PCM55HP/1K - 16-Bit Parallel Audio DAC | Texas Instruments
MPN: PCM55HP/1K ✗ کۆتایی ژیانPCM55HP/1K گشتی
A digital-to-analog converter, or DAC, converts parallel digital sample data into an analog voltage or current signal. The PCM55 family belongs to the broader digital-to-analog converter hierarchy, interface ICs, and semiconductor category. Its parallel interface accepts multi-bit audio data directly from a digital audio subsystem, while the monolithic converter combines a voltage reference, current switches, a resistor ladder, and an output amplifier within one IC.
The PCM55HP/1K provides 16-bit resolution and 15-bit monotonicity, described as typical in the family documentation. Its K-grade total harmonic distortion is listed as -92 dB, and its settling time is listed as 3 microseconds. The device is also associated with 96 dB dynamic range and an audio output of ±1 mA. These characteristics make it relevant to professional audio equipment, digital mixing systems, audio recording hardware, and legacy digital audio interfaces using parallel data paths.
The converter operates from positive and negative analog supplies, with the family documentation identifying ±12 V operation for PCM54-family devices. Signal-interface behavior and compatibility with a particular source therefore depend on the associated clocking, data-latching, and output-conditioning circuitry rather than resolution alone. PCM55HP/1K is specified for commercial temperature-grade use and is supplied in a surface-mount SOIC package with gull-wing terminals.
Using the PCM55HP/1K requires a stable analog supply arrangement, a correctly timed parallel word interface, and an external output stage appropriate to the intended audio level. The converter's ±1 mA output is intended to be conditioned rather than connected directly to a conventional loudspeaker. Designers should also account for digital-interface timing, output settling, and the distinction between logic levels and analog signal levels.
A key design consideration is preserving the relationship between the converter reference, output amplifier, and output network. Grounding and decoupling should follow the manufacturer's application guidance, while long digital traces should be kept away from sensitive analog output paths. Board-level stability and measured distortion can be affected by layout and component choices even when the converter itself is operated within its specified limits.
This product page consolidates the exact package, resolution, interface, performance, and sourcing information for PCM55HP/1K while adding application guidance, selection criteria, and verified-source links. It also distinguishes the exact ordered designation from related PCM55HP variants so engineers can assess replacement decisions without relying on package-name assumptions alone.
جێگرەوەکانی جێگۆڕکێ بۆ PCM55HP/1K — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PCM55HP/1K (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Settling Time, Package, Total Harmonic Distortion, Supply Voltage, Resolution.
PCM55HP
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PCM55HP/1KG6
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PCM55JP
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PCM55HP-1/1K
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PCM55HP/1K
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PCM55HP/1K زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Converter Type | Monolithic audio digital-to-analog converter |
| وردی | 16 bit |
| Monotonicity | 15 bit typical |
| Input Interface | 16-bit parallel |
| Total Harmonic Distortion | -92 dB, K grade |
| Settling Time | 3 us |
| Dynamic Range | 96 dB |
| Audio Output Current | +/-1 mA |
| ڤۆڵتیەی دابینکردن | +/-12 V for the PCM54 family |
| پاکێج | 24-SOIC, 0.295 inch, 7.50 mm width |
| Terminal Count | 24 |
| جۆری دامەزراندن | Surface mount |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
| Manufacturer Description | 16-bit audio DAC with parallel word input |
ڕێنمایی ڕێکخستنی پینی PCM55HP/1K rectangular
ڕێکخستنی پین بۆ PCM55HP/1K (پاکێجی rectangular). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PCM55HP/1K.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PCM55HP/1K گونجاوە بۆ 6 بەکارھێنانs: Professional Audio Signal Conversion, Digital Audio Mixing System, Audio Recording Interface, Legacy Digital Audio Equipment, Digital Synthesis and Waveform Generation, Broadcast and Studio Monitoring.
Professional Audio Signal Conversion
The PCM55HP/1K fits professional audio signal-conversion stages that require a 16-bit parallel-input DAC and analog current output. Its listed 3 us settling time and 96 dB dynamic range provide useful targets for waveform reconstruction, while the K-grade distortion listing of -92 dB supports low-distortion audio-path design. The converter should follow a digital audio source with compatible word timing and use an output stage designed for its ±1 mA output. Suitable implementation requires clean positive and negative analog supplies, careful grounding, and short analog traces that keep switching and digital-interface noise away from the output network.
پێشنیارکراو
Digital Audio Mixing System
The PCM55HP/1K can serve as a parallel digital-to-analog stage in a mixing or routing architecture that accepts 16-bit audio words. Its 15-bit typical monotonicity and -92 dB K-grade total harmonic distortion are relevant when preserving small amplitude steps and limiting added distortion. Parallel input timing must be aligned with the associated latch and word-select signals, and the converter output should feed a suitable low-noise audio amplifier. Supply decoupling and analog ground planning are especially important because switching currents from surrounding digital logic can otherwise affect the reference and output stages.
پێشنیارکراو
Audio Recording Interface
The PCM55HP/1K is appropriate for a recording or playback interface that converts a parallel digital audio stream into a controlled analog output. Its 16-bit resolution supports the digital word width used by the converter, and the listed 96 dB dynamic range provides a defined basis for playback-chain design. Because the output is specified at ±1 mA, an external amplifier, reconstruction filter, and gain network will normally be required. Keep the converter's analog path physically separated from processor clocks and serial communications, and verify the selected switching and level-conversion circuitry for the required audio bandwidth.
پێشنیارکراو
Legacy Digital Audio Equipment
The PCM55HP/1K is a practical fit when maintaining or reproducing legacy professional audio equipment that uses a parallel-input PCM55-family converter. Retaining the original 16-bit parallel architecture can avoid redesigning the source-data interface and may preserve established calibration and output-network behavior. Integration requires exact verification of pin assignments, supply polarity, logic thresholds, and the original output stage because the device uses positive and negative analog rails. Before replacing a populated board, compare the fitted suffix and package marking with the ordered part and bench-test the interface timing before inserting it into a critical signal chain.
پێشنیارکراو
Digital Synthesis and Waveform Generation
The PCM55HP/1K can be used in waveform-generation systems where a parallel digital representation is converted into an analog signal for later filtering and amplification. Its 3 us settling time is the key timing value for checking whether the converter settles sufficiently before the next sample interval. The device's resistor-ladder and output-amplifier architecture supports direct analog generation, but the external reconstruction network still determines high-frequency image rejection. Designers should use the manufacturer's recommended output network and ensure the digital update timing meets the converter's requirements across the full sampling rate.
پێشنیارکراو
Broadcast and Studio Monitoring
The PCM55HP/1K can serve in broadcast or studio monitoring equipment where parallel digital audio is converted to an analog line-level signal through external amplification. The listed -92 dB K-grade distortion and 96 dB dynamic range make its converter performance relevant to monitoring quality, although system noise and output-network errors will also affect the result. Use low-noise power supplies, maintain symmetrical return paths, and isolate converter ground currents from sensitive monitor-amplifier inputs. The ±1 mA output should be conditioned through a designed gain stage rather than used as a direct speaker drive.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PCM55HP/1K — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PCM55HP | PCM55HP/1KG6 | PCM55JP | PCM55HP-1/1K |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 24-SOIC (0.295 inch, 7.50 mm Width) | 24-SOIC (0.295 inch, 7.50 mm Width) | 24-SOIC (0.295 inch, 7.50 mm Width) | 24-SOIC (0.295 inch, 7.50 mm Width) | 24-SOIC (0.295 inch, 7.50 mm Width) |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Input Interface | 16-bit parallel | Parallel word input | Parallel word input | Parallel word input | Parallel word input |
| Converter Type | Monolithic audio digital-to-analog converter | Digital-to-analog converter | PCM55HP family converter | Digital-to-analog converter | DAC, audio, 16-bit parallel |
جیاکەرەوە سەرەکییەکان
- Exact 16-bit parallel PCM55HP architecture (بەراورد بەPCM55HP)
- Documented 24-SOIC footprint (بەراورد بەPCM55JP)
- K-grade distortion listing (بەراورد بەPCM55HP/1KG6)
- Monolithic analog output stage (بەراورد بەPCM55HP-1/1K)
تێبینییەکانی دیزاین
Separate the 16-bit parallel bus from the analog output network and place bypass capacitors close to the relevant supply and ground pins. Route the bus away from the converter's ±1 mA output and reconstruction-filter components to minimize coupled switching noise. Keep the analog return path continuous and avoid routing high-current digital or power-return currents through the converter area.
Use clean positive and negative analog supplies with local high-frequency decoupling at the converter. The family documentation identifies ±12 V operation for PCM54-family devices, but the exact recommended PCM55HP supply limits must be checked in the manufacturer datasheet before circuit release. Confirm startup, shutdown, and power-sequencing behavior in the complete system.
The parallel input bus must meet the converter's setup and hold requirements, and associated latch or word-select signals must be timed for the required sample rate. Account for the listed 3 us settling time when scheduling sample updates. Avoid long stubs and use a consistent source and termination arrangement so that data transitions do not create timing or crosstalk problems.
Do not connect the ±1 mA converter output directly to a loudspeaker or assume that the digital input accepts serial audio. Verify the exact PCM55HP/1K suffix, package marking, pin assignments, and temperature grade before substitution. Also confirm that positive and negative rails are present because a single-supply implementation requires additional biasing and output-stage design.
زانیاری پابەندبوون
The available product records do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for PCM55HP/1K. AEC-Q100 qualification is not applicable to this commercial-grade audio converter.