MSP430F6726IPZ - 16-Bit Metering MCU | Texas Instruments
MPN: MSP430F6726IPZ ✓ چالاکMSP430F6726IPZ گشتی
A metering system-on-chip integrates measurement, computation, communication, and display control into one device. In the product hierarchy, the MSP430F6726 is a mixed-signal microcontroller, then an ultra-low-power MCU, then a system-on-chip designed specifically for electricity-metering functions. Its dedicated analog front end and embedded real-time-clock structure reduce the number of separate components required in a single-phase energy-metering design.
The MSP430F6726IPZ combines 72 I/O pins with 128 KB of Flash and 8 KB of RAM. Two sigma-delta ADCs support energy measurement, while the integrated real-time clock supports timekeeping and calendar functions. The LCD interface is intended for displaying accumulated consumption, status, and configuration information. According to the Texas Instruments MSP430F6726 datasheet, the device is optimized for low supply voltage operation and ultra-low-power consumption, including 265 µA/MHz at 8 MHz and 3.0 V during Flash program execution.
The MSP430 CPU core uses a 16-bit RISC architecture with 16-bit registers and constant generators. Its maximum operating frequency is 25 MHz, providing enough processing bandwidth for metering algorithms, calibration routines, tamper-event handling, and display updates. The mixed-signal architecture separates precision analog measurement functions from the digital control path, helping designers implement repeatable energy measurement without relying on a general-purpose external ADC.
Typical uses include single-phase residential electricity meters, utility endpoint equipment, load monitoring, energy-management gateways, and industrial power-measurement panels. The LCD and real-time-clock integration is particularly useful in compact metering products where display, calendar, and measurement functions must coexist without excessive component count. It also suits designs that periodically wake the MCU, capture measurements, update the display, and return to a low-power state.
Use the manufacturer pin-description table and device pinout diagram when assigning analog inputs, LCD segments, serial interfaces, supply pins, and ground connections in the PCB layout. Place decoupling capacitors close to the supply pins and keep sensitive analog and digital return paths well controlled. Confirm the selected operating frequency, external clock configuration, ADC input range, and display requirements against the device documentation before releasing the PCB.
This product page combines the MSP430F6726IPZ electrical and packaging details with application-specific engineering guidance, verified alternatives, and a focused comparison of competing 100-pin MSP430 metering controllers. It is intended to shorten component-selection work while making the key integration and replacement decisions explicit.
جێگرەوەکانی جێگۆڕکێ بۆ MSP430F6726IPZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MSP430F6726IPZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە CPU Architecture, Number of I/O Pins, Product Type, Program Memory, RAM.
MSP430F6721IPZ
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MSP430F6723IPZ
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MSP430F6724IPZ
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MSP430F6736IPZR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MSP430F6726IPZR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MSP430F6726IPZ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Single-phase metering system-on-chip |
| CPU Architecture | 16-bit RISC MSP430 |
| زۆرترین فرێکوێنسیی کاتژمێر | 25 MHz |
| Program Memory | 128 KB Flash |
| RAM | 8 KB |
| Sigma-Delta ADC Count | 2 |
| Number of I/O Pins | 72 |
| پاکێج | 100-pin LQFP (PZ), 14 mm x 14 mm |
| جۆری دامەزراندن | Surface mount |
| مەودای پلەی گەرمیی کارکردن | -40°C to 85°C |
| ڤۆڵتیەی دابینکردن | 3.0 V to 3.6 V |
| Active Current | 265 µA/MHz at 8 MHz and 3.0 V during Flash program execution |
| Real-Time Clock | Integrated |
| LCD Support | Integrated |
| Oscillator Type | Internal |
| Flash Program Memory Organization | 128K x 8 bits |
| RAM Organization | 8K x 8 bits |
| Orderable Package Suffix | PZ |
ڕێنمایی ڕێکخستنی پینی MSP430F6726IPZ pz
ڕێکخستنی پین بۆ MSP430F6726IPZ (پاکێجی pz). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MSP430F6726IPZ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MSP430F6726IPZ گونجاوە بۆ 6 بەکارھێنانs: Single-Phase Residential Electricity Meter, Utility Load-Monitoring Terminal, Smart Energy-Management Gateway, Industrial Power-Metering Panel, Energy-Saving Submeter, Tamper-Detection Monitoring System.
Single-Phase Residential Electricity Meter
The MSP430F6726IPZ fits a single-phase electricity meter because it combines two sigma-delta ADCs with 128 KB of Flash, 8 KB of RAM, an LCD interface, and an integrated real-time clock in one 100-pin LQFP device. The metering peripherals can capture energy-related analog signals while the 16-bit MSP430 core executes calibration, accumulation, tamper-handling, and display routines. Its low-voltage operating range of 3.0 V to 3.6 V supports compact meter electronics. The principal design consideration is to allocate pins and analog channels according to the manufacturer pin-description table while preserving low-noise separation between measurement and digital circuitry.
پێشنیارکراو
Utility Load-Monitoring Terminal
The MSP430F6726IPZ is suitable for a utility load-monitoring terminal that must measure consumption, retain configuration data, maintain time information, and present readings locally. Its two sigma-delta ADCs support metering-oriented signal acquisition, while 128 KB of Flash provides room for application code and 8 KB of RAM supports working state. The integrated LCD and real-time clock reduce the need for separate display-controller and timekeeping components. Designers should confirm communication-peripheral assignments and available I/O in the 100-pin package, then apply low-power wake sequencing so the terminal operates efficiently between measurement and reporting intervals.
پێشنیارکراو
Smart Energy-Management Gateway
The MSP430F6726IPZ can serve as the low-power measurement controller within a smart energy-management gateway when local metering accuracy and display support are important. Its 25 MHz maximum clock rate supports concurrent metering logic, data conditioning, event handling, and communication routines, while the 72 I/O pins provide flexible peripheral connections. The two sigma-delta ADCs support energy measurement, and the integrated real-time clock allows timestamped consumption records. For gateway designs, isolate analog inputs from switching and communication circuitry, verify interface levels on every assigned pin, and use the MCU's low-power modes to reduce energy use during idle intervals.
پێشنیارکراو
Industrial Power-Metering Panel
The MSP430F6726IPZ fits an industrial power-metering panel that combines real-time measurement, local LCD presentation, event logging, and time-based billing records. Its 128 KB of Flash and 8 KB of RAM provide embedded storage for calibration constants and operating data, while two sigma-delta ADCs support analog measurement channels. The integrated real-time clock can maintain timestamped events, reducing external component requirements. At up to 25 MHz, the 16-bit RISC core can execute measurement processing alongside display and communications. Designers should validate industrial temperature operation across -40°C to 85°C and preserve signal integrity with careful grounding and decoupling.
پێشنیارکراو
Energy-Saving Submeter
The MSP430F6726IPZ is appropriate for a compact energy-saving submeter where two analog measurement channels, local display, and battery-conscious operation are valuable. The device operates at 3.0 V to 3.6 V and the manufacturer reports 265 µA/MHz at 8 MHz and 3.0 V while executing from Flash, supporting efficient measurement cycles. The 16-bit CPU can acquire, filter, scale, and store energy data between display updates. A practical implementation should use the integrated real-time clock for periodic metering schedules and verify the low-power state transitions, wake sources, and LCD drive requirements against the device documentation.
پێشنیارکراو
Tamper-Detection Monitoring System
The MSP430F6726IPZ supports a tamper-detection monitoring system by combining external digital monitoring inputs with its metering-oriented ADC resources and event-processing capability. Its 72 available I/O pins give a designer several routes for sensing switch states, magnetic tampering, or external alarm signals, while 128 KB of Flash accommodates application firmware and 8 KB of RAM supports working buffers. The integrated real-time clock can timestamp relevant events, and the LCD interface can show operating status. Validate every monitoring input, pull-up or pull-down arrangement, and wake behavior in the manufacturer pin and electrical tables before finalizing the circuit.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MSP430F6726IPZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MSP430F6721IPZ | MSP430F6723IPZ | MSP430F6724IPZ | MSP430F6736IPZR | MSP430F6726IPZR |
|---|---|---|---|---|---|---|
| Package | 100-pin LQFP (PZ), 14 mm x 14 mm | 100-pin LQFP (PZ), 14 mm x 14 mm | 100-pin LQFP (PZ), 14 mm x 14 mm | 100-pin LQFP (PZ), 14 mm x 14 mm | 100-pin LQFP (PZ), 14 mm x 14 mm | 100-pin LQFP (PZ), 14 mm x 14 mm |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| CPU Architecture | 16-bit RISC MSP430 | 16-bit MSP430 family | 16-bit MSP430 family | 16-bit MSP430 family | 16-bit RISC MSP430 | 16-bit RISC MSP430 |
جیاکەرەوە سەرەکییەکان
- Dedicated metering integration (بەراورد بەMSP430F6736IPZR)
- Memory capacity for metering firmware (بەراورد بەMSP430F6723IPZ)
- Exact tray-packaged orderable configuration (بەراورد بەMSP430F6726IPZR)
- Large LQFP integration for measurement and display (بەراورد بەMSP430F6724IPZ)
تێبینییەکانی دیزاین
Keep the MSP430F6726IPZ supply network local and decoupled according to the manufacturer pin description. The device operates from 3.0 V to 3.6 V, so routing analog and digital measurement circuitry from the same regulated rail can introduce supply noise into the sigma-delta ADC inputs. Place the required bypass capacitors close to their supply pins, keep the return path continuous, and isolate sensitive analog traces from LCD, communications, and switching-node activity.
Use the manufacturer pin attributes to distinguish analog measurement inputs, LCD outputs, communications, control pins, supply inputs, and reserved locations in the 100-pin LQFP footprint. Do not infer missing pin functions from a similar MSP430F67xx variant. After assignment, check the land pattern, pin-1 orientation, exposed thermal or configuration requirements, and routing of high-current or high-impedance signals before fabrication.
Preserve the integrity of the sigma-delta measurement channels by keeping analog inputs away from LCD drive traces, communication edges, and switching power stages. Use a continuous ground reference beneath the measurement section where practical, minimize loop area, and route sensitive inputs over a quiet plane. Validate the complete layout with meter calibration and noise measurements because the package has 100 positions but only 72 I/O pins, and several positions serve dedicated or reserved functions.
Do not treat the 100-pin package as proof that every MSP430F67xx variant is functionally interchangeable. Confirm ADC configuration, Flash and RAM capacity, LCD segment resources, real-time-clock behavior, communication peripherals, supply levels, and every assigned pin against the exact replacement part. The MSP430F6726IPZR is the same electrical configuration in reel packaging, while other family members require device-specific review.
Estimated: the low-power design should begin with the manufacturer figure of 265 µA/MHz at 8 MHz and 3.0 V during Flash execution. Multiplying by 8 MHz gives an operating current of about 2.12 mA for that stated condition, before adding analog, LCD, communication, and external load current. Use this estimate to size the regulator and battery budget, then measure the final duty cycle because sleep duration and wake events can dominate real energy consumption.
زانیاری پابەندبوون
The device is an industrial-temperature mixed-signal microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status is stated. Compliance should be confirmed from the manufacturer product documentation and the exact orderable part.