Texas Instruments

PCM1702U-J - 20-Bit Audio DAC | Texas Instruments

MPN: PCM1702U-J ✗ کۆتایی ژیان
20-pin SOIC Package
MOQ: 1 |

PCM1702U-J گشتی

Texas Instruments PCM1702U-J is a precision 20-bit digital-to-analog converter designed for audio signal generation in a 20-pin SOIC package. It accepts industry-standard serial audio data, supports 44.1 kHz operation, and uses a BiCMOS process with advanced sign-magnitude architecture to reduce unwanted glitches and nonlinearities around bipolar zero. The converter provides -96 dB typical THD+N at full-scale output and 120 dB typical A-weighted SNR, according to the manufacturer datasheet.

A digital-to-analog converter, or DAC, is an interface IC that converts digital audio samples into a continuous analog voltage. The PCM1702 belongs to the broader digital-to-analog converter category, which sits within data converters, interface ICs, and semiconductor signal-chain components. In a CD player, network audio receiver, digital mixer, or digital audio source, it typically receives interleaved serial data and clock signals, then reconstructs the left and right analog channels through an external output stage.

The PCM1702U-J supports 20-bit audio resolution and 44.1 kHz sampling. Its advanced sign-magnitude architecture is intended to suppress glitch energy when the digital signal crosses zero, improving perceived cleanliness during low-level passages and digital silence transitions. The manufacturer also describes fast settling current as a feature of the converter family. These characteristics make the device relevant to high-fidelity audio designs where low distortion and low-level signal integrity matter.

The BiCMOS implementation combines bipolar and CMOS technologies, a construction commonly used in audio converters to balance analog output performance with digital-interface functionality. The PCM1702 family uses an industry-standard serial audio interface, allowing it to operate with suitable source and transport circuitry. Digital input routing, clocking, de-emphasis filtering, and output-stage design remain external to the converter and must be designed according to the manufacturer application guidance.

Typical uses include CD and digital-audio transport boards, stereo DAC modules, digital mixing consoles, home-theater audio equipment, and embedded digital audio sources. The converter is especially appropriate when a design requires a discrete, high-resolution stereo audio DAC rather than a codec combining conversion with microphone amplification or other mixed-signal functions.

The most important design consideration is preserving a clean analog path after the DAC. Short output traces, suitable ground-return planning, correctly selected reconstruction and load networks, and stable clocking help retain the converter’s low-distortion performance. Decoupling capacitors should be placed close to their supply pins, and unused inputs should follow the pin-description table in the manufacturer datasheet.

This page consolidates the PCM1702U-J datasheet specifications, package details, sourcing questions, comparison parameters, and practical integration notes. It also distinguishes documented drop-in family variants from newer redesign alternatives so engineers can identify whether PCB reuse is realistic or a redesigned audio architecture is required.

جێگرەوەکانی جێگۆڕکێ بۆ PCM1702U-J — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PCM1702U-J (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Architecture, Converter Type, Interface Type, Package, Signal-to-Noise Ratio.

Texas Instruments
Architecture: Advanced sign-magnitude BiCMOS
Converter Type: Audio digital-to-analog converter
Interface Type: Industry-standard serial
بەراوردکردن لەگەڵ PCM1702U-J →
Texas Instruments
Converter Type: Audio digital-to-analog converter
Interface Type: Serial
بەراوردکردن لەگەڵ PCM1702U-J →

PCM1702U

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 20-pin SOIC
Audio digital-to-analog converter · 20 bit · 44.1 kHz · Advanced sign-magnitude BiCMOS · -96 dB typ at full-scale output · None required · 120 dB typ A-weighted · Industry-standard serial

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PCM1702U-K/2K

✅ جێگرەوەی ڕاستەوخۆ
📦 20-pin SOIC
Same PCM1702U family and 20-pin SOIC format; K and 2K suffix differences are not quantified and require manufacturer-ordering confirmation

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PCM1702U-J زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Converter Type 20-bit stereo audio digital-to-analog converter
وردی 20 bit
ڕێژەی نموونەگرتن 44.1 kHz
Architecture Advanced sign-magnitude
Process Technology BiCMOS
THD+N -96 dB typical at full-scale output
Signal-to-Noise Ratio 120 dB typical, A-weighted
Output Behavior Glitch-free around bipolar zero
Settling Fast settling current
Digital Interface Industry-standard serial audio interface
Number of Channels 2 channels
پاکێج 20-pin SOIC
Terminal Count 20 terminals
Terminal Form Gull wing
Package Shape Rectangular
جۆری دامەزراندن Surface mount
External Adjustment None required

ڕێنمایی ڕێکخستنی پینی PCM1702U-J rectangular

ڕێکخستنی پین بۆ PCM1702U-J (پاکێجی rectangular). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی rectangular بۆ PCM1702U-J

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PCM1702U-J.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PCM1702U-J گونجاوە بۆ 6 بەکارھێنانs: CD Player Stereo DAC, High-Fidelity Digital Audio Transport, Digital Mixing Console Output, Home Theater Audio DAC, Network Audio Player, Digital Audio Instrument.

🎧

CD Player Stereo DAC

PCM1702U-J fits a CD-player output stage because it converts 44.1 kHz, 20-bit serial audio into stereo analog signals while providing -96 dB typical THD+N at full-scale output. Its advanced sign-magnitude architecture is intended to suppress glitches and nonlinearities around bipolar zero, which is useful during quiet musical passages and digital-silence transitions. The converter can feed a carefully designed reconstruction and line-output network, provided the board preserves the intended 20-pin SOIC pin assignments and clean analog grounding. Verify external component values and load requirements against the manufacturer’s typical application circuit before release.

🌐

High-Fidelity Digital Audio Transport

The PCM1702U-J is appropriate for a digital transport that accepts compatible serial audio and provides an analog stereo output. Its 20-bit resolution and 44.1 kHz operation align with the classic CD-domain rate, while the documented 120 dB typical A-weighted SNR supports low-noise audio conversion. A transport design should provide stable clock signals, correct channel framing, clean converter supplies, and a carefully laid-out analog section. Because the converter does not perform transport decoding or digital volume control, those functions remain in the source and control electronics.

🎚️

Digital Mixing Console Output

PCM1702U-J can serve as the final conversion stage in a digital mixer when its 44.1 kHz interface and 20-bit resolution meet the system requirements. The -96 dB typical full-scale THD+N and advanced sign-magnitude architecture help preserve low-level detail after digital mixing. In practice, the DAC should be isolated from digital switching activity through deliberate supply and ground partitioning. The analog output stage must also provide adequate current drive and bandwidth for the intended load, with external reconstruction components selected from the manufacturer’s reference configuration.

📺

Home Theater Audio DAC

PCM1702U-J is suitable for a dedicated home-theater DAC module that requires a 20-bit stereo conversion function at 44.1 kHz. Its low documented distortion and noise support accurate reconstruction of audio sourced from CDs or other compatible digital sources. The surrounding analog path remains decisive: use short, symmetric output routing, maintain a continuous ground reference, and avoid sharing sensitive output nodes with digital return currents. The converter should be powered from stable, adequately decoupled supplies, and its analog output network should match the impedance and bandwidth requirements of the following amplifier or line-input stage.

🖥️

Network Audio Player

PCM1702U-J can be used in a network audio player when the upstream audio engine supplies compatible 44.1 kHz serial data and the system benefits from a dedicated high-resolution DAC stage. Its 20-bit format, -96 dB typical THD+N, and 120 dB typical A-weighted SNR are well aligned with high-fidelity playback. Network and decoding circuitry should remain outside the sensitive converter area, while the DAC output feeds a low-noise analog stage. Confirm that the source can provide the required serial word length, channel framing, and clock polarity without additional format conversion.

🎛️

Digital Audio Instrument

PCM1702U-J is relevant to a digital audio instrument that generates low-level stereo signals and requires predictable operation near bipolar zero. The advanced sign-magnitude architecture reduces unwanted glitching and nonlinearities, while the specified 120 dB typical A-weighted SNR supports quiet signal reconstruction. For measurement-grade results, the complete analog path must be evaluated because the converter’s datasheet figures do not include every external amplifier, resistor, capacitor, and load contribution. Use a quiet reference supply, stable grounding, and a shielded enclosure when the instrument operates at low output levels.

What are the key specifications of PCM1702U-J that engineers should know?
The PCM1702U-J is a stereo, 20-bit audio digital-to-analog converter with 44.1 kHz operation, BiCMOS construction, and a 20-pin SOIC package. According to the Texas Instruments PCM1702 datasheet, it uses advanced sign-magnitude architecture, delivers -96 dB typical THD+N at full-scale output, and provides 120 dB typical A-weighted SNR. These figures make it relevant to high-fidelity stereo equipment, CD-player output stages, digital mixers, and transport boards where low-level audio quality is important.
What is PCM1702U-J and what does it do?
PCM1702U-J is a Texas Instruments 20-bit stereo audio DAC that converts serial digital audio data into left- and right-channel analog signals. According to the manufacturer PCM1702 datasheet, its advanced sign-magnitude architecture reduces unwanted glitches and nonlinearities around bipolar zero. The device operates at 44.1 kHz and is intended for high-fidelity audio equipment, including CD players, digital audio transports, mixing equipment, and other systems requiring a dedicated stereo DAC.
Where to download PCM1702U-J datasheet PDF?
The PCM1702U-J datasheet PDF can be accessed through the Texas Instruments PCM1702 document hosted at the media.digikey.com datasheet URL listed on this page. The document describes the 20-bit converter, BiCMOS advanced sign-magnitude architecture, -96 dB typical THD+N, 120 dB typical A-weighted SNR, serial audio operation, and the recommended application circuit. Download the manufacturer document and use its pin-description and application tables when assigning PCB nets.
Where can I find the PCM1702U-J pinout?
The PCM1702U-J pinout is identified in the manufacturer PCM1702 datasheet under the pin-description and package-information sections. The part uses a 20-pin SOIC package with gull-wing terminals. Use the numbered pin-description table to assign analog outputs, digital audio inputs, clocks, control signals, supplies, and grounds. Do not infer an unused pin’s function from visual package position alone, because the SOIC numbering follows the physical lead sequence around the package.
How much distortion does PCM1702U-J provide?
PCM1702U-J provides -96 dB typical THD+N at full-scale output according to the Texas Instruments PCM1702 datasheet. The result describes the combined harmonic distortion and noise performance of the converter under the manufacturer’s specified test conditions. It is a strong fit for high-fidelity audio designs, but real board performance also depends on output loading, analog trace routing, grounding, supply quality, and the quality of the surrounding reconstruction and output stages.
What is the signal-to-noise ratio of PCM1702U-J?
The PCM1702U-J has a 120 dB typical signal-to-noise ratio using the A-weighted measurement method, as stated in the Texas Instruments PCM1702 datasheet. A-weighted SNR describes the converter’s noise relative to a signal under the specified test setup. System-level noise can differ after the DAC because analog amplifiers, resistors, capacitors, grounding, and the digital audio source also contribute noise and distortion.
Why does PCM1702U-J use advanced sign-magnitude architecture?
PCM1702U-J uses advanced sign-magnitude architecture to eliminate unwanted glitches and nonlinearities around bipolar zero, according to the manufacturer datasheet. During digital-silence transitions and low-level passages, the relative timing of positive and negative signal components can affect audible and measurable artifacts. The sign-magnitude approach is intended to reduce those artifacts while preserving the high-resolution conversion and low-noise behavior of the PCM1702 family.
Is PCM1702U-J suitable for a CD-player DAC board?
PCM1702U-J is suitable for a CD-player DAC board when the design provides 44.1 kHz digital audio data, compatible serial clocking, a suitable analog output stage, and clean supplies. Its 20-bit resolution, -96 dB typical THD+N, and 120 dB typical A-weighted SNR align with high-fidelity stereo applications. The converter still needs correct support circuitry, so use the manufacturer’s typical application schematic and pin table during PCB implementation.
PCM1702U-J vs PCM1702U-K — which version should I choose?
PCM1702U-J and PCM1702U-K are related PCM1702U family members, but the suffix denotes a different ordering or grade variant rather than a new converter architecture. Both are associated with the same 20-bit audio DAC family and 20-pin SOIC footprint. Before replacing one with the other, compare the exact ordering table, temperature range, supply requirements, and lifecycle terms in the manufacturer datasheet. The visible cross-reference data establishes the relationship but does not quantify every suffix-level difference.
When should I choose PCM1702U-J over a newer audio DAC?
Choose PCM1702U-J when maintaining an existing 20-pin SOIC audio board, reproducing a known PCM1702 design, or obtaining the specified 20-bit, 44.1 kHz converter family behavior is more important than selecting a newer codec or DAC. PCM1702U-J has documented -96 dB typical THD+N and 120 dB typical A-weighted SNR, but its NRND status makes lifecycle continuity important. A newer device should be selected only after its interface, clocking, supply, and analog-output requirements have been checked.
Is PCM1702U-J suitable for digital mixing and audio processing equipment?
PCM1702U-J can suit digital mixing and processing equipment that requires a dedicated 44.1 kHz stereo DAC output stage. Its 20-bit resolution, advanced sign-magnitude architecture, and specified low-noise performance support high-fidelity conversion. The device does not provide the clocking, sample-rate conversion, gain control, or digital mixing functions normally handled by separate audio engines and interface ICs. Its role is therefore conversion from compatible serial digital audio into analog voltage for downstream amplification.
What is the best drop-in replacement for PCM1702U-J?
PCM1702U is the clearest same-family candidate for evaluating as a drop-in replacement for PCM1702U-J because the cross-reference data identifies it as the base PCM1702U part. It shares the 20-bit converter family and 20-pin SOIC format, but the J suffix must still be checked against ordering, grade, temperature, and lifecycle details before substitution. No newer redesign-level replacement should be treated as drop-in unless its package, pinout, interface, supply, and analog output are verified.
Can PCM1702U-K/2K replace PCM1702U-J without PCB changes?
PCM1702U-K/2K is a same-family candidate for drop-in evaluation because it appears in direct PCM1702U-J comparison results and uses the same 20-pin SOIC device family. However, a final replacement decision requires checking the manufacturer ordering information for the K and 2K suffixes. Confirm pin functions, electrical ratings, temperature grade, lifecycle status, and application-circuit requirements before using it in production. The available comparison confirms family proximity, not every ordering nuance.
Where can I buy PCM1702U-J online?
Use the Request a Quote form on this page to request PCM1702U-J availability, pricing, lot-size information, and delivery scheduling. The PCM1702U-J is an NRND family device, so market status and sourcing conditions should be confirmed before committing a production BOM. The product page is the appropriate channel for obtaining a current quotation without relying on a static listing that may not reflect the exact suffix or package requirements.
What is the price of PCM1702U-J?
Current PCM1702U-J pricing depends on exact suffix, quantity, condition, and market availability. Submit a quantity and requested delivery schedule through the Request a Quote form on this page for a current response. Because PCM1702U is NRND, procurement should also ask about remaining supply, lot traceability, and obsolescence risk. The page does not present a static price figure that could become inaccurate before a quotation is issued.
What is the lead time for PCM1702U-J?
The current lead time for PCM1702U-J should be confirmed through the Request a Quote form on this page by stating the required quantity, date code requirements, and destination. As an NRND device, its lead time may vary more than that of an actively produced IC. Buyers should request written confirmation of allocation, manufacturing status, and delivery schedule before treating any tentative availability statement as a firm procurement commitment.
Is PCM1702U-J currently in stock?
PCM1702U-J availability must be confirmed for the exact suffix and required quantity through the Request a Quote form on this page. The device is identified as NRND, and distributor inventory can change without reflecting the manufacturer’s future production plans. For production use, request current stock, lot and date-code information, and a delivery schedule. For prototypes, a smaller allocation request can help determine whether a direct build is practical.
What is the best Texas Instruments equivalent for PCM1702U-J?
PCM1702U is the best-supported same-manufacturer equivalent candidate because the verified cross-reference directly relates PCM1702U-J to the PCM1702U family and identifies the same 20-bit, advanced sign-magnitude converter family. It retains the 20-pin SOIC format, making it the most relevant PCB-reuse candidate to evaluate. Confirm suffix-specific temperature grade, ordering code, and lifecycle terms in the manufacturer documentation before approving a drop-in substitution.

داتای سەرچاوەی ئەندازیاری بۆ PCM1702U-J — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PCM1702U-J when reproducing a 20-pin PCM1702-based design, maintaining an existing 44.1 kHz stereo DAC board, or prioritizing the family’s documented 20-bit resolution, -96 dB typical THD+N, and advanced sign-magnitude behavior. Evaluate PCM1702U as the closest same-family drop-in candidate because it retains the converter architecture and package, but confirm the exact ordering suffix, temperature grade, and lifecycle terms before substitution. PCM1702U-K/2K is another related 20-pin SOIC candidate found in direct comparison data; verify its suffix-specific electrical and ordering details before production use. For a new design where long-term lifecycle continuity is more important than preserving the PCM1702 footprint, evaluate a newer audio interface or codec instead. A redesign may require a different pinout, clock architecture, supply arrangement, and analog output design.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PCM1702U PCM1702U-K/2K
Package 20-pin SOIC 20-pin SOIC 20-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Resolution 20 bit 20 bit 20 bit
Sampling Rate 44.1 kHz 44.1 kHz 44.1 kHz
Architecture Advanced sign-magnitude Advanced sign-magnitude Advanced sign-magnitude
Process Technology BiCMOS BiCMOS BiCMOS
THD+N -96 dB typical at full-scale output -96 dB typical at full-scale output -96 dB typical at full-scale output
Signal-to-Noise Ratio 120 dB typical, A-weighted 120 dB typical, A-weighted 120 dB typical, A-weighted
Digital Interface Industry-standard serial audio interface Industry-standard serial audio interface Industry-standard serial audio interface
External Adjustment None required None required None required

جیاکەرەوە سەرەکییەکان

  • Documented low-level glitch behavior (بەراورد بەPCM1702U)
  • High-resolution stereo conversion (بەراورد بەPCM1702U-K/2K)
  • Specified full-scale distortion performance (بەراورد بەPCM1702U)
  • A-weighted noise performance (بەراورد بەPCM1702U-K/2K)

تێبینییەکانی دیزاین

Route the PCM1702U-J analog outputs as short, matched paths away from digital clock and serial-data traces. Keep the converter ground and the analog output-return ground closely associated, and avoid passing analog outputs beneath switching nodes or high-current supply paths. The manufacturer application diagram should be used as the PCB-layout baseline. Because the device relies on precise reconstruction behavior, small trace-imbalance differences matter more in a stereo design than a change in individual trace resistance alone.

Place the required bypass capacitors directly at the converter’s supply and ground pins, with the shortest practical return path to the device. Select capacitor voltage ratings, tolerance, and dielectric type according to the manufacturer’s recommended circuit rather than treating every bypass position as interchangeable. Keep switching-regulator output and magnetic components away from the audio section, and use dedicated filtering where necessary. Stable, low-impedance supplies help preserve the documented low-noise and distortion performance.

Do not interchange the J, K, or 2K ordering suffixes without checking the manufacturer ordering table. The verified family comparison establishes that these variants are closely related, but it does not quantify every temperature-grade, packing, or lifecycle distinction. Before a substitution, verify the exact MPN, pinout, operating limits, package, and ordering terms. Also check that the source supplies the required 44.1 kHz serial format and that all external reconstruction and output-stage values match the reference design.

Provide clean, stable serial-data, bit-clock, and system-clock signals with short routing and suitable return paths. Avoid routing these signals beside analog outputs without adequate spacing or a grounded guard structure. Probe clock jitter and data timing at the converter rather than only at the source, because accumulated timing uncertainty can affect the reconstructed waveform. Use the manufacturer’s interface timing and application requirements as the authoritative reference for signal levels and operating conditions.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The available manufacturer and distributor information does not explicitly state the requested compliance fields. PCM1702U is identified as NRND in the available family cross-reference information.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

pcm1702u datasheet PCM1702U-J datasheet PCM1702U-J datasheet pdf PCM1702U-J pinout PCM1702U-J equivalent PCM1702U-J replacement PCM1702U-J vs PCM1702U PCM1702U-J application circuit PCM1702U-J price PCM1702U-J stock Texas Instruments PCM1702U-J PCM1702U 20 pin SOIC DAC

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments PCM1702U-J PCM1702U PCM1702U-K/2K PCM1702U family digital-to-analog converter DAC audio DAC 20-bit converter 44.1 kHz sampling BiCMOS advanced sign-magnitude architecture THD+N signal-to-noise ratio SNR A-weighted SNR glitch-free output fast settling current industry-standard serial audio interface 20-pin SOIC SOIC package surface-mount package CD player digital audio transport high-fidelity audio
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ