup code, and update requirements before treating the higher-density device as an equivalent.
What can replace MKE16Z32VLF4 without changing the PCB footprint?
A footprint-compatible replacement must use the 48-LQFP 7 x 7 mm package and preserve the same electrical, clock, peripheral, and software expectations. The closest documented options are Kinetis KE1xZ family variants such as MKE16Z64VLF4, MKE16Z16VLF4, KE16Z32VLF4, KE16Z64VLF4, and KE16Z16VLF4, subject to their order-code grade and memory differences. No cross-brand drop-in replacement is established by the available manufacturer and cross-reference records.
What is the best cross-brand equivalent for MKE16Z32VLF4?
No cross-brand drop-in equivalent is established for MKE16Z32VLF4 by the available component records. A functional substitute may use a different package, peripheral arrangement, memory map, voltage range, or programming ecosystem, so it cannot automatically replace the 48-LQFP Kinetis design. Use the Request a Quote form on this page when a cross-brand review is required, and request a controlled form-fit-function and firmware migration assessment before ordering.
How should I plan power and decoupling for the MKE16Z32VLF4?
Follow the NXP datasheet's recommended supply and decoupling network for the 48-LQFP device. Place each required decoupling capacitor close to its associated VDD and ground pins, keep supply paths compact, and provide adequate return paths beneath the device. Avoid adding large capacitor loops that increase radiated or conducted noise, and verify voltage limits, source impedance, startup sequencing, and analog-supply requirements in the final schematic and layout.
How much lead time is available for MKE16Z32VLF4?
The current lead time for MKE16Z32VLF4 should be requested through the Request a Quote form on this page. Lead time depends on the requested package, quantity, and manufacturing schedule, and NXP identifies the MPN as active. For production planning, provide the forecast quantity and required delivery date so the procurement team can confirm current availability and scheduling.
Is MKE16Z32VLF4 in stock and where can I buy it?
The MKE16Z32VLF4 is listed as active by NXP, while current stock and delivery schedules can change by quantity and package format. Use the Request a Quote form on this page to request current availability, pricing, and lead time for the exact MPN. The requested order should specify MKE16Z32VLF4 explicitly so the manufacturer order code, package, and production requirements remain unambiguous.

داتای سەرچاوەی ئەندازیاری بۆ MKE16Z32VLF4 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose MKE16Z32VLF4 when the design needs a 48 MHz Arm Cortex-M0+ controller with 32 KB Flash, 4 KB RAM, CAN, NXP Touch sensing, FlexIO, and a 7 x 7 mm 48-LQFP footprint. It is a practical match for compact automotive modules, industrial sensors, communication hubs, and touch-equipped controls whose firmware remains comfortably below 32 KB. Select MKE16Z64VLF4 or KE16Z64VLF4 when a bootloader, richer diagnostics, protocol stacks, or field-update capability requires the additional 32 KB of Flash. Select the 16 KB variants only when the final linked firmware, vectors, and reserved memory fit with a controlled margin. Before ordering KE-series alternatives, verify the exact temperature range, qualification grade, lifecycle status, and exposed-device configuration. No cross-brand part should be treated as a drop-in replacement without a completed pin, clock, memory-map, peripheral, and firmware compatibility review.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە KE16Z32VLF4 MKE16Z64VLF4 KE16Z64VLF4 MKE16Z16VLF4 KE16Z16VLF4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm)
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Flash Memory 32 KB 32 KB 64 KB 64 KB 16 KB 16 KB
RAM 4 KB 4 KB 4 KB 4 KB 4 KB 4 KB
Supply Voltage 3.3 V to 5 V 3.3 V to 5 V 3.3 V to 5 V 3.3 V to 5 V 3.3 V to 5 V 3.3 V to 5 V
Communication Interface CAN control CAN control CAN control CAN control CAN control CAN control
Touch Sensing NXP Touch sensing interface NXP Touch sensing interface NXP Touch sensing interface NXP Touch sensing interface NXP Touch sensing interface NXP Touch sensing interface
Programmable I/O FlexIO FlexIO FlexIO FlexIO FlexIO FlexIO

جیاکەرەوە سەرەکییەکان

  • Exact Flash capacity match with same-footprint family option (بەراورد بەKE16Z32VLF4)
  • More firmware headroom without changing the footprint (بەراورد بەMKE16Z64VLF4)
  • Balanced memory configuration for compact firmware (بەراورد بەMKE16Z16VLF4)

تێبینییەکانی دیزاین

Place the required bypass capacitors adjacent to the associated MKE16Z32VLF4 supply pins and connect them to a low-impedance ground plane. Keep the 48 MHz clock loop compact, route it away from CAN and switching-power nodes, and follow the NXP recommended pin and decoupling layout. The 48-LQFP footprint provides 0.5 mm pitch, so assembly capability, via-in-pad policy, solder mask definition, and land-pattern tolerances should be reviewed before fabrication release.

Design the 3.3 V or 5 V supply with adequate startup margin and verify every peripheral's operating current against the device limit. The 32 KB Flash and 4 KB SRAM provide a compact computing budget, but power behavior depends on clock configuration, active peripherals, CAN activity, and analog channels. Use brownout behavior and reset requirements from the datasheet, and verify supply sequencing if the module operates alongside sensors, displays, or external transceivers.

Separate analog inputs, touch-sensor traces, and communication interfaces according to the NXP layout guidance. Use a continuous ground reference, avoid routing sensitive touch channels beneath fast digital or CAN paths, and keep input conditioning close to the relevant pins. Check the FlexIO and alternate-function assignments in the pin table because changing peripheral assignments can change the PCB net plan even when the package remains the same.

Do not assume that a same-package Kinetis variant is interchangeable without checking memory, temperature grade, qualification, exposed-device status, and pin multiplexing. MKE16Z32VLF4 has a 32 KB Flash limit, and firmware involving secure boot, diagnostics, or field updates may exceed that capacity. Build the bootloader and update mechanism into the memory plan from the start, and validate any alternate order code against the exact operating requirements before substitution.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The product listing identifies RoHS compliance. The automotive qualification, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the selected grade and order code.

داتا پشتڕاستکراوەتەوە لە: 2026-11-19 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MKE16Z32VLF4 MKE16Z32VLF4 datasheet MKE16Z32VLF4 datasheet pdf MKE16Z32VLF4 pinout MKE16Z32VLF4 specifications NXP MKE16Z32VLF4 MKE16Z32VLF4 48-LQFP MKE16Z32VLF4 equivalent MKE16Z32VLF4 replacement MKE16Z32VLF4 vs KE16Z32VLF4 MKE16Z32VLF4 CAN application MKE16Z32VLF4 price

پێکهاتە و زاراوە پەیوەندیدارەکان

NXP Semiconductors MKE16Z32VLF4 KE16Z32VLF4 MKE16Z64VLF4 KE16Z64VLF4 MKE16Z16VLF4 KE16Z16VLF4 Arm Cortex-M0+ Kinetis KE1xZ 32-bit microcontroller embedded microcontroller semiconductor 32 KB Flash 4 KB SRAM 48 MHz CAN controller NXP Touch TSI FlexIO 48-LQFP LQFP package family surface mount industrial control automotive electronics
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ